Items where Author is "Abioye, Abiodun A."

Group by: Item Type | No Grouping

Jump to: Article | Book Section | Conference or Workshop Item

Number of items: 81.

Article

Ajayi, O. O. and Agarana, M. C. and Akinwumi, I. I. and Okokpujie, Imhade P. and Salawu, Enesi Y. and Abioye, Abiodun A. and Afolalu, Sunday A. and Leramo, R.O. (2019) MODELLING RATE OF TRAFFIC-INDUCED BUILDING VIBRATIONS IN SANGO-OTA, NIGERIA: AN ASSUMPTION BASED ANALYSIS. WIT Transactions on The Built Environment, 182. pp. 303-313. ISSN 1743-3509

Ayuba, Emmanuel O. and Bolu, Christian and John, Temitope M. and Abioye, Abiodun A. (2018) Dataset showing Steel Cold Rolling Process Parameters for a 6-High Cold Rolling Mill in Nigeria. Data in Brief.

Michael, E. and Liman, A.D. and Adimula, G.M. and Fajobi, M. A. and Abioye, Abiodun A. (2018) Development of Automatic Switch using PIR and SSR for Day and Night Detection. Covenant Journal of Engineering Technology (CJET), 1 (1). pp. 47-57.

Owodolu, A.A. and Bolu, Christian and Abioye, Abiodun A. and Boyo, H.O. and Onyiagha, G. (2018) A Systematic Human Counting at Guest House using Sensing Device Technique. International Journal of Scientific and Research Publications, 8 (3). pp. 377-379. ISSN 2250-3153

Okokpujie , Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O and Okonkwo , Ugochukwu C. and Orodu, Kale B. and Ikumapayi, O. M. (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ajayi, O. O. and Afolalu, Sunday A. and Fajobi, M. A. (2018) MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF DUCTILE IRON PRODUCED FROM FUEL - FIRED ROTARY FURNACE. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 694-704. ISSN 0976-6359

Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ajayi, O. O. and Afolalu, Sunday A. and Fajobi, M. A. and Atanda, P. O. (2018) MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF DUCTILE IRON PRODUCED FROM FUEL - FIRED ROTARY FURNACE. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 694-704. ISSN 0976-6359

Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O and Okonkwo , Ugochukwu C. and Orodu, Kale B. and Ikumapayi, O. M. (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Odunlami, O. A. and Elehinafe , F. Boluwaji and Okorie, C. G. and Abioye, Oluwabunmi P. and Abioye, Abiodun A. and Fakinle, B. S. (2018) ASSESSMENT OF IN-TRICYCLE EXPOSURE TO CARBON MONOXIDE EMISSION ON ROADS IN NIGERIAN URBAN CENTRES. International Journal of Mechanical Engineering and Technology (IJMET), 9 (9). pp. 671-684. ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Afolalu, Sunday A. and Abioye, Abiodun A. and Udo, Mfon .O and Adetunji, Olajide R. and Ikumapayi, O. M. and Adejuyigbe, Samuel B. (2018) Data showing the effects of temperature and time variances on nano-additives treatment of mild steel during machining. Data in Brief, 19. pp. 456-461.

Afolalu, Sunday A. and Asonaminasom, Ezekiel H and Ongbali, Samson O. and Abioye, Abiodun A. and Udo, Mfon .O and Salawu, Enesi Y. (2018) Dataset on experimental investigation of optimum carburizing temperature and holding time of bi-nano additives treatment of AISI 5130 steel. Data in Brief, 19. pp. 2279-2283.

Afolalu, Sunday A. and Asonaminasom, Ezekiel H and Ongbali, Samson O. and Abioye, Abiodun A. and Udo, Mfon .O and Salawu, Enesi Y. (2018) Dataset on experimental investigation of optimum carburizing temperature and holdingtime of bi-nano additives treatment of AISI 5130 steel. Data in Brief, 19. pp. 2279-2283.

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Okokpujie, Imhade P. and Asere, A.A. and Oyekunle, J.A and Afolalu, Sunday A. and Abioye, Abiodun A. (2018) Effects of Emission Characteristics on Elemental Composition of Selected PVC Ceiling Materials. Materials Focus, 7. pp. 1-7.

Dirisu, Joy Favour and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Okokpujie, Imhade P. and Asere, A.A. and Oyekunle, J.A and Afolalu, Sunday A. and Abioye, Abiodun A. (2018) Effects of Emission Characteristics on Elemental Composition of Selected PVC Ceiling Materials. Materials Focus, 7. pp. 1-7.

