University Links: Home Page | Site Map
Covenant University Repository

Items where Author is "Fayomi, O. S. I"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 327.

Article

Fayomi, O. S. I and Udoye, Nduka Ekene and Oyedepo, Itopa G and Okeniyi, Joshua Olusegun (2023) Hybridization Effect of Nickel-Zinc Coating on Carbon Steel for Service Life Improvement. ENGINEERING FUNCTIONAL AND SPECIAL MATERIALS, 951. pp. 47-56.

Agboola, Oluranti and Oginni, Grace Ayomide and Oladokun, Olagoke and Efeovbokhan, Vincent Enon and Ayeni, .A. O. and Ayoola, A. A. and Adedamola, Adedayo Adeyanju and Alagbe, Edith Egbimhanlu. and Fayomi, O. S. I and Moropeng, Mapula Lucey and Ogunlade, Stephen Kehinde (2023) Synthesis of PET-Magnesium Oxide-Chitosan Nanocomposite Membranes for the Dehydration of Natural Gas. Periodica Polytechnica Chemical Engineering, 67 (2). pp. 213-224.

Fayomi, O. S. I and Biodun, Biola Mathew and Okeniyi, Joshua Olusegun (2022) Metallic Oxide Nanoparticle from Agricultural Waste: A Review on Composition and Application. Key Engineering Materials, 936. pp. 157-174.

Fayomi, O. S. I and Dauda, K.T and Udoye, Nduka Ekene and Oyebanji, J.A. and Sojobi, J. W. and Daramola, Olawande and Ogunsanya, A O (2022) A short view on the stress corrosion cracking and the prospect of ecofriendly inhibitors. The Journal Of Chemical Physics Special Topic Water : Molecule Origins Of its Anomalies, 2437 (1). pp. 1-15. ISSN 1551-7616 0094-243X

Udoye, Nduka Ekene and Fayomi, O. S. I and Inegbenebor, A.O. and Okolie, T. A. Sociis and Dirisu, J. O. and Jen, TC (2022) Corrosion impact of AA6061/clay composite for industrial application. AIP Conference Proceedings.

Udoye, Nduka Ekene and Ezike, G.E and Fayomi, O. S. I and Dirisu, J. O. (2022) The Study on Mechanical and Electrical Properties of AA6061/ Snail Shell Composites. International Journal of Chemical Engineering, 2022 (9). pp. 1-9. ISSN 1687-806X

Leramo, R.O. and Adekoya, Lawson O. and Kilanko, O. O and Oyedepo, Sunday Olayinka and Eluwa, Stephen E. and Babalola, P.O. and Adeosun, Samson O. and Leramo, Nicholas T. and Aiyedun, Peter O. and Ohunakin, O.S. and Ajayi, O. O. and Fayomi, O. S. I (2022) A comparative analysis of the chemical composition and compliance level to established standards of concrete reinforcement steel rods rolled in Nigeria. Heliyon, 8 (6).

Biodun, Biola Mathew and Fayomi, O. S. I and Okeniyi, Joshua Olusegun (2022) Comparative Analysis and Performance Characteristics of Bio-Additives Induced Fuel Blend. Key Engineering Materials, 936. pp. 117-124.

Ayoola, A. A. and Durodola, B. M. and Fayomi, O. S. I and Agboola, Oluranti and Alagbe, Edith Egbimhanlu. and Olagoke, Oladokun and Nnabuko, D. (2022) Corrosion Inhibitive Performance of the Waste Orange Peels (Citrus Sinensis) on A36 Mild Steel in 1M HCl. Int. J. Electrochem. Sci, 17.

Ayoola, A. A. and Durodola, B. M. and Fayomi, O. S. I and Agboola, Oluranti and Alagbe, Edith Egbimhanlu. and Olagoke, Oladokun and Nnabuko, D. (2022) Corrosion Inhibitive Performance of the Waste Orange Peels (Citrus Sinensis) on A36 Mild Steel in 1M HCl. Int. J. Electrochem. Sci, 17.

Biodun, Biola Mathew and Fayomi, O. S. I and Okeniyi, Joshua Olusegun (2022) Effect of Biowaste Materials on the Physical Properties of Blended Fuel for Industrial Application. Key Engineering Materials, 936.

Dirisu, J. O. and Adelekan, D.S and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Akinlabi, Esther T. and Joseph, O. O and Olayemi, Olalekan Adebayo and Okokpujie, Imhade P. (2022) Effect of Oil Bean Stalk Filler on the Thermo-Mechanical Properties of Developed Aluminium Dross Composites for Building Ceilings. Journal of The Institution of Engineers.

Agboola, Oluranti and Bakre, Boluwatife and Oladokun, Olagoke and Ayeni, .A. O. and Fayomi, O. S. I and Sadiku, Rotimi Emmanuel and Adeniyi, Amos and Popoola, Abimbola Patricia Idowu (2022) Effect of dissolved CO2 and Syzygium malaccense leaf DNA concentrations on carbon steel within a carbonic acid equilibrium. SpringerLink. ISSN 1570-646X

Adebayo, J. K. and Oyedepo, Sunday Olayinka and Petinrin, M. O. and Dare, A. A. and Nwaokocha, C. N. and Layeni, A. T. and Fayomi, O. S. I and Dirisu, J. O. and Kilanko, O. O (2022) Numerical simulation of microchannel double-pipe heat exchanger with ribs. AIP Conference, 2437 (1).

Agboola, Oluranti and Kupolati, W.K. and Fayomi, O. S. I and Akinmolayemi,, Jemima Janet and olagoke, ola and Sadiku, oluwasegun (2022) A Review on Corrosion in Concrete Structure: Inhibiting Admixtures and Their Compatibility in Concrete. spinger.

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Joseph, O. O and Akinlabi, Esther T. and Babalola, P.O. and Udoye, Nduka Ekene and Ajayi, O. O. and Aworinde, Abraham K. and Banjo, SolomonO. and Oluwasegun, K.M (2022) Thermal-emission assessment of building ceilings from agro-industrial wastes. Fuel Communications, 10.

Dirisu, J. O. and Joseph, O. O and Babalola, P.O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Oluwasegun, K.M and Nduka, Udoye and Ajayi, O. O. and Ajibero, Michael (2022) Utilization of Waste Materials for Eco-Friendly Building Ceilings: An Overview. Key Engineering Materials. pp. 285-295.

Leramo, R.O. and Adekoya, Lawson O. and Kilanko, O. O and Oyedepo, Sunday Olayinka and Eluwa, Stephen E. and Babalola, P.O. and Adeosun, Samson O. and Leramo, Nicholas T. and Aiyedun, Peter O. and Ohunakin, O.S. and Ajayi, O. O. and Fayomi, O. S. I (2022) A comparative analysis of the chemical composition and compliance level to established standards of concrete reinforcement steel rods rolled in Nigeria. Heliyon, 8 (6). ISSN 2405-8440

Joseph, O. O and Fayomi, O. S. I and Joseph, Olakunle O. and Afolalu, Sunday A. and Mubaiyi, M. P. and Olotu, O. N. and Fashola, O. J. (2022) A comparative study on the corrosion behaviour of welded and un-welded API 5L X70 steel in simulated fuel grade ethanol. Cogent Engineering.

Udoye, Nduka Ekene and Inegbenebor, A.O. and Fayomi, O. S. I and Oluwasegun, K.M and Ezegwu, C. A. (2022) The influence of aluminium metal matrix composite reinforcement - A mini review. The Journal of Chemical Physics, 2437 (1). ISSN Online ISSN 1551-7616  Print ISSN 0094-243X

Udoye, NE and Inegbenebor, A.O. and Fayomi, O. S. I and Dirisu, J. O. (2022) The influence of aluminum metal matrix composite reinforcement - A mini review. AIP Conference Proceedings.

Udoye, Nduka Ekene and Nnamba, O. J. and Fayomi, O. S. I and Inegbenebor, A.O. and Jolayemi, Kayode J. (2021) Analysis on mechanical properties of AA6061/Rice husk ash composites produced through stir casting technique. Materials Today: Proceedings, 43. pp. 1415-1420.

Fayom, J. and Popoola, A. P. I. and Popoola, M.O. and Fayomi, O. S. I (2021) The Appraisal of the thermal properties, electrical response, and corrosion resistance performance of AA8011 reinforced Nano Si3N4 for automobile application. Journal of Alloys and Compounds, 850 (5). ISSN 0925-8388

Fayomi, O. S. I and Sode, A. A. and Anyanwu, B. U. and Ayoola, A. A. and Nkiko, Mojisola O. and Oluwasegun, K.M (2021) Experimental studies and influence of process factor on zinc-nickel based coating on mild steel. Advances in Materials and Processing Technologies.

Fakeye, B. A. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Dirisu, J. O. and Udoye, Nduka Ekene (2021) Fossil Fuel Combustion, Conversion to Near-Zero Waste Through Organic Rankine Cycle. Handbook of Smart Materials, Technologies, and Devices. pp. 1-19.

Fayomi, J. and Popoola, A. P. I. and Popoola, M.O. and Fayomi, O. S. I and Ajenifuja, E. (2021) Response evaluation of AA8011 with nano ZrB2inclusion formultifunctional applications: Considering its thermal, electrical, andcorrosion properties. Journal of Alloys and Compounds, 853. ISSN 0925-8388

Agboola, Oluranti and Kupolati, W.K. and Fayomi, O. S. I and Ayeni, .A. O. and Ayodeji, Ayoola and Akinmolayemi, Jemima Janet and Olagoke, Oladokun and Sadiku, Rotimi Emmanuel and Oluwasegun, K.M (2021) A Review on Corrosion in Concrete Structure: Inhibiting Admixtures and Their Compatibility in Concrete. Journal of Bio- and Tribo-Corrosion, 8 (25).

Agboola, Oluranti and kupolati, kahinde Williams and Fayomi, O. S. I and Ayeni, .A. O. and Ayodeji, Ayoola and Akinmolayemi, Jemima Janet and Olagoke, Oladokun and Sadiku, Rotimi Emmanuel and Oluwasegun, K.M (2021) A Review on Corrosion in Concrete Structure: Inhibiting Admixtures and Their Compatibility in Concrete. SpringerLink. ISSN 1570-646X

Agboola, Oluranti and Fayomi, O. S. I and Ayoola, A. A. and Ayeni, .A. O. and Alagbe, Edith Egbimhanlu. and Sanni, Samuel Eshorame and Okoro, Emeka Emmanuel and Moropeng, Lucey and Sadiku, Rotimi Emmanuel and Kupolati, W.K. and Oni, Babalola Aisosa (2021) A Review on Polymer Nanocomposites and Their Effective Applications in Membranes and Adsorbents for Water Treatment and Gas Separation. membranes, 11 (139).

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Salawu, Enesi Y. and Oyekunle, J. A. O. and Asere, A.A. and Efemwenkiekie, K. U. (2021) Surface Chemistry Studies of Emission and Thermal Behaviour of Developed Composites for Building Ceiling Materials. Silicon.

Udoye, Nduka Ekene and Inegbenebor, A.O. and Fayomi, O. S. I (2021) The analysis on electrical conductivity of AA6061/rice husk ash composites. Materials Today: Proceedings, 43. pp. 2245-2249.

Fayomi, O. S. I and AKANDE, I.G and Essien, V. and Asaolu, Aderonke Olufunke and Esse, Ugwunwa C. (2020) Advances in Concepts of Ergonomics with Recent Industrial Revolution. IOP Conference Series: Materials Science and Engineering, 1107 (012010).

Kilanko, O. O and Fayomi, O. S. I and Sode, A. A. (2020) Anticorrosion Effect of Silicon Nitride and Zirconium Diboride Composite on Ni–P– Zn Electroless Deposition on Mild Steel. Journal of Bio- and Tribo-Corrosion, 6.

Fayomi, O. S. I (2020) Assessing the impact of Si3N4composite films and processvariable on the structural and corrosion improvement of structural steel used in construction industry. Case Studies in Construction Materials.

Udoye, Nduka Ekene and Inegbenebor, A.O. and Fayomi, O. S. I (2020) Corrosion Performance and Wear Behaviour of AA6061 Reinforced Hybrid: Nano-Rice Husk Ash/Clay Particulate for Cooling Tower Fan Blade in 0.75 M H2SO4. Journal of Bio- and Tribo-Corrosion, 62.

Kilanko, O. O and Ojolo, S.J and Leramo, R.O. and Ilori, T. A and Oyedepo, Sunday Olayinka and Babalola, P.O. and Fayomi, O. S. I and Onwordi, Patrick Nwanne and Ufot, Edidiong and Ekwere, Akaninyene (2020) Dataset on physical properties of raw and roasted cashew nuts. Data in Brief.

