Items where Author is "Awoyera, P. O."

Group by: Item Type | No Grouping

Number of items: 128.

Bheel, panelNaraindas and Awoyera, P. O. and Shar, Irfan Ali and Kirgiz, Mehmet S. (2024) Self-compacting concrete blended with fly ash and ground granulated blast furnace slag. In: Advance Upcycling of By-Products in Binder and Binder-Based Materials. Woodhead Publishing Series.

Prasath, Palaniappan and Shanmugam, Balaji and Awoyera, P. O. (2023) Behaviour of Stainless-Steel Fibre-Reinforced Exterior Beam�Column Joints under Reverse Cyclic Loading. Advances in Civil Engineering.

Mansouri, Iman and Mortazavi, Seyed Javad and Manfredi, Maeve and Awoyera, P. O. (2023) Development of New Material Models for Thermal Behavior of Cold-Formed G-450 and G-550 Steels in OpenSees Software. Journal of Architectural Engineering, 29 (2).

Mydin, Md Azree Othuman and Khalid, Mohamad Sukeri and Omar, Roshartini and Najm, Hadee Mohammed and Qaidi, Shaker Mahmood Abdal and Awoyera, P. O. (2023) Durability Properties of Lightweight Foamed Concrete Reinforced With ‘Musa Acuminate’ Fibre. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 145-158. ISSN 145-158

Aliu, Adekunle O. and Olalusi, Oladimeji B. and Awoyera, P. O. and Kiliswa, Moses (2023) Evaluation of pozzolanic reactivity of maize straw ash as a binder supplement in concrete. Case Studies in Construction Materials, 18.

Mydin, Md Azree Othuman and Khalid, Mohamad Sukeri and Omar, Roshartini and Najm, Hadee Mohammed and Qaidi, Shaker Mahmood Abdal and Awoyera, P. O. (2023) Influence of Crisscross Fiberglass Strip on Axial Compressive Strength of Lightweight Foamed Concrete. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 135-144.

Farzampour, Alireza and Mortazavi, Seyed Javad and Mansouri, Iman and Awoyera, P. O. and Hu, Jong Wan (2023) Multi-Story Buildings Equipped with Innovative Structural Seismic Shear Fuse Systems. Seismic Evaluation, Damage, and Mitigation in Structures. pp. 279-305.

Awoyera, P. O. and Enemchukwu, Nonso G. and Karri, R. R. (2023) Performance validation of low-cost building insulation materials via the thermal characteristics and costs of insulation materials. In: AIP Conference.

Awoyera, P. O. and Najm, Hadee Mohammed and Adefarati, Olusegun David and Eldirderi, Moutaz Mustafa A. and Khedher, Khaled Mohamed and Dughaishi, Husam Al and Lawati, Jawad Al and Milad, Abdalrhman (2023) Postfire Residual Strength and Morphology of Concrete Incorporating Natural Rubber Latex Exposed to Elevated Temperatures. Advances in Civil Engineering.

Awoyera, P. O. and Althoey, Fadi and Ajinomisan, Hephzibah and Mydin, Md Azree Othuman and Bheel, Naraindas and Sabri, Mohanad Muayad Sabri and Hadidi, Haitham M. and Jayanthi, V. and Ahmad, Mahmood (2023) Potential of natural rubber latex in cement mortar for thermal insulating material in buildings. Frontiers in Materials. pp. 1-11.

Sridhar, Jayaprakash and Balaji, Shanmugam and Jegatheeswaran, Dhanapal and Awoyera, P. O. (2023) Prediction of the Mechanical Properties of Fibre-Reinforced Quarry Dust Concrete Using Response Surface and Artificial Neural Network Techniques. Advances in Civil Engineering, 7.

Mydin, Md Azree Othuman and Nawi, Mohd Nasrun Mohd and Omar, Roshartini and Najm, Hadee Mohammed and Awoyera, P. O. (2023) Studies on durability properties of natural fibre-reinforced green lightweight foamed concrete employing industrial hemp fibres. Journal of Advanced Research in Applied Mechanics, 10 (1). pp. 36-52.

