Items where Author is "Kilanko, O. O"

Group by: Item Type | No Grouping

Jump to: Article | Book Section | Conference or Workshop Item

Number of items: 59.

Article

Oyebanji, J.A. and Oyedepo, Sunday Olayinka and Oyebanji, Olawumi T and Araoyinbo, Alaba and Kilanko, O. O and Dirisu, J. O. and Saleh, Bahaa (2023) Experimental investigation of heating values and chemical compositions of selected fuel woods as bio-fuel sources in developing countries. Fuel, 340.

Kilanko, O. O and Oyedepo, Sunday Olayinka and Dirisu, J. O. and Leramo, R.O. and Babalola, P.O. and Aworinde, Abraham K. and Udo, Mfon .O and Okonkwo, Alexander M and Akomolafe, Marvelous I (2023) Typical meteorological year data analysis for optimal usage of energy systems at six selected locations in Nigeria. International Journal of Low-Carbon Technologies, 18. pp. 637-658.

Leramo, R.O. and Adekoya, Lawson O. and Kilanko, O. O and Oyedepo, Sunday Olayinka and Eluwa, Stephen E. and Babalola, P.O. and Adeosun, Samson O. and Leramo, Nicholas T. and Aiyedun, Peter O. and Ohunakin, O.S. and Ajayi, O. O. and Fayomi, O. S. I (2022) A comparative analysis of the chemical composition and compliance level to established standards of concrete reinforcement steel rods rolled in Nigeria. Heliyon, 8 (6).

Oyedepo, Sunday Olayinka and Ezeuduji, D. and Araoyinbo, Alaba and Kilanko, O. O and Efemwenkiekiea, U. K. and Dirisu, J. O. and Aworinde, Abraham K. and Babalola, P.O. and Leramo, R.O. and Ahmed, Mohamed H. and Saleh, Bahaa (2022) Numerical modeling of heat transfer performance and optimization of car radiator using (H2O/Al2O3) nanofluids as coolant. Numerical Heat Transfer, Part B: Fundamentals, 82 (5). pp. 185-198.

Oyedepo, Sunday Olayinka and Ezeuduji, D. and Araoyinbo, Alaba and Kilanko, O. O and Efemwenkiekie, K. U. and Dirisu, J. O. (2022) Numerical modeling of heat transfer performance and optimization of car radiator using (H2O/Al2O3) nanofluids as coolant. International Journal of Computation and Methodology, 82 (5).

Adebayo, J. K. and Oyedepo, Sunday Olayinka and Petinrin, M. O. and Dare, A. A. and Nwaokocha, C. N. and Layeni, A. T. and Fayomi, O. S. I and Dirisu, J. O. and Kilanko, O. O (2022) Numerical simulation of microchannel double-pipe heat exchanger with ribs. AIP Conference, 2437 (1).

Kilanko, O. O and Fayomi, O. S. I and Sode, A. A. (2020) Anticorrosion Effect of Silicon Nitride and Zirconium Diboride Composite on Ni–P– Zn Electroless Deposition on Mild Steel. Journal of Bio- and Tribo-Corrosion, 6.

Kilanko, O. O and Ojolo, S.J and Leramo, R.O. and Ilori, T. A and Oyedepo, Sunday Olayinka and Babalola, P.O. and Fayomi, O. S. I and Onwordi, Patrick Nwanne and Ufot, Edidiong and Ekwere, Akaninyene (2020) Dataset on physical properties of raw and roasted cashew nuts. Data in Brief.

Oyedepo, Sunday Olayinka and Kilanko, O. O and Waheed, M. A. and Fayomi, O. S. I and Ohunakin, O.S. and Babalola, P.O. and Ongbali, Samson O. and Nwaokocha, Collins N. and Mabinuori, B. and Shopeju, O. O. (2020) Dataset on thermodynamics performance analysis and optimization of a reheat –regenerative steam turbine power plant with feed water heaters. Data in Brief. ISSN 2352-3409

Chidera, M. and Kilanko, O. O and Azeta, Joseph and Bolu, Christian (2020) An LDR Based Colour Sensor for Urine Analysis: A Review. International Journal of Emerging Trends in Engineering Research, 8 (10). ISSN 2347 - 3983

Oyedepo, Sunday Olayinka and Fakeye, B. A. and Mabinuori, B. and Babalola, P.O. and Leramo, R.O. and Kilanko, O. O and Dirisu, J. O. and Udo, Mfon .O and Efemwenkiekie, K. U. and Oyebanji, J.A. (2020) Thermodynamics analysis and performance optimization of a reheat – Regenerative steam turbine power plant with feed water heaters. Fuel.

