Items where Author is "Babalola, P.O."

Group by: Item Type | No Grouping

Jump to: Article | Book Section | Conference or Workshop Item

Number of items: 101.

Article

Joseph, Williams Ajuwaeze and Loto, R. T. and Babalola, P.O. and Okeniyi, Joshua Olusegun (2023) Analysis of the effect of Zea Mays husk particulate reinforcement on 1170 Aluminium corrosion in a simulated industrial environment. Key Engineering Materials. pp. 97-107.

Edun, B.M and Ajayi, O. O. and Babalola, P.O. and Salawu, Enesi Y. (2023) Effect of Case Hardening on the Wear and hardness properties of Medium Carbon Steel for Bone Crushing Application. HELIYON.

Ogunrinola, Iyanuoluwa and Akinyemi, M. L. and Aizebeokhai, A. P. and Sule, Rasidi and Omeje, Maxwell and Boyo, Henry and Sanni, Samuel Eshorame and Babalola, P.O. (2023) Silica and kaolin reinforced aluminum matrix composite for heat storage. Reviews on Advanced Materials Science, 62.

Ogunrinola, Iyanuoluwa and Akinyemi, M. L. and Aizebeokhai, A. P. and Sule, Rasidi and Sanni, Samuel Eshorame and Boyo, Henry and Omeje, Maxwell and Babalola, P.O. (2023) Silica and kaolin reinforced aluminum matrix composite for heat storage. De Gruyter, 62. pp. 1-13.

Kilanko, O. O and Oyedepo, Sunday Olayinka and Dirisu, J. O. and Leramo, R.O. and Babalola, P.O. and Aworinde, Abraham K. and Udo, Mfon .O and Okonkwo, Alexander M and Akomolafe, Marvelous I (2023) Typical meteorological year data analysis for optimal usage of energy systems at six selected locations in Nigeria. International Journal of Low-Carbon Technologies, 18. pp. 637-658.

Leramo, R.O. and Adekoya, Lawson O. and Kilanko, O. O and Oyedepo, Sunday Olayinka and Eluwa, Stephen E. and Babalola, P.O. and Adeosun, Samson O. and Leramo, Nicholas T. and Aiyedun, Peter O. and Ohunakin, O.S. and Ajayi, O. O. and Fayomi, O. S. I (2022) A comparative analysis of the chemical composition and compliance level to established standards of concrete reinforcement steel rods rolled in Nigeria. Heliyon, 8 (6).

Oyedepo, Sunday Olayinka and Ezeuduji, D. and Araoyinbo, Alaba and Kilanko, O. O and Efemwenkiekiea, U. K. and Dirisu, J. O. and Aworinde, Abraham K. and Babalola, P.O. and Leramo, R.O. and Ahmed, Mohamed H. and Saleh, Bahaa (2022) Numerical modeling of heat transfer performance and optimization of car radiator using (H2O/Al2O3) nanofluids as coolant. Numerical Heat Transfer, Part B: Fundamentals, 82 (5). pp. 185-198.

Edun, B.M and Ajayi, O. O. and Babalola, P.O. (2022) Failure Mode and Cost Effect Analysis of a Model Bone Crushing Hammer. Key Engineering Materials, 917. pp. 63-69.

Udo, Mfon .O and Afolalu, Sunday A. and Ikumapayi, O. M. and Babalola, P.O. and Obasa, Victoria and Akpalikpo, Oluseyum (2022) Effect of particle size and weight percentage variation on the mechanical properties of periwinkle shell reinforced polymer (epoxy resin) matrix composite. International Journal of Applied Science and Engineering, 19 (3). ISSN 1727-2394 (Print) ISSN: 1727-7841 (Online)

Loto, R. T. and Babalola, P.O. (2022) Evaluation of the influence of alumina nano-particle size and weight composition on the corrosion resistance of monolithic AA1070 aluminium. Materials Today: Proceedings, 65. pp. 2138-2143.