Oyedepo, Sunday Olayinka and Kilanko, O. O and Waheed, M. A. and Fayomi, O. S. I and Ohunakin, O.S. and Babalola, P.O. and Ongbali, Samson O. and Nwaokocha, Collins N. and Mabinuori, B. and Shopeju, O. O. (2020) Dataset on thermodynamics performance analysis and optimization of a reheat –regenerative steam turbine power plant with feed water heaters. Data in Brief. ISSN 2352-3409

Dirisu, J. O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka (2020) Efficacy of Quasi Agro Binding Fibre on the Hybrid Composite Used in Advance Application. Advances in Manufacturing Engineering. pp. 565-574.

Agboola, Oluranti and Fayomi, O. S. I and Sadiku, Rotimi Emmanuel and Ayoola, A. A. and Mokrani, Touhami and Mbuli, B.S. and Popoola, A. P. I. and Perry, G. (2020) Evaluation of chitosan/sisal fiber/polyethylene membranes. Materials Today: Proceedings.

Udoye, Nduka Ekene and Fayomi, O. S. I and Inegbenebor, A.O. (2020) Fractography and Tensile Properties of AA6061 Aluminium Alloy/ Rice Husk Ash Silicon Nanocomposite. International Journal of Chemical Engineering.

Ayoola, A. A. and Fayomi, O. S. I and AKANDE, I.G and Ayeni, .A. O. and Agboola, Oluranti and Obanla, O. R. and Abatan, Olubunmi G. and Chukwuka, C. J. (2020) Inhibitive Corrosion Performance of the Eco‐Friendly Aloe Vera in Acidic Media of Mild and Stainless Steels. Journal of Bio‐ and Tribo‐Corrosion, 6 (67).

Amusan, L. M. and Aigbavboa, Clinton and Fayomi, O. S. I and Owolabi, J. D (2020) Lean Thinking and Industrial 4.0 Approach to Achieving Construction 4.0 for Industrialization and Technological Development. Buildings, 20. pp. 1-27.

Ayoola, A. A. and Hymore, F. K. and Omonhinmin, Conrad A. and Babalola, P.O. and Fayomi, O. S. I and Olawole, C. Olukunle and Olawepo, A.V and Babalola, A (2020) Response surface methodology and artificial neural network analysis of crude palm kernel oil biodiesel production. Chemical Data Collections, 28.

Agboola, Oluranti and Sadiku, Rotimi Emmanuel and Popoola, P and Fayomi, O. S. I and Ayeni, .A. O. and Dick, D. T. and Adegbola, Adesola Taoreed and Moropeng, Mapula Lucey and Ramakhokhovhu, M. (2020) Surface roughness of ternary blends: Polypropylene/chitosan/sisal fiber membranes. Materials Today: Proceedings.

Oyebanji, J.A. and Okekunle, P. O. and Fayomi, O. S. I (2020) Synthesis and characterization of zeolite-Y using Ficus exasperata leaf: A preliminary study. Case Studies in Chemical and Environmental Engineering, 2.

Dirisu, Gabriel B. and Okonkwo , Ugochukwu C. and Okokpujie, Imhade P. and Fayomi, O. S. I (2019) Comparative Analysis of the Effectiveness of Reverse Osmosis and Ultraviolet Radiation of Water Treatment. Journal of Ecological Engineering, 20 (1). pp. 61-75.

Dirisu, Gabriel B. and Okonkwo , Ugochukwu C. and Okokpujie, Imhade P. and Fayomi, O. S. I (2019) Comparative Analysis of the Effectiveness of Reverse Osmosis and Ultraviolet Radiation of Water Treatment. Journal of Ecological Engineering, 20 (1). pp. 61-75.

Dirisu, Gabriel B. and Okonkwo , Ugochukwu C. and Okokpujie, Imhade P. and Fayomi, O. S. I (2019) Comparative Analysis of the Effectiveness of Reverse Osmosis and Ultraviolet Radiation of Water Treatment. Journal of Ecological Engineering, 20 (1). pp. 61-75.

Dirisu, Gabriel B. and Okonkwo , Ugochukwu C. and Okokpujie, Imhade P. and Fayomi, O. S. I (2019) Comparative Analysis of the Effectiveness of Reverse Osmosis and Ultraviolet Radiation of Water Treatment. Journal of Ecological Engineering, 20 (1). pp. 61-75.

Udoye, Nduka Ekene and Fayomi, O. S. I and Inegbenebor, A.O. (2019) REVIEW ON PERFORMANCE OF EXISTING COOLING TOWER FAN BLADE IN THE PRODUCTION INDUSTRY. International Journal of Mechanical Engineering and Technology, 10 (1). pp. 1833-1839. ISSN 0976-6359

Ayoola, A. A. and Hymore, F. K. and Omonhinmin, Conrad A. and Olawole, C. Olukunle and Fayomi, O. S. I and Babatunde, Damilola Elizabeth and Fagbiele, Omololu Oluwatobi (2019) Analysis of waste groundnut oil biodiesel production using response surface methodology and artificial neural network. Chemical Data Collections, 22.

Ayoola, A. A. and Fayomi, O. S. I and Popoola, A. P. I. (2019) Anticorrosion properties and thin film composite deposition of Zn- SiC-Cr3C2 coating on mild steel. Defence Technology, 15. pp. 106-110.

Fayomi, O. S. I and Okokpujie, Imhade P. and Fayomi, G.U. and Okolie, S. T. (2019) The Challenge of Nigeria Researcher in Meeting up with Sustainable Development Goal in 21st Century. Energy Procedia, 157. pp. 393-404.

Enesi, Salawu Y and Ajayi, O. O. and Inegbenebor, A.O. and Fayomi, O. S. I and Popoola, A. P. I. and Uyor, U. O. (2019) Corrosion Behavior of Mild Steel in Different Concentrations of Ethanol Beverages. Journal of Bio- and Tribo-Corrosion, 6 (2).

Okokpujie, Imhade P. and Okonkwo , Ugochukwu C. and Fayomi, O. S. I and Dirisu, Gabriel B. (2019) Data on physicochemical properties of borehole water and surface water treated using reverse osmosis [RO] and ultra-violet [UV] radiation water treatment techniques. Chemical Data Collections, 20.

Oyedepo, Sunday Olayinka and Adeyemi, Gideon Adewale and Fayomi, O. S. I and Fagbemi, O.K. and Solomon, R. and Adekeye, T. and Babalola, P.O. and Akinyemi, M. L. and Olawole, O.C. and Joel, E. S. and Nwanya , S.C. (2019) Dataset on noise level measurement in Ota metropolis, Nigeria. Data in Brief, 22. pp. 762-770.

Fayomi, O. S. I and Joseph, O. O and AKANDE, I.G and Ohiri, C.K. and Enechi, K.O. and Udoye, Nduka Ekene (2019) Effect of CCBP doping on the multifunctional Al-0.5 Mg-15CCBP superalloy using liquid metallurgy process for advanced application. Journal of Alloys and Compounds, 783. pp. 246-255.

Daniel-Mkpume, C. C. and Ugochukwu, C. Chisom and Okonkwo, Ebenezer and Fayomi, O. S. I and Obiorah, S. M. (2019) Effect of Luffa cylindrica fiber and particulate on the mechanical properties of epoxy. The International Journal of Advanced Manufacturing Technology, 102. pp. 3439-3444.

Joshua, T.O and Fayomi, O. S. I and Seriki, E. O. and Ayoola, A. A. (2019) Effect of Silicon Inclusion Carbonaceous Composite Particulate on the Thermal-Ageing Characteristics and Mechanical Performance of Low Carbon Steel. Silicon. pp. 1231-1236. ISSN 1876-990X

Fayomi, O. S. I and AKANDE, I.G and Atayero, A. A. and Popoola, A. P. I. and Ayoola, A. A. (2019) Electro-mechanical, microstructure and corrosion properties of 85Al6063-15CFBP alloy for advance applications. Journal of Materials and Environmental Science, 10 (11). pp. 1152-1161. ISSN 2028-2508

Sanni, O. and Popoola, A. P. I. and Fayomi, O. S. I (2019) Electrochemical Analysis of Austenitic Stainless Steel (Type 904) Corrosion Using Egg Shell Powder in Sulphuric Acid Solution. Energy Procedia, 157. pp. 619-625. ISSN 18766102

Abioye, Oluwabunmi P. and Loto, C. A. and Fayomi, O. S. I (2019) Evaluation of Anti-biofouling Progresses in Marine Application. Journal of Bio- and Tribo-Corrosion, 5 (22).

Fayomi, O. S. I and Oluwadare, G. A. and Fakehinde, O. B and AKANDE, I.G and Nwachia, W. and Russell, A. J. (2019) Evolution of physical and mechanical characteristics of deposited composite coatings on A356 mild steel. The International Journal of Advanced Manufacturing Technology.

Fayom, J. and Popoola, A. P. I. and Oladijo, O.P. and Popoola , M.O. and Fayomi, O. S. I (2019) Experimental study of ZrB2-Si3N4 on the microstructure, mechanical and electrical properties of high grade AA8011 metal matrix composites. Journal of Alloys and Compounds. pp. 610-615.

Fayomi, O. S. I and Popoola, A. P. I. and Oladijo, O.P. and Popoola, M.O. and Fayomi, O. S. I (2019) Experimental study of ZrB2-Si3N4on the microstructure, mechanicaland electrical properties of high grade AA8011 metal matrixcomposites. Journal of Alloys and Compounds. pp. 610-615.

Osekhoghene, Dirisu Joseph and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Okokpujie, Imhade P. (2019) IGNITION TIME OF SELECTED CEILING MATERIALS AND ESCAPE TEMPERATURE TIME PREDICTION OF FIRE FIGHTER RESCUE MISSION. Journal of Chemical Technology and Metallurgy, 24 (1). pp. 64-71.

Ayoola, A. A. and Fayomi, O. S. I and Adeeyo, O.A. and Omodara, O. J. and Adegbite, O. (2019) Impact assessment of biodiesel production using CaO catalyst obtained from two different sources. Cogent Engineering.

Fayomi, O. S. I and Babaremu, Kunle and AKANDE, I.G (2019) MECHANICAL BEHAVIOUR OF COMPOSITE MATERIALS IN METAL. International Journal of Mechanical Engineering and Technology (IJMET), 10 (3). pp. 19-30. ISSN 0976-6359

Fayomi, O. S. I and Atayero, A. A. and Mubiayi, M.P. and AKANDE, I.G and Adewuyi, P. A. and Fajobi, M. A. and Ayara, Williams A. and Popoola, A. P. I. (2019) Mechanical and opto-electrical response of embedded smart composite coating produced via electrodeposition technique for embedded system in defence application. Journal of Alloys and Compounds, 773. pp. 305-313.

Fayomi, O. S. I and Atayero, A. A. and Mubiayi, M.P. and AKANDE, I.G and Adewuyi, P. A. and Fajobi, M. A. and Ayara, Williams A. and Popoola, A. P. I. (2019) Mechanical and opto-electrical response of embedded smart composite coating produced via electrodeposition technique for embedded system in defence application. Journal of Alloys and Compounds. pp. 305-313.

AKANDE, I.G and Oluwole, O. O. and Fayomi, O. S. I (2019) Optimizing the defensive characteristics of mild steel via the electrodeposition of Znsingle bondSi3N4 reinforcing particles. Defense Technology, 15. pp. 526-532.

Kgoete, F. and Popoola, A. P. I. and Fayomi, O. S. I (2019) Oxidation resistance of spark plasma sintered Ti6Al4V-TiN composites. Journal of Alloys and Compounds. pp. 943-948.

Loto, C. A. and Fayomi, O. S. I and Loto, R. T. and Popoola, A. P. I. (2019) POTENTIODYNAMIC POLARIZATION AND GRAVIMETRIC EVALUATION OF CORROSION OF COPPER IN 2M H2SO4 IN ABSENCE AND PRESENCE OF AMMONIUM DICHROMATE AS AN INHIBITOR. Journal of Chemical Technology and Metallurgy, 54 (1). 209--216.

Loto, C. A. and Fayomi, O. S. I (2019) POTENTIODYNAMIC POLARIZATION AND GRAVIMETRIC EVALUATION OF CORROSION OF COPPER IN 2M H2SO4 IN ABSENCE AND PRESENCE OF AMMONIUM DICHROMATE AS AN INHIBITOR. Journal of Chemical Technology and Metallurgy, 54 (1). pp. 209-216.

Fayomi, O. S. I and AKANDE, I.G and Popoola, A. P. I. and Molifi, Hlatswayo (2019) Potentiodynamic polarization studies of Cefadroxil and Dicloxacillin drugs on the corrosion susceptibility of aluminium AA6063 in 0.5 M nitric acid. Journal of material reserach and technology, 8 (3). pp. 3088-3096.