Ede, A. N. and Akin-Adeniyi, Ayomide John and Effiong, John Uduak and Awoyera, P. O. and Oyebisi, S.O and Mark, O.G and Ezenkwa, C. S. (2023) Sustainable constructions and cases of high-rise buildings collapse in Nigeria. In: Building Smart, Resilient and Sustainable Infrastructure in Developing Countries – Musonda & Mwanaumo (eds). Taylor and Francis Group. ISBN 978-1-032-35107-0

Mydin, Md Azree Othuman and Majeed, Samadar Salim and Omar, Roshartini and Awoyera, P. O. and Najm, Hadee Mohammed (2023) Sustainable lightweight foamed concrete using hemp fibre for mechanical properties improvement. Journal of Advanced Research in Applied Mechanics, 101 (1). pp. 19-35. ISSN 2829-7895

Bheel, Naraindas and Ali, Montasir Osman Ahmed Ali and Shafiq, Nasir and Almujibah, Hamad R. and Awoyera, P. O. and Benjeddou, Omrane and Shittu, Ahmed and Olalusi, Oladimeji B. (2023) Utilization of millet husk ash as a supplementary cementitious material in eco-friendly concrete: RSM modelling and optimization. Structures, 49.

Olalusi, Oladimeji B. and Durgapershad, Avishkar and Awoyera, P. O. and Kolawole, John Temitope (2022) Modelling the edge breakout shear capacity of single anchors using gene expression programming. Neural Computing and Applications.

Awoyera, P. O. and Kirgiz, Mehmet S. (2022) 10 - Mineralogy and interfacial transition zone features of recycled aggregate concrete. In: The Structural Integrity of Recycled Aggregate Concrete Produced with Fillers and Pozzolans. Woodhead Publishing, pp. 469-477.

Awoyera, P. O. and Bheel, Naraindas and Adesina, Adeyemi and Olalusi, Oladimeji B. (2022) Alkali-activated materials: advances on accelerated and long-term durability assessment and methodologies—a short review. Innovative Infrastructure Solutions volume, 7 (291).

Bheel, Naraindas and Kennedy, Charles and Awoyera, P. O. and Sohu, Samiullah and Abbasi, Suhail Ahmed (2022) Comparative Study on Mechanical Properties of Concrete Blended with Costus englerianus Bagasse Ash and Bagasse Fibre as Partial Replacement for Lime and Cement. Advances in Civil Engineering.

Mortazavi, Seyed Javad and Mansouri, Iman and Awoyera, P. O. and Hu, Jong Wan (2022) Comparison of thermal performance of steel moment and eccentrically braced frames. Journal of Building Engineering, 49.

Awoyera, P. O. and Odutuga, Oluwaseun L. and Effiong, John Uduak and Sarmiento, Astelio De Jesus Silvera and Mortazavi, Seyed Javad and Hu, Jong Wan (2022) Development of Fibre-Reinforced Cementitious Mortar with Mineral Wool and Coconut Fibre. MATERIALS. ISSN 1392–1320

Awoyera, P. O. and Kirgiz, Mehmet S. and Adesina, Adeyemi (2022) Engineered uses of nanomaterials for sustainable cementitious composites. In: Sustainable Nanotechnology for Environmental Remediation. Elsevier Inc.

Pillay, Deveshan L. and Olalusi, Oladimeji B. and Kiliswa, Moses W. and Awoyera, P. O. and Kolawole, John Temitope and Babafemi, A. J (2022) Engineering performance of metakaolin based concrete. Cleaner Engineering and Technology, 6.

Awoyera, P. O. and Effiong, John Uduak and Olalusi, Oladimeji B. and Arunachalam, Krishna Prakash and Azevedo, Afonso R. G. de and Martinelli, Flavia R. B. and Monteiro, Sergio Neves (2022) Experimental Findings and Validation on Torsional Behaviour of Fibre-Reinforced Concrete Beams: A Review. Polymers, 14. pp. 1-30.

Awoyera, P. O. and Effiong, John Uduak and Olalusi, Oladimeji Benedict and Arunachalam, Krishna Prakash and Martinelli, Flavia R. B. and Monteiro, Sergio Neves (2022) Experimental findings and validation on torsional behaviour of fibre-reinforced concrete beams: a review. polymers.

Al-Attar, Alyaa A. and Hamada, Hussein M. and Tayeh, Bassam A. and Awoyera, P. O. (2022) Exploring engineering properties of waste tire rubber for construction applications - a review of recent advances. Materials Today.

Kumar, Selvaraj and Murthi, P and Awoyera, P. O. and Gobinath, Ravindran and kumar, Sathis (2022) Impact Resistance and Strength Development of Fly Ash Based Self-compacting Concrete. Silicon, 14. pp. 481-492.

Mansouri, Iman and Tezcan, Jale and Awoyera, P. O. (2022) A Novel Formulation for Estimating Compressive Strength of High Performance Concrete Using Gene Expression Programming. In: Leveraging Artificial Intelligence in Enginering <anagement and safty of Infrastructure. CRC Press.