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Joseph, O. O and Akinlabi, Esther T. and Babalola, P.O. and Udoye, Nduka Ekene and Ajayi, O. O. and Aworinde, Abraham K. and Banjo, SolomonO. and Oluwasegun, K.M (2022) Thermal-emission assessment of building ceilings from agro-industrial wastes. Fuel Communications, 10.

Dirisu, J. O. and Joseph, O. O and Babalola, P.O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Oluwasegun, K.M and Nduka, Udoye and Ajayi, O. O. and Ajibero, Michael (2022) Utilization of Waste Materials for Eco-Friendly Building Ceilings: An Overview. Key Engineering Materials. pp. 285-295.

Loto, R. T. and Babalola, P.O. (2021) Evaluation of the Influence of Alumina Nano-Particle Size and Weight Composition on the Corrosion Resistance of Monolithc Aa1070 Aluminium. Materials Engineering eJournalf.

Oriyomi, Moses Oluwayimika and Babalola, P.O. (2020) Comparison of Mosquitoes Response to Different Diodes Wavelengths. International Journal of Science and Research (IJSR), 9 (7). pp. 218-223. ISSN 2319-7064

Ayoola, A. A. and Hymore, F. K. and Omonhinmin, Conrad A. and Babalola, P.O. and Bolujo, E. O. and Adeyemi, Gideon Adewale and Babalola, Rasheed and OLAFADEHAN, O. A. (2020) Data on artificial neural network and response surface methodology analysis of biodiesel production. Data in Brief, 31. ISSN 2352-3409

Kilanko, O. O and Ojolo, S.J and Leramo, R.O. and Ilori, T. A and Oyedepo, Sunday Olayinka and Babalola, P.O. and Fayomi, O. S. I and Onwordi, Patrick Nwanne and Ufot, Edidiong and Ekwere, Akaninyene (2020) Dataset on physical properties of raw and roasted cashew nuts. Data in Brief.

Oyedepo, Sunday Olayinka and Kilanko, O. O and Waheed, M. A. and Fayomi, O. S. I and Ohunakin, O.S. and Babalola, P.O. and Ongbali, Samson O. and Nwaokocha, Collins N. and Mabinuori, B. and Shopeju, O. O. (2020) Dataset on thermodynamics performance analysis and optimization of a reheat –regenerative steam turbine power plant with feed water heaters. Data in Brief. ISSN 2352-3409

Efemwenkiekie, K. U. and Babalola, P.O. and Dirisu, J. O. and Oyedepo, Sunday Olayinka (2020) IMPACT OF ELECTRIC VEHICLE IN 21ST CENTURY DEVELOPING COUNTRIES. International Journal of Mechanical and Production Engineering Research and Development, 10 (3). pp. 11797-11806. ISSN 2249–6890; ISSN(E): 2249–8001

Ayoola, A. A. and Hymore, F. K. and Omonhinmin, Conrad A. and Babalola, P.O. and Fayomi, O. S. I and Olawole, C. Olukunle and Olawepo, A.V and Babalola, A (2020) Response surface methodology and artificial neural network analysis of crude palm kernel oil biodiesel production. Chemical Data Collections, 28.

Oyedepo, Sunday Olayinka and Fakeye, B. A. and Mabinuori, B. and Babalola, P.O. and Leramo, R.O. and Kilanko, O. O and Dirisu, J. O. and Udo, Mfon .O and Efemwenkiekie, K. U. and Oyebanji, J.A. (2020) Thermodynamics analysis and performance optimization of a reheat – Regenerative steam turbine power plant with feed water heaters. Fuel.

Kilanko, O. O and Leramo, R.O. and Ilori, T. A and Oyedepo, Sunday Olayinka and Babalola, P.O. and Eluwa, Stephen E. and Onwordi, Patrick Nwanne and Ameh, N. I. and Onyenma, F. A. (2020) WITHDRAWN: Dataset on performance of solar dryer for scotch bonnet pepper drying. MethodsX. ISSN 2215-0161