Anakhu, Peter I. and Bolu, Christian and Abioye, Abiodun A. and Azeta, Joseph (2018) Fused Deposition Modeling Printed Patterns for Sand Casting in a Nigerian Foundry: A Review. International Journal of Applied Engineering Research, 13 (7). pp. 5113-5119. ISSN 0973-4562

Afolalu, Sunday A. and Ongbali, Samson O. and Abioye, Abiodun A. and Ajayi, O. O. and Adelakun, Oluwasegun J and Abdulkareem, Ademola (2018) INVESTIGATION OF EFFECTS OF DAMPED AND NON-DAMPED SYSTEM ON A PLATFORM STRUCTURE. International Journal of Advance Research, 3 (6). pp. 1-9. ISSN 2320-9135

Anakhu, Peter I. and Bolu, Christian and Abioye, Abiodun A. and Onyiagha, G. and Boyo, H.O. and Jolayemi, K. and Azeta, Joseph (2018) Innovative Foundry Technology and Material Using Fused Deposition Modeling and Polylactic Acid Material in Sand Casing. A R C H I V E S o f F O U N D R Y E N G I N E E R I N G, 18 (2). pp. 65-71. ISSN 2299-2944

Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Abioye, Oluwabunmi P. and Abioye, Abiodun A. and Afolalu, Sunday A. and Udo, Mfon .O (2018) NUMERICAL INVESTIGATION OF STRESS AND STRAIN DISTRIBUTION IN EQUAL CHANNEL ANGULAR EXTRUSION OF AL 6063 ALLOY. International Journal of Civil Engineering and Technology, 9 (11). pp. 522-531. ISSN 0976-6308 and ISSN Online: 0976-6316

Abioye, Oluwabunmi P. and Abioye, Abiodun A. and Afolalu, Sunday A. and Ongbali, Samson O. (2018) A REVIEW OF BIODEGRADABLE PLASTICS IN NIGERIA. International Journal of Mechanical Engineering and Technology (IJMET), 9 (10). ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Akinwole, Ifeoluwa Emmanuel and Alebiowu, G and Oyatogun, Grace Modupe and Abere, Dare Victor and Oluwasegun, K.M and Oyatogun, Oyeniran Amos and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Adenigba, A.E and Ayodele, T.J (2018) Synthesis and Characterization of Cowry and Crab Shells Based Chitosan for Drug Delivery. Bioceramics Development and Applications, 8 (1). pp. 1-6. ISSN 2090-5025

Olanipekun, Ayorinde Tayo and Abioye, Abiodun A. and Oluwabunmi, Kayode Emmanuel (2018) Time-Dependent Ginzburg–Landau equation modelling of electron beam additive manufactured Titanium alloy. Leonardo Electronic Journal of Practices and Technologies, 32. pp. 93-102. ISSN 1583-1078

Orisanmi , B.O and Afolalu, Sunday A. and Adetunji, Olayide R. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Akinyemi , O.O and Abioye, Oluwabunmi P. (2017) Cost of Corrosion of Metallic Products in Federal University of Agriculture, Abeokuta. International Journal of Applied Engineering Research, 12 (24). pp. 14141-14147. ISSN ISSN 0973-4562

Abioye, Oluwabunmi P. and Abioye, Abiodun A. and Atanda, P. O. and Osinkolu , G. A and Folayan , A. J, (2017) NUMERICAL SIMULATION OF OUTER DIE ANGLE OF EQUAL CHANNEL ANGULAR EXTRUSION PROCESS. International Journal of Mechanical Engineering and Technology (IJMET), 8 (12). pp. 264-273. ISSN 0976-6359

Abere, Dare Victor and Oyatogun, Grace Modupe and Abioye, Abiodun A. and Rominiyi, Azeez Lawan and Abioye, Oluwabunmi P. and Yaskuma, U. and Onotu, G. O. and Ogar, M. O. and Oyatogun, Oyeniran Amos and Igbonwelundu, Magnus T. and Filusi, G. F. and Akinwole, Ifeoluwa Emmanuel (2017) Comparative Study of Local Mining Methods and Assay of Cassiterite with other Alluvial Mineral Deposits in Kuru-Jantar, Plateau State, Nigeria. American Journal of Mining and Metallurgy, 4 (1). pp. 51-61.