Mark, Oluwaseun and Ede, A. N. and Arum, Chinwuba and Awoyera, P. O. (2022) STRENGTH AND DURABILITY ASSESSMENTS OF INDUCTION FURNACE SLAG - QUARRY DUST - BASED HIGH PERFORMANCE SELF - COMPACTING CONCRETE. Civil and Environmental Engineering, 18 (1). pp. 1-16.

Awoyera, P. O. and Akinrinade, Ayomide D. and Galdino, Andr ́e Gustavo de Sousa and Althoey, Fadi and Kirgiz, Mehmet S. and Tayeh, Bassam A. (2022) Thermal insulation and mechanical characteristics of cement mortar reinforced with mineral wool and rice straw fibers. Journal of Building Engineering, 53.

Awoyera, P. O. and Alfa, J. and Odetoyan, Abimbola Oyebola and Akinwumi, I. I. (2021) Building Collapse in Nigeria during recent years – Causes, effects and way forward. In: ICSID 2020, 2021, Online.

Awoyera, P. O. and Alfa, J. and Odetoyan, A. and Akinwumi, I. I. (2021) Building Collapse in Nigeria during recent years – Causes, effects and way forward. In: ICSID 2020, 2021, Online.

Kumar, Sanjay and Murthi, P and Awoyera, P. O. and Gobinath, R and kumar, Sathis (2021) Impact Resistance and Strength Development of Fly Ash Based Selfcompacting Concrete. SpringerLink. ISSN 1570-646X

Mansouri, Iman and Ostovari, Mobin and Awoyera, P. O. and Wan Hu, Jong (2021) Predictive modeling of the compressive strength of bacteria-incorporated geopolymer concrete using a gene expression programming approach. Computers and Concrete, 27 (4). pp. 319-332.

Bheel, Naraindas and Awoyera, P. O. and Tafsirojjaman, T. and Sor, Nadhim Hamah (2021) Synergic effect of metakaolin and groundnut shell ash on the behavior of fly ash-based self-compacting geopolymer concrete. Construction and Building Materials.

Awoyera, P. O. and Mansouri, Iman and Abraham, Ajith and Viloria, A. (2021) A new formulation for strength characteristics of steel slag aggregate concrete using an artificial intelligence-based approach. Computers and Concrete, 27 (4). pp. 333-341.

Babalola, O. E. and Awoyera, P. O. and Le, D. -H. and Romero, L.M. Bendezú (2021) A review of residual strength properties of normal and high strength concrete exposed to elevated temperatures: Impact of materials modification on behaviour of concrete composite. Construction and Building Materials.

Awoyera, P. O. and Adesina, Adeyemi and Sivakrishna, A. and Gobinath, R and Kumar, K. Rajesh and Srinivas, A. (2020) Alkali activated binders: Challenges and opportunities. Materials Today: Proceedings, 27. pp. 40-47.

Awoyera, P. O. and Gobinath, R and Nwankwo, C and Murthi, P and Sivakrishna, A. (2020) Computing Redistribution Moments of Concrete Members in the Plastic Stage Using Linear Analysis: Short Review. In: International Conference on Emerging Trends in Engineering (ICETE). Learning and Analytics in Intelligent Systems, 2 . Springer International Publishing, pp. 66-72. ISBN 978-3-030-24313-5

Awoyera, P. O. and Kirgiz, Mehmet S. and Viloria, A. and Ovallos-Gazabon, D. (2020) Estimating strength properties of geopolymer self-compacting concrete using machine learning techniques. Journal of Material Research and Technology. pp. 9016-9028.

Awoyera, P. O. and Britto, Babamide F. (2020) Foamed concrete incorporating mineral admixtures and pulverized ceramics: Effect of phase change and mineralogy on strength characteristics. Construction and Building Materials.

Bhee, Naraindas and Abbasi, Suhail Ahmed and Awoyera, P. O. and Olalusi, Oladimeji B. and Sohu, Samiullah and Rondon, Carlos and Echeverria, Ana Maria (2020) Fresh and Hardened Properties of Concrete Incorporating Binary Blend of Metakaolin and Ground Granulated Blast Furnace Slag as Supplementary Cementitious Material. Advances in Civil Engineering.

Sivakrishna, A. and Adesina, Adeyemi and Awoyera, P. O. and Kumar, K. Rajesh (2020) Green concrete: A review of recent developments. Materials Today: Proceedings, 27. pp. 54-58.

Mortazavi, Seyed Javad and Mansouri, Iman and Awoyera, P. O. and Naser, M. Z. (2020) Implementation of new elements and material models in OpenSees software to account for post-earthquacke fire damage. Structures, 27. pp. 1777-1785.