Udoye, Nduka Ekene and Inegbenebor, A.O. and Fayomi, O. S. I (2019) THE STUDY ON IMPROVEMENT OF ALUMINIUM ALLOY FOR ENGINEERING APPLICATION: A REVIEW. International Journal of Mechanical Engineering and Technology, 10 (3). pp. 380-385. ISSN 0976-6359

Fayomi, O. S. I and AKANDE, I.G and Popoola, A. P. I. and Popoola, Segun I. (2019) Structural Characterization and Corrosion Properties of Electroless Processed Ni–P–MnO2 Composite Coatings on SAE 1015 Steel for Advanced Application. Journal of Science: Advanced Materials and Devices.

Okokpujie, Imhade P. and Fayomi, O. S. I and Ogbonaya, S. K. and Fayomi, G.U. (2019) The Wide Margin Between the Academic and Researcher in a New Age University for Sustainable Development. Energy Procedia, 157. pp. 862-870. ISSN 18766102

Odukoya, J. A. and Fayomi, O. S. I and Chibuzoranyaegbunam, M. and Olowokere, E.I (2019) An assessment of the psychological undertones to accidents in manufacturing industries. International Journal of Mechanical and Production Engineering Research and Development, 9 (6). pp. 545-562. ISSN 2249-6890

Fayomi, O. S. I and AKANDE, I.G and Popoola, A. P. I. (2018) Corrosion Protection Effect of Chitosan on the Performance Characteristics of A6063 Alloy. Journal of Bio- and Tribo-Corrosion, 4 (73).

Fayomi, O. S. I and Atayero, A. A. and Mubiayi, M.P. and AKANDE, I.G and Adewuyi, P. A. and Fajobi, M. A. and Ayara, Williams A. and Popoola, A. P. I. (2018) Mechanical and opto-electrical response of embedded smart composite coating produced via electrodeposition technique for embedded system in defence application. Journal of Alloys and Compounds. ISSN 0925-8388 (In Press)

Ayoola, A. A. and Fayomi, O. S. I and Popoola, A. P. I. (2018) Anti-Corrosion and High Temperature Thermal Treatment of SiO2 Crystal Induced on Zinc Electrolyte on Mild Steel. Materials Focus. pp. 1-3.

Ayoola, A. A. and Fayomi, O. S. I and Popoola, A. P. I. (2018) Anticorrosion properties and thin film composite deposition of Zn-SiC-Cr3C2 coating on mild steel. Defence Technology. pp. 1-5.

Ayoola, A. A. and Fayomi, O. S. I and Popoola, A. P. I. (2018) Anticorrosion properties and thin film composite deposition of Zn-SiC-Cr3C2 coating on mild steel. Defence Technology, 15. pp. 106-110.

Ayoola, A. A. and Babalola, Rasheed and Ojewumi, M. E. and Fayomi, O. S. I (2018) Assessment of KOH and NaOH Catalysed Biodiesel from Melon Seed Oil. Materials Focus, 7. pp. 1-7.

Fayomi, O. S. I and AKANDE, I.G and Popoola, A. P. I. (2018) Corrosion Protection Effect of Chitosan on the Performance Characteristics of A6063 Alloy. Journal of Bio- and Tribo-Corrosion, 4 (73).

Babaremu, Kunle and Omodara , M.A and Fayomi, O. S. I and Okokpujie , Imhade P. and Oluwafemi , J. O. (2018) DESIGN AND OPTIMIZATION OF AN ACTIVE EVAPORATIVE COOLING SYSTEM. International Journal of Mechanical Engineering and Technology (IJMET), 9 (10). pp. 1051-1061. ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Fayomi, G.U. and Wusu, O. and Mini, S. E. and Fayomi, O. S. I and Kilanko, O. O (2018) Data analysis on the level of exposure to pollutions inindustrial zone: Acasestudy of Ewekoro and Ota Township. Data in Brief, 19. pp. 859-864. ISSN 2352-3409

Fayomi, O. S. I and Fayom, J. and Elemike, E.E. (2018) Data on anti-corrosion characteristics of eco-friendly inhibitive extract on the hot corrosion degradation trend of A6063 aluminum alloy in 1.0MHC solution. Data in Brief, 19. pp. 2468-2476.

Ayoola, A. A. and Igho, E. Blessing and Fayomi, O. S. I (2018) Data on calcium oxide and cow bone catalysts used for soybean biodiesel production. Data in Brief, 18. pp. 512-517.

Ayoola, A. A. and Fayomi, O. S. I and Ogunkanmbi, S.O. (2018) Data on inhibitive performance of chloraphenicol drug on A315 mild steel in acidic medium. Data in Brief, 19. pp. 804-809.

Fayomi, O. S. I and Daniyan, A.A. and Umoru, L. E. and Popoola, A. P. I. (2018) Data on the effect of current density relationship on the super-alloy composite coating by electrolytic route. Data in Brief, 18. pp. 776-780.

Fayom, J. and Popoola, A. P. I. and Fayomi, O. S. I and Babaremu, Kunle (2018) Data on the effect of temperature variation tendency on the inhibitive absorption of Lasienthera africanum in 0.5MHCl: Anecessity. Data in Brief, 20. pp. 2003-2011.

Kgoete, F. and Popoola, A. P. I. and Fayomi, O. S. I (2018) Data on the influence of TiN on wear and corrosion behavior of Ti–6Al–4V alloy fabricated through spark plasma sintering. Data in Brief, 19. pp. 1989-1996. ISSN 2352-3409

Fayomi, O. S. I and Udoye, Nduka Ekene and Anawe, Paul Apeye Lucky and Inegbenebor, A.O. (2018) The Effect Of Embedded Super Hard Composite On The Production Of Super Hard Materials: Necessity. Materials Focus, 7 (1). pp. 1-5.

Anawe, Paul Apeye Lucky and Fayomi, O. S. I and Ayoola, A. A. and Popoola, A. P. I. (2018) Effect of SnO2/SiO2 nano particle dispersant on the performance characteristic of complex multi-doped composite coating produced through electrodeposition on oil and gas storage tap. Results in Physics, 9. pp. 1570-1571.

Fayomi, O. S. I (2018) Effect of functional composite coating developed via sulphate and chloride process parameter on the UNS G10150 steel for structural and wear mitigation in defence application. Defence Technology, 14. pp. 196-203.

Fayomi, O. S. I (2018) Effect of functional composite coating developed via sulphate and chloride process parameter on the UNS G10150 steel for structural and wear mitigation in defence application. Defence Technology, 14. pp. 196-203.

Fayomi, O. S. I and AKANDE, I.G and Oluwole, O. O. and Daramola, D. (2018) Effect of water-soluble chitosan on the electrochemical corrosion behaviour of mild steel. Chemical Data Collections, 17 (18). pp. 321-326.

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Okokpujie, Imhade P. and Asere, A.A. and Oyekunle, J.A and Afolalu, Sunday A. and Abioye, Abiodun A. (2018) Effects of Emission Characteristics on Elemental Composition of Selected PVC Ceiling Materials. Materials Focus, 7. pp. 1-7.

Dirisu, Joy Favour and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Okokpujie, Imhade P. and Asere, A.A. and Oyekunle, J.A and Afolalu, Sunday A. and Abioye, Abiodun A. (2018) Effects of Emission Characteristics on Elemental Composition of Selected PVC Ceiling Materials. Materials Focus, 7. pp. 1-7.

Fayomi, O. S. I and Kanyane, L.R and Popoola, A. P. I. and Oyedepo, Sunday Olayinka (2018) Electrolytic deposition of super-smart composite coating of Zn-V2O5- NbO2 on low carbon steel for defence application. Defence Technology, 14. pp. 446-450.

Fayomi, O. S. I and Kanyane, L.R and Popoola, A. P. I. and Oyedepo, Sunday Olayinka (2018) Electrolytic deposition of super-smart composite coating of Zn-V2O5- NbO2 on low carbon steel for defence application. Defence Technology, 14.

Sanni, O. and Popoola, A. P. I. and Fayomi, O. S. I (2018) Enhanced corrosion resistance of stainless steel type 316 in sulphuricacid solution using eco-friendly waste product. Results in Physics (9). pp. 225-230.

Fayomi, O. S. I and Popoola, A. P. I. and Kgoete, F. and Joseph, O. O and Ayoola, A. A. (2018) Experimental study and sustainable surface-active effect of ECA hybrid particulate on tin-zinc infringement coating developed via DAECD technique on AISI 1015 steel. International Journal Nanoparticles, 10 (3). pp. 196-206.

Kgoete, F. and Popoola, A. P. I. and Fayomi, O. S. I and Adebiyi, D.I (2018) Influence of Si3N4 on Ti-6Al-4V via spark plasma sintering: Microstructure, corrosion and thermal stability. Journal of Alloys and Compounds. pp. 322-328.

Fayomi, O. S. I and Ayoola, A. A. and Omoniyi, E. B. and Okolie, S. T. (2018) Influence of aluminum silicate stabilizer on the coating structural composition and characteristics of multifunctional developed composite coating: a buildup for defense application. The International Journal of Advanced Manufacturing Technology.

AKANDE, I.G and Oluwole, O. O. and Fayomi, O. S. I (2018) Optimizing the defensive characteristics of mild steel via the electrodeposition of ZneSi3N4 reinforcing particles. Defence Technology.

Ayoola, A. A. and Blessing, Igho E. and Babalola, Rasheed and Ojewumi, M. E. and Ogunbiyi, Ajibola T and Abatan, Olubunmi G. and Fayomi, O. S. I (2018) Production of Biodiesel from Soybean Oil Using Calcium Oxide and Cow Bone as Catalysts. Materials Focus, 7 (4). pp. 542-548.

Sanni, O. and Popoola, A. P. I. and Fayomi, O. S. I (2018) The inhibitive study of egg shell powder on uns n08904 austenitic stainless steel corrosion in chloride solution. Defence Technology, 14. pp. 463-468.

Fayomi, O. S. I and Popoola, A. P. I. and Ige, O.O and Ayoola, A. A. (2017) Study of particle Incorporation and performance Characteristic of Aluminium Siliate-Zirconia Embedded on Zinc Rich Coatings for Corrosion and Wear Performance. Asian Journal of Chemistry, 29 (12). pp. 2575-2581.

Fayomi, O. S. I (2017) Data on the optimized sulphate electrolytezinc rich coating produced through in-situ variation of process parameters. Data inBrief, 16. pp. 141-146.

Fayomi, O. S. I and Popoola, A. P. I. and Kanyane, L.R and Monyai, T. (2017) Effect of Incorporating a Biodegradable Ecofriendly Additive in Pursuit of Improved Anti-Corrosion, Microstructure and Mechanical Properties of a Zn-based TiO2/TiB2 Coating by DAECD Technique. Portugaliae Electrochimica Acta, 35 (6). pp. 361-370.

Fayomi, O. S. I and Olukanni, D. O. and Fayomi, G.U. and Joseph, O. O (2017) In situ assessment of degradable carbon effusion for industrial waste water treatment. Cogent Engineering, 4. pp. 1-7.

Daniyan, A. A. and Umoru, L. E. and Popoola, A. P. I. and Fayomi, O. S. I (2017) Comparative studies of microstructural, tribological and corrosion properties of Zn-TiO2 and Zn-TiO2-WO3 nano-composite coatings. Results in Physics, 7. pp. 3222-3229.

Daniyan, A. A. and Umoru, L. E. and Popoola, A. P. I. and Fayomi, O. S. I (2017) Comparative studies of microstructural, tribological and corrosion properties of Zn-TiO2 and Zn-TiO2-WO3 nano-composite coatings. Results in Physics, 7.

Fayomi, O. S. I and Popoola, A. P. I. and Kanyane, L.R and Monyai, T. (2017) Development of reinforced in-situ anti-corrosion and wear Zn-TiO2/ZnTiB2 coatings on mild steel. Results in Physics, 7. pp. 644-650.

Ayoola, A. A. and Hymore, F. K. and Omodara, O. J. and Oyeniyi, Esther Adenike and Fayomi, O. S. I and Ugochukwu, C. Chisom (2017) Effect of Crystallisation Time on the Synthesis of Zeolite Y from Elefun Kaolinite Clay. International Journal of Applied Engineering Research, 12 (21). pp. 10981-10988. ISSN 0973-4562

Ayoola, A. A. and Hymore, F. K. and Omodara, O. J. and Oyeniyi, Esther Adenike and Fayomi, O. S. I and Chisom, Ugochukwu C (2017) Effect of Crystallisation Time on the Synthesis of Zeolite Y from Elefun Kaolinite Clay. International Journal of Applied Engineering Research, 12 (21). pp. 10981-10988. ISSN 0973-4562

Popoola, A. P. I. and Daniyan, A. A. and Umoru, L. E. and Fayomi, O. S. I (2017) Effect of WO3 Nanoparticle Loading on the Microstructural, Mechanical and Corrosion Resistance of Zn Matrix/TiO2-WO3 Nanocomposite Coatings for Marine Application. J. Marine Sci. Appl, 16. pp. 1-8.