Kilanko, O. O and Leramo, R.O. and Ilori, T. A and Oyedepo, Sunday Olayinka and Babalola, P.O. and Eluwa, Stephen E. and Onwordi, Patrick Nwanne and Ameh, N. I. and Onyenma, F. A. (2020) WITHDRAWN: Dataset on performance of solar dryer for scotch bonnet pepper drying. MethodsX. ISSN 2215-0161

Oyedepo, Sunday Olayinka and Uwoghiren, Theophilus and Babalola, P.O. and Nwanya , Stephen and Kilanko, O. O and Leramo, R.O. and Aworinde, Abraham K. and Adekeye, T. and Oyebanji, J.A. and Abidakun, O.A. (2019) Assessment of Decentralized Electricity Production from Hybrid Renewable Energy Sources for Sustainable Energy Development in Nigeria. Research Article. pp. 72-89. ISSN 1469- 8080

Oyedepo, Sunday Olayinka and Dunmade, I.S. and Adekeye, T. and Attabo, Ameh and Olawole, C. Olukunle and Babalola, P.O. and Oyebanji, J.A. and Udo, Mfon .O and Kilanko, O. O and Leramo, R.O. (2019) Bioenergy technology development in Nigeria – pathway to sustainable energy development. Int. J. Environment and Sustainable Development, 18 (2). pp. 175-205.

Ishola, Felix and Kilanko, O. O and Inegbenebor, A.O. (2019) DESIGN AND PERFORMANCE ANALYSIS OF A MODEL PICO SIZE PELTON WHEEL TURBINE. International Journal of Civil Engineering and Technology, 10 (5). pp. 727-739. ISSN 0976-6316

Ilori, T. A and Raji, A. O and Kilanko, O. O (2018) SOME PHYSICAL PROPERTIES OF SELECTED VEGETABLE. Journal of Agricultural and Veterinary Sciences, 2 . pp. 101-109.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Oyedepo, Sunday Olayinka and Kilanko, O. O and Adeyemi, Gideon Adewale (2018) Application of solar photovoltaic system to power air blower and mixing mechanism in a tilting furnace. World Review of Science, Technology and Sust. Development, X (Y, xxx). pp. 1-10.

Fayomi, G.U. and Wusu, O. and Mini, S. E. and Fayomi, O. S. I and Kilanko, O. O (2018) Data analysis on the level of exposure to pollutions inindustrial zone: Acasestudy of Ewekoro and Ota Township. Data in Brief, 19. pp. 859-864. ISSN 2352-3409

Kilanko, O. O and Ojolo, S.J and Inegbenebor, A.O. and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Oyedepo, Sunday Olayinka (2018) Design and performance evaluation of centrifugal cashew nut sheller for improving the whole kernel recovery. AgricEnglnt: CIGR, 20 (1). pp. 162-170.

Oyedepo, Sunday Olayinka and Babalola, P.O. and Nwanya , Stephen and Kilanko, O. O and Leramo, R.O. and Aworinde, Abraham K. and Adekeye, T. and Oyebanji, J.A. and Abidakun, O.A. and Agberegha, Orobome Larry (2018) Towards a Sustainable Electricity Supply in Nigeria: The Role of Decentralized Renewable Energy System. European Journal of Sustainable Development Research, 2 (4). ISSN 2542-4742

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Kilanko, O. O and Oyedepo, Sunday Olayinka and Odunfa, K. M. (2017) Producing AA1170 Based Silicon Carbide Particulate Composite through Stir Casting Method. Asian Journal of Materials Chemistry, 2 (3). pp. 1-5.

Oyedepo, Sunday Olayinka and Fagbenle, R. O. and Babarinde, T.O. and Odunfa, K. M. and Leramo, R.O. and Ohunakin, O.S. and Ajayi, O. O. and Babalola, P.O. and Kilanko, O. O and Oyegbile, A.D and Lawson-Jack, D (2017) A COMPARATIVE STUDY ON THE PERFORMANCE OF THE DOMESTIC REFRIGERATOR USINGR600A AND LPG WITH VARYING REFRIGERANT CHARGE AND CAPILLARY TUBE LENGTH. International Journal of Energy for a Clean Environment, 18 (4). pp. 287-302.