Babalola, O. E. and Awoyera, P. O. and Tran, M. T. and Le, D. -H. and Olalusi, Oladimeji B. and Viloria, A. and Ovallos-Gazabon, D. (2020) Mechanical and durability properties of recycled aggregate concrete with ternary binder system and optimized mix proportion. Journal of Materials Research and Technology. pp. 6521-6532.

Awoyera, P. O. and Gobinath, R and Haripriya, S and Kulandaisami, P (2020) New Light Weight Mortar for Structural Application: Assessment of Porosity, Strength and Morphology Properties. In: International Conference on Emerging Trends in Engineering (ICETE). Learning and Analytics in Intelligent Systems, 2 . Springer International Publishing, pp. 59-65. ISBN 978-3-030-24313-5

Palanisamy, Murthi and Kolandasamy, Poongodi and Awoyera, P. O. and Gobinath, Ravindran and Muthusamy, Sivaraja and Krishnasamy, Thirumalai Raja and Viloria, Amelec (2020) Permeability properties of lightweight self-consolidating concrete made with coconut shell aggregate. j m a t e r r e s t e c h n o l, 3 (9). pp. 3547-3557.

Awoyera, P. O. and Adesina, Adeyemi (2020) Plastic wastes to construction products: Status, limitations and future perspective. Case Studies in Construction Materials, 12.

Awoyera, P. O. and Adesina, Adeyemi and Olalusi, Oladimeji B. and Viloria, A. (2020) Reinforced concrete deterioration caused by contaminated construction water: An overview. Engineering Failure Analysis.

Pillay, Deveshan L. and Olalusi, Oladimeji B. and Awoyera, P. O. and Rondon, Carlos and Echeverria, Ana Maria and Kolawole, John Temitope (2020) A Review of the Engineering Properties of Metakaolin Based Concrete: Towards Combatting Chloride Attack in Coastal/ Marine Structures. Advances in Civil Engineering.

Olalusi, Oladimeji B. and Awoyera, P. O. (2020) Shear capacity prediction of slender reinforced concrete structures with steel fibers using machine learning. Engineering Structures.

Banu, T. Udaya and Rajamane, N.P. and Awoyera, P. O. and Gobinath, R (2020) Strength characterisation of self cured concrete using AI tools. Materials Today: Proceedings.

Bheel, Naraindas and Awoyera, P. O. and Aluko, Oluwatobi and Mahro, Santosh and Viloria, Amelec and Sierra, Carlos Alberto Severiche (2020) Sustainable composite development: Novel use of human hair as fiber in concrete. Case Studies in Construction Materials.

Awoyera, P. O. and Adesina, Adeyemi (2019) Durability Properties of Alkali Activated Slag Composites: Short Overview. Silicon. ISSN 1876-990X (In Press)

Ede, A. N. and Oshogbunu, O. and Olofinnade, O. M. and Jolayemi, Joshua and Oyebisi, S.O and Mark, Grace and Awoyera, P. O. (2019) Effects of bamboo fibers and limestone powder on fresh properties of self-compacting concrete. In: The Tenth International Structural Engineering and Construction Conference, May 20-25, 2019, Chicago, Illinois, United States.

Awoyera, P. O. and Karthik, S and Rao, PRM and Gobinath, R (2019) Experimental and numerical analysis of large-scale bamboo-reinforced concrete beams containing crushed sand. Innovative Infrastructure Solutions, 4 (41).

Sivakrishna, A. and Awoyera, P. O. and Oshin , S. and Suji, D. and Gobinath, R. (2019) Fabrication of precast concrete slab panels incorporating foundry sand and blast furnace slag as a potential wall insulator. Journal of Engineering Science and Technology, XX (Y). ISSN 1823-4690 (In Press)

Akinwumi, I. I. and Ajayi, O. O. and Joshua, Opeyemi and Sani, R. O. and Olofinnade, O. M. and Awoyera, P. O. and Ogundairo, T. O. and OGUNWOLE, ADEWALE DANIEL and Afolayan, O. D. (2019) Housing crisis: Waste glass-stabilized clay for use as fired clay bricks. IOP Conf. Series: Materials Science and Engineering, 640.

Akinwumi, I. I. and Ajayi, O.O and Joshua, O and Sani, R. O. and Olofinnade, O. M. and Awoyera, P. O. and Ogundairo, T. O. and Ogunwole, D.A and Afolayan, O.D (2019) Housing crisis: Waste glass-stabilized clay for use as fired clay bricks. IOP Conf. Series: Materials Science and Engineering (640).

Awoyera, P. O. and Akinwumi, I. I. and Karthika, V. and Gobinath, R and Gunasekaran, R. and Lokesh, N. and Manikandan, M. and Narmatha, T. (2019) Lightweight Self-Compacting Concrete Incorporating Industrial Rejects and Mineral Admixtures: Strength and Durability Assessment. Silicon.