Popoola, A. P. I. and Daniyan, A. A. and Umoru, L. E. and Fayomi, O. S. I (2017) Effect of WO3 Nanoparticle Loading on the Microstructural, Mechanical and Corrosion Resistance of Zn Matrix/TiO2-WO3 Nanocomposite Coatings for Marine Application. Journal of Marine Science and Application, 16. pp. 102-109.

Anawe, Paul Apeye Lucky and Fayomi, O. S. I (2017) Impact of Applied Potential on the Structural and Non-lubricated Wear Composite Coating in Petrochemical Industry. Portugaliae Electrochimica Acta , 35 (5). 297-303 . ISSN 1647-1571

Abdulwahab, M and Fayomi, O. S. I and Popoola, A. P. I. and Dodo, M.R. (2017) In-situ hybrid study of thermal behaviour of ZnANi and ZnANiAAl2O3 nanocrystallite thin films induced TEA/MEA by electrocodeposition. Results in Physics, 7. pp. 213-215.

Abdulwahab, M and Fayomi, O. S. I and Popoola, A. P. I. and Dodo, M.R. (2017) In-situ hybrid study of thermal behaviour of ZnANi and ZnANiAAl2O3 nanocrystallite thin films induced TEA/MEA by electrocodeposition. Results in Physics, 7. pp. 213-215.

Fayomi, O. S. I and Popoola, A. P. I. and OLORUNTOBA, D. T and Ayoola, A. A. (2017) Inhibitive characteristics of cetylpyridinium chloride and potassium chromate addition on type A513 mild steel in acid/chloride media. Cogent Engineering, 4. pp. 1-9.

Anawe, Paul Apeye Lucky and Fayomi, O. S. I and Popoola, A. P. I. (2017) Investigation of microstructural and physical characteristics of nano composite tin oxide-doped Al3+ in Zn2+ based composite coating by DAECD technique. Results in Physics, 7. pp. 777-788.

Oluyori, T. and Olorunniwo, O. E. and Fayomi, O. S. I and Atanda, P. O. and Popoola, A. P. I. (2017) Performance Evaluation Effect of Nb2O5 Particulate on the Microstructural, Wear and Anti-corrosion Resistance of Zn–Nb2O5 Coatings on Mild Steel for Marine Application. J Bio Tribo Corros, 3 (51).

Sanni, O. and Popoola, A. P. I. and Fayomi, O. S. I and Fatoba, OS (2017) Silicone oil as corrosion inhibitor for aluminium alloy in saline medium. International Journal of Microstructure and Materials Properties, 12 (1-2). pp. 115-125.

Malatji, N. and Popoola, A. P. I. and Fayomi, O. S. I (2017) The effect of nanoparticulate loading on the fabrication and characterization of multi-doped Zn-Al2O3-Cr2O3 hybrid coatings on mild steel. Int J Adv Manuf Technol, 90. pp. 2443-2452.

Inegbenebor, A.O. and Bolu, Christian and Babalola, P.O. and Inegbenebor, A. I. and Fayomi, O. S. I (2016) Aluminum Silicon Carbide Particulate Metal Matrix Composite Development Via Stir Casting Processing. Springer. ISSN 1570-646X

Malatji, N. and Popoola, A. P. I. and Fayomi, O. S. I and Loto, C. A. (2016) Multifaceted incorporation of Zn-Al2O3/Cr2O3/SiO2 nanocomposite coatings: anti-corrosion, tribological, and thermal stability. The International Journal of Advanced Manufacturing Technology, 82 (5-8). pp. 1335-1341.

Inegbenebor, A.O. and Bolu, Christian and Babalola, P.O. and Inegbenebor, A. I. and Fayomi, O. S. I (2016) Aluminum Silicon Carbide Particulate Metal Matrix Composite Development Via Stir Casting Processing. Silicon.

Abdulwahab, M and Fayomi, O. S. I and Awe, F.E. (2016) Anti-Corrosion and Passivation Potential of AA6063-Type Al-Mg-Si Alloy with Avogadro Natural Oil in HCl Solution. Journal of Advanced Electrochemistry, 2 (2). pp. 75-77.

Fayomi, O. S. I and Popoola, A. P. I. and Loto, C. A. and Adedokun, S. T. (2016) Evaluation of Composition, Microstructure Characterization and Interfacial Properties of Zn–SnO2 Metal Matrix Composite Coating. Protection of Metals and Physical Chemistry of Surfaces, 52 (2). pp. 238-243. ISSN 2070-2051

Fayomi, O. S. I and Popoola, A. P. I. and ADAMS, F.V. (2016) Evolution and Anticorrosion Properties of Ni-Cu Thin Film Coatings on Low Carbon Steel. Asian Journal of chemistry, 28 (1). pp. 129-132.

Popoola, A. P. I. and Malatji, N. and Fayomi, O. S. I (2016) Fabrication and investigation of thermal and wear properties of zinc novel coati ngs reinforced with nano-Al2O3 and Cr2O3 pa rticles. Arch. Metall. Mater, 61 (3).

Fayomi, O. S. I and Popoola, A. P. I. and Daniyan, A. A. (2016) Hybrid effect of an in situ multilayer Zn–ZnO–Cr2O3 electrodeposited nanocomposite coatings for extended application. Particulate Science and Technology. ISSN 0272-6351

Fayomi, O. S. I and Popoola, A. P. I. and Monyai, T. (2016) IMPROVING THE PROPERTIES OF MILD STEEL BY TERNARY MULTILAYER COMPOSITE COATING VIA ELECTRODEPOSITION ROUTE. Bull. Chem. Soc. Ethiop., 30 (3). pp. 449-456. ISSN 1011-3924

Seidu, S. O. and Joshua, T.O and Fayomi, O. S. I (2016) In-situ Behaviour of Selected Local Sand Binders on Microstructure and Mechanical Properties of Grey Cast Iron. J. Mater. Environ. Sci., 7 (4). pp. 1135-1144. ISSN 2028-2508

Inegbenebor, A.O. and Bolu, Christian and Babalola, P.O. and Inegbenebor, A. I. and Fayomi, O. S. I (2016) Influence of the Grit size of Silicon Carbide Particles on the Mechanical and Electrical Properties of Stir Casting Aluminum Matrix Composite Material. Springer, 8 (4). pp. 573-578. ISSN 1570-646X

Fayomi, O. S. I and Joseph, O. O and Mubiayi, M.P. and Durodola, B. M. and Gabriel, O. (2016) Microstructural evolution and characterization of super-induced MgO composite on zinc-rich coatings. egyptian journal of b a s i c and a p p l i e d s c i e n c e s, 3. pp. 1-9.

Fayomi, O. S. I and Popoola, A. P. I. and OLORUNTOBA, D. T (2016) Nanoparticle Dispersion, Microstructure and Thermal Effect of Multi-doped ZrO2/SiC from Sulphate Induced Electrolyte. Protection of Metals and Physical Chemistry of Surfaces, 52 (3). pp. 512-516. ISSN 2070-2051

Monyai, T. and Fayomi, O. S. I and Popoola, A. P. I. (2016) A Novel Effect of Solanum Tuberosum/Zn-30Al-7Ti Sulphate Modified Coating on UNS G10150 Mild Steel Via Dual-anode Electrodeposition Route. Portugaliae Electrochimica Acta, 34 (5). pp. 355-363. ISSN 1647-1571

Adekeye, T. and Adegun, I. K. and Okekunle, P. O. and Hussein, A. K. and Oyedepo, Sunday Olayinka and Adetiba, E. and Fayomi, O. S. I (2016) Numerical Analysis of the Effects of Selected Geometrical Parameters and Fluid Properties on MHD Natural Convection Flow in an Inclined Elliptic Porous Enclosure with Localized Heating. Heat Transfer—Asian Research.

Fayomi, O. S. I and Popoola, A. P. I. and Oyawale, Fetus A and Ajayi, O. O. (2016) Performance Evaluation and Multidoped Composite Conditioned of A5-type/10%Ti-Sn Alloy: Processing and Properties. J Fail. Anal. and Preven.. pp. 135-141.

Fayomi, O. S. I and Popoola, A. P. I. and Olorunniwo, O. E. (2016) Structural and properties of Zn-Al2O3-SiC nano-composite coatings by direct electrolytic process. Int J Adv Manuf Technol. ISSN 0268-3768

Abdulwahab, M and Fayomi, O. S. I and Popoola, A. P. I. (2016) Structural evolution, thermomechanical recrystallization and electrochemical corrosion properties of Ni-Cu-Mg amorphous coating on mild steel fabricated by dual-anode electrolytic processing. Applied Surface Science, 375. pp. 162-168.

Abdulwahab, M and Fayomi, O. S. I and Popoola, A. P. I. (2016) Structural evolution, thermomechanical recrystallization andelectrochemical corrosion properties of Ni-Cu-Mg amorphous coatingon mild steel fabricated by dual-anode electrolytic processing. Applied Surface Science. pp. 162-168.

Popoola, A. P. I. and Aigbodion, V.S. and Fayomi, O. S. I (2016) Surface characterization, mechanical properties and corrosion behaviour of ternary based ZneZnOeSiO2composite coating of mild steel. Journal of Alloys and Compounds, 654. pp. 561-566.

Popoola, A. P. I. and Aigbodion, V.S. and Fayomi, O. S. I (2016) Surface characterization, mechanical properties and corrosion behaviour of ternary based ZneZnOeSiO2composite coating of mild steel. Journal of Alloys and Compounds. pp. 561-566.

Popoola, A. P. I. and Aigbodion, V.S. and Fayomi, O. S. I and Abdulwahab, M (2015) Experimental Study of the Effect of Siliconizing Parameters of Thermochemical Treatment of low Carbon Steel. Silicon. ISSN 1876-990X

Fayomi, O. S. I and Abdulwahab, M and Popoola, A. P. I. and Asuke, F. (2015) Corrosion Resistance of AA6063-Type Al-Mg-Si Alloy by Silicon Carbide in Sodium Chloride Solution for Marine Application. J. Marine Sci. Appl., 14. pp. 459-462.

Fayomi, O. S. I and Popoola, A. P. I. and Oheiza, A. and Adekeye, T. (2015) Microstructure, tribological and mechanical strengthening effect of multiphase Zn/ZrO2-SiC electrodeposited composite coatings. Int J Adv Manuf Technol, 80. pp. 1489-1495.

Popoola, A. P. I. and Aigbodion, V.S. and Fayomi, O. S. I (2015) ANTI-CORROSION COATING OF MILD STEEL USING TERNARY Zn-ZnO-Y2O3 ELECTRO-DEPOSITON. Surface & Coatings Technology.

Fayomi, O. S. I and Popoola, A. P. I. (2015) Anti Corrosion Properties and Structural Characteristics of Fabricated Ternary Coatings. Surface Engineering and Applied Electrochemistry, 51 (1). pp. 76-84. ISSN 1068-3755

Fayomi, O. S. I and Popoola, A. P. I. (2015) Anti-Corrosion Properties and Structural Characteristics of Fabricated Ternary Coatings. Surface Engineering and Applied Electrochemistry, 51 (1). pp. 76-84. ISSN 1068-3755

Fayomi, O. S. I and Popoola, A. P. I. (2015) Anti-Corrosion and Tribo-Mechanical Properties of Co-deposited Zn–SnO2 Composite Coating. Acta Metall. Sin. (Engl. Lett.), 28 (4). pp. 521-530.

Fayomi, O. S. I and Popoola, A. P. I. (2015) Chemical interaction, interfacial effect and the microstructural characterization of the induced zinc–aluminum–Solanum tuberosum in chloride solution on mild steel. Res Chem Intermed, 41. pp. 2393-2405.

Fayomi, O. S. I and Popoola, A. P. I. (2015) Chemical interaction, interfacial effect and the microstructural characterization of the induced zinc–aluminum–Solanum tuberosum in chloride solution on mild steel. Res Chem Intermed, 41. pp. 2393-2405.

Loto, C. A. and Fayomi, O. S. I and Loto, R. T. (2015) Corrosion Polarization and K2Cr2O7 Inhibition Behaviour of Martensitic Stainless Steel in H3PO4 and H3PO4 + 3.65% NaCl Environments. Silicon.

Fayomi, O. S. I and Popoola, A. P. I. (2015) Development of smart oxidation and corrosion resistance of multi-doped complex hybrid coatings on mild steel. Journal of Alloys and Compounds. pp. 382-392.

