Items where Author is "Bolu, Christian"

Group by: Item Type | No Grouping

Jump to: Article | Book Section | Conference or Workshop Item

Number of items: 73.

Article

Azeta, Joseph and Bolu, Christian and Oyawale, Festus A. (2022) DESIGN AND SIMULATION OF A MOBILE ROBOT PLATFORM FOR NAVIGATION AND OBSTACLE DETECTION. Engineering Review. pp. 56-65.

Owodolu, T. and Azeta, Joseph and Bolu, Christian (2021) Development of a Low Cost Ventilator using a Proportional Solenoid Valve. International Journal of Emerging Trends in Engineering Research, 9 (10). pp. 1357-1360. ISSN 2347 - 3983

Bolu, Christian and Azeta, Joseph and Mallo, Stephen J. and Ismail, S. O and Dada, J.A and Aderounmu, Sola and Ismail, Abubakar and Oyetunji, Elkannah (2021) Engineering Students’ Virtual Learning Challenges during COVID-19 Pandemic Lockdown: A Case Study. IEEE Xplore Digital Library. ISSN 2165-4301

Okokpujie, Imhade P. and Ohunakin, O.S. and Bolu, Christian (2021) Multi-objective optimization of machining factors on surface roughness, material removal rate and cutting force on end-milling using MWCNTs nano-lubricant. Progress in Additive Manufacturing, 6. pp. 155-178.

Essien, V. B. and Bolu, Christian and Okokpujie, Imhade P. and Azeta, Joseph (2021) Prediction and Performance Investigation of Polyurethane Foam as Thermal Insulation Material for Roofing Sheet Using Artificial Neural Network. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 82 (1). pp. 113-125. ISSN 2289-7879

Okokpujie, Imhade P. and Bolu, Christian and Ohunakin, O.S. (2020) Comparative performance evaluation of TiO2, and MWCNTs nano-lubricant effects on surface roughness of AA8112 alloy during end-milling machining for sustainable manufacturing process. The International Journal of Advanced Manufacturing, 108. pp. 1473-1497.

Azeta, Joseph and Bolu, Christian and Alele, F. and Daranijo, E. O. (2020) Design of a Wireless Communication Drip Irrigation System using nRF24L01 Technology. International Journal of Engineering Research and Technology, 13 (6). pp. 1307-1313. ISSN 0974-3154,

Okokpujie, Imhade P. and Ohunakin, O.S. and Bolu, Christian and Adelekan, D.S and Akinlabi, Esther T. (2020) Experimental Analysis of the Influence of Depth of Cut, Time of Cut, and Machining Speed on Vibration Frequency during Turning of AL1060 Alloy. International Journal of Advanced Trends in Computer Science and Engineering, 9 (4). pp. 6783-6789. ISSN 2278-3091

Okokpujie, Imhade P. and Bolu, Christian and Ohunakin, O.S. and Akinlabi, Esther T. (2020) Experimental Study of the Effect of TiN–Zn Coated High-Speed Steel Cutting Tool on Surface Morphology of AL1060 Alloy During Machining Operation. Trends in Manufacturing and Engineering Management. pp. 637-647.

Okokpujie, Imhade P. and Okonkwo, Ugochukwu C. and Bolu, Christian and Ohunakin, O.S. and Agboola, Mayowa G. and Atayero, A. A. (2020) Implementation of multi-criteria decision method for selection of suitable material for development of horizontal wind turbine blade for sustainable energy generation. Heliyon, 6.

Chidera, M. and Kilanko, O. O and Azeta, Joseph and Bolu, Christian (2020) An LDR Based Colour Sensor for Urine Analysis: A Review. International Journal of Emerging Trends in Engineering Research, 8 (10). ISSN 2347 - 3983

Azeta, Joseph and Bolu, Christian and Oyawale, F. A. (2020) Modeling and Design of a Humanoid Robot by Additive Manufacturing Process. International Journal of Engineering Research and Technology, 13 (6). pp. 1266-1272. ISSN 0974-3154

Babalola, P.O. and Inegbenebor, A.O. and Bolu, Christian and John, Shella I. (2019) COMPARISON OF THE MECHANICAL CHARACTERISTICS OF ALUMINIUM SIC COMPOSITES CAST IN SAND AND METAL MOULDS. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2). pp. 1671-1681. ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Ayuba, Emmanuel O. and Bolu, Christian and John, Temitope M. and Abioye, Abiodun A. (2018) Dataset showing Steel Cold Rolling Process Parameters for a 6-High Cold Rolling Mill in Nigeria. Data in Brief.