Awoyera, P. O. and Akinmusuru, J. O. and Ede, A. N. and Jolayemi, Joshua (2019) Novel concrete mixture using silica rich aggregates: workability, strength and microstructural properties. In: The Tenth International Structural Engineering and Construction Conference, May 20-25, 2019, Chicago, Illinois, United States.

Sangeetha, G. and kumar, B. Arun and Srinivas, A. and Krishna, Siva and Gobinath, R and Awoyera, P. O. (2019) Optimization of Drilling Rig Hydraulics in Drilling Operations Using Soft Computing Techniques. SpringerLink. pp. 849-862. ISSN 1570-646X

Adesina, Adeyemi and Awoyera, P. O. (2019) Overview of trends in the application of waste materials in self-compacting concrete production. SN Applied Sciences, 1.

Olofinnade, O. M. and Busari, A. A. and Akinwumi, I. I. and Awoyera, P. O. and Ekanem, J (2019) Perception of professionals on causes of structural cracks in concrete buildings. In: 1st International Conference on Sustainable Infrastructural Development, 2019.

Awoyera, P. O. and Adesina, Adeyemi and Gobinath, R (2019) Role of recycling fine materials as filler for improving performance of concrete - a review. Australian Journal of Civil Engineering. (In Press)

Awoyera, P. O. and Adesina, Adeyemi and Gobinath, R (2019) Role of recycling fine materials as filler for improving performance of concrete - a review. Australian Journal of Civil Engineering.

Rajesh , K and Karthik, S and Ramamohan, R and Awoyera, P. O. and Gobinath, R and Shivakrishna, A and Murthi, P (2019) Shear Resistance of portal Frame Reinforced with Bamboo and Steel Rebar: Experimental and Numerical Evaluation. International Journal of Recent Technology and Engineering (IJRTE) , 8 (1). pp. 445-452. ISSN 2277-3878

Anandaraj, S and Rooby, J and Awoyera, P. O. and Gobinath, R (2019) Structural distress in glass fibre-reinforced concrete under loading and exposure to aggressive environments. Construction and Building Materials. (In Press)

Banu, S.T. and Chitra, G. and Awoyera, P. O. and Gobinath, R (2019) Structural retrofitting of corroded fly ash based concrete beams with fibres to improve bending characteristics. Australian Journal of Structural Engineering. (In Press)

Awoyera, P. O. and Adesina, Adeyemi (2019) A critical review on application of alkali activated slag as a sustainable composite binder. Case Studies in Construction Materials.

Aderonmu, P. A and Adewale , B. A. and Babalola, Daniel Olatunde and Peter, Nkolika Joy and Awoyera, P. O. (2018) ASSESSMENT OF REVOLUTIONARY PEDAGOGIC PRACTICES IN THE ARCHITECTURAL DESIGN STUDIOS OF SELECTED NIGERIAN UNIVERSITIES. International Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 1493-1518. ISSN 0976-6316

Adewale , B. A. and Aderonmu, P. A and Fulani, O. and Babalola, Daniel Olatunde and Awoyera, P. O. (2018) SOCIETAL ATTITUDE TOWARDS VOCATIONAL EDUCATION IN OGUN STATE, NIGERIA. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 1029-1040. ISSN 0976-6359

Karthik, S and Rama Mohan Rao, P. and Awoyera, P. O. and Gobinath, R and Karri, R. R. (2018) Alkalinity and strength properties of concrete containing macro silica and ground granulated blast furnace slag. In: The 7th Brunei International Conference on Engineering and Technology 2018 (BICET 2018), 12-14 November 2018, Universiti Teknologi Brunei Brunei Darussalam. (In Press)

Karthik, S and Ram Mohan Rao, P and Awoyera, P. O. and Akinwumi, I. I. and Karthikeyan, T. and Revathi, A. and Mathivanan, J. and Manikandan, V. and Saravanan, S. (2018) Beneficiated pozzolans as cement replacement in bamboo-reinforced concrete: the intrinsic characteristics. Innovative Infrastructure Solutions, 3 (1).

Awoyera, P. O. and Anele, W. and Ojuh, C. and Ekedum, K. and Aderoba, A. and Mebitaghan, C. (2018) Curing, thermal resistance and bending behavior of laterised concrete containing ceramic wastes. Cogent Engineering .

