Items where Author is "Azeta, Joseph"

Azeta, Joseph and Ayoade, Idowu and Nwakanma, Cosmas and Akande, Timileyin (2023) Implementing a Prototype Autonomous Fire Detecting and Firefighting Robot. control and systems engineering, 1.

Oluwabunmi, T. L. and Adenugba, O. and Ayoade, I. A. and Azeta, Joseph and Bolu, C. A. (2022) Development of an Autonomous Vehicle for Smart Irrigation. In: Information Technology for Education and Development (ITED), 01-03 November 2022, Abuja, Nigeria.

Azeta, Joseph and Bolu, Christian and Oyawale, Festus A. (2022) DESIGN AND SIMULATION OF A MOBILE ROBOT PLATFORM FOR NAVIGATION AND OBSTACLE DETECTION. Engineering Review. pp. 56-65.

Monk, S. D. and Jorgensen, E. and McCulloch, A. and Peacock, R. and Sangprachatanaruk, I. and Azeta, Joseph and Bolu, Christian and Taylor, C. J. (2022) A Prototype Telepresence Robot for Use in the Investigation of Ebola and Lassa Virus Threatened Villages in Nigeria. In: The 27th International Conference on Systems Engineering, 2020, Online.

Owodolu, T. and Azeta, Joseph and Bolu, Christian (2021) Development of a Low Cost Ventilator using a Proportional Solenoid Valve. International Journal of Emerging Trends in Engineering Research, 9 (10). pp. 1357-1360. ISSN 2347 - 3983

Essien, V. and Bolu, Christian and Azeta, Joseph and Okokpujie, Imhade P. and Kilanko, O. O and Afolalu, Sunday A. (2021) Application of Data Logger for Monitoring Indoor and Outdoor Temperature of Buildings: A Review. In: International Conference on Engineering for Sustainable World, 2021, Online.

Bolu, Christian and Azeta, Joseph and Mallo, Stephen J. and Ismail, S. O and Dada, J.A and Aderounmu, Sola and Ismail, Abubakar and Oyetunji, Elkannah (2021) Engineering Students’ Virtual Learning Challenges during COVID-19 Pandemic Lockdown: A Case Study. IEEE Xplore Digital Library. ISSN 2165-4301

Owolabi, T. and Bolu, Christian and Azeta, Joseph and Okokpujie, Imhade P. and Kilanko, O. O (2021) Mechanical Ventilator for Respiratory Impaired Persons: Review. In: International Conference on Engineering for Sustainable World, 2020, Online.

Essien, V. B. and Bolu, Christian and Okokpujie, Imhade P. and Azeta, Joseph (2021) Prediction and Performance Investigation of Polyurethane Foam as Thermal Insulation Material for Roofing Sheet Using Artificial Neural Network. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 82 (1). pp. 113-125. ISSN 2289-7879

Azeta, Joseph and Bolu, Christian and Alele, F. and Daranijo, E. O. (2020) Design of a Wireless Communication Drip Irrigation System using nRF24L01 Technology. International Journal of Engineering Research and Technology, 13 (6). pp. 1307-1313. ISSN 0974-3154,

Fajobi, M. A. and Salawu, Enesi Y. and Azeta, Joseph and Dirisu, J. O. and Ajayi, O. O. and Onwordi, Patrick Nwanne (2020) Development of a Human Powered Pedal Washing MACHINE. In: 6th International Conference on Advanced Engineering and Technology, 2020, Online.

Fajobi, M. A. and Salawu, Enesi Y. and Azeta, Joseph and Dirisu, Joy Favour and Ajayi, O. O. and Onwordi, Patrick Nwanne (2020) Development of a Human Powered Pedal Washing MACHINE. In: 6th International Conference on Advanced Engineering and Technology, 2020, Online.