Oyedepo, Sunday Olayinka and Uwoghiren, Theophilus and Babalola, P.O. and Nwanya , Stephen and Kilanko, O. O and Leramo, R.O. and Aworinde, Abraham K. and Adekeye, T. and Oyebanji, J.A. and Abidakun, O.A. (2019) Assessment of Decentralized Electricity Production from Hybrid Renewable Energy Sources for Sustainable Energy Development in Nigeria. Research Article. pp. 72-89. ISSN 1469- 8080

Oyedepo, Sunday Olayinka and Dunmade, I.S. and Adekeye, T. and Attabo, Ameh and Olawole, C. Olukunle and Babalola, P.O. and Oyebanji, J.A. and Udo, Mfon .O and Kilanko, O. O and Leramo, R.O. (2019) Bioenergy technology development in Nigeria – pathway to sustainable energy development. Int. J. Environment and Sustainable Development, 18 (2). pp. 175-205.

Babalola, P.O. and Inegbenebor, A.O. and Bolu, Christian and John, Shella I. (2019) COMPARISON OF THE MECHANICAL CHARACTERISTICS OF ALUMINIUM SIC COMPOSITES CAST IN SAND AND METAL MOULDS. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2). pp. 1671-1681. ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Loto, R. T. and Babalola, P.O. (2019) Corrosion resistance of low SiC particle variation at low weight content on 1060 aluminum matrix composite in sulfate-contaminated seawater. Results in Physics.

Oyedepo, Sunday Olayinka and Adeyemi, Gideon Adewale and Fayomi, O. S. I and Fagbemi, O.K. and Solomon, R. and Adekeye, T. and Babalola, P.O. and Akinyemi, M. L. and Olawole, C. Olukunle and Joel, E. S. and Nwanya, S.C. (2019) Dataset on noise level measurement in Ota metropolis, Nigeria. Data in Brief, 22. pp. 762-770.

Loto, R. T. and Babalola, P.O. (2019) Electrochemical analysis of SiC compositeadditions at 7.5% weight content on the corrosionresistance of monolithic aluminium alloy insulphate–chloride solution. Journal of Materials Research and Technology.

Oyedepo, Sunday Olayinka and Adeyemi, Gideon Adewale and Olawole, C. Olukunle and Olawole, O.I. and Fagbemi, O.K. and Solomon, R. and Ongbali, Samson O. and Babalola, P.O. and Dirisu, Joy Favour and Efemwenkiekie, K. U. and Adekeye, T. and Nwaokocha, Collins N. (2019) A GIS – based method for assessment and mapping of noise pollution in Ota metropolis, Nigeria. MethodsX, 6. pp. 447-457.

Odunfa, K. M. and Adeyeye, K. A. and Babalola, P.O. (2019) Numerical Modeling of Aircraft Wing Deflection under Different Loading Conditions. International Journal Of Modern Engineering Research, 8 (11). pp. 71-79. ISSN 2249–6645

Ongbali, Samson O. and Afolalu, Sunday A. and Babalola, P.O. (2019) SUPPLY CHAIN MANAGEMENT AND THE ACCOMPANYING PROBLEMS IN PRODUCTION ENVIRONMENT: A REVIEW. International Journal of Mechanical Engineering and Technology, 10 (5). pp. 613-619. ISSN 0976-6340 and ISSN Online: 0976-6359

Edeghe, M. B and Babalola, P.O. (2018) 200 Watts Portable Solar Generator for a Typical Barbing Salon. IOP Conf. Series: Materials Science and Engineering.

Loto, R. T. and Babalola, P.O. (2018) Analysis of SiC grain size variation and NaCl concentration on the corrosion susceptibility of AA1070 aluminium matrix composites. Cogent Engineering, 5.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Oyedepo, Sunday Olayinka and Kilanko, O. O and Adeyemi, Gideon Adewale (2018) Application of solar photovoltaic system to power air blower and mixing mechanism in a tilting furnace. World Review of Science, Technology and Sust. Development, X (Y, xxx). pp. 1-10.

Kilanko, O. O and Ojolo, S.J and Inegbenebor, A.O. and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Oyedepo, Sunday Olayinka (2018) Design and performance evaluation of centrifugal cashew nut sheller for improving the whole kernel recovery. AgricEnglnt: CIGR, 20 (1). pp. 162-170.