Ugwu, E. I. and Ekeleme, A.C. and Awoyera, P. O. and Ozioko, H.O. and Osinachi, U. (2018) Effect of municipal solid waste contamination on some geotechnical properties of soil. Journal of Materials and Environmental Science, 9 (2). pp. 585-590. ISSN 2028-2508

Awoyera, P. O. and Okoro, U. C. (2018) Filler-Ability of Highly Active Metakaolin for Improving Morphology and Strength Characteristics of Recycled Aggregate Concrete. Silicon. pp. 1-8. ISSN 1876-990X (In Press)

Sateshkumar, S. K. and Awoyera, P. O. and Kandasamy, T. and Nagaraj, S. and Murugesan, P. and Ponnusamy, B. (2018) Impact resistance of high strength chopped basalt fibre-reinforced concrete. Revista de la Construcción, 17 (2). pp. 240-248.

Awoyera, P. O. and Covenant University, Theses (2018) Mechanical and microstructural characterization of ceramic-laterized concrete composite. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Covenant University, Ota, Nigeria.

Awoyera, P. O. and Akinmusuru, J. O. and Dawson, A. R. and Ndambuki, J.M. and Thom, N. H. (2018) Microstructural characteristics, porosity and strength development in ceramic-laterized concrete. Cement and Concrete Composites, 86. pp. 224-237.

Ede, A. N. and Olofinnade, O. M. and Awoyera, P. O. (2018) STRUCTURAL FORM WORKS AND SAFETY CHALLENGES: ROLE OF BAMBOO SCAFFOLD ON COLLAPSE OF REINFORCED CONCRETE BUILDINGS IN NIGERIA. International Journal of Civil Engineering and Technology, 9 (9). pp. 1675-1681. ISSN 0976-6308 and ISSN Online: 0976-6316

Karthika, V. and Awoyera, P. O. and Akinwumi, I. I. and Gobinath, R. and Gunasekaran, R. and Lokesh, N. (2018) STRUCTURAL PROPERTIES OF LIGHTWEIGHT SELF-COMPACTING CONCRETE MADE WITH PUMICE STONE AND MINERAL ADMIXTURES. Revista Română de Materiale / Romanian Journal of Materials , 48 (2). pp. 208-213.

Busari, A. A. and Akinwumi, I. I. and Awoyera, P. O. and Olofinnade, O. M. and Tenebe, I.T. and Nwanchukwu, J.C. (2018) Stabilization Effect of Aluminum Dross on Tropical Lateritic Soil. International Journal of Engineering Research in Africa, 39. pp. 86-96.

Thahira Banu, S. and Chitra, G. and Gobinath, R. and Awoyera, P. O. and Ashokkumar, E. (2018) Sustainable structural retrofitting of corroded concrete using basalt fibre composite. Ecology, Environment and Conservation, 24 (3). pp. 1384-1388.

Murthi, P. and Awoyera, P. O. and Selvaraj, P. and Dharsana, D. and Gobinath, R. (2018) Using silica mineral waste as aggregate in a green high strength concrete: workability, strength, failure mode, and morphology assessment. Australian Journal of Civil Engineering.

Adesina, Adeyemi and Awoyera, P. O. (2018) Utilization of biomass energy in cement production: a pathway towards sustainable infrastructure. In: World Renewable Energy Congress & Exhibition -18, 30 July to 3 August 2018, Kingston University, London, United Kingdom. (In Press)

Muneeswaran, G. and Manoharan, P. and Awoyera, P. O. and Adesina, Adeyemi (2018) A statistical approach to assess the schedule delays and risks in Indian construction industry. International Journal of Construction Management.

Awoyera, P. O. and Ede, A. N. (2017) Bamboo Versus Tubular Steel Scaffolding in Construction: Pros and Cons. In: Reference Module in Materials Science and Materials Engineering. Elsevier.

Awoyera, P. O. and Akinmusuru, J. O. and Ndambuki, J.M. and Lucas, S.S. (2017) Benefits of using ceramic tile waste for making sustainable concrete. The Journal of Solid Waste Technology and Management, 43 (3). pp. 233-241.

Awoyera, P. O. and Akinmusuru, J. O. and Moncea, Andrea (2017) Hydration mechanism and strength properties of recycled aggregate concrete made using ceramic blended cement. Cogent Engineering, 4 (1).

Sathanandam, T. and Awoyera, P. O. and Vijayan, V. and Sathishkumar, K. (2017) Low carbon building: Experimental insight on the use of fly ash and glass fibre for making geopolymer concrete. Sustainable Environment Research, 27 (3). pp. 146-153. (Submitted)

Awoyera, P. O. (2017) Predictive models for determination of compressive and split-tensile strengths of steel slag aggregate concrete. Materials Research Innovations. pp. 1-7.

Aderonmu, P. A and Awoyera, P. O. and Sholanke, Anthony Babatunde and Erebor, Emokpae (2017) Professional methods of assessments in architectural design projects: A focus on the relevant parametric measures in selected Nigerian universities. Cogent Social Studies, 3. pp. 1-20.