Dirisu, Joy Favour and Asere, A.A. and Oyekunle, J.A and Ajayi, O. O. and Afolalu, Sunday A. and Joseph, O. O and Abioye, Abiodun A. (2017) Comparison of the Elemental Structure and Emission Characteristics of Selected PVC and Non PVC Ceiling Materials Available in Nigerian Markets. International Journal of Applied Engineering Research, 12 (23). pp. 14755-14758. ISSN 0973-4562

Dirisu, J. O. and Asere, A.A. and Oyekunle, J.A and Adewole, B.Z and Ajayi , Oluseyi O. and Afolalu, Sunday A. and Joseph, O. O and Abioye, Abiodun A. (2017) Comparison of the Elemental Structure and Emission Characteristics of Selected PVC and Non PVC Ceiling Materials Available in Nigerian Markets. International Journal of Applied Engineering Research, 12 (23). pp. 13755-13758. ISSN 0973-4562

Orisanmi, B.O and Afolalu, Sunday A. and Adetunji, Olajide R. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Akinyemi, I. O. and Abioye, Oluwabunmi P. (2017) Cost of Corrosion of Metallic Products in Federal University of Agriculture, Abeokuta. International Journal of Applied Engineering, 12 (24). pp. 14141-14147. ISSN 0973-4562

Oyebisi, S.O and Olutoge, F. A. and Ofuyatan, Olatokunbo M. and Abioye, Abiodun A. (2017) Effect of corncob ash blended cement on the properties of lateritic interlocking blocks. Progress in Industrial Ecology, An International Journal, 11 (4). pp. 373-387. ISSN 1476-8917

Abere, Dare Victor and Oyatogun, Grace Modupe and Akinwole, Ifeoluwa Emmanuel and Abioye, Abiodun A. and Rominiyi, Azeez Lawan and Igonwelundu, Magnus T. (2017) Effects of Increasing Chitosan Nanofibre Volume Fraction on the Mechanical Property of Hydroxyapatite. American Journal of Materials Science and Engineering, 5 (1). pp. 6-16.

Afolalu, Sunday A. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Udo, Mfon .O and Adetunji, Olajide R. and Ikumapayi, Omolayo M. (2017) Experimental Analysis of the Wear Properties of Carburized HSS (ASTM A600) Cutting Tool. International Journal of Applied Engineering Research, 12 (19). pp. 8995-9003. ISSN 0973-4562

Afolalu, Sunday A. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Udo, Mfon .O and Adetunji, Olajide R. and Ikumapayi, O. M. (2017) Experimental Analysis of the Wear Properties of Carburized HSS (ASTM A600) Cutting Tool. International Journal of Applied Engineering Research, 12 (19). pp. 8995-9003. ISSN 0973-4562

Olanipekun, Ayorinde Tayo and Oluwabunmi, Kayode Emmanuel and Abioye, Abiodun A. and Rominiyi, Azeez Lawan and Balogun, Oluwayomi Peter and Sanusi, Kazeem Oladiti and Faola, Aderonke Esther (2017) Inventing a New Africa through Discovery and Innovations in Computational Material Science. European Journal of Applied Engineering and Scientific Research, 5 (2). pp. 14-19. ISSN 2278-0041

Abere, Dare Victor and Oyatogun, Grace Modupe and Rominiyi, Azeez Lawan and Abioye, Abiodun A. and Akinwole, Ifeoluwa Emmanuel and Igbonwelundu, Magnus T. and Oyatogun, Oyeniran Amos and Dagwai, Clive Na’andur and Abioye, Oluwabunmi P. (2017) Investigation of Physicochemical and Mechanical Property of UTAN Granites for Building Applications. American Journal of Mining and Metallurgy, 4 (1). pp. 37-44.

Abioye, Abiodun A. and Atanda, P. O. and Abioye, Oluwabunmi P. and Afolalu, Sunday A. and Dirisu, J. O. (2017) Microstructural Characterization and Some Mechanical Behaviour of Low Manganese Austempered Ferritic Ductile Iron. International Journal of Applied Engineering Research, 12 (23). pp. 14435-14441. ISSN 0973-4562

Abioye, Abiodun A. and Atanda, P. O. and Abioye, Oluwabunmi P. and Afolalu, Sunday A. and Dirisu, Joy Favour (2017) Microstructural Characterization and Some Mechanical Behaviour of Low Manganese Austempered Ferritic Ductile Iron. International Journal of Applied Engineering Research, 12 (23). pp. 14435-14441. ISSN 0973-4562

Mbada, Ndubuisi I. and Atanda, P. O. and Aponbiede, O. and Abioye, Abiodun A. and Ugbaja, Michael I. and Alabi, Ayomide Samuel (2016) Performance Evaluation of Suitability of Carbonized Palm Kernel Shell (PKS) as a Veritable Alternative to Coal and Charcoal in Solid Fuel Fired Furnaces. International Journal of Metallurgical Engineering, 5 (1). pp. 15-20.