Dauda, T. O and Raji, A. O and Ilori, T. A and Adejumo,, A. O. and Kilanko, O. O (2017) EVALUATION OF MAINTENANCE CULTURE OF SOME AGRICULTURAL PROCESSING MACHINE IN OYO STATE, NIGERIA. American Journal of Agricultural Science, Engineering and Technology, 1 (3). pp. 43-52. ISSN 2158-8104 (Online), 2164-0920

Oyedepo, Sunday Olayinka and Adekeye, T. and Leramo, R.O. and Kilanko, O. O and Babalola, P.O. and Balogun, A. O. and Akhibi, M. O. (2016) Assessment of Energy Saving Potentials in Covenant University, Nigeria. Energy Engineering, 113 (3). pp. 7-26.

Oyedepo, Sunday Olayinka and Fagbenle, R. O. and Babarinde, T.O. and Odunfa, K. M. and Oyegbile, A.D and Leramo, R.O. and Babalola, P.O. and Kilanko, O. O and Adekeye, T. (2016) Effect of Capillary Tube Length and Refrigerant Charge on the Performance of Domestic Refrigerator with R12 and R600a. International Journal of Advanced Thermofluid Research, 2 (1). ISSN 2455-1368 (Online)

Oyedepo, Sunday Olayinka and Fagbenle, Olabosipo I. and Babarinde, T.O. and Odunfa, K. M. and Leramo, R.O. and Babalola, P.O. and Kilanko, O. O and Oyegbile, A.D and Lawson-Jack, D (2016) Thermodynamic Performance Analysis and Optimization of Domestic Refrigerator with Varying Refrigerant Charge and Capillary Tube Lengths. Energy Procedia. pp. 1-6.

Ilori, T. A and Raji, A. O and Kilanko, O. O (2013) Modelling some ergonomic parameters with machine parameter using hand powered maize sheller. Journal of Engineering and Technology Research, 5 (3). pp. 52-57. ISSN 2006-9790

Ojolo, S.J and Adelaja, A. O. and Orisaleye, J. I. and Kilanko, O. O (2011) Design and development of waste sorting machine. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS), 2 (4). pp. 576-580. ISSN 2141-7016

Book Section

Mbonu, C. C. and Kilanko, O. O and Kilanko, M. B. and Babalola, P.O. (2022) Turbidity and Urine Turbidity: A Mini Review. In: Bioenergy and Biochemical Processing Technologies. Springer, Cham, Switzerland, pp. 253-267. ISBN  Print ISBN978-3-030-96720-8  Online ISBN978-3-030-96721-5

Babalola, P.O. and Okunuga, T. A. and Inegbenebor, A.O. and Kilanko, O. O and Udo, Mfon .O (2022) Manufacturing of Brake Pad Using Aluminium Silicon Carbide Reinforced with Alumina for Automobile Industry. In: Advanced Manufacturing in Biological, Petroleum, and Nanotechnology Processing. Springer, Cham, Switzerland, pp. 37-44.

Mbonu, C. C. and Kilanko, O. O and Kilanko, M. B. and Babalola, P.O. (2022) Smart Toilets and Toilet Gadgets in Sustainable Smart Cities: An Overview of Personal Health Monitoring. In: Advanced Manufacturing in Biological, Petroleum, and Nanotechnology Processing. Springer, Cham, Switzerland, pp. 143-156. ISBN Print ISBN978-3-030-95819-0  Online ISBN978-3-030-95820-6

Oyebanji, J.A. and Oyedepo, Sunday Olayinka and Kilanko, O. O and Sunday, Dunmade Israel (2022) Waste-to-Energy Potential of Biofuels Production from Sawdust as a Pathway to Sustainable Energy Development. In: Bioresource Technology: Concept, Tools and Experiences. Wiley Online Library.