Loto, R. T. and Babalola, P.O. (2018) Effect of alumina nano-particle size and weight content on the corrosion resistance of AA1070 aluminum chloride/sulphate solution. Results in Physics. pp. 731-737.

Loto, R. T. and Babalola, P.O. (2018) Effect of alumina nano-particle size and weight content on the corrosion resistance of AA1070 aluminum in chloride/sulphate solution. Results in Physics, 10. pp. 731-737.

Akinola, Adedotun and Adeboye, A. B. and Oluwatayo, A. A. and Alagbe, O. A. and Babalola, P.O. and Afolabi, A.O. (2018) Survey dataset on architect's awareness and adoption of building envelope technologies for energy efficient housing in Lagos State. Data in Brief.

Oyedepo, Sunday Olayinka and Babalola, P.O. and Nwanya , Stephen and Kilanko, O. O and Leramo, R.O. and Aworinde, Abraham K. and Adekeye, T. and Oyebanji, J.A. and Abidakun, O.A. and Agberegha, Orobome Larry (2018) Towards a Sustainable Electricity Supply in Nigeria: The Role of Decentralized Renewable Energy System. European Journal of Sustainable Development Research, 2 (4). ISSN 2542-4742

Loto, R. T. and Babalola, P.O. (2017) Corrosion polarization behavior and microstructuralanalysis of AA1070 aluminium silicon carbide matrix composites in acid chloride concentrations. Cogent Engineering, 4.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. (2017) Artificial Neural Network Prediction of Aluminium Metal Matrix Composite with Silicon Carbide Particles Developed Using Stir Casting Method. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 15 (6). pp. 151-158.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Kilanko, O. O and Oyedepo, Sunday Olayinka and Odunfa, K. M. (2017) Producing AA1170 Based Silicon Carbide Particulate Composite through Stir Casting Method. Asian Journal of Materials Chemistry, 2 (3). pp. 1-5.

Oyedepo, Sunday Olayinka and Fagbenle, R. O. and Babarinde, T.O. and Odunfa, K. M. and Leramo, R.O. and Ohunakin, O.S. and Ajayi, O. O. and Babalola, P.O. and Kilanko, O. O and Oyegbile, A.D and Lawson-Jack, D (2017) A COMPARATIVE STUDY ON THE PERFORMANCE OF THE DOMESTIC REFRIGERATOR USINGR600A AND LPG WITH VARYING REFRIGERANT CHARGE AND CAPILLARY TUBE LENGTH. International Journal of Energy for a Clean Environment, 18 (4). pp. 287-302.

Loto, R. T. and Loto, C. A. and Olaitan, Akanji Lukman and Babalola, P.O. (2017) Evaluation of the synergistic properties of 4-hydroxy-3-methoxybenzaldehyde and 1, 4-diaminobenzene on the electrochemical corrosion behaviour of mild steel in dilute acid solutions. Moroccan Journal of Chemistry. pp. 81-95. ISSN 2351-812X

Inegbenebor, A.O. and Bolu, Christian and Babalola, P.O. and Inegbenebor, A. I. and Fayomi, O. S. I (2016) Aluminum Silicon Carbide Particulate Metal Matrix Composite Development Via Stir Casting Processing. Springer. ISSN 1570-646X

Oyedepo, Sunday Olayinka and Adekeye, T. and Leramo, R.O. and Kilanko, O. O and Babalola, P.O. and Balogun, A. O. and Akhibi, M. O. (2016) Assessment of Energy Saving Potentials in Covenant University, Nigeria. Energy Engineering, 113 (3). pp. 7-26.