Karthik, S and Ram Mohan Rao, P and Awoyera, P. O. (2017) Strength properties of bamboo and steel reinforced concrete containing manufactured sand and mineral admixtures. Journal of King Saud University – Engineering Sciences. (In Press)

Awoyera, P. O. and Adesina, Adeyemi (2017) Structural Integrity Assessment of Bamboo for Construction Purposes. In: Reference Module in Materials Science and Materials Engineering. Elsevier.

Awoyera, P. O. and Dawson, A. R. and Thom, N. H. and Akinmusuru, J. O. (2017) Suitability of mortars produced using laterite and ceramic wastes: Mechanical and microscale analysis. Construction and Building Materials, 148. pp. 195-203. ISSN 0950-0618

Awoyera, P. O. and Ugwu, E. I. (2017) Sustainability and Recycling of Bamboo for Engineering Applications. In: Reference Module in Materials Science and Materials Engineering. Elsevier.

Awoyera, P. O. and Ngene, Ben U. and Adeyemi, Gideon Adewale and Aderonmu, P. A (2016) Mitigating Ground Shaking Construction Activities in Coastal Cities of Nigeria: An Earthquake Preventive Measure. In: Earthquakes: Monitoring Technology, Disaster Management and Impact Assessment. Nova Science Publishers, Inc.. ISBN 978-1536103427

Awoyera, P. O. and Ndambuki, J.M. and Akinmusuru, J. O. and Omole, D. O. (2016) Characterization of ceramic waste aggregate concrete. HBRC Journal. ISSN 1687-4048 (In Press)

Awoyera, P. O. and Akinmusuru, J. O. and Ndambuki, J.M. (2016) Green concrete production with ceramic wastes and laterite. Construction and Building Materials, 117 (1). pp. 29-36. ISSN 0950-0618

Afolayan, Joseph O. and Babalola, O. E. and Awoyera, P. O. and Adekeye, Wasiu and Ishola, Felix (2016) Numerical Modelling of Retrofitted Reinforced Concrete Building Frames. Research Journal of Applied Sciences, Engineering and Technology, 12 (2). pp. 206-213. ISSN 2040-7467

Aderonmu, P. A and Awoyera, P. O. and Amole, S. A. and Olofinnade, O. M. and Adekeye, A. W. (2016) PARAMETRIC MEASURES FOR DESIGN WORKSPACE ADEQUACY OF SELECTED INSTITUTIONS IN NIGERIA. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 2105-2119. ISSN 1819-6608

Awoyera, P. O. and Olofinnade, O. M. and Busari, A. A. and Akinwumi, I. I. and Oyefesobi, M. and Ikemefuna, M. (2016) PERFORMANCE OF STEEL SLAG AGGREGATE CONCRETE WITH VARIED WATER- CEMENT RATIO. Jurnal Teknologi, 78 (10). pp. 125-131. ISSN 2180–3722

Adewale , B. A. and Aderonmu, P. A and Awoyera, P. O. and Omoyeni, Fulani and Jegede, Foluke and Erebor, Emokpae (2016) Pedagogic Tenets of Specification Writing in Architectural Education, Construction and Practice. Sains Humanika, 8 (4). pp. 27-35.

Akinwumi, I. I. and Awoyera, P. O. and Olofinnade, O. M. and Busari, A. A. and Okotie, M (2016) Rice husk as a concrete constituent: Workability, water absorption and strength of the concrete. Asian Journal of Civil Engineering, 17 (7). pp. 887-898. ISSN 1563-0854

Awoyera, P. O. and Ogundeji, Jadesola and Aderonmu, P. A (2016) Simulated Combined Earthquake and Dead Load Lateral Resistance Building Systems using Nigeria Seismic Data. Journal of Materials and Environmental Science, 7 (3). pp. 781-789. ISSN 885-894

Babalola, O. E. and Awoyera, P. O. (2016) Suitability of Cordia millenii Ash Blended Cement in Concrete Production. International Journal of Engineering Research in Africa, 22. pp. 59-67. ISSN 1663-4144

Ede, A. N. and Olofinnade, O. M. and Awoyera, P. O. (2015) Innovative Use of Momordica Angustisepala Fibers for improved strength of Recycled Concrete. In: 2nd Covenant University Conference on African Development Issues (CU-ICADI), 11th - 13th May, 2015, Africa Leadership Development Center, Covenant University, Ota, Nigeria..