Oyedepo, Sunday Olayinka and Anifowose, Emmanuel G. and Obembe, Elizabeth O. and Dirisu, J. O. and Khanmohamadi, Shoaib and Kilanko, O. O and Babalola, P.O. and Ohunakin, O.S. and Leramo, R.O. and Olawole, C. Olukunle (2021) Assessment of Economic and Environmental Impacts of Energy Conservation Strategies in a University Campus. In: Green Energy: Solar Energy, Photovoltaics, and Smart Cities. Scrivener Publishing LLC.

Oyedepo, Sunday Olayinka and Anifowose, Emmanuel G. and Obembe, Elizabeth O. and Dirisu, J. O. and Khanmohamadi, Shoaib and Kilanko, O. O and Babalola, P.O. and Ohunakin, O.S. and Leramo, R.O. and Olawole, C. Olukunle (2020) Assessment of Economic and Environmental Impacts of Energy Conservation Strategies in a University Campus. In: Green Energy: Solar Energy, Photovoltaics, and Smart Cities. Scrivener Publishing LLC. ISBN ISBN: 9781119760801  Print ISBN: 9781119760764

Conference or Workshop Item

Babalola, P.O. and Kilanko, O. O and Ishola, Felix and Oyedepo, Sunday Olayinka and Ayoola, A. A. and Mbah, S. C (2022) Solar powered vaccine refrigerator for rural off-grid areas in Nigeria. In: TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY: TMREES21Gr, 28–30 May 2021, Athens, Greece.

Essien, V. and Bolu, Christian and Azeta, Joseph and Okokpujie, Imhade P. and Kilanko, O. O and Afolalu, Sunday A. (2021) Application of Data Logger for Monitoring Indoor and Outdoor Temperature of Buildings: A Review. In: International Conference on Engineering for Sustainable World, 2021, Online.

Kilanko, O. O and Leramo, R.O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Babalola, P.O. and Ilori, T. A and Mozea, K.P. and Patrick, P.N. (2021) Design and construction of a manual food grinder. In: International Conference on Engineering for Sustainable World, 2021, Online.

Oyedepo, Sunday Olayinka and Oyebanji, J.A. and Ukponu, S. N. and Kilanko, O. O and Babalola, P.O. and Fayomi, O. S. I and Dirisu, J. O. and Olawole, C. Olukunle and Leramo, R.O. and Dunmade, I.S. and Efemwenkiekie, K. U. and Shopeju, O. O. (2021) Generation of Typical Meteorological Year Data for a City in South- Western Nigeria. In: International Conference on Engineering for Sustainable World, 2021, Online.

Owolabi, T. and Bolu, Christian and Azeta, Joseph and Okokpujie, Imhade P. and Kilanko, O. O (2021) Mechanical Ventilator for Respiratory Impaired Persons: Review. In: International Conference on Engineering for Sustainable World, 2020, Online.

Emagbetere, Eyere and Oghenekovwo, Peter A. and Obinabu, Christabel C. and Aworinde, Abraham K. and Ishola, Felix and Kilanko, O. O (2021) Modelling and simulation of motor vehicle suspension system. In: International Conference on Engineering for Sustainable World, 2021, Online.

Kilanko, O. O and Babaremu, Kunle and Fayomi, O.S.I. and AKANDE, I.G (2021) Overview of Composite Materials from Green Product in Mechanical Application. In: 4th International Conference on Science and Sustainable Development, 2021, Online.

Babalola, P.O. and Kilanko, O. O and Banjo, SolomonO. and Ogulu, J.O. and Makinde, Adebisi and Jolayemi, Kayode J. and Ayara, Williams A. (2021) Reinforcement of AA1237 with Al2O3 to form Metal Matrix Composite. In: International Conference on Engineering for Sustainable World, 2019, Online.

Kilanko, O. O and Leramo, R.O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Babalola, P.O. and Ilori, T. A and Mozea, K.P. and Patrick, P.N. (2020) Design and construction of a manual food grinder. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Kilanko, O. O and Fayomi, O. S. I and AKANDE, I.G and Shopeju, O. O. and Popoola, A. P. I. (2020) Examining the impact of quality failure in a controlled environment. In: AIP Conference Proceedings, 2020, Online.