Fayomi, O. S. I and Abdulwahab, M and Yaro, S. A. and Asuke, F. and Inegbenebor, A.O. and Kasim, A. (2015) Effect of Multifunctional Composite Infringement on the Electrochemical Propagation and Characterization of Al-Mg-Si/TiO2-SnO2 Composite by Stir Casting Method. Journal of Advanced Electrochemistry, 1 (1). pp. 9-12.

Fayomi, O. S. I (2015) Effect of composite particulate reinforcement on the morphology, anti-corrosion and hardness properties of fabricated Zn-ZnO coatings. J. Mater. Environ. Sci., 6. pp. 963-968. ISSN 2028-2508

Fayomi, O. S. I and Popoola, A. P. I. (2015) Electrochemical Oxidation Assessment and Interaction of 2-aminoethanol and N, N-diethylethanamine Propagation in Acidic Medium. Protection of Metals and Physical Chemistry of Surfaces, 51 (5). pp. 891-898. ISSN 2070-2051

Loto, C. A. and Fayomi, O. S. I and Loto, R. T. (2015) Electrochemical corrosion resistance and inhibition behaviour of martensitic stainless steel in hydrochloric acid. Der Pharma Chemica, 7 (10). pp. 102-111. ISSN 0975-413X

Loto, C. A. and Fayomi, O. S. I and Loto, R. T. and Popoola, A. P. I. (2015) Electrochemical corrosion resistance and susceptibility of 12Cr martensitic stainless steel in H2SO4. Journal of Chemical and Pharmaceutical Research, 7 (10). pp. 39-48. ISSN 0975-7384

Asuke, F. and Abdulwahab, M and Fayomi, O. S. I and Aigbodion, V.S. and Popoola, A. P. I. (2015) Inhibitive Action of Potassium Iodide on the Corrosion of Stir-Cast Al–Si/SiC in NaCl-KI Interface. J Fail. Anal. and Preven, 15. pp. 822-827.

Fayomi, O. S. I and Tau, V. R. and Popoola, A. P. I. and Abdulwahab, M (2015) Interfacial investigation and strengthening behaviour of Zn–Ni multifacial TEA/MEA thin films induced by electrodeposition. Appl. Phys. A, 121. pp. 749-755.

Fayomi, O. S. I and Popoola, A. P. I. (2015) An Investigation of Composite Inclusion Corrosion Resistance Behavior of Thermally Liquid-Melt Inoculated Al-Mg-Si Alloy in Sodium Chloride Medium. Silicon, 7. pp. 49-53.

Fayomi, O. S. I and Popoola, A. P. I. and Aigbodion, V.S. (2015) Investigation on microstructural, anti-corrosion and mechanical properties of doped Zn–Al–SnO2 metal matrix composite coating on mild steel. Journal of Alloys and Compounds, 623. pp. 328-334.

Fayomi, O. S. I and Popoola, A. P. I. and Aigbodion, V.S. (2015) Investigation on microstructural, anti-corrosion and mechanical properties of doped Zn–Al–SnO2 metal matrix composite coating on mild steel. Journal of Alloys and Compounds. pp. 328-334.

Fayomi, O. S. I and Joseph, O. O and Mubiayi, M.P. and Durodola, B. M. (2015) Microstructural evolution and characterization of super-induced MgO composite on zinc-rich coatings. egyptian journal of b a s i c and a p p l i e d s c i e n c e s. ISSN 0747-5632 (In Press)

Fayomi, O. S. I and Aigbodion, V.S. and Popoola, A. P. I. (2015) Properties of Tic/Tib Modified Zn–Tic/Tib Ceramic Composite Coating on Mild Steel. J Fail. Anal. and Preven.. pp. 54-64.

Popoola, A. P. I. and Fayomi, O. S. I and Aigbodion, V.S. and Abdulwahab, M (2015) Surface modification, strengthening effect and electrochemical comparative study of Zn-Al2O3-CeO3 and Zn-TiO2-CeO3 coating on mild steel. Int J Adv Manuf Technol.

Fayomi, O. S. I and Popoola, A. P. I. and Loto, C. A. (2015) The effect of particulate strengthening on microstructure and mechanical characterization of binary-modified composites on mild steel. Journal of Composite Materials, 49 (21). pp. 2625-2637.

Fayomi, O. S. I and Popoola, A. P. I. and Inegbenebor, A.O. (2014) Multiple loading and mechanical response of Al6O13Si2–ZrO2/Zn composite coating. ScienceDirect. pp. 79-80.

Fayomi, O. S. I and Popoola, A. P. I. (2014) The Inhibitory Effect and Adsorption Mechanism of Roasted Elaeis guineensis as Green Inhibitor on the Corrosion Processof Extruded AA6063 Al-Mg-Si Alloy in Simulated Solution. Silicon, 6 (2). ISSN 1876-990X

Abdulwahab, M and Fayomi, O. S. I and Popoola, A. P. I. and Asuke, F. and Umoru, L. E. (2014) Effect of Avogadro natural oil on the corrosion inhibition of mild steel in hydrochloric acid solution. Research on Chemical Intermediates, 40 (3). pp. 1115-1123.

Fayomi, O. S. I and Abdulwahab, M and Popoola, A. P. I. (2014) Potentials of Elaeis guineensis and pinus sylvestris as binders on foundry core strength. Journal of Scientific & Industrial Research, 73. pp. 173-176.

Fayomi, O. S. I and Loto, C. A. and Popoola, A. P. I. and Tau, V. R. (2014) Effect of Process Parameter on the in-situ Intermetallic Composite Coating and Microstructural Evolution of Zn-Al2O3 in the Presence of TEA/MEA on Mild Steel. International Journal of ELECTROCHEMICAL SCIENCE, 9. 7359 - 7368.

Asuke, F. and Abdulwahab, M and Aigbodion, V.S. and Fayomi, O. S. I and Aponbiede, O. (2014) Effect of load on the wear behaviour of polypropylene/carbonized bone ash particulate composite. egy p t i a n j o u rnal of b a s i c and ap p l i ed s c i e n c es. pp. 67-70.

Fayomi, O. S. I and Popoola, A. P. I. and Aigbodion, V.S. (2014) Effect of thermal treatment on the interfacial reaction, microstructural and mechanical properties of Zn–Al–SnO2/TiO2 functional coating alloys. Journal of Alloys and Compounds. pp. 455-463.

Fayomi, O. S. I and Popoola, A. P. I. and Popoola , M.O. (2014) INHIBITIVE ACTION AND SYNERGISTIC PERFORMANCE OF 2-AMINOETHANOL AND N,N-DIETHYLETHANAMINE ON COPPER IN HYDROCHLORIC ACID SOLUTION. Bull. Chem. Soc. Ethiop, 28 (5). pp. 457-467.

Fayomi, O. S. I and Popoola, A. P. I. (2014) In-situ formation characteristic, tribological characterization and anti-corrosion properties of quaternary composites films. Transactions of Nonferrous Metals Society of China, 24. pp. 3170-3180.

Fayomi, O. S. I and Popoola, A. P. I. and Popoola, O. M. (2014) Inhibitive action and synergistic performance of 2-aminoethanol and N,Ndiethyl-ethanamine on copper in hydrochloric acid solution. Bulletin of the Chemical Society of Ethiopia, 28 (3). pp. 457-467.

Fayomi, O. S. I and Popoola, A. P. I. (2014) The Inhibitory Effect and AdsorptionMechanism of Roasted Elaeis guineensis as Green Inhibitor on the Corrosion Process of Extruded AA6063 Al-Mg-Si Alloy in Simulated Solution. Silicon, 6. pp. 137-143.

Fadayomi, Theophilus and Fayomi, O. S. I and Adejumo, G.O. (2014) Issues of South-South Migration: A Case Study of Nigerian Diasporas in Ghana. Developing Country Studies, 4 (10). pp. 167-175. ISSN 2224-607X (Paper) ISSN 2225-0565 (Online)

Fayomi, O. S. I and Popoola, A. P. I. (2014) Study of Al2O3/SiC particle loading on the microstructural strengthening characteristics of ZneAl2O3eSiC matrix composite coating. e g y p t i a n j o u r n a l of b a s i c and ap p l i e d s c i e nces, 1. pp. 120-125.

Fayomi, O. S. I and Popoola, A. P. I. (2014) Study of Al2O3/SiC particle loading on the microstructural strengthening characteristics of ZneAl2O3eSiC matrix composite coating. egyptian journal of basic and applied sciences, 1. pp. 120-125.

Fayomi, O. S. I and Popoola, A. P. I. and Loto, C. A. (2014) Tribo-Mechanical Investigation and Anti-Corrosion Properties of Zn-TiO2 Thin Film Composite Coatings from Electrolytic Chloride Bath. International Journal of ELECTROCHEMICAL SCIENCE, 9. pp. 3885-3903.

Fayomi, O. S. I and Abdulwahab, M and Durodola, B. M. and Popoola, A. P. I. and Joshua, T.O and Alao, A.O. and Joseph, O. O and Inegbenebor, A.O. (2013) STUDY OF THE ELECTROCHEMICAL BEHAVIOR AND SURFACE INTERACTION OF AA6063 TYPE AL-MG-SI ALLOY BY SODIUM MOLYBDATE IN SIMULATED SEA WATER ENVIRONMENT. International Journal of Management, Information Technology and Engineering, 1 (3). pp. 159-166.

Fayomi, O. S. I and Abdulwahab, M and Popoola, A. P. I. (2013) PROPERTIES EVALUATION OF TERNARY SURFACTANT-INDUCED Zn-Ni- Al2O3 FILMS ON MILD STEEL BY ELECTROLYTIC CHEMICAL DEPOSITION. Journal of Ovonic Research, 9 (5). 123 -132.

Fayomi, O. S. I and Popoola, A. P. I. (2013) Assessing the inhibitory potential of natural silicon oil on brass degradation in 1M H2SO4. Research Journal of Chemistry and Environment, 17 (10). pp. 94-100.

Fayomi, O. S. I and Popoola, A. P. I. (2013) Comparative Evaluation of Chemical Deposition Parameters of an Induced Zn/Al-Zn and their Interfacial Characteristic Trend on Mild Steel. International Journal of ELECTROCHEMICAL SCIENCE, 8. 11502- 11511.

Abdulwahab, M and Kasim, A. and Yaro, S. A. and Fayomi, O. S. I and Umaru, O. B. (2013) Effect of Avogadro Oil as Corrosion Inhibitor of Thermally Pre-aged Al-Si-Mg Alloy in Sodium Chloride Solution. Silicon, 5. pp. 225-228.

Abdulwahab, M and Madugu, I. A. and Asuke, F. and Fayomi, O. S. I and Ayeni, Folusho (2013) Effect of thermal ageing treatment on the mechanical properties of antimony-modified A356.0-type Al-Si-Mg alloy. J. Mater. Environ Sci., 4 (1). pp. 86-92. ISSN 2028-2508

Gbenebor, O. P and Fayomi, O. S. I and Popoola, A. P. I. and Inegbenebor, A.O. and Oyawale, Fetus A (2013) Extrusion die geometry effects on the energy absorbing properties and deformation response of 6063-type Al-Mg-Si alu1ninum alloy*. Results In Physics, 3. pp. 1-6.

Gbenebor, O. P and Fayomi, O. S. I and Popoola, A. P. I. and Inegbenebor, A.O. and Oyawale, Fetus A (2013) Extrusion die geometry effects on the energy absorbing properties and deformation response of 6063-type Al–Mg–Si aluminum alloy. Results in Physics, 3. pp. 1-6.

Gbenebor, O. P and Fayomi, O. S. I and Popoola, A. P. I. and Inegbenebor, A.O. and Oyawale, Fetus A (2013) Extrusion die geometry effects on the energy absorbing properties and deformation response of 6063-type Al–Mg–Si aluminum alloy. Results in Physics, 3. pp. 1-6.

Fayomi, O. S. I and Gbenebor, O. P and Abdulwahab, M and Bolu, Christian and Popoola, A. P. I. (2013) Structural Modification, Strengthening Mechanism and Electrochemical Assessment of the Enhanced Conditioned AA6063-type Al-Mg-Si Alloy. Journal of New Materials for Electrochemical Systems 16.

Joseph, O. O and Ajayi, J.A. and Ajayi, O. O. and Fayomi, O. S. I and Joseph, O. O and Gbenebor, O. P (2012) MATERIAL PERFORMANCE INVESTIGATION ON THE FAILURE OF AN AIRCRAFT (ABT-18) NOSE WHEEL STRUT. International Journal of Industrial Engineering & Technology (IJIET), 2 (3). pp. 1-6.

Fayomi, O. S. I and Gbenebor, O. P and Abdulwahab, M and Popoola, A. P. I. (2012) Performance Evaluation of some steels as extrusion die on AA6063-type Al-Mg-Si alloy. Indian Journal of Engineering and Materials Sciences, 19. pp. 403-410.