Owodolu, A.A. and Bolu, Christian and Abioye, Abiodun A. and Boyo, H.O. and Onyiagha, G. (2018) A Systematic Human Counting at Guest House using Sensing Device Technique. International Journal of Scientific and Research Publications, 8 (3). pp. 377-379. ISSN 2250-3153

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Oyedepo, Sunday Olayinka and Kilanko, O. O and Adeyemi, Gideon Adewale (2018) Application of solar photovoltaic system to power air blower and mixing mechanism in a tilting furnace. World Review of Science, Technology and Sust. Development, X (Y, xxx). pp. 1-10.

Okokpujie, Imhade P. and Ohunakin, O.S. and Bolu, Christian and Okokpujie, Kennedy O. (2018) Experimental data-set for prediction of tool wear during turning of Al-1061alloy by high speed steel cutting tools. Data in Brief, 18. pp. 1196-1203. ISSN 2352-3409

Anakhu, Peter I. and Bolu, Christian and Abioye, Abiodun A. and Azeta, Joseph (2018) Fused Deposition Modeling Printed Patterns for Sand Casting in a Nigerian Foundry: A Review. International Journal of Applied Engineering Research, 13 (7). pp. 5113-5119. ISSN 0973-4562

Anakhu, Peter I. and Bolu, Christian and Abioye, Abiodun A. and Onyiagha, G. and Boyo, H.O. and Jolayemi, K. and Azeta, Joseph (2018) Innovative Foundry Technology and Material Using Fused Deposition Modeling and Polylactic Acid Material in Sand Casing. A R C H I V E S o f F O U N D R Y E N G I N E E R I N G, 18 (2). pp. 65-71. ISSN 2299-2944

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. (2017) Artificial Neural Network Prediction of Aluminium Metal Matrix Composite with Silicon Carbide Particles Developed Using Stir Casting Method. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 15 (6). pp. 151-158.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Kilanko, O. O and Oyedepo, Sunday Olayinka and Odunfa, K. M. (2017) Producing AA1170 Based Silicon Carbide Particulate Composite through Stir Casting Method. Asian Journal of Materials Chemistry, 2 (3). pp. 1-5.

Inegbenebor, A.O. and Bolu, Christian and Babalola, P.O. and Inegbenebor, A. I. and Fayomi, O. S. I (2016) Aluminum Silicon Carbide Particulate Metal Matrix Composite Development Via Stir Casting Processing. Springer. ISSN 1570-646X

Inegbenebor, A.O. and Bolu, Christian and Babalola, P.O. and Inegbenebor, A. I. and Fayomi, O. S. I (2016) Influence of the Grit size of Silicon Carbide Particles on the Mechanical and Electrical Properties of Stir Casting Aluminum Matrix Composite Material. Springer, 8 (4). pp. 573-578. ISSN 1570-646X

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. (2015) Artificial Neural Network Prediction of Aluminium Metal Matrix Composite with Silicon Carbide Particles Developed Using Stir Casting Method. International Journal of Mechanical & Mechatronics Engineering, 15 (2).

