Items where Author is "Leramo, R.O."

Article

Kilanko, O. O and Oyedepo, Sunday Olayinka and Dirisu, J. O. and Leramo, R.O. and Babalola, P.O. and Aworinde, Abraham K. and Udo, Mfon .O and Okonkwo, Alexander M and Akomolafe, Marvelous I (2023) Typical meteorological year data analysis for optimal usage of energy systems at six selected locations in Nigeria. International Journal of Low-Carbon Technologies, 18. pp. 637-658.

Leramo, R.O. and Adekoya, Lawson O. and Kilanko, O. O and Oyedepo, Sunday Olayinka and Eluwa, Stephen E. and Babalola, P.O. and Adeosun, Samson O. and Leramo, Nicholas T. and Aiyedun, Peter O. and Ohunakin, O.S. and Ajayi, O. O. and Fayomi, O. S. I (2022) A comparative analysis of the chemical composition and compliance level to established standards of concrete reinforcement steel rods rolled in Nigeria. Heliyon, 8 (6).

Oyedepo, Sunday Olayinka and Ezeuduji, D. and Araoyinbo, Alaba and Kilanko, O. O and Efemwenkiekiea, U. K. and Dirisu, J. O. and Aworinde, Abraham K. and Babalola, P.O. and Leramo, R.O. and Ahmed, Mohamed H. and Saleh, Bahaa (2022) Numerical modeling of heat transfer performance and optimization of car radiator using (H2O/Al2O3) nanofluids as coolant. Numerical Heat Transfer, Part B: Fundamentals, 82 (5). pp. 185-198.

Leramo, R.O. and Adekoya, Lawson O. and Kilanko, O. O and Oyedepo, Sunday Olayinka and Eluwa, Stephen E. and Babalola, P.O. and Adeosun, Samson O. and Leramo, Nicholas T. and Aiyedun, Peter O. and Ohunakin, O.S. and Ajayi, O. O. and Fayomi, O. S. I (2022) A comparative analysis of the chemical composition and compliance level to established standards of concrete reinforcement steel rods rolled in Nigeria. Heliyon, 8 (6). ISSN 2405-8440

Loto, R. T. and Leramo, R.O. and Olowoyo, Tobilola and Igwe, Kelechi (2021) Study of the Corrosion Inhibition Reaction of Admixed Plant Distillates on Mild Steel. Key Engineering Materials, 907. pp. 268-276.

Kilanko, O. O and Ojolo, S.J and Leramo, R.O. and Ilori, T. A and Oyedepo, Sunday Olayinka and Babalola, P.O. and Fayomi, O. S. I and Onwordi, Patrick Nwanne and Ufot, Edidiong and Ekwere, Akaninyene (2020) Dataset on physical properties of raw and roasted cashew nuts. Data in Brief.

Oyedepo, Sunday Olayinka and Fakeye, B. A. and Mabinuori, B. and Babalola, P.O. and Leramo, R.O. and Kilanko, O. O and Dirisu, J. O. and Udo, Mfon .O and Efemwenkiekie, K. U. and Oyebanji, J.A. (2020) Thermodynamics analysis and performance optimization of a reheat – Regenerative steam turbine power plant with feed water heaters. Fuel.

Kilanko, O. O and Leramo, R.O. and Ilori, T. A and Oyedepo, Sunday Olayinka and Babalola, P.O. and Eluwa, Stephen E. and Onwordi, Patrick Nwanne and Ameh, N. I. and Onyenma, F. A. (2020) WITHDRAWN: Dataset on performance of solar dryer for scotch bonnet pepper drying. MethodsX. ISSN 2215-0161

Oyedepo, Sunday Olayinka and Uwoghiren, Theophilus and Babalola, P.O. and Nwanya , Stephen and Kilanko, O. O and Leramo, R.O. and Aworinde, Abraham K. and Adekeye, T. and Oyebanji, J.A. and Abidakun, O.A. (2019) Assessment of Decentralized Electricity Production from Hybrid Renewable Energy Sources for Sustainable Energy Development in Nigeria. Research Article. pp. 72-89. ISSN 1469- 8080

Oyedepo, Sunday Olayinka and Dunmade, I.S. and Adekeye, T. and Attabo, Ameh and Olawole, C. Olukunle and Babalola, P.O. and Oyebanji, J.A. and Udo, Mfon .O and Kilanko, O. O and Leramo, R.O. (2019) Bioenergy technology development in Nigeria – pathway to sustainable energy development. Int. J. Environment and Sustainable Development, 18 (2). pp. 175-205.