Popoola, A. P. I. and Fayomi, O. S. I and Popoola , M.O. (2012) Electrochemical and Mechanical Properties of Mild Steel Electro-plated with Zn-Al. International Journal of ELECTROCHEMICAL SCIENCE, 7. 4898 - 4917.

Gbenebor, O. P and Abdulwahab, M and Fayomi, O. S. I and Popoola, A. P. I. (2012) INFLUENCE OF INOCULANT ADDITION AND COOLING MEDIUM ON THE MECHANICAL PROPERTIES OF AA 6063-TYPE Al-Mg-Si ALLOY. Chalcogenide Letters, 9 (5). pp. 201-211.

Loto, C. A. and Popoola, A. P. I. and Fayomi, O. S. I and Loto, R. T. (2012) Corrosion Polarization Behaviour of Type 316 Stainless Steel in Strong Acids and Acid Chlorides. International Journal of Electrochemical Science, 7. pp. 3787-3797. ISSN 10748 - 10762

Gbenebor, O. P and Adeosun, S.O. and Fayomi, O. S. I and Joseph, O. O (2012) The influence of steel die parameter and micro-structural investigation on AA6063 aluminum alloy. International Journal of Scientific & Engineering Research, Volume, 3 (3). pp. 1-9. ISSN 2229-5518

Popoola, A. P. I. and Fayomi, O. S. I and Popoola , M.O. (2012) Comparative Studies of Microstructural, Tribological and Corrosion Properties of Plated Zn and Zn-alloy Coatings. International Journal of ELECTROCHEMICAL SCIENCE, 7. 4860 - 4870.

Popoola, A. P. I. and Abdulwahab, M and Fayomi, O. S. I (2012) Corrosion Inhibition of Mild Steel in Sesamum indicum -2M HCl/H2SO4 Interface. International Journal of ELECTROCHEMICAL SCIENCE, 7. 5805- 5816.

Popoola, A. P. I. and Fayomi, O. S. I and Abdulwahab, M (2012) Degradation Behaviour of Aluminium in 2M HCl/HNO3 in the Presence of Arachis hypogeae Natural Oil. International Journal of ELECTROCHEMICAL SCIENCE, 7. 5817 - 5827.

Omotosho, O. A. and Ajayi, O. O. and Fayomi, O. S. I and Yussuff, O.O. (2012) Degradation Evaluation of Zinc m 2 M Hydrochloric Acid m the Presence of Bambusa bambos. Singapore Journal of Scientific Research, 2 (1). pp. 14-24. ISSN 2010-006x

Asuke, F. and Aigbodion, V.S. and Abdulwahab, M and Fayomi, O. S. I and Popoola, A. P. I. and Nwoyin, C.I. and Garba, B. (2012) Effects of bone particle on the properties and microstructure of polypropylene/bone ash particulate composites. Results in Physics, 2. pp. 135-141.

Abdulwahab, M and Popoola, A. P. I. and Fayomi, O. S. I (2012) Inhibitive Effect by Ricinus communis on the HCl/H3PO4 Acid Corrosion of Aluminium Alloy. International Journal of ELECTROCHEMICAL SCIENCE, 7. 11706 - 11717.

Abdulwahab, M and Kasim, A. and Fayomi, O. S. I and Asuke, F. and Popoola, A. P. I. (2012) Inhibitive effect of Arachis hypogeae on the corrosion of mild steel in sulphuric acid solution. J. Mater. Environ. Sci., 3 (6). pp. 1177-1182. ISSN 2028-2508

Fayomi, O. S. I and Popoola, A. P. I. (2012) An Investigation of the Properties of Zn Coated Mild Steel. International Journal of ELECTROCHEMICAL SCIENCE, 7. 6555- 6570.

Fayomi, O. S. I and Gbenebor, O. P and Abdulwahab, M and Popoola, A. P. I. (2012) Performance evaluation of some steels as extrusion die on AA6063-type Ai-Mg-Sialloy. Indian Journal of Engineering & Materials Sciences, 19. pp. 403-410.

Popoola, A. P. I. and Abdulwahab, M and Fayomi, O. S. I (2012) Synergetic performance of palm oil (Elaeis guineensis) and pine oil (Pinus sylvestris) as binders on foundry core strength. International Journal of the Physical Sciences, 7 (24). pp. 3062-3066. ISSN 1992 - 1950

Popoola, A. P. I. and Fayomi, O. S. I (2011) Environmental Failure of 2M Acid Strength on Zinc Electroplated Mild Steel in the Presence of Nicotioana Tobacum. International Journal of ELECTROCHEMICAL SCIENCE, 6. 4798 -4810.

Popoola, A. P. I. and Fayomi, O. S. I (2011) Performance Evaluation of Zinc Deposited Mild Steel in Chloride Medium. International Journal of ELECTROCHEMICAL SCIENCE, 6. 3254 - 3263.

Popoola, A. P. I. and Fayomi, O. S. I (2011) Environmental failure of 2 M acid strength on zinc electroplated mild steel in the presence of Nicotiana Tobacum. Scientific Research and Essays, 6 (14). pp. 3079-3088. ISSN 1992-2248

Popoola, A. P. I. and Fayomi, O. S. I (2011) ZnO as corrosion inhibitor for dissolution of zinc electrodeposited mild steel in varying HCl concentration. International Journal of the Physical Sciences, 6 (10). pp. 2447-2454. ISSN 1992 - 1950

Fayomi, O. S. I and Ojo, O. I. and Popoola, A. P. I. (2011) Investigating (Ochadamu) silica sand, clay and local oils for foundry core. International Journal of the Physical Sciences, 6 (8). pp. 1894-1904. ISSN 1992 - 1950

Fayomi, O. S. I and Ajayi, O. O. and Popoola, A. P. I. (2011) Suitability of local binder compositional variation on silica sand for foundry core-making. International Journal of the Physical Sciences , 6 (8). pp. 1940-1946. ISSN ISSN 1992 - 1950

Omotosho, Olugbenga Adeshola and Ajayi, O. O. and Fayomi, O. S. I and Ifepe, V. O. (2011) Assessing the deterioration behaviour of mild steel in 2 M sulphuric acid using Bambusa glauscescens. INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, DINDIGUL, 2 (2). pp. 406-418. ISSN 0976-4259

Popoola, A. P. I. and Fayomi, O. S. I (2011) Effect of some process variables on zinc coated low carbon steel substrates. Scientific Research and Essays, 6 (20). pp. 4264-4272. ISSN 1992-2248 ©2011

Popoola, A. P. I. and Fayomi, O. S. I (2011) Electrochemical Study of Zinc Plate in Acid Medium: Inhibitory Effect of Bitter Leaf (Vernonia Amygdalina). International Journal of ELECTROCHEMICAL SCIENCE, 6. pp. 4581-4592.

Loto, C. A. and Fayomi, O. S. I and Ajayi, O. O. and Tau, V. R. and Popoola, A. P. I. and Durodola, B. M. (2011) Influence of Plating Parameter and Surface Morphology on Mild Steel. Journal of Materials and Environmental Science, 2. pp. 271-280. ISSN 2028-2508

Durodola, B. M. and OLUGBUYIRO, J.A.O and Moshood, S.A. and Fayomi, O. S. I and Popoola, A. P. I. (2011) Study of Influence of Zinc Plated Mild Steel Deterioration in Seawater Environment. International Journal of ELECTROCHEMICAL SCIENCE, 6. 5605 - 5616.

Udoye, Nduka Ekene and ASIKOKO, F.C and Fayomi, O. S. I and Okeniyi, Joshua Olusegun (2006) Mechanical Characterization of AA6061/Clay (Kaolinite) Composites for Industrial Application. Advances in Machinery, Materials Science and Engineering Application IX (26). pp. 18-26.

Udoye, Nduka Ekene and ASIKOKO, F.C and Fayomi, O. S. I and Okeniyi, Joshua Olusegun (2006) Mechanical Characterization of AA6061/Clay (Kaolinite) Composites for Industrial Application. Mechanical Characterization of AA6061/Clay (Kaolinite) Composites for Industrial Application N. E. UD (26). pp. 18-26. ISSN 10.3233/ATDE230436

Ayoola, A. A. and Obanla, O. R. and Abatan, Olubunmi G. and Fayomi, O. S. I and AKANDE, I.G and Agboola, Oluranti and Ayeni, .A. O. and Oyekunle, D. T. UNSPECIFIED

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Joseph, O. O and Akinlabi, Esther T. and Babalola, P.O. and Udoye, Nduka Ekene and Ajayi, O. O. UNSPECIFIED

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Joseph, O. O and Akinlabi, Esther T. and Babalola, P.O. and Udoye, Nduka Ekene and Ajayi, O. O. and Aworinde, Abraham K. and Banjo, SolomonO. UNSPECIFIED

Ayoola, A. A. and Obanla, O. R. and Abatan, Olubunmi G. and Fayomi, O. S. I and AKANDE, I.G and Agboola, Oluranti and Ayeni, .A. O. and Oyekunle, D. T. UNSPECIFIED

Ayoola, Ayodeji Ayodele and Obanla, Oyinlola Rukayat and Abatan, Olubunmi G. and Fayomi, O. S. I and AKANDE, I.G and Agboola, Oluranti and Ayeni, .A. O. and Oyekunle, D. T. UNSPECIFIED

Ayoola, A. A. and Obanla, O. R. and Abatan, Olubunmi G. and Fayomi, O. S. I and AKANDE, I.G and Agboola, Oluranti and Ayeni, .A. O. and Oyekunle, D. T. UNSPECIFIED

Ayoola, A. A. and Obanla, O. R. and Abatan, Olubunmi G. and Fayomi, O. S. I and AKANDE, I.G and Agboola, Oluranti and Ayeni, .A. O. and Oyekunle, D. T. UNSPECIFIED

Book Section

Oyedepo, Sunday Olayinka and Dirisu, J. O. and Udoye, Nduka Ekene and Fayomi, O. S. I (2023) Progresses on Green and Smart Materials for Multifaceted Applications. In: Handbook of Smart Materials, Technologies, and Devices. Springer Nature Switzerland. ISBN ISBN978-3-030-84204-8  Online ISBN978-3-030-84205-5

Udoye, Nduka Ekene and Fayomi, O. S. I and Inegbenebor, A.O. (2022) The Essence of Intermetallic Phases in AA6061/Clay Composites. In: Advanced Manufacturing in Biological, Petroleum, and Nanotechnology Processing. Springer Nature, pp. 85-97. ISBN ISBN978-3-030-95819-0  Online ISBN978-3-030-95820-6

Udoye, Nduka Ekene and Fayomi, O. S. I and Inegbenebor, A.O. (2022) The Essence of Intermetallic Phases in AA6061/Clay Composites. In: Advanced Manufacturing in Biological, Petroleum, and Nanotechnology Processing. Springer Nature Switzerland, pp. 85-97. ISBN ISBN978-3-030-95819-0  Online ISBN978-3-030-95820-6

Agboola, Oluranti and Ayeni, .A. O. and Fayomi, O. S. I and Oladokun, Olagoke and Ayoola, A. A. and Babatunde, Damilola Elizabeth and Efeovbokhan, Vincent Enon and Odunlami, O. A. and Adeniyi, A. and Sadiku, Rotimi Emmanuel (2022) A Short Overview on the Role of Nanotechnology in Different Sectors of Energy System. In: Advanced Manufacturing in Biological, Petroleum, and Nanotechnology Processing. Springer, pp. 99-115. ISBN 978-3-030-95819-0

Agboola, Oluranti and Popoola, Patricia A. P. and Sadiku, Rotimi Emmanuel and Sanni, Samuel Eshorame and Babatunde, Damilola Elizabeth and Abatan, Olubunmi G. and Fayomi, O. S. I and Fasiku, V. O. (2019) Polymer Nanocomposites for Advanced Automobile Applications. In: Polymer Nanocomposites for Advanced Engineering and Military Applications. Polymer Nanocomposites for Advanced Engineering and Military Applications.

Fayomi, O. S. I and Anawe, Paul Apeye Lucky and Daniyan, A. A. (2018) The Impact of Drugs as Corrosion Inhibitors on Aluminum Alloy in Coastal-Acidified Medium. In: Corrosion Inhibitors, Principles and Recent Applications. INTECH.

Fayomi, O. S. I and Popoola, A. P. I. and Udoye, Nduka Ekene (2017) Effect of Alloying Element on the Integrity and Functionality of Aluminium-Based Alloy. In: Aluminium Alloys – Recent Trends in Processing, Characterization, Mechanical behavior and Applications. INTECH.