Adetunji, Adelana Razak and Abioye, Abiodun A. and Isadare, Dayo Adeyemi and Akinluwade, K. J. (2015) Material Selection for Crusher Jaw in a Jaw Crusher Equipment. International Journal of Materials Engineering, 5 (2). pp. 17-22.

Abioye, Abiodun A. and Atanda, P. O. and Majolagbe, S. B. and Isadare, Dayo Adeyemi and Abioye, Oluwabunmi P. and Akinluwade, K. J. and Adetunji, Adelana Razak (2015) Material Selection for Gas Turbine Blade Coating Using GRANTA Material Selector. Advances in Research, 5 (1). pp. 1-9. ISSN 2348-0394

Atanda, P. O. and Abioye, Abiodun A. and Iyiola, A. O. (2015) Mechanical Behaviour and Microstructural Characterization of Carbon Steel Samples from Three Selected Steel Rolling Plants. American Journal of Engineering Research (AJER), 4 (11). pp. 47-56. ISSN 2320-0847

Majolagbe, S. B. and Abioye, Abiodun A. and Akinluwade, K. J. and Adesina, Olumide S and Adetunji, Adelana Razak (2015) Radiation Effects: Recommendations for Safe Plasma/Flame Cutting Operation. Journal of Scientific Research & Reports, 6 (3). pp. 237-242. ISSN 2320-0227

Abioye, Abiodun A. and Atanda, P. O. and Kolawole, O. F. and Olorunniwo, O. E. and Adetunji, Adelana Razak and Abioye, Oluwabunmi P. and Akinluwade, K. J. (2015) The Thermal Analysis of Fuel Fired Crucible Furnace Using Autodesk Inventor Simulation Software. Advances in Research, 5 (3). pp. 1-7. ISSN 2348-0394

Atanda, P. O. and Abioye, Abiodun A. and Olorunniwo, O. E. and Oluwole, O. O. (2014) Material Selection for Fuel Fired Crucible Furnace Using GRANTA. International Journal of Scientific & Engineering Research, 5 (7). ISSN 2229-5518

Atanda, P. O. and Olorunniwo, O. E. and Abioye, Abiodun A. and Oluwole, O. O. (2014) Modeling heat flow across fuel-fired crucible furnace using ADINA. International Journal of Scientific & Engineering Research, 5 (7). pp. 608-614. ISSN 2229-5518

Oluwabunmi, Kayode Emmanuel and Adeleke, Abraham Adewale and Adetunji, Adelana Razak and Jeje, Samson Olaitan and Abioye, Abiodun A. and Adesina, A.A. and Ayeni, Fatai Afolabi and Ibitoye, Folahan Peter (2014) 2k Factorial Experiments on Factors that Influence the Recovery of Gold during the Upgrade of Ilesha-Itagunmodi Gold Ore through Froth Flotation. Journal of Minerals and Materials Characterization and Engineering, 2. pp. 32-39.

Joseph, O. O and Afolalu, Sunday A. and Abioye, Abiodun A. and Agbo, S. E. and Olatunde, S. F. and Omotehinwa, O. S. Effect of TiC addition on the mechanical properties and microstructure of Al-Si alloy. Materials Today: Proceedings.

Book Section

Ajayi, O. O. and Omowa, Olasubomi F. and Abioye, Oluwabunmi P. and Omotosho, Olugbenga Adeshola and Akinlabi, Esther T. and Akinlabi, Stephen A. and Abioye, Abiodun A. and Owoeye, T. F. and Afolalu, Sunday A. (2018) Finite Element Modelling of Electrokinetic Deposition of Zinc on Mild Steel with ZnO-Citrus sinensis as Nano-Additive. In: CFD Modeling and Simulation in Materials Processing 2018. The Minerals, Metals & Materials Society Spinger, pp. 199-211. ISBN 978-3-319-72059-3

Abioye, Abiodun A. and Fayomi, O. S. I and Popoola, A. P. I. and Abioye, Abiodun A. (2017) Equal Channel Angular Extrusion Characteristics on Mechanical Behavior of Aluminum Alloy. In: Aluminium Alloys - Recent Trends in Processing, Characterization, Mechanical Behavior and Applications. INTECH, pp. 263-277.