Oyedepo, Sunday Olayinka and Oyebanji, J.A. and Ukponu, S. N. and Kilanko, O. O and Babalola, P.O. and Fayomi, O. S. I and Dirisu, Joy Favour and Olawole, C. Olukunle and Leramo, R.O. and Dunmade, I.S. and Efemwenkiekie, K. U. and Shopeju, O. O. (2020) Generation of Typical Meteorological Year Data for a City in South-Western Nigeria. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Babalola, P.O. and Kilanko, O. O and Banjo, SolomonO. and Ogulu, J.O. and Makinde, Adebisi and Jolayemi, Kayode J. and Ayara, Williams A. (2020) Reinforcement of AA1237 with Al2 O3 to form Metal Matrix Composite. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Kilanko, O. O and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Eluwa, Stephen E. and Onyenma, F. A. and Ameh, N. I. and Onwordi, Patrick Nwanne and Aworinde, Abraham K. and Fajobi, M. A. (2019) Design and Performance Evaluation of a Solar Dryer. In: International Conference on Engineering for Sustainable World, 2019, Online.

Kilanko, O. O and Ojolo, S.J and Inegbenebor, A.O. and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Oyedepo, Sunday Olayinka and Ishola, Felix and Onwordi, Patrick Nwanne (2019) Development of Cashew nut Shelling Machine. In: International Conference on Engineering for Sustainable World, 2019, Online.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Kilanko, O. O and Ongbali, Samson O. (2019) Modification to Metal Matrix Composites Nomenclature. In: International Conference on Engineering for Sustainable World, 2019, Online.

Babalola, P.O. and Omada, J. E. and Kilanko, O. O and Banjo, SolomonO. and Ozuor, O. (2019) Performance Evaluation of a Centrifugal Pump with different Impeller Materials. In: International Conference on Engineering for Sustainable World, 2019, Online.

Fayomi, O. S. I and Okokpujie, Imhade P. and Kilanko, O. O (2018) Challenges of Research in Contemporary Africa World. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Kilanko, O. O and Ojolo, S.J and Inegbenebor, A.O. and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Onwordi, Patrick Nwanne (2018) Effect of Pre-Shelling Treatment on Physical and Mechanical Properties of Cashew Nut. In: IOP Conf. Series: Materials Science and Engineering.

Babalola, P.O. and Kilanko, O. O and Bolu, Christian and Inegbenebor, A.O. and Oyawale, Fetus A and Adeosun, Oluropo (2018) Empirical Models for Mechanical and Electrical Characteristics of Wrought Aluminium Alloy Reinforced with Silicon Carbide Particles. In: IOP Conf. Series: Materials Science and Engineering.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Kilanko, O. O (2018) Graphical Representations of Experimental and ANN Predicted Data for Mechanical and Electrical Properties of AlSiC Composite Prepared by Stir Casting Method. In: IOP Conf. Series: Materials Science and Engineering.

Oyedepo, Sunday Olayinka and Adekeye, T. and Lerarno, R. O. and Kilanko, O. O and Babalola, P.O. and Balogun, A. O. and Akhibi, M. O. (2015) A Study on Energy Demand and Consumption in Covenant University, Ota, Nigeria. In: 2nd Covenant University Conference on African Development Issues (CU-ICADI), 11th - 13th May, 2015, Africa Leadership Development Center, Covenant University, Ota, Nigeria..

Oyedepo, Sunday Olayinka and Adekeye, T. and Leramo, R.O. and Kilanko, O. O and Babalola, P.O. (2015) A Study on Energy Demand and Consumption in Covenant University, Ota, Nigeria. In: A Study on Energy Demand and Consumption in Covenant University, Ota, Nigeria, Covenant University.

Ilori, T. A and Dauda, T. O and Raji, A. O and Kilanko, O. O (2012) Occupational mobility in engineering profession (craftman and artisan) in Oyo State, Nigeria. In: 2012 International Conference on Clean Technology & Engineering Management (ICCEM 2012), November 12 - 15, 2012, Mechanical Engineering, Covenant University, Ota, Nigeria.

Oyedepo, Sunday Olayinka and Kilanko, O. O (2012) Thermodynamic Analysis of a Gas Turbine Power Plant Modelled with an Evaporative Cooler. In: 2012 International Conference on Clean Technology and Engineering Management (ICCEM 2012), 12th-15th, Mechanical Engineering,Covenant University,Ota,Nigeria.

This list was generated on Mon Dec 23 14:36:19 2024 WAT.