Akinwumi, I. I. and Awoyera, P. O. and Bello, O. O. (2015) Indigenous earth building construction technology in Ota, Nigeria. Indian Journal of Traditional Knowledge, 14 (2). pp. 206-212. ISSN 0975-1068

Awoyera, P. O. (2015) Challenges of Car Pack Design in Nigeria. Challenges of Car Pack Design in Nigeria, 4 (10). pp. 38-42. ISSN 278-3075

Awoyera, P. O. and Olofinnade, O. M. (2015) Evaluation of Sustainable Concrete Production and Construction Cost Implication in Nigeria. International Journal Of Science and Technology (STECH), 4 (4). pp. 119-128. ISSN 2227-5452

Ede, A. N. and Adepoju, Peace Feyiyemi and Awoyera, P. O. (2015) Challenges of Car Pack Design in Nigeria. International Journal of Innovative Technology and Exploring Engineering, 4 (10). pp. 38-42. ISSN 2278-3075

Awoyera, P. O. and Adekeye, A. W. and Babalola, O. E. (2015) Influence of Electric Arc Furnace (EAF) Slag Aggregate Sizes on the Workability and Durability of Concrete. International Journal of Engineering and Technology (IJET), 7 (3). pp. 1049-1056. ISSN 0975-4024

Awoyera, P. O. and ijalana, G. K. and Babalola, O. E. (2015) Influence of Steel and Bamboo Fibres on Mechanical Properties of High Strength Concrete. Journal of Materials and Environmental Science, 6 (12). pp. 3634-3642. ISSN 2028-2508

Awoyera, P. O. (2015) Nonlinear Finite Element Analysis of Fibre-Reinforced Concrete Beam under Static Loading. Journal of Engineering Science and Technology. ISSN 1823-4690 (In Press)

Adekeye, A. W. and Awoyera, P. O. (2015) Strength Characteristics of Concrete Beams Reinforced with Steel Bars of Equivalent Area but Different Diameters. Research Journal of Applied Sciences, Engineering and Technology, 11 (7). pp. 765-769. ISSN 2040-7467

Akinwumi, I. I. and Olatunbosun, O. M. and Olofinnade, O. M. and Awoyera, P. O. (2014) Structural Evaluation of Lightweight Concrete Produced Using Waste Newspaper and Office Paper. Civil and Environmental Research , 6 (7). pp. 160-167. ISSN ISSN 2224-5790 (Paper) ISSN 2225-0514 (Online)

Awoyera, P. O. and Akinwumi, I. I. and Ede, A. N. and Olofinnade, O. M. (2014) Forensic Investigation of Fire-affected Reinforced Concrete Buildings. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 11 (4). pp. 17-23. ISSN 2278-1684

Awoyera, P. O. and Arum, Chinwuba and Akinwumi, I. I. (2014) Significance of Concrete Cover to Reinforcement in Structural Element at Varying Temperatures. International Journal of Scientific & Engineering Research, 5 (6). pp. 1120-1123. ISSN 2229-5518

Awoyera, P. O. and Akinwumi, I. I. (2014) Compressive Strength Development for Cement, Lime and Termite-hill Stabilised Lateritic Bricks. The International Journal Of Engineering And Science, 3 (2). pp. 37-43. ISSN 2319 – 1813

Awoyera, P. O. (2014) Forensic Investigation of Fire-affected Concrete Buildings. Lap Lambert Academic Publishing, Germany. ISBN 978-3-659-57278-4

Ede, A. N. and Alegiuno, V. and Awoyera, P. O. (2014) Use of Advanced Plastic Materials in Nigeria: Performance Assessment of Expanded Polystyrene Building Technology System. Use of Advanced Plastic Materials in Nigeria: Performance Assessment of Expanded Polystyrene Building Technology System, 3 (4). pp. 301-308. ISSN 2320-0847

Arum, Chinwuba and Awoyera, P. O. (2011) Evaluation of Post-fire Residual Strengths of In-situ Concrete and Steel Reinforcement Samples Using Non-destructive and Destructive Test Methods. Journal of Civil Engineering, 7 (1). pp. 46-58.

Ede, A. N. and Oshogbunu, O and Olofinnade, O. M. and Jolayemi, Joshua and Oyebisi, S.O and Mark, Grace and Awoyera, P. O. Effects of Bamboo Fibers and Limestone powder on fresh properties of Self-Compacting Concrete. In: Interdependence between Structural Engineering and Construction Management.

Kim, Young-Chan and Mortazavi, Seyed Javad and Farzampour, Alireza and Hu, Jong Wan and Mansouri, Iman and Awoyera, P. O. Optimization of the Curved Metal Damper to Improve Structural Energy Dissipation Capacity. Buildings, 12 (1).

This list was generated on Thu Nov 21 14:58:56 2024 WAT.