Ajayi, O. O. and Agarana, M. C. and Akinwumi, I. I. and Okokpujie, Imhade P. and Salawu, Enesi Y. and Abioye, Abiodun A. and Afolalu, Sunday A. and Leramo, R.O. (2019) MODELLING RATE OF TRAFFIC-INDUCED BUILDING VIBRATIONS IN SANGO-OTA, NIGERIA: AN ASSUMPTION BASED ANALYSIS. WIT Transactions on The Built Environment, 182. pp. 303-313. ISSN 1743-3509

Roland, T. and Leramo, R.O. and Oyebade, Babatunde (2018) Synergistic Combination Effect of Salvia officinalis and Lavandula officinalis on the Corrosion Inhibition of Low-Carbon Steel in the Presence of SO42−- and Cl−-Containing Aqueous Environment. Journal of Failure Analysis and Prevention, 18. pp. 1429-1438.

Kilanko, O. O and Ojolo, S.J and Inegbenebor, A.O. and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Oyedepo, Sunday Olayinka (2018) Design and performance evaluation of centrifugal cashew nut sheller for improving the whole kernel recovery. AgricEnglnt: CIGR, 20 (1). pp. 162-170.

Oyedepo, Sunday Olayinka and Babalola, P.O. and Nwanya , Stephen and Kilanko, O. O and Leramo, R.O. and Aworinde, Abraham K. and Adekeye, T. and Oyebanji, J.A. and Abidakun, O.A. and Agberegha, Orobome Larry (2018) Towards a Sustainable Electricity Supply in Nigeria: The Role of Decentralized Renewable Energy System. European Journal of Sustainable Development Research, 2 (4). ISSN 2542-4742

Oyedepo, Sunday Olayinka and Fagbenle, R. O. and Babarinde, T.O. and Odunfa, K. M. and Leramo, R.O. and Ohunakin, O.S. and Ajayi, O. O. and Babalola, P.O. and Kilanko, O. O and Oyegbile, A.D and Lawson-Jack, D (2017) A COMPARATIVE STUDY ON THE PERFORMANCE OF THE DOMESTIC REFRIGERATOR USINGR600A AND LPG WITH VARYING REFRIGERANT CHARGE AND CAPILLARY TUBE LENGTH. International Journal of Energy for a Clean Environment, 18 (4). pp. 287-302.

Adelekan, D.S and Ohunakin, O.S. and Babarinde, T.O. and Odunfa, K. M. and Leramo, R.O. and Oyedepo, Sunday Olayinka (2017) Experimental performance of LPG refrigerant charges with varied concentration of TiO2 nano-lubricants in a domestic refrigerator. Case Studies in Thermal Engineering, 9. pp. 55-61.

Oyedepo, Sunday Olayinka and Adekeye, T. and Leramo, R.O. and Kilanko, O. O and Babalola, P.O. and Balogun, A. O. and Akhibi, M. O. (2016) Assessment of Energy Saving Potentials in Covenant University, Nigeria. Energy Engineering, 113 (3). pp. 7-26.

Oyedepo, Sunday Olayinka and Fagbenle, R. O. and Babarinde, T.O. and Odunfa, K. M. and Oyegbile, A.D and Leramo, R.O. and Babalola, P.O. and Kilanko, O. O and Adekeye, T. (2016) Effect of Capillary Tube Length and Refrigerant Charge on the Performance of Domestic Refrigerator with R12 and R600a. International Journal of Advanced Thermofluid Research, 2 (1). ISSN 2455-1368 (Online)

Oyedepo, Sunday Olayinka and Fagbenle, Olabosipo I. and Babarinde, T.O. and Odunfa, K. M. and Leramo, R.O. and Babalola, P.O. and Kilanko, O. O and Oyegbile, A.D and Lawson-Jack, D (2016) Thermodynamic Performance Analysis and Optimization of Domestic Refrigerator with Varying Refrigerant Charge and Capillary Tube Lengths. Energy Procedia. pp. 1-6.

Joseph, O. O and Joseph, O. O and Leramo, R.O. and Ojudun, O.S. (2015) Effect of Heat Treatment on Microstructure and Mechanical Properties of SAE 1025 Steel: Analysis by one-way ANOVA. J. Mater. Environ. Sci., 6 (1). pp. 101-106. ISSN 2028-2508

Abidakun, O.A. and Leramo, R.O. and Ohunakin, O.S. and Babarinde, T.O. and Ekundayo-Osunkoya, A.O. (2014) Quality Improvement of Foundry Operation in Nigeria Using Six Sigma Technique. Canadian Journal of Pure and Applied Sciences, 8 (1). pp. 2751-2760. ISSN 1920-3853

Ohunakin, O.S. and Leramo, R.O. and Abidakun, O.A. and Odunfa, Moradeyo K. and Bafuwa, O. T. (2013) Energy and Cost Analysis of Cement Production Using the Wet and Dry Processes in Nigeria. Energy and Power Engineering. pp. 537-559.