Chidera, M. and Kilanko, O. O and Azeta, Joseph and Bolu, Christian (2020) An LDR Based Colour Sensor for Urine Analysis: A Review. International Journal of Emerging Trends in Engineering Research, 8 (10). ISSN 2347 - 3983

Azeta, Joseph and Bolu, Christian and Oyawale, F. A. (2020) Modeling and Design of a Humanoid Robot by Additive Manufacturing Process. International Journal of Engineering Research and Technology, 13 (6). pp. 1266-1272. ISSN 0974-3154

Monk, S. D. and Jorgensen, E. and McCulloch, A. and Peacock, R. and Sangprachatanaruk, I. and Azeta, Joseph and Bolu, Christian and Taylor, C. J. (2020) A Prototype Telepresence Robot for Use in the Investigation of Ebola and Lassa Virus Threatened Villages in Nigeria. In: 27th International Conference on Systems Engineering, ICSEng, 07 January 2021, Online.

Salawu, Enesi Y. and Ajayi, O. O. and Fajobi, M. A. and Ishola, Felix and Azeta, Joseph (2020) Structural Fabrication and Dynamic Simulation of Stress of a Vibrosieve for Efficient Industrial Applications. Advances in Manufacturing Engineering. pp. 715-724.

Ishola, Felix and Dare, Ademola Adebukola and Azeta, Joseph and Sanni, T.F. and Akinlabi, Stephen A. (2020) Technical Feasibility and Econometrics of a Small Hydro Power Plant for a Farm Settlement in Nigeria. In: Lecture Notes in Electrical Engineering book series, 17 December 2019, Online.

Azeta, Joseph and Bolu, Christian and Hinvi, D. (2019) 2019 8th International Conference on Mechatronics and Control Engineering. In: 8th International Conference on Mechatronics and Control Engineering, 2019, Online.

Azeta, Joseph and Bolu, Christian and Hinvi, D. and Abioye, Abiodun A. and Boyo, H.O. and Anakhu, Peter I. and Onwordi, Patrick Nwanne (2019) An Android Based Mobile Robot for Monitoring and Surveillance. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019, Online.

Azeta, Joseph and Bolu, Christian and Alele, F. and Daranijo, E. O. and Onyeubani, P. and Abioye, Abiodun A. (2019) Application of Mechatronics in Agriculture: A review. In: International Conference on Engineering for Sustainable World, 2019, Online.

Dirisu, J. O. and Adegoke, D.D. and Azeta, Joseph and Ishola, Felix and Okokpujie, Imhade P. and Aworinde, Abraham K. (2019) Ergonomics of domestic building structure on occupants’ health. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Azeta, Joseph and Ishola, Felix and Akinpelu, T. and Bolu, Christian and Dirisu, Joy Favour and Fajobi, M. A. and Salawu, Enesi Y. (2019) An Experimental Evaluation of LTA on the performance of a drone. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Ibhadode, Osagie and Adekunle, A.A. and Azeta, Joseph and Abimiku, Y. K. (2019) AN INVESTIGATION OF THE INFLUENCE OF FEMTOCELLS NETWORK ON A SMALL SIZE INDOOR ENVIRONMENT USING ITU-R AND WINNER II PATH LOSS MODELS. In: International Conference on Engineering for Sustainable World Journal of Physics: Conference Series 1378 (2019) 032020, 2019, Online.

Azeta, Joseph and Bolu, Christian and Hinvi, D. and Abioye, Abiodun A. (2019) Obstacle detection using ultrasonic sensor for a mobile robot. In: International Conference on Mechatronics and Control Engineering.

Azeta, Joseph and Ishola, Felix and Akinpelu, T. and Dirisu, J. O. and Okokpujie, Imhade P. and Ibhadode, Osagie (2019) Performance Evaluation of Developed Mathematical Models of Hot Air Balloon for Drone Application. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019, Online.

Ishola, Felix and Azeta, Joseph and Agbi, George and Olatunji, Obafemi and Oyawale, Fetus A (2019) Simulation for Material Selection for a Pico Pelton Turbine’s Wheel and Buckets. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019, Online.

Bolu, Christian and Azeta, Joseph and Alele, F. and Daranijo, E. O. and Onyeubani, P. and Abioye, Abiodun A. (2019) Solar Powered Microcontroller-based Automated Irrigation System with Moisture Sensors. In: International Conference on Engineering for Sustainable World, 2019, Online.

Azeta, Joseph and Salawu, Enesi Y. and Fajobi, M. A. and Ajayi, O. O. and Dirisu, Joy Favour and Onwardi, Patrick N. and Aworinde, Abraham K. (2019) Technical Innovations for Developing Countries: The Case of a Human‐Powered Fruit Blender. International Journal of Mechanical Engineering and Technology, 10 (3). pp. 673-679.