Babalola, P.O. and Inegbenebor, A.O. and Bolu, Christian and Inegbenebor, A. I. (2015) The Development of Molecular-Based Materials for Electrical and Electronic Applications. The Journal of The Minerals, Metals & Materials Society (TMS), 67 (4). pp. 830-833. ISSN 1047-4838

Bolu, Christian and Nkiko, Christopher and Adewumi, A. O. (2015) OPTIMAL SELECTION OF DIGITAL ASSET MANAGEMENT SYSTEMS IN ACADEMIC LIBRARIES: LEVERAGING ON COVENANT UNIVERSITY MODEL. Library Philosophy and Practice (e-journal). ISSN 1522-0222

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Odunfa, K. M. (2014) Development of Aluminium Matrix Composites: A review. Online International Journal of Engineering and Technology Research, 2. pp. 1-11. ISSN 2346-7452

Nkiko, Christopher and Bolu, Christian and Michael-Onuoha, Happiness Chijioke (2014) Managing a Sustainable Institutional Repository: The Covenant University Experience. Samaru Journal of Information, 14 (1 & 2). pp. 1-6.

Bolu, Christian and Egbo, Ken (2014) The Role of Higher Education Institutions in the Development of ICT Professionals for Innovation in Nigeria. International Journal of Engineering Innovation & Research, 3 (1). ISSN 2277 – 5668

Bolu, Christian and Adewumi, A. O. and Egbo, Ken (2014) Towards Making World-Class Universities: Case Study of the Role of Information and Communication Technology. International Journal of Advanced Research in IT and Engineering.

Bolu, Christian (2013) Modeling Maintenance Productivity Measurement of Engineering Production Systems: Discrete Event Simulation Approach. International Journal of Mechanical & Mechatronics Engineering, 13 (05).

Fayomi, O. S. I and Gbenebor, O. P and Abdulwahab, M and Bolu, Christian and Popoola, A. P. I. (2013) Structural Modification, Strengthening Mechanism and Electrochemical Assessment of the Enhanced Conditioned AA6063-type Al-Mg-Si Alloy. Journal of New Materials for Electrochemical Systems 16.

Bolu, Christian and Sharma, Rajiv and Malik, Rishi (2012) Fine-tuning Central Banks Web Communications: Usability Tests & Content Management. International Journal of Engineering and Technology , 2 (10). pp. 1786-1801. ISSN 2049-3444

Bolu, Christian (2012) The church in the contemporary world: Information and communication technology in church communication for growth: A case study. Journal of Media and Communication Studies, 4 (4). pp. 80-94. ISSN 2141-2545

Bolu, Christian and Ifeanacho, Ikechukwu C. (2012) Achieving Access to Knowledge through E-Learning: A Case Study. International Journal of Engineering and Technology, 2 (10). pp. 1780-1785. ISSN 2049-3444

Babalola, P.O. and lnegbenebor, A. O. and Bolu, Christian (2012) Design and construction of tilting furnace for producing aluminium matrix composites. Proc. ICCEM. 260- 271.

Bolu, Christian (2011) Title. Mechanical Engineering Lectures. (Unpublished)

Bolu, Christian (1983) Forecasting Nigerian aluminium demand. The Nigerian Engineer, 18 (3).

Bolu, Christian (1983) Forecasting Nigerian aluminium demand. The Nigerian Engineer, 18 (3). pp. 123-130.

Book Section

Okokpujie, Imhade P. and Bolu, Christian and Ohunakin, O.S. and Akinlabi, Esther T. (2020) Experimental Study of the Effect of TiN–Zn Coated High-Speed Steel Cutting Tool on Surface Morphology of AL1060 Alloy During Machining Operation. In: Trends in Manufacturing and Engineering Management. Springer Nature, pp. 637-647. ISBN ISBN978-981-15-4744-7  Online ISBN978-981-15-4745-4

Nkiko, Christopher and Bolu, Christian and Michael-Onuoha, Happiness Chijioke (2016) DIGITIZATION AND ADMISSIBILITY OF DIGITAL RECORDS IN NIGERIAN COURTS: STRATEGIES AND LESSONS FOR THE LIS PROFESSION. In: Providing Sustainable and Equitable Access to Information: Perspectives from Nigeria. Tai Solarin University of Education Press ljagun, Ogun State, Nigeria, ljagun, Ogun State, Nigeria, pp. 432-449. ISBN 978-978-956-607-5

Conference or Workshop Item

Monk, S. D. and Jorgensen, E. and McCulloch, A. and Peacock, R. and Sangprachatanaruk, I. and Azeta, Joseph and Bolu, Christian and Taylor, C. J. (2022) A Prototype Telepresence Robot for Use in the Investigation of Ebola and Lassa Virus Threatened Villages in Nigeria. In: The 27th International Conference on Systems Engineering, 2020, Online.