Oyedepo, Sunday Olayinka and Fagbenle, R. O. and Babarinde, T.O. and Odunfa, K. M. and Oyegbile, A.D and Leramo, R.O. and Babalola, P.O. and Kilanko, O. O and Adekeye, T. (2016) Effect of Capillary Tube Length and Refrigerant Charge on the Performance of Domestic Refrigerator with R12 and R600a. International Journal of Advanced Thermofluid Research, 2 (1). ISSN 2455-1368 (Online)

Inegbenebor, A.O. and Bolu, Christian and Babalola, P.O. and Inegbenebor, A. I. and Fayomi, O. S. I (2016) Influence of the Grit size of Silicon Carbide Particles on the Mechanical and Electrical Properties of Stir Casting Aluminum Matrix Composite Material. Springer, 8 (4). pp. 573-578. ISSN 1570-646X

Oyedepo, Sunday Olayinka and Fagbenle, Olabosipo I. and Babarinde, T.O. and Odunfa, K. M. and Leramo, R.O. and Babalola, P.O. and Kilanko, O. O and Oyegbile, A.D and Lawson-Jack, D (2016) Thermodynamic Performance Analysis and Optimization of Domestic Refrigerator with Varying Refrigerant Charge and Capillary Tube Lengths. Energy Procedia. pp. 1-6.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. (2015) Artificial Neural Network Prediction of Aluminium Metal Matrix Composite with Silicon Carbide Particles Developed Using Stir Casting Method. International Journal of Mechanical & Mechatronics Engineering, 15 (2).

Babalola, P.O. and Inegbenebor, A.O. and Bolu, Christian and Inegbenebor, A. I. (2015) The Development of Molecular-Based Materials for Electrical and Electronic Applications. The Journal of The Minerals, Metals & Materials Society (TMS), 67 (4). pp. 830-833. ISSN 1047-4838

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Odunfa, K. M. (2014) Development of Aluminium Matrix Composites: A review. Online International Journal of Engineering and Technology Research, 2. pp. 1-11. ISSN 2346-7452

Odunfa, K. M. and Dare, A. A. and Adeaga, O. A. and Babalola, P.O. (2013) Effect of Building Orientation on Energy Conservation. Online Journal of Architecture and Building Technology, 1. pp. 1-5.

Babalola, P.O. and lnegbenebor, A. O. and Bolu, Christian (2012) Design and construction of tilting furnace for producing aluminium matrix composites. Proc. ICCEM. 260- 271.

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Joseph, O. O and Akinlabi, Esther T. and Babalola, P.O. and Udoye, Nduka Ekene and Ajayi, O. O. UNSPECIFIED

Book Section

Mbonu, C. C. and Kilanko, O. O and Kilanko, M. B. and Babalola, P.O. (2022) Turbidity and Urine Turbidity: A Mini Review. In: Bioenergy and Biochemical Processing Technologies. Springer, Cham, Switzerland, pp. 253-267. ISBN  Print ISBN978-3-030-96720-8  Online ISBN978-3-030-96721-5

Babalola, P.O. and Okunuga, T. A. and Inegbenebor, A.O. and Kilanko, O. O and Udo, Mfon .O (2022) Manufacturing of Brake Pad Using Aluminium Silicon Carbide Reinforced with Alumina for Automobile Industry. In: Advanced Manufacturing in Biological, Petroleum, and Nanotechnology Processing. Springer, Cham, Switzerland, pp. 37-44.

Mbonu, C. C. and Kilanko, O. O and Kilanko, M. B. and Babalola, P.O. (2022) Smart Toilets and Toilet Gadgets in Sustainable Smart Cities: An Overview of Personal Health Monitoring. In: Advanced Manufacturing in Biological, Petroleum, and Nanotechnology Processing. Springer, Cham, Switzerland, pp. 143-156. ISBN Print ISBN978-3-030-95819-0  Online ISBN978-3-030-95820-6

Oyedepo, Sunday Olayinka and Anifowose, Emmanuel G. and Obembe, Elizabeth O. and Dirisu, J. O. and Khanmohamadi, Shoaib and Kilanko, O. O and Babalola, P.O. and Ohunakin, O.S. and Leramo, R.O. and Olawole, C. Olukunle (2021) Assessment of Economic and Environmental Impacts of Energy Conservation Strategies in a University Campus. In: Green Energy: Solar Energy, Photovoltaics, and Smart Cities. Scrivener Publishing LLC.