Abioye, Abiodun A. and Fayomi, O. S. I and Popoola, A. P. I. and Abioye, Oluwabunmi P. (2017) Equal Channel Angular Extrusion Characteristics on Mechanical Behavior of Aluminum Alloy. In: Aluminium Alloys – Recent Trends in Processing, CharaAluminium Alloys – Recent Trends in Processing, Characterization, Mechanical behavior and Applicationscterization, Mechanical behavior and Applications. INTECH.

Conference or Workshop Item

Afolalu, Sunday A. and Yusuf, Olabisi O. and Abioye, Abiodun A. and Emetere, Moses and Ongbali, Samson O. and Samuel, O.D. (2021) BIOFUEL; A SUSTAINABLE RENEWABLE SOURCE OF ENERGY-A REVIEW. In: International Conference on Energy and Sustainable Environment.

Afolalu, Sunday A. and Salawu, Enesi Y. and Joseph, O. O and Oladipupo, Segun Isaac and Emetere, Moses and Ongbali, Samson O. and Abioye, Abiodun A. and Akinlabi, Stephen A. (2021) Overview Impacts of Heat Treatment Techniques on Grain Structures of a Steel. In: International Conference on Engineering for Sustainable World, 2021, Online.

Afolalu, Sunday A. and Oladipupo, Segun Isaac and Ongbali, Samson O. and Abioye, Abiodun A. and Abdulkareem, Ademola and Udo, Mfon .O and Ajayi, O. O. (2020) Queueing Theory an Index Factor for Production Inventory Control in Automotive Industry—A Review. In: Trends in Manufacturing and Engineering Management, 2020, Online.

Azeta, Joseph and Bolu, Christian and Hinvi, D. and Abioye, Abiodun A. and Boyo, H.O. and Anakhu, Peter I. and Onwordi, Patrick Nwanne (2019) An Android Based Mobile Robot for Monitoring and Surveillance. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019, Online.

Azeta, Joseph and Bolu, Christian and Alele, F. and Daranijo, E. O. and Onyeubani, P. and Abioye, Abiodun A. (2019) Application of Mechatronics in Agriculture: A review. In: International Conference on Engineering for Sustainable World, 2019, Online.

Afolalu, Sunday A. and Efekodha, Great E. and Ongbali, Samson O. and Abioye, Abiodun A. and Salawu, Enesi Y. and Ajayi, O. O. and Oluwabunmi, Abioye P. (2019) Experimental Analysis of the Effect of Tri-Nano Additives on Wear Rate of Mild Steel during Machining. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Afolalu, Sunday A. and Soetan, S. B. and Ongbali, Samson O. and Abioye, Abiodun A. and Oni, A.S (2019) Impact of activated–flux tungsten inert gas (a-tig) welding on weld joint of a metal – Review. In: 1st International Conference on Sustainable Infrastructural Development, 2019, Online.

Afolalu, Sunday A. and Soetan, S. B. and Ongbali, Samson O. and Abioye, Abiodun A. and Oni, A.S (2019) Morphological characterization and physio-chemical properties of nanoparticle - review. In: 1st International Conference on Sustainable Infrastructural Development, 2019, Online.

Azeta, Joseph and Bolu, Christian and Hinvi, D. and Abioye, Abiodun A. (2019) Obstacle detection using ultrasonic sensor for a mobile robot. In: International Conference on Mechatronics and Control Engineering.

Bolu, Christian and Azeta, Joseph and Alele, F. and Daranijo, E. O. and Onyeubani, P. and Abioye, Abiodun A. (2019) Solar Powered Microcontroller-based Automated Irrigation System with Moisture Sensors. In: International Conference on Engineering for Sustainable World, 2019, Online.