Essien, V. and Bolu, Christian and Azeta, Joseph and Okokpujie, Imhade P. and Kilanko, O. O and Afolalu, Sunday A. (2021) Application of Data Logger for Monitoring Indoor and Outdoor Temperature of Buildings: A Review. In: International Conference on Engineering for Sustainable World, 2021, Online.

Owolabi, T. and Bolu, Christian and Azeta, Joseph and Okokpujie, Imhade P. and Kilanko, O. O (2021) Mechanical Ventilator for Respiratory Impaired Persons: Review. In: International Conference on Engineering for Sustainable World, 2020, Online.

Fayomi, O. S. I and Adedeji, Adeola A. and Agboola, O. and Ajala, M.O. and Bolu, Christian and Banjo, SolomonO. and Udoye, Nduka Ekene (2021) Role of Biomaterials in Automation. In: International Conference on Energy and Sustainable Environment, 2021, Online.

Banjo, SolomonO. and Babalola, P.O. and osagie, I. and Joseph, O. O and Williams, Akan B. and Fayomi, O. S. I and Bolu, Christian and Afolalu, Sunday A. (2020) Design and development of a table-mounted manual drilling machine for the rural purpose. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Monk, S. D. and Jorgensen, E. and McCulloch, A. and Peacock, R. and Sangprachatanaruk, I. and Azeta, Joseph and Bolu, Christian and Taylor, C. J. (2020) A Prototype Telepresence Robot for Use in the Investigation of Ebola and Lassa Virus Threatened Villages in Nigeria. In: 27th International Conference on Systems Engineering, ICSEng, 07 January 2021, Online.

Azeta, Joseph and Bolu, Christian and Hinvi, D. (2019) 2019 8th International Conference on Mechatronics and Control Engineering. In: 8th International Conference on Mechatronics and Control Engineering, 2019, Online.

Azeta, Joseph and Bolu, Christian and Hinvi, D. and Abioye, Abiodun A. and Boyo, H.O. and Anakhu, Peter I. and Onwordi, Patrick Nwanne (2019) An Android Based Mobile Robot for Monitoring and Surveillance. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019, Online.

Azeta, Joseph and Bolu, Christian and Alele, F. and Daranijo, E. O. and Onyeubani, P. and Abioye, Abiodun A. (2019) Application of Mechatronics in Agriculture: A review. In: International Conference on Engineering for Sustainable World, 2019, Online.

Azeta, Joseph and Ishola, Felix and Akinpelu, T. and Bolu, Christian and Dirisu, Joy Favour and Fajobi, M. A. and Salawu, Enesi Y. (2019) An Experimental Evaluation of LTA on the performance of a drone. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Okokpujie, Imhade P. and Ohunakin, O.S. and Adelekan, D.S and Bolu, Christian and Gill, Jatinder and Atiba, Opemipo E. and AGHEDO, MOSES AMOS (2019) Experimental Investigation of Nano-Lubricants Effects on Temperature Distribution of Mild Steel Machining. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019, Online.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Kilanko, O. O and Ongbali, Samson O. (2019) Modification to Metal Matrix Composites Nomenclature. In: International Conference on Engineering for Sustainable World, 2019, Online.

Azeta, Joseph and Bolu, Christian and Hinvi, D. and Abioye, Abiodun A. (2019) Obstacle detection using ultrasonic sensor for a mobile robot. In: International Conference on Mechatronics and Control Engineering.

Okokpujie, Imhade P. and Bolu, Christian and Ohunakin, O.S. and Akinlabi, Esther T. and Adelekan, D.S (2019) A Review of Recent Application of Machining Techniques, based on the Phenomena of CNC Machining Operations. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019, Online.