Oyedepo, Sunday Olayinka and Anifowose, Emmanuel G. and Obembe, Elizabeth O. and Dirisu, J. O. and Khanmohamadi, Shoaib and Kilanko, O. O and Babalola, P.O. and Ohunakin, O.S. and Leramo, R.O. and Olawole, C. Olukunle (2020) Assessment of Economic and Environmental Impacts of Energy Conservation Strategies in a University Campus. In: Green Energy: Solar Energy, Photovoltaics, and Smart Cities. Scrivener Publishing LLC. ISBN ISBN: 9781119760801  Print ISBN: 9781119760764

Conference or Workshop Item

Dunmade, I.S. and Babalola, P.O. and Fayomi, O. S. I (2022) Bioeconomy, digital economy, sharing economy, industry 4.0, and other new concepts: A look at how the pieces fit together. In: TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY, 28–30 May 2021, Athens, Greece.

Babalola, P.O. and Kilanko, O. O and Ishola, Felix and Oyedepo, Sunday Olayinka and Ayoola, A. A. and Mbah, S. C (2022) Solar powered vaccine refrigerator for rural off-grid areas in Nigeria. In: TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY: TMREES21Gr, 28–30 May 2021, Athens, Greece.

Kilanko, O. O and Leramo, R.O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Babalola, P.O. and Ilori, T. A and Mozea, K.P. and Patrick, P.N. (2021) Design and construction of a manual food grinder. In: International Conference on Engineering for Sustainable World, 2021, Online.

Oriyomi, Moses Oluwayimika and Babalola, P.O. (2021) Development of Adult Mosquito Fanless Trap. In: International Conference on Engineering for Sustainable World, 2021, Online.

Ajewole, M O and Ogidan, O K and Babalola, P.O. and Oloruntoba, O (2021) Development and Prototyping of an Automated Temperature Scanner with Contact Tracing Capability. In: Journal of Physics: Conference Series.

Udo, Mfon .O and Babalola, P.O. and Ongbali, Samson O. and Banjo, SolomonO. and Obasa, Victoria and Adelore, Jesutoni (2021) Effect of Fibre Glass Addition on the Mechanical Properties of Glass Fibre Reinforced Polymer (GFRP) Composite. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Oyedepo, Sunday Olayinka and Oyebanji, J.A. and Ukponu, S. N. and Kilanko, O. O and Babalola, P.O. and Fayomi, O. S. I and Dirisu, J. O. and Olawole, C. Olukunle and Leramo, R.O. and Dunmade, I.S. and Efemwenkiekie, K. U. and Shopeju, O. O. (2021) Generation of Typical Meteorological Year Data for a City in South- Western Nigeria. In: International Conference on Engineering for Sustainable World, 2021, Online.

Babalola, P.O. and Kilanko, O. O and Banjo, SolomonO. and Ogulu, J.O. and Makinde, Adebisi and Jolayemi, Kayode J. and Ayara, Williams A. (2021) Reinforcement of AA1237 with Al2O3 to form Metal Matrix Composite. In: International Conference on Engineering for Sustainable World, 2019, Online.

Babalola, P.O. and Afiba, O. E. (2021) Solar powdered cars - a review. In: International Conference on Engineering for Sustainable World, 2021, Online.

Edun, B.M and Ajayi, O. O. and Babalola, P.O. and Salawu, Enesi Y. (2021) effect of Heat Treatment Method on the Fatigue Behaviour of Hammermill: A Review. In: International Conference on Engineering for Sustainable World, 2021, Online.

Kilanko, O. O and Leramo, R.O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Babalola, P.O. and Ilori, T. A and Mozea, K.P. and Patrick, P.N. (2020) Design and construction of a manual food grinder. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Banjo, SolomonO. and Babalola, P.O. and osagie, I. and Joseph, O. O and Williams, Akan B. and Fayomi, O. S. I and Bolu, Christian and Afolalu, Sunday A. (2020) Design and development of a table-mounted manual drilling machine for the rural purpose. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Oriyomi, Moses Oluwayimika and Babalola, P.O. (2020) Development of Adult Mosquito Fanless Trap. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