Book Section

Oyedepo, Sunday Olayinka and Anifowose, Emmanuel G. and Obembe, Elizabeth O. and Dirisu, J. O. and Khanmohamadi, Shoaib and Kilanko, O. O and Babalola, P.O. and Ohunakin, O.S. and Leramo, R.O. and Olawole, C. Olukunle (2021) Assessment of Economic and Environmental Impacts of Energy Conservation Strategies in a University Campus. In: Green Energy: Solar Energy, Photovoltaics, and Smart Cities. Scrivener Publishing LLC.

Oyedepo, Sunday Olayinka and Anifowose, Emmanuel G. and Obembe, Elizabeth O. and Dirisu, J. O. and Khanmohamadi, Shoaib and Kilanko, O. O and Babalola, P.O. and Ohunakin, O.S. and Leramo, R.O. and Olawole, C. Olukunle (2020) Assessment of Economic and Environmental Impacts of Energy Conservation Strategies in a University Campus. In: Green Energy: Solar Energy, Photovoltaics, and Smart Cities. Scrivener Publishing LLC. ISBN ISBN: 9781119760801  Print ISBN: 9781119760764

Conference or Workshop Item

Orhevba, Amanda O. and Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Leramo, R.O. and Dirisu, J. O. and Afolalu, Sunday A. (2022) Rinser Machine and the Dynamics-based Failure Analysis for Spur Gear Fault Detection: A Forensic Review. In: International Conference on Energy and Sustainable Environment.

Loto, R. T. and Loto, C. A. and Leramo, R.O. and Oyebade, Babatunde (2021) Corrosion inhibition and statistical data of low carbon steel in HCl media by admixed organic compounds. In: ICAPSM, 2021, Online.

Kilanko, O. O and Leramo, R.O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Babalola, P.O. and Ilori, T. A and Mozea, K.P. and Patrick, P.N. (2021) Design and construction of a manual food grinder. In: International Conference on Engineering for Sustainable World, 2021, Online.

Oyedepo, Sunday Olayinka and Oyebanji, J.A. and Ukponu, S. N. and Kilanko, O. O and Babalola, P.O. and Fayomi, O. S. I and Dirisu, J. O. and Olawole, C. Olukunle and Leramo, R.O. and Dunmade, I.S. and Efemwenkiekie, K. U. and Shopeju, O. O. (2021) Generation of Typical Meteorological Year Data for a City in South- Western Nigeria. In: International Conference on Engineering for Sustainable World, 2021, Online.

Ongbali, Samson O. and Oladipupo, Segun Isaac and Afolalu, Sunday A. and Udoh, M.O. and Leramo, R.O. (2021) Material efficiency: a key sustainable manufacturing strategy. In: IOP Conference Series: Materials Science and Engineering.

Ongbali, Samson O. and Akinyemi, A. A. and Afolalu, Sunday A. and Leramo, R.O. and Ombugadu, M. G. (2021) Sustainability of Infrastructural Projects in Nigeria: A Critical Review. In: International Conference on Engineering for Sustainable World, 2021, Online.

Kilanko, O. O and Leramo, R.O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Babalola, P.O. and Ilori, T. A and Mozea, K.P. and Patrick, P.N. (2020) Design and construction of a manual food grinder. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Oyedepo, Sunday Olayinka and Oyebanji, J.A. and Ukponu, S. N. and Kilanko, O. O and Babalola, P.O. and Fayomi, O. S. I and Dirisu, Joy Favour and Olawole, C. Olukunle and Leramo, R.O. and Dunmade, I.S. and Efemwenkiekie, K. U. and Shopeju, O. O. (2020) Generation of Typical Meteorological Year Data for a City in South-Western Nigeria. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Kilanko, O. O and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Eluwa, Stephen E. and Onyenma, F. A. and Ameh, N. I. and Onwordi, Patrick Nwanne and Aworinde, Abraham K. and Fajobi, M. A. (2019) Design and Performance Evaluation of a Solar Dryer. In: International Conference on Engineering for Sustainable World, 2019, Online.

Kilanko, O. O and Ojolo, S.J and Inegbenebor, A.O. and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Oyedepo, Sunday Olayinka and Ishola, Felix and Onwordi, Patrick Nwanne (2019) Development of Cashew nut Shelling Machine. In: International Conference on Engineering for Sustainable World, 2019, Online.

Kilanko, O. O and Ojolo, S.J and Inegbenebor, A.O. and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Onwordi, Patrick Nwanne (2018) Effect of Pre-Shelling Treatment on Physical and Mechanical Properties of Cashew Nut. In: IOP Conf. Series: Materials Science and Engineering.

Oyedepo, Sunday Olayinka and Adekeye, T. and Leramo, R.O. and Kilanko, O. O and Babalola, P.O. (2015) A Study on Energy Demand and Consumption in Covenant University, Ota, Nigeria. In: A Study on Energy Demand and Consumption in Covenant University, Ota, Nigeria, Covenant University.

Okokpujie, Imhade P. and Fayomi, O. S. I and Leramo, R.O. The Role of Research in Economic Development. In: IOP Conf. Series: Materials Science and Engineering.