Anakhu, Peter I. and Bolu, Christian and Abioye, Abiodun A. and Onyiagha, G. (2018) Cost-effectiveness Management of a Compressed-air System Using an Energy Analysis Application. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Owodolu, A.A. and Bolu, Christian and Abioye, Abiodun A. and Efemwenkiekie, K. U. (2018) Development of a System for Counting of People Using MultiCamera and Sensors. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Olatunji, Obafemi and Akinlabi, Stephen A. and Ajayi, O. O. and Abioye, Abiodun A. and Ishola, Felix and Peter, Mashinini and Madushele, Nkosinathi (2018) Electric Power Crisis in Nigeria: A Strategic Call for Change of Focus to Renewable Sources. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Ajayi, O. O. and Omowa, Olasubomi F. and Omotosho, Olugbenga Adeshola and Abioye, Oluwabunmi P. and Akinlabi, Esther T. and Akinlabi, Stephen A. and Abioye, Abiodun A. and Owoeye, Taiwo Felicia and Afolalu, Sunday A. (2018) Experimental Investigation of the Effect of ZnO-Citrus sinensis Nano-additive on the Electrokinetic Deposition of Zinc on Mild Steel in Acid Chloride. In: 147th Annual Meeting & Exhibition Supplemental Proceedings.

Ajayi, O. O. and Omowa, Olasubomi F. and Abioye, Oluwabunmi P. and Omotosho, Olugbenga Adeshola and Akinlabi, Esther T. and Akinlabi, Stephen A. and Abioye, Abiodun A. and Owoeye, T. F. and Afolalu, Sunday A. (2018) Finite Element Modelling of Electrokinetic Deposition of Zinc on Mild Steel with ZnO-Citrus sinensis as Nano-Additive. In: TMS 2018: CFD Modeling and Simulation in Materials Processing, 13 January 2018, Online:.

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel (ASTM A36). In: 6th International Conference on Nano and Materials Science, 2018.

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel(ASTM A36). In: International Conference on Nano and Materials Science.

Afolalu, Sunday A. and Abioye, Abiodun A. and Dirisu, J. O. and Okokpujie, Imhade P. and Ajayi, O. O. and Adetunji, Olajide R. (2018) Investigation of Wear Land and Rate of Locally Made HSS Cutting Tool. In: International Conference on Nano and Materials Science AIP Conf..

Anakhu, Peter I. and Abioye, Abiodun A. and Bolu, Christian and Azeta, Joseph (2018) Modeling of the kinematic geometry of spur gears using matlab. In: MATEC Web of Conferences.

Abioye, Abiodun A. and Atanda, P. O. and Abioye, Oluwabunmi P. and Akinlabi, Stephen A. and Akinlabi, Esther T. and Bolu, Christian and Afolalu, Sunday A. and Ajayi, O. O. and Ohijeagbon, I. O. (2018) A Review on Automotive Industries and Foundries in Nigeria. In: IOP Conf. Series: Materials Science and Engineering.

Afolalu, Sunday A. and Oluwaseyifunmi, Orenuga and Ongbali, Samson O. and Abioye, Abiodun A. and Okokpujie, Imhade P. and Olamilekan, Oloyede R (2018) The Study of the Impact of Nano Carbon Additives on Astm A53 Mild Steel During Machining. In: IOP Conf. Series: Materials Science and Engineering.

Afolalu, Sunday A. and Okokpujie, Imhade P. and Salawu, Enesi Y. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ikumapayi, O. M. (2018) Study of the Performances of Nano-Case Treatment Cutting Tools on Carbon Steel Work Material during Turning Operation. In: International Conference on Nano and Materials Science.

Afolalu, Sunday A. and Okokpujie, Imhade P. and Salawu, Enesi Y. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ikumapayi, O. M. (2018) Study of the Performances of Nano-Case Treatment Cutting Tools on Carbon Steel Work Material during Turning Operation. In: 6th International Conference on Nano and Materials Science AIP Conf. Proc.

Azeta, Joseph and Bolu, Christian and Abioye, Abiodun A. and Oyawale, Fetus A (2018) A review on humanoid robotics in healthcare. In: MATEC Web of Conferences, 2017.

Anakhu, Peter I. and Abioye, Abiodun A. and Bolu, Christian and Azeta, A. A. (2017) Modeling of the kinematic geometry of spur gears using matlab. In: MATEC Web of Conferences.

Azeta, Joseph and Bolu, Christian and Abioye, Abiodun A. and Oyawale, Fetus A (2017) A review on humanoid robotics in healthcare. In: MATEC Web of Conferences.

This list was generated on Thu Nov 21 14:33:19 2024 WAT.