OLAOLUWAYINKA, O. and Inegbenebor, A.O. and Fayomi, O. S. I and Udoye, Nduka Ekene and Babalola, P.O. (2020) Development of Heat sink from Aluminium Silicon Carbide for Electrical and Electronic Applications. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Udo, Mfon .O and Babalola, P.O. and Afolalu, Sunday A. and Ongbali, Samson O. and Apeh, F. I. and Olayiwola-Busari, Olamilekan (2020) EFFECT OF SIC REINFORCEMENT ON MECHANICAL AND ELECTRICAL PROPERTIES OF MAGNESIUM- ALUMINIUM (MG-AG) ALLOY MATRIX COMPOSITE. In: International Conference on Engineering for Sustainable World, 2020, Online.

Edun, B.M and Ajayi, O. O. and Babalola, P.O. and Salawu, Enesi Y. (2020) Effect of Heat Treatment Methods on the Fatigue Behaviour of Hammermill: A Review. In: ICISW�.

Oyedepo, Sunday Olayinka and Oyebanji, J.A. and Ukponu, S. N. and Kilanko, O. O and Babalola, P.O. and Fayomi, O. S. I and Dirisu, Joy Favour and Olawole, C. Olukunle and Leramo, R.O. and Dunmade, I.S. and Efemwenkiekie, K. U. and Shopeju, O. O. (2020) Generation of Typical Meteorological Year Data for a City in South-Western Nigeria. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Babalola, P.O. and Kilanko, O. O and Banjo, SolomonO. and Ogulu, J.O. and Makinde, Adebisi and Jolayemi, Kayode J. and Ayara, Williams A. (2020) Reinforcement of AA1237 with Al2 O3 to form Metal Matrix Composite. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Babalola, P.O. and Atiba, Opemipo E. (2020) Solar powered cars - a review. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Fayomi, O. S. I and Joseph, O. O and Fashola, O. J. and Popoola, A. P. I. and Loto, C. A. and Samuel, O.D. and Banjo, SolomonO. and AKANDE, I.G and Joshua, T.O and Abdulwahab, M and Babalola, P.O. and Ademuyiwa, F. and Ayoola, A. A. and Sanni, T.F. and Fayomi, J. (2020) Surface Protection of Carbon Steel with ZrO2 Composite Induced Zinc Based Electrolytic cell via Electrodeposition Technique. In: International Conference on Engineering for Sustainable World, 2019, Online.

Ogunrinola, I. E. and Ndubuisi, A. O. and Babalola, P.O. and Akinyemi, M. L. and Aizebeokhai, A. P. and Inegbenebor, A.O. (2019) Al-Si alloy for thermal storage applications-a review. In: International Conference on Engineering for Sustainable World, 2019, Online.

Kilanko, O. O and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Eluwa, Stephen E. and Onyenma, F. A. and Ameh, N. I. and Onwordi, Patrick Nwanne and Aworinde, Abraham K. and Fajobi, M. A. (2019) Design and Performance Evaluation of a Solar Dryer. In: International Conference on Engineering for Sustainable World, 2019, Online.

Kilanko, O. O and Ojolo, S.J and Inegbenebor, A.O. and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Oyedepo, Sunday Olayinka and Ishola, Felix and Onwordi, Patrick Nwanne (2019) Development of Cashew nut Shelling Machine. In: International Conference on Engineering for Sustainable World, 2019, Online.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Kilanko, O. O and Ongbali, Samson O. (2019) Modification to Metal Matrix Composites Nomenclature. In: International Conference on Engineering for Sustainable World, 2019, Online.

Babalola, P.O. and Omada, J. E. and Kilanko, O. O and Banjo, SolomonO. and Ozuor, O. (2019) Performance Evaluation of a Centrifugal Pump with different Impeller Materials. In: International Conference on Engineering for Sustainable World, 2019, Online.

Banjo, SolomonO. and Bolaji, Bukola O. and Ajayi, O. O. and Babalola, P.O. and Ibhadode, Osagie and Onokwai, Anthony O. (2019) Performance enhancement using appropriate mass charge of R600a in a developed domestic refrigerator. In: International Conference on Energy and Sustainable Environment, 2019, Online.