Bolu, Christian and Azeta, Joseph and Alele, F. and Daranijo, E. O. and Onyeubani, P. and Abioye, Abiodun A. (2019) Solar Powered Microcontroller-based Automated Irrigation System with Moisture Sensors. In: International Conference on Engineering for Sustainable World, 2019, Online.

Anakhu, Peter I. and Bolu, Christian and Abioye, Abiodun A. and Onyiagha, G. (2018) Cost-effectiveness Management of a Compressed-air System Using an Energy Analysis Application. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Owodolu, A.A. and Bolu, Christian and Ayuba, Samuel U. and Babaremu, Kunle (2018) Development of a Counting System Method for Managing Crowd Using Image Sensing Device. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Owodolu, A.A. and Bolu, Christian and Abioye, Abiodun A. and Efemwenkiekie, K. U. (2018) Development of a System for Counting of People Using MultiCamera and Sensors. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Babalola, P.O. and Kilanko, O. O and Bolu, Christian and Inegbenebor, A.O. and Oyawale, Fetus A and Adeosun, Oluropo (2018) Empirical Models for Mechanical and Electrical Characteristics of Wrought Aluminium Alloy Reinforced with Silicon Carbide Particles. In: IOP Conf. Series: Materials Science and Engineering.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Kilanko, O. O (2018) Graphical Representations of Experimental and ANN Predicted Data for Mechanical and Electrical Properties of AlSiC Composite Prepared by Stir Casting Method. In: IOP Conf. Series: Materials Science and Engineering.

Anakhu, Peter I. and Abioye, Abiodun A. and Bolu, Christian and Azeta, Joseph (2018) Modeling of the kinematic geometry of spur gears using matlab. In: MATEC Web of Conferences.

Abioye, Abiodun A. and Atanda, P. O. and Abioye, Oluwabunmi P. and Akinlabi, Stephen A. and Akinlabi, Esther T. and Bolu, Christian and Afolalu, Sunday A. and Ajayi, O. O. and Ohijeagbon, I. O. (2018) A Review on Automotive Industries and Foundries in Nigeria. In: IOP Conf. Series: Materials Science and Engineering.

Azeta, Joseph and Bolu, Christian and Abioye, Abiodun A. and Oyawale, Fetus A (2018) A review on humanoid robotics in healthcare. In: MATEC Web of Conferences, 2017.

Anakhu, Peter I. and Abioye, Abiodun A. and Bolu, Christian and Azeta, A. A. (2017) Modeling of the kinematic geometry of spur gears using matlab. In: MATEC Web of Conferences.

Azeta, Joseph and Bolu, Christian and Abioye, Abiodun A. and Oyawale, Fetus A (2017) A review on humanoid robotics in healthcare. In: MATEC Web of Conferences.

Bolu, Christian and Ademisoye, O.T and Alimi, Adeshina (2012) University Optical Fibre Network Access Optimisation: A Case Study. In: 2012 International Conference on Clean Technology and Engineering Management (ICCEM 2012), 12th-15th, Mechanical Engineering,Covenant University,Ota,Nigeria.

Bolu, Christian (2010) Innovation: Strategy for Growth and Development. In: Nigerian Institute of Industrial Engineers, 22 April 2010, Ibadan, Nigeria.

Bolu, Christian (2010) Large Scale Document Management System: Creating Effective Public Sector Knowledge Management System. In: Nigerian Institute of Industrial Engineers, 22 April 2010, Ibadan, Nigeria.

Bolu, Christian (2010) Large Scale Document System:Effective Public Sector Knowledge Management System. In: Nigerian Institute of Industrial Engineers, 22 April 2010, Ibadan, Nigeria.

Mani, Ramachandran and Bolu, Christian (1984) THE ENGINEERING CHALLENGE FOR COST EFFECTIVE STEEL SCRAP RECOVERY IN NIGERIA. In: "STEEL AND PETROCHEMICALS - ENGINEERING CHALLENGES FOR THE FUTURE", 6TH -- 8TH DECEMBER, 1984, DAULA HOTEL, KANO..

This list was generated on Thu Nov 21 19:19:21 2024 WAT.