Abioye, Abiodun A. and Fayomi, O. S. I and Popoola, A. P. I. and Abioye, Abiodun A. (2017) Equal Channel Angular Extrusion Characteristics on Mechanical Behavior of Aluminum Alloy. In: Aluminium Alloys - Recent Trends in Processing, Characterization, Mechanical Behavior and Applications. INTECH, pp. 263-277.

Abioye, Abiodun A. and Fayomi, O. S. I and Popoola, A. P. I. and Abioye, Oluwabunmi P. (2017) Equal Channel Angular Extrusion Characteristics on Mechanical Behavior of Aluminum Alloy. In: Aluminium Alloys – Recent Trends in Processing, CharaAluminium Alloys – Recent Trends in Processing, Characterization, Mechanical behavior and Applicationscterization, Mechanical behavior and Applications. INTECH.

Fayomi, O. S. I and Popoola, A. P. I. and Loto, C. A. (2016) The Study of the Microstructure and Interfacial Reaction of Binary Composite Coating. In: Crystallizing Ideas – The Role of Chemistry. Springer International Publishing Switzerland. ISBN 978-3-319-31758-8

Fayomi, O. S. I and Popoola, A. P. I. and Loto, C. A. (2014) Morphological and Electrochemical Interactions of Admixed Zn-SnO2 Composites Electro-Deposited on Mild Stee. In: Processing and Properties of Advanced Ceramics and Composites VI: Ceramic Transactions. 1999-2017 John Wiley & Sons.

Popoola, A. P. I. and Malatji, N. and Fayomi, O. S. I Fabrication and Properties of Zinc Composite Coatings for Mitigation of Corrosion in Coastal and Marine Zone. In: Applied Studies of Coastal and Marine Environments. InTechOpen.

Conference or Workshop Item

Udoye, Nduka Ekene and Inegbenebor, A.O. and Fayomi, O. S. I (2023) The functionality of intermetallic phases in the reinforcement of AA6061 aluminium alloy. In: AIP Conference Proceedings, 9–11 May 2022, Metz, Grand-Est, France.

Samuel, O.D. and Fayomi, O. S. I and Olusanyan, D. and Agboola, O. and Udoye, Nduka Ekene and Oluwasegun, K.M (2022) Advancement in engineering materials and the growing concern. In: TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY: TMREES21Gr, 28–30 May 2021, Athens, Greece.

Dunmade, I.S. and Babalola, P.O. and Fayomi, O. S. I (2022) Bioeconomy, digital economy, sharing economy, industry 4.0, and other new concepts: A look at how the pieces fit together. In: TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY, 28–30 May 2021, Athens, Greece.

Udoye, Nduka Ekene and Fayomi, O. S. I and Inegbenebor, A.O. and Okolie, T. A. Sociis and Dirisu, J. O. and Jen, T. C. (2022) Corrosion impact of AA6061/clay composite for industrial application. In: TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY: TMREES21Gr, 28–30 May 2021, Athens, Greece.

Udoye, Nduka Ekene and Adeniyi, P. A. and Fayomi, O. S. I and Inegbenebor, A.O. and Elewa, Remilekun R. and Sojobi, J. W. (2022) Production and characterization of AA6061/clay silicon nanocomposite for industrial application. In: AIP Conference Proceedings, 28–30 May 2021, Athens, Greece.

Agboola, Oluranti and Fayomi, O. S. I and Ayoola, A. A. and Ayeni, .A. O. and Alagbe, Edith Egbimhanlu. and Sadiku, Rotimi Emmanuel and Popoola, A. P. I. (2022) Short review on the prospect of laser cladding for aluminum based alloys composite for automotive industries. In: APL Materials, 28–30 May 2021, Athens, Greece.

Nduma, R.C. and Fayomi, O. S. I and David, O. D. and Joseph, O. O and Udoye, Nduka Ekene and Oyebanji, J.A. and Sojobi, J. W. and Daramola, D.O. and Ogunsanya, A O (2022) The simplicity of electrochemical degradation of materials and its susceptibility. In: AIP Conference Proceedings. (Submitted)

Dirisu, J. O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Udoye, Nduka Ekene (2021) Asbestos-Free Aluminium Dross Brake Pad: A Mini Review. In: International Conference on Engineering for Sustainable World, 2020, Online.

Dirisu, J. O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Udoye, Nduka Ekene (2021) Asbestos-Free Aluminium Dross Brake Pad: A Mini Review. In: International Conference on Engineering for Sustainable World, 2021, Online.

Nduma, R.C. and Fayomi, O. S. I and Udoye, Nduka Ekene (2021) Assessing the potential of inhibitors and essential drugs toward corrosion preventive measure. In: International Conference on Engineering for Sustainable World, 2021, Online.

Joshua, T.O and Fayomi, O. S. I and Seriki, E. O. and Udoye, Nduka Ekene (2021) Comparative Effect of Some Carbon Rich Materials on the Hardness Property of Carburized Low Alloy Carbon Steel. In: International Conference on Engineering for Sustainable World, 2021, Online.

Udoye, Nduka Ekene and Okolie, T. A. Sociis and Fayomi, O. S. I and Banjo, SolomonO. (2021) Computational analysis of conductive heat transfer in a rectangular slab of stable boundary using Monte Carlo method. In: ICSID 2020, 2021, Online.

Udoye, Nduka Ekene and Nnamba, O. J. and Fayomi, O. S. I and Inegbenebor, A.O. (2021) Corrosion Performance of AA6061/Rice Husk Ash Composite for Engineering Application. In: International Conference on Engineering for Sustainable World, 2019, Online.

Kilanko, O. O and Leramo, R.O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Babalola, P.O. and Ilori, T. A and Mozea, K.P. and Patrick, P.N. (2021) Design and construction of a manual food grinder. In: International Conference on Engineering for Sustainable World, 2021, Online.

Banjo, SolomonO. and Fayomi, O. S. I and Atayero, A. A. and Bolaji, Bukola O. and Dirisu, Joy Favour and Okeniyi, Joshua Olusegun and Emetere, Moses and Olorunfemi, B. J. and Owoeye, T. (2021) Effect of Fins spacing on the Performance Evaluation of a Refrigeration System using LPG as Refrigerant. In: International Conference on Energy and Sustainable Environment, 2021, Online.

Elewa, Remilekun R. and Araoyinbo, A. O. and Fayomi, O. S. I and Samuel, A.U. and Biodun, Biola Mathew and Udoye, Nduka Ekene (2021) Effect of Machining On Stainless Steel: A Review. In: International Conference on Engineering for Sustainable World, 2021, Online.

Akpoborie, J. and Fayomi, O. S. I and Inegbenebor, A.O. and Ayoola, A. A. and Dunlami, O. and Samuel, O.D. and Agboola, Oluranti (2021) Electrochemical reaction of corrosion and its negative economic impact. In: IOP Conference Series: Materials Science and Engineering.

Banjo, SolomonO. and Ajayi, O. O. and Bolaji, Bukola O. and Emetere, Moses and Fayomi, O. S. I and Udoye, Nduka Ekene and Olatunde, A.O. and Akinlabu, K. (2021) Evaluation analysis of a developed solar refrigerator using conventional refrigerant for rural and medical applications. In: International Conference on Energy and Sustainable Environment, 2021, Online.

Joshua, T.O and Fayomi, O. S. I and Seriki, E. O. and Udoye, Nduka Ekene (2021) Evaluation of Microstructural and structural characterization of rolled medium carbon steel quenched in different media. In: International Conference on Engineering for Sustainable World, 2021, Online.

Banjo, SolomonO. and Joseph, O. O and Fayomi, O. S. I and Udor, M. and Dirisu, Joy Favour and Omole, D. O. and Afolalu, Sunday A. and osagie, I. (2021) Evaluation of a constructed manual drilling machine for small scale operation. In: International Conference on Engineering for Sustainable World, 2021, Online.

Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Dirisu, J. O. and Efemwenkiekiea, U. K. and Arhagba, A. (2021) Experimental Analysis of Evaporative Cooling Water in Porous Clay Vessels Under Varying Ambient Conditions. In: International Conference on Engineering for Sustainable World, 2020, Online.

Dirisu, J. O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Oyekunle, J. A. O. and Asere, A.A. and Udoye, Nduka Ekene (2021) Flame Behaviour Comparison of Building Ceiling Composite using Combustion Calorimeter. In: International Conference on Engineering for Sustainable World, 2021, Online.

Dirisu, J. O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Oyekunle, J. A. O. and Asere, A.A. and Udoye, Nduka Ekene (2021) Flame Behaviour Comparison of Building Ceiling Composite using Combustion Calorimeter. In: International Conference on Engineering for Sustainable World, 2021, Online.

Oyedepo, Sunday Olayinka and Oyebanji, J.A. and Ukponu, S. N. and Kilanko, O. O and Babalola, P.O. and Fayomi, O. S. I and Dirisu, J. O. and Olawole, C. Olukunle and Leramo, R.O. and Dunmade, I.S. and Efemwenkiekie, K. U. and Shopeju, O. O. (2021) Generation of Typical Meteorological Year Data for a City in South- Western Nigeria. In: International Conference on Engineering for Sustainable World, 2021, Online.

Fayomi, O. S. I and Olusanyan, D. and Loto, C. A. and Udoye, Nduka Ekene (2021) Insight on the Electrodeposition Technology and Parameter for Corrosion Control of Structural Steel. In: ICSID 2020, 2021, Online.

Fayomi, O. S. I and Banjo, SolomonO. and Agboola, O. and Oyebanji, J.A. and Udoye, Nduka Ekene (2021) Pillars of Effective and Efficient Energy Systems in Nigeria. In: International Conference on Energy and Sustainable Environment, 2021, Online.

Biodun, Biola Mathew and Fayomi, O. S. I and Okeniyi, Joshua Olusegun (2021) The Possibility of Biogas production in Nigeria from Organic Waste Material: A Review. In: International Conference on Engineering for Sustainable World (ICESW 2020), 2021, Online.

Ugwu, S. C. and Inegbenebor, A.O. and Fayomi, O. S. I and Udoye, Nduka Ekene (2021) Preparation of Carbon Brushes from Agro-Waste Materials Palm Kernels Shells for Automobile Industry. In: International Conference on Engineering for Sustainable World, Ota, Nigeria.

Oyedepo, Sunday Olayinka and Dirisu, J. O. and Udoye, Nduka Ekene and Fayomi, O. S. I (2021) Progresses on Green and Smart Materials for Multifaceted Applications. In: Handbook of Smart Materials, Technologies, and Devices, 2021, Online.

Fayomi, O. S. I and Agboola, O. and Oyedepo, Sunday Olayinka and Ngene, Ben U. and Udoye, Nduka Ekene (2021) A Review of Energy Consumption in Foundry Industry. In: International Conference on Energy and Sustainable Environment, 2021, Online.

Fayomi, O. S. I and Adedeji, Adeola A. and Agboola, O. and Ajala, M.O. and Bolu, Christian and Banjo, SolomonO. and Udoye, Nduka Ekene (2021) Role of Biomaterials in Automation. In: International Conference on Energy and Sustainable Environment, 2021, Online.

Emmanuel, O. A. and Fayomi, O. S. I and Agboola, Oluranti and Ayoola, A. A. and Oloke, C. Olayinka and Amusan, L. M. (2021) Short review on nanocomposite coating advances in the industry. In: International Conference on Engineering for Sustainable World, 2021, Online.

Fayomi, G.U. and Mini, S. E. and Chisom, C M. and Fayomi, O. S. I and Udoye, Nduka Ekene and Agboola, O. and Omole, D. O. (2021) Smart Waste Management for Smart City: Impact on Industrialization. In: 4th International Conference on Science and Sustainable Development, 2021, Online.

Oloke, C. Olayinka and Ezema, I. C. and Fayomi, O. S. I and Emetere, Moses and Omeje, Maxwell and Jesusegun, D. (2021) A comparative study of rental value of residential properties at border communities of Lagos and Ogun States, Nigeria. In: International Conference on Energy and Sustainable Environment, 2021, Online.

Oloke, C. Olayinka and Fayomi, O. S. I and Oluwatayo, A. A. and Adagunodo, T. A. and Akinwumi, I. I. (2021) The nexus of climate change, urban infrastructure and sustainable development in developing countries. In: International Conference on Energy and Sustainable Environment, 2021, Online.

Oloke, C. Olayinka and Fayomi, O. S. I and Oluwatayo, A. A. and Adagunodo, T. A. and Akinwumi, I. I. (2021) The nexus of climate change, urban infrastructure and sustainable development in developing countries. In: International Conference on Energy and Sustainable Environment, 2021, Online.

Udoye, Nduka Ekene and Fayomi, O. S. I and Inegbenebor, A.O. (2021) A review on the mechanical strength of aluminium - clay composites. In: ICSID 2020, 2021, Online.