Inegbenebor, A.O. and Inegbenebor, A. I. and Ajayi, E. I. and Aladesuyi, O. and Ogunleye, O. M. and Fayomi, O. S. I and Babalola, P.O. and Omoleye, James and Boyo, H. I. and Adebesin, A. A. (2019) Reconnaissance Study of Smectite ores of Lafarge- Ewekoro, Ogun State Nigeria for Industrial Applications. In: International Conference on Engineering for Sustainable World, 2019, Online.

Ishola, Felix and Babalola, P.O. and Olatunji, Obafemi and Ogunrinola, Iyanuoluwa and Ayo, Olayinka and Akinlabi, Stephen A. (2019) Succinct Review on State-of-art Carbon-based Phase Change Material for Solar Thermal Storage Applications. In: E3S Web of Conferences 152, 2020.

Babalola, P.O. and Oriyomi, Moses Oluwayimika (2018) The Development of Fume Extractor for a Welding Booth. In: IOP Conf. Series: Materials Science and Engineering.

Kilanko, O. O and Ojolo, S.J and Inegbenebor, A.O. and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Onwordi, Patrick Nwanne (2018) Effect of Pre-Shelling Treatment on Physical and Mechanical Properties of Cashew Nut. In: IOP Conf. Series: Materials Science and Engineering.

Babalola, P.O. and Kilanko, O. O and Bolu, Christian and Inegbenebor, A.O. and Oyawale, Fetus A and Adeosun, Oluropo (2018) Empirical Models for Mechanical and Electrical Characteristics of Wrought Aluminium Alloy Reinforced with Silicon Carbide Particles. In: IOP Conf. Series: Materials Science and Engineering.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Kilanko, O. O (2018) Graphical Representations of Experimental and ANN Predicted Data for Mechanical and Electrical Properties of AlSiC Composite Prepared by Stir Casting Method. In: IOP Conf. Series: Materials Science and Engineering.

Nwanji, E. C and Babalola, P.O. (2018) Synthesizing a Metal Matrix Composite (Al- Al2O3) from Aluminium (AA1237) Reinforced with Alumina (Al2O3) Particulates. In: IOP Conf. Series: Materials Science and Engineering.

Oyedepo, Sunday Olayinka and Adekeye, T. and Lerarno, R. O. and Kilanko, O. O and Babalola, P.O. and Balogun, A. O. and Akhibi, M. O. (2015) A Study on Energy Demand and Consumption in Covenant University, Ota, Nigeria. In: 2nd Covenant University Conference on African Development Issues (CU-ICADI), 11th - 13th May, 2015, Africa Leadership Development Center, Covenant University, Ota, Nigeria..

Oyedepo, Sunday Olayinka and Adekeye, T. and Leramo, R.O. and Kilanko, O. O and Babalola, P.O. (2015) A Study on Energy Demand and Consumption in Covenant University, Ota, Nigeria. In: A Study on Energy Demand and Consumption in Covenant University, Ota, Nigeria, Covenant University.

Babalola, P.O. (2012) Design and Construction of Parabolic Solar Heater Using Polymer Matrix Composite. In: 2012 International Conference on Clean Technology and Engineering Management (ICCEM 2012), 12th-15th, Mechanical Engineering,Covenant University,Ota,Nigeria.

Babalola, P.O. (2012) Electromechanical Systems in Building Services Engineering. In: 2012 International Conference on Clean Technology and Engineering Management (ICCEM 2012).

Inegbenebor, A.O. and Babalola, P.O. (2009) Nigerian Capacity for the Development of Advanced Engineering Materials. In: RMRDC Techno-Expo'09 A Tecnology and Innovation Fair.

Babalola, P.O. (2009) Non-Convective Solar Pond as a Thermal Energy Source. In: International Conference/ Workshop on Renewable Energy and Climate Change Mitigation, July 13-17, 2009, Covenant University, Ota.

This list was generated on Mon Dec 23 15:10:00 2024 WAT.