Azeta, Joseph and Okokpujie, Imhade P. and Okokpujie, Kennedy O. and Salawu, Enesi Y. (2018) ANALYTICAL STUDY OF A ROAD TRAFFIC CONFLICT AT THE T-JUNCTION OF UNIVERSITY OF BENIN MAIN GATE. International Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 1048-1061. ISSN 0976-6316

Okokpujie, Imhade P. and Okokpujie, Kennedy O. and Nwoke , Obinna N. and Azeta, Joseph (2018) Design and Implementation of 0.5kw Horizontal Axis Wind Turbine for Domestic Use. In: Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2018. London, U.K, pp. 650-655.

Okokpujie, Imhade P. and Okokpujie, Kennedy O. and Nwoke , Obinna N. and Azeta, Joseph (2018) DEVELOPMENT OF A 0.5KW HORIZONTAL AXIS WIND TURBINE. Journal of Engineering and Applied Sciences, 13 (8). pp. 2202-2208. ISSN 1816-949X

Salawu, Enesi Y. and Okokpujie, Imhade P. and Afolalu, Sunday A. and Ajayi, O. O. and Azeta, Joseph (2018) INVESTIGATION OF PRODUCTION OUTPUT FOR IMPROVEMENT. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 915-922. ISSN 2249-6890

Enesi, Salawu Y and Okokpujie, Imhade P. and Afolalu, Sunday A. and Ajayi, O. O. and Azeta, Joseph (2018) INVESTIGATION OF PRODUCTION OUTPUT FOR IMPROVEMENT. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 915-922. ISSN 2249-8001

Ibhadode, Osagie and Oyedepo, Sunday Olayinka and Ogunro, Steve and Azeta, Joseph and Banjo, SolomonO. and Umanah, I. I. and Apeh, E.S. and Ayoola, A. R. (2018) An Experimental-assessment of Human Exposure-levels to Aircraft Noise-hazards in the Neighbouring-environments of four Nigerian Airports. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Anakhu, Peter I. and Bolu, Christian and Abioye, Abiodun A. and Azeta, Joseph (2018) Fused Deposition Modeling Printed Patterns for Sand Casting in a Nigerian Foundry: A Review. International Journal of Applied Engineering Research, 13 (7). pp. 5113-5119. ISSN 0973-4562

Anakhu, Peter I. and Bolu, Christian and Abioye, Abiodun A. and Onyiagha, G. and Boyo, H.O. and Jolayemi, K. and Azeta, Joseph (2018) Innovative Foundry Technology and Material Using Fused Deposition Modeling and Polylactic Acid Material in Sand Casing. A R C H I V E S o f F O U N D R Y E N G I N E E R I N G, 18 (2). pp. 65-71. ISSN 2299-2944

Anakhu, Peter I. and Abioye, Abiodun A. and Bolu, Christian and Azeta, Joseph (2018) Modeling of the kinematic geometry of spur gears using matlab. In: MATEC Web of Conferences.

Azeta, Joseph and Bolu, Christian and Abioye, Abiodun A. and Oyawale, Fetus A (2018) A review on humanoid robotics in healthcare. In: MATEC Web of Conferences, 2017.

Okokpujie, Imhade P. and Okokpujie, Kennedy O. and Ajayi, O. O. and Azeta, Joseph and Obinna, Nwoke N. (2017) Design, Construction and Evaluation of a Cylinder Lawn Mower. Journal of Engineering and Applied Sciences. pp. 1254-1260. ISSN 1816-949X

Azeta, Joseph and Bolu, Christian and Abioye, Abiodun A. and Oyawale, Fetus A (2017) A review on humanoid robotics in healthcare. In: MATEC Web of Conferences.

Azeta, Joseph and Okokpujie, Kennedy O. and Okokpujie, Imhade P. and Osemwegie, Omoruyi and Chibuzor, Alexander (2016) A Plan for Igniting Nigeria’s Industrial Revolution. International Journal of Scientific & Engineering Research, 7 (11). p. 489. ISSN 2229-5518