Assessment of Post Fire Structural Strengths of Normal Strength Concrete Subjected to Cyclic Thermal Loadings

Raheem, Akeem Ayinde and Olowu, O. A. and Awe, E. M. and Ebokaiwe, G. and Akinniyi, I. A and Bamigboye, Gideon and Busari, A. A. (2015) Assessment of Post Fire Structural Strengths of Normal Strength Concrete Subjected to Cyclic Thermal Loadings. Civil and Environmental Research , 7 (9). pp. 75-83. ISSN ISSN 2224-5790 (Paper) ISSN 2225-0514 (Online)

PDF Download (1MB)

Abstract

Concrete is a composite construction material consisting basically of a binder, aggregates, water and with or without admixture to modify either or both its physical and chemical properties. The rate at which concrete structures especially buildings are gutted by fire hazards is on the increase and this has adverse effect on the strength, hence, the need to assess the post fire structural strengths of Normal Strength Concrete(NSC). NSC of grade 50 was produced and cast into specimens of sizes 150mm cubes and 100mm x 100mm x 500mm reinforced concrete beams. The concrete cubes and beams were subjected to elevated cyclic thermal loadings after 7, 14 and 28 days of curing, while the rate of heating was maintained at 1oC/min until the target temperature of (100, 130, 160, 200 and 250)o C where attained and this was maintained for one hour and then allowed to cool at 1oC/min to room temperature of 32oC. Unstressed Residual Uniaxial Compressive Test (URUCT and Flexural Strength Test (FST) were conducted on the cubes and reinforced concrete beams, respectively. Direct Tensile Strength Test (DTST) was performed on the high yield (460N/mm2) steel reinforcement. The result showed that the residual compressive strengths of concrete cubes decreases with increase thermal loadings. The expected strengths of 0.69 and 0.97 of the 28 days strength for 7 and 14 days respectively were met. The flexural strengths decrease with increase in thermal loadings. The flexural strength of the concrete beams at 28 days of 15.25N/mm2 at thermal loading of 32oC was reduced to 8.16/mm2 at thermal loading of 160oC; while the strength at 14 days of 12.19 N/mm2 at thermal loading of 32oC was reduced to 7.62N/mm2 at thermal loading of 160oC and finally, the strength at 7 days of 10.13N/mm2 at thermal loading of 32oC was reduced to 5.82N/mm2 at thermal loading of 160oC. All the results met the specification for high yield steel of 12% elongation at fracture. It was concluded that within the thermal loading range adopted, the tensile strength of the reinforcement was not impaired beyond the limit specified by the code.

Item Type:	Article
Uncontrolled Keywords:	Normal Strength Concrete, Thermal loadings, Unstressed Residual Strength Test, Fire hazard
Subjects:	T Technology > TA Engineering (General). Civil engineering (General)
Divisions:	Faculty of Engineering, Science and Mathematics > School of Civil Engineering and the Environment
Depositing User:	Mrs Patricia Nwokealisi
Date Deposited:	13 Dec 2016 13:24
Last Modified:	13 Dec 2016 13:24
URI:	http://eprints.covenantuniversity.edu.ng/id/eprint/7472

Actions (login required)

View Item