Kilanko, O. O and Leramo, R.O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Babalola, P.O. and Ilori, T. A and Mozea, K.P. and Patrick, P.N. (2020) Design and construction of a manual food grinder. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Banjo, SolomonO. and Babalola, P.O. and osagie, I. and Joseph, O. O and Williams, Akan B. and Fayomi, O. S. I and Bolu, Christian and Afolalu, Sunday A. (2020) Design and development of a table-mounted manual drilling machine for the rural purpose. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

OLAOLUWAYINKA, O. and Inegbenebor, A.O. and Fayomi, O. S. I and Udoye, Nduka Ekene and Babalola, P.O. (2020) Development of Heat sink from Aluminium Silicon Carbide for Electrical and Electronic Applications. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Kilanko, O. O and Fayomi, O. S. I and AKANDE, I.G and Shopeju, O. O. and Popoola, A. P. I. (2020) Examining the impact of quality failure in a controlled environment. In: AIP Conference Proceedings, 2020, Online.

Oyedepo, Sunday Olayinka and Oyebanji, J.A. and Ukponu, S. N. and Kilanko, O. O and Babalola, P.O. and Fayomi, O. S. I and Dirisu, Joy Favour and Olawole, C. Olukunle and Leramo, R.O. and Dunmade, I.S. and Efemwenkiekie, K. U. and Shopeju, O. O. (2020) Generation of Typical Meteorological Year Data for a City in South-Western Nigeria. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Fayomi, G.U. and Mini, S. E. and Fayomi, O. S. I and Owodolu, T. and Ayoola, A. A. and Wusu, O. (2020) A Mini Review on the Impact of Sewage Disposal on Environment and Ecosystem. In: International Conference on Energy and Sustainable Environment, 2019, Online.

Ajayi-Majebi, J and Abioye, Oluwabunmi P. and Fayomi, O. S. I and Inegbenebor, A.O. (2020) Review of electrodeposition perspectives towards anticorrosion mitigation of mild steel. In: International Conference on Engineering for Sustainable World.

Nduma, R.C. and Fayomi, O. S. I and Nkiko, Mojisola O. and Inegbenebor, A.O. and Udoye, Nduka Ekene and Onyisi, Ozuor and Sanni, O. and Fayomi, J. (2020) Review of metal protection techniques and application of drugs as corrosion inhibitors on metals. In: International Conference on Engineering for Sustainable World.

Fayomi, O. S. I and Joseph, O. O and Fashola, O. J. and Popoola, A. P. I. and Loto, C. A. and Samuel, O.D. and Banjo, SolomonO. and AKANDE, I.G and Joshua, T.O and Abdulwahab, M and Babalola, P.O. and Ademuyiwa, F. and Ayoola, A. A. and Sanni, T.F. and Fayomi, J. (2020) Surface Protection of Carbon Steel with ZrO2 Composite Induced Zinc Based Electrolytic cell via Electrodeposition Technique. In: International Conference on Engineering for Sustainable World, 2019, Online.

Udoye, Nduka Ekene and Fayomi, O. S. I and Inegbenebor, A.O. (2019) Assessment of Wear Resistance of Aluminium Alloy in Manufacturing Industry-A Review. In: International Conference on Sustainable Materials Processing and Manufacturing,.

Fayomi, O. S. I and AKANDE, I.G and Ohunakin, O.S. and Ajayi, O. O. and Oyedepo, Sunday Olayinka (2019) Organizational challenges in the adoption of wind energy in Africa. In: AIP Conference Proceedings, 2019, Online.

Fayomi, G.U. and Mini, S. E. and Fayomi, O. S. I and Ayoola, A. A. (2019) Perspectives on environmental CO2 emission and energy factor in Cement Industry. In: International Conference on Energy and Sustainable Environment, 2019, Online.

Ayoola, A. A. and Fayomi, O. S. I and AKANDE, I.G and Adeeyo, O.A. and Obanla, O. R. and Abatan, Olubunmi G. and Babatunde, Damilola Elizabeth and Olawepo, A.V and Fagbiele, Omololu Oluwatobi and Olomo, V. D. (2019) Production of Adhesive from Cassava Starch. In: International Conference on Engineering for Sustainable World, 2019, Online.

Inegbenebor, A.O. and Inegbenebor, A. I. and Ajayi, E. I. and Aladesuyi, O. and Ogunleye, O. M. and Fayomi, O. S. I and Babalola, P.O. and Omoleye, James and Boyo, H. I. and Adebesin, A. A. (2019) Reconnaissance Study of Smectite ores of Lafarge- Ewekoro, Ogun State Nigeria for Industrial Applications. In: International Conference on Engineering for Sustainable World, 2019, Online.

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I (2019) Thermal energy assessment of oil bean stalk as a novel additive to building ceilings. In: AIP Conference Proceedings.

Joshua, T.O and Fayomi, O. S. I and Olatuja, F.H and Inegbenebor, A.O. (2019) hardness and microstructural behavior of normalized steel welded joint under varying temperature. In: International Conference on Sustainable Materials Processing and Manufacturing,.

Fayomi, O. S. I and Anawe, Paul Apeye Lucky and Inegbenebor, A.O. and Udoye, Nduka Ekene (2018) Comparative Assessment Of The Microhardness And Plastic Degradation Mechanism Of deposited Modulated Coatings On Mild Steel. In: AIP Conference Proceedings, 2018.

Fayomi, O. S. I and Anawe, Paul Apeye Lucky and Ayoola, A. A. and Joseph, O. O (2018) Anti-Corrosion Activities of Apen-Class Inhibitive Drug on Aluminium Alloy in Simulated Chloride Environment. In: AIP Conference Proceedings, 2018.

Inegbenebor, A.O. and Fayomi, O. S. I and Joshua, Opeyemi and Jolayemi, Kayode J. and Inegbenebor, A. I. and Joseph, O. O (2018) Assessment of Some Clay South West and Aluminmium Dross as Roofing Tile Materials. In: 1st International Conference on Engineering for Sustainable World (ICESW), 2018.

Fayomi, O. S. I and Okokpujie, Imhade P. and Kilanko, O. O (2018) Challenges of Research in Contemporary Africa World. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Onawumi, A.S. and Fayomi, O. S. I and Okolie, T. A. Sociis and Adio, Timilehin and Udoye, Nduka Ekene and Samuel, A.U. (2018) Determination of a spark ignition engine's performance parameters using response surface methodology. In: Technologies and Materials for Renewable Energy, Environment and Sustainability., 19–21 September 2018, Athens, Greece.

Fayomi, O. S. I and Covenant University, SPS Seminar & Workshop Series (2018) HOW TO IDENTIFY AND INITIATE AN APPROPRIATE RESEARCH PROJECT. In: SPS Seminar & Workshop Series Covenant University, 30th October, 2018, Covenant University Ota.

Dirisu, J. O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Mmuokebe, J.I (2018) Performance assessment of the firefighting personal protective tunic. In: Technologies and Materials for Renewable Energy, Environment and Sustainability, 19–21 September 2018, Athens, Greece.

Fayomi, O. S. I and Okokpujie, Imhade P. and Udo, Mfon .O (2018) The Role of Research in Attaining Sustainable Development Goals. In: IOP Conf. Series: Materials Science and Engineering.

Dirisu, Joy Favour and Fayomi, O. S. I and Oyedepo, Sunday Olayinka (2018) Thermal Emission and heat transfer characteristics of ceiling materials: a necessity. In: Technologies and Materials for Renewable Energy, Environment and Sustainability, 19–21 September 2018, Athens, Greece.

Kanyane, L.R and Fayomi, O. S. I and Popoola, A. P. I. and Monyai, T. (2017) Experimental Study of the interaction of solanum Tuberosum Fluid as Additive in Eletrodeposition Bath in the presence of Zn-Ti02 on mild steel. In: International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2017, 23-25 January 2017, Kruger National Park.

Anawe, Paul Apeye Lucky and Raji, A. O and Fayomi, O. S. I and Efeovbokhan, Vincent Enon (2017) Influence of Composite Nano Coating on Ternary Sulphate Co-deposition: Corrossion and Surface Characterization. In: International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2017, 23-25 January 2017, Kruger National Park.

Fayomi, O. S. I and Popoola, A. P. I. and Joseph, O. O (2017) Assessment of Potassium Chromate Inhibition and Adsorption on Type A513 Mild Steel in Simulated Contaminated Media. In: International Conference on Technologies and Materials for Renewable Energy, Environment and Sustainability, TMREES17, 21-24 April, Beirut Lebanon.

Joseph, O. O and Sivaprasad, S. and Fayomi, O. S. I (2017) Comparative study on the effect of NaNO2 in corrosion inhibition of micro-alloyed and API-5L X65 steels in E20 simulated FGE. In: International Conference on Technologies and Materials for Rene wable Energy, Environment and Sustainability, TMREES1, 21-24 April, Beirut Lebanon.

Phala, M.F and Popoola, A. P. I. and Fayomi, O. S. I (2017) Corrosion and Properties of Developed Ni-CeO2 Co-deposited on Mild Steel at Varying Current Desities. In: International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2017, 23-25 January 2017, Kruger National Park.

Joseph, O. O and Fayomi, O. S. I and Adenigba, O.A (2017) Effect of lecaniodiscus cupaniodes extract in corrosion inhibition of normalized and annealed mild steels in 0.5 M HCl. In: International Conference on Technologies and Materials for Rene wable Energy, Environment and Sustainability, TMREES1, 21-24 April, Beirut Lebanon.

Joseph, O. O and Fayomi, O. S. I and Adenigba, O.A (2017) Effect of lecaniodiscus cupaniodes extract in corrosion inhibition of normalized and annealed mild steels in 0.5 M HCl. In: International Conference on Technologies and Materials for Renewable Energy, Environment and Sustainability.

Machethe, K.E and Popoola, A. P. I. and Adebiyi, D.I and Fayomi, O. S. I (2017) Influence of Sic-Ti/Al on the microstructural and Mechanical Properties of Deposited Ti-6V-4Al Alloy with cold Spray Technique. In: International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2017, 23-25 January 2017, Kruger National Park.

Monyai, T. and Fayomi, O. S. I and Popoola, A. P. I. (2017) Influence on Transitional Rare Earth Metal Composite on The Tenary Based Sulphate Rich Coatings. In: International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2017, 23-25 January 2017, Kruger National Park.

Fayomi, O. S. I and Joseph, O. O and Popoola, A. P. I. (2017) Structural properties and microhardness performance of induced composite coatings filled with Cocos nucifera-tin functionalized oxide. In: International Conference on Technologies and Materials for Rene wable Energy, Environment and Sustainability, TMREES1, 21-24 April, Beirut Lebanon.

Anawe, Paul Apeye Lucky and Raji, O. and Fayomi, O. S. I (2016) Evaluation of Responses from Electrolytic Multilayer Hybrid Coating for Extended Application. In: International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2017, 23-25 January 2017, Kruger National Park.

Fayomi, O. S. I and Popoola, A. P. I. and Joseph, O. O and Inegbenebor, A.O. and Olukanni, D. O. (2016) Experimental Study and Effect of Particulate Interference on the Microhardness, Wear and Microstructural Properties of Ternary Doped Coating. In: AIP Conference Proceedings.

Fayomi, O. S. I and Abdulwahab, M and Gbenebor, O. P and Popoola, A. P. I (2012) Physio-Chemical and Mechanical Behaviour of(Pinussylvestris) as Binders on Foundry Core Strength. In: 2012 International Conference on Clean Technology & Engineering Management (ICCEM 2012), November 12 - 15, 2012, Mechanical Engineering, Covenant University, Ota, Nigeria.

Fayomi, O. S. I and Popoola, A. P. I. and Loto, C. A. and Popoola , M.O. (2012) Morphology and Properties of Zn-Al-TiO2 Composite on Mild Steel. In: 2012 International Conference on Clean Technology and Engineering Management (ICCEM 2012), 12th-15th, Mechanical Engineering,Covenant University,Ota,Nigeria.

Joseph, O. O and Loto, C. A. and Sivaprasad, S. and Ajayi, J.A. and Fayomi, O. S. I Comparative Assessment of the Degradation Mechanism of Micro-alloyed steel in E20 and E80 Simulated Fuel Grade Ethanol Environments. In: AIP Conference Proceedings.

Fayomi, O. S. I and Olukanni, D. O. and Fayomi, G.U. and Joseph, O. O and Popoola, A. P. I. In-Situ Evaluation of the Degradable Carbon Influence for Industrial Waste Water Treatment. In: AIP Conference Proceedings.

Okokpujie, Imhade P. and Fayomi, O. S. I and Leramo, R.O. The Role of Research in Economic Development. In: IOP Conf. Series: Materials Science and Engineering.

This list was generated on Fri Mar 29 15:11:31 2024 WAT.