Items where Author is "Salawu, Enesi Y. "

Group by: Item Type | No Grouping

Number of items: 67.

Edun, B.M and Ajayi, O. O. and Babalola, P.O. and Salawu, Enesi Y. (2023) Effect of Case Hardening on the Wear and hardness properties of Medium Carbon Steel for Bone Crushing Application. HELIYON.

Noiki, Ayodeji A. and Salawu, Enesi Y. and Afolalu, Sunday A. and Kayode, Joseph F. and Lawal, Sunday L. (2023) Green Supply Chain Management: Impacts, Challenges, Opportunities, and Future Perspectives. In: International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB‐SDG), 05‐07 April 2023, Omu‐Aran, Nigeria.

Ehi‐Okoebor, Clifford and Salawu, Enesi Y. and Afolalu, Sunday A. and Ajayi, O. O. and Kayode, Joseph F. and Lawal, Sunday L. (2023) Importance of hybrid organic carburizers on the Mechanical properties of mild steel: A Review. In: International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB‐SDG), 05‐07 April 2023, Omu‐Aran, Nigeria.

Noiki, Ayodeji A. and Salawu, Enesi Y. and Afolalu, Sunday A. and Kayode, F. Joseph and Lawal, Sunday L. (2023) Leveraging Modelling and Simulation to address Manufacturing Challenges. In: 2023 International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB‐SDG), 05‐07 April 2023, Omu‐Aran, Nigeria.

Ongbali, Samson O. and Afolalu, Sunday A. and Salawu, Enesi Y. and Omotehinse, Samuel A. (2023) Review of Project Monitoring and Evaluation Technique as Index for Sustainable Manufacturing Performance. In: 2023 International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB-SDG), 05-07 April 2023, Online.

Salawu, Enesi Y. and Adediran, A. A. and Ajayi, O. O. and Inegbenebor, A.O. and Dirisu, J. O. (2022) On the analyses of carbon atom diffused into grey cast iron during carburisation process. scientific reports.

Orhevba, Amanda O. and Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Leramo, R.O. and Dirisu, J. O. and Afolalu, Sunday A. (2022) Rinser Machine and the Dynamics-based Failure Analysis for Spur Gear Fault Detection: A Forensic Review. In: International Conference on Energy and Sustainable Environment.

Ogbonnaya, Mercy and Ajayi, O. O. and Waheed, M. A. and Salawu, Enesi Y. (2022) Thermophysical Properties and Heat Transfer Characteristics of Nanorefrigerants: Some Existing Results and Areas for Further Researches. Scientific.Net, 917. pp. 207-227.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Afolalu, Sunday A. and Edun, B.M (2021) Dynamic Simulation of Gear System Based on 2D Space Multibody Physics: A Sustainable Gear Design Approach. In: International Conference on Engineering for Sustainable World.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Afolalu, Sunday A. and Aroyinbo, A. (2021) Material Selection and Processing Techniques: Crucial Factors for Gear Engineering. In: International Conference on Engineering for Sustainable World, 2021, Online.

Salawu, Enesi Y. and Ajayi, O. O. and Okeniyi, Joshua Olusegun and Inegbenebor, A.O. and Afolalu, Sunday A. and Ongbali, Samson O. and Banjo, SolomonO. (2021) On the prediction of power loss in helical gearbox via simulation approach. Cleaner Engineering and Technology, 3. pp. 1-6.

Afolalu, Sunday A. and Salawu, Enesi Y. and Joseph, O. O and Oladipupo, Segun Isaac and Emetere, Moses and Ongbali, Samson O. and Abioye, Abiodun A. and Akinlabi, Stephen A. (2021) Overview Impacts of Heat Treatment Techniques on Grain Structures of a Steel. In: International Conference on Engineering for Sustainable World, 2021, Online.

Ongbali, Samson O. and Afolalu, Sunday A. and Oyedepo, Sunday Olayinka and Inegbenebor, A.O. and Salawu, Enesi Y. (2021) The Role of Physical Distributionin Supply Chain Enterprise and the Accompanying Bottleneck Problems: A Review. Turkish Journal of Computer and Mathematics Education, 12 (13). pp. 3312-3318.

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Salawu, Enesi Y. and Oyekunle, J. A. O. and Asere, A.A. and Efemwenkiekie, K. U. (2021) Surface Chemistry Studies of Emission and Thermal Behaviour of Developed Composites for Building Ceiling Materials. Silicon.

Edun, B.M and Ajayi, O. O. and Babalola, P.O. and Salawu, Enesi Y. (2021) effect of Heat Treatment Method on the Fatigue Behaviour of Hammermill: A Review. In: International Conference on Engineering for Sustainable World, 2021, Online.

Fajobi, M. A. and Salawu, Enesi Y. and Azeta, Joseph and Dirisu, J. O. and Ajayi, O. O. and Onwordi, Patrick Nwanne (2020) Development of a Human Powered Pedal Washing MACHINE. In: 6th International Conference on Advanced Engineering and Technology, 2020, Online.

Fajobi, M. A. and Salawu, Enesi Y. and Azeta, Joseph and Dirisu, Joy Favour and Ajayi, O. O. and Onwordi, Patrick Nwanne (2020) Development of a Human Powered Pedal Washing MACHINE. In: 6th International Conference on Advanced Engineering and Technology, 2020, Online.

Edun, B.M and Ajayi, O. O. and Babalola, P.O. and Salawu, Enesi Y. (2020) Effect of Heat Treatment Methods on the Fatigue Behaviour of Hammermill: A Review. In: ICISW�.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Popoola, A. P. I. and Akinlabi, Esther T. and Omotosho, Olugbenga Adeshola and Uyor, U. O. (2020) Electrochemical study and gravimetric behaviour of gray cast iron in varying concentrations of blends as alternative material for gears in ethanol environment. Journal of Materials Research and Technology, 9 (4). pp. 7529-7539.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Akinlabi, Esther T. and Popoola, A. P. I. and Uyor, U. O. (2020) Investigation of the effects of selected bio-based carburising agents on mechanical and microstructural characteristics of gray cast iron. Heliyon.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, S. (2020) Material Selection and Processing Techniques: Crucial Factors for Gear Engineering. In: International Conference on Engineering for Sustainable World.

Salawu, Enesi Y. and Ajayi, O. O. and Fajobi, M. A. and Ishola, Felix and Azeta, Joseph (2020) Structural Fabrication and Dynamic Simulation of Stress of a Vibrosieve for Efficient Industrial Applications. Advances in Manufacturing Engineering. pp. 715-724.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Afolalu, Sunday A. (2019) Constitutive Model to Analyse the effect of Variation in Temperature Distribution on the Rate of Heat Transfer around a Spur Gear Tooth. In: International Conference on Sustainable Materials Processing and Manufacturing. (In Press)

Ohijeagbon, O. D. and Ajayi, O. O. and Waheed, O. and Adekojo, M. and Salawu, Enesi Y. and Oyawale, Fetus A (2019) Design of Optimal Hybrid Renewable Energy System for Sustainable Power Supply to Isolated-grid Communities in North Central, Nigeria. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Salawu, Enesi Y. and Oghenevwegba, Emuowhochere and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Esther T. and Akinlabi, S.T (2019) Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach. In: 148th Annual Meeting & Exhibition Supplemental .

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Popoola, A. P. I. and Uyor, U. O. (2019) Effects of Heat Treatment Techniques on the Fatigue Behaviour of Steel Gears: A Review. In: International Conference on Engineering for Sustainable World, 2019, Online.

Afolalu, Sunday A. and Efekodha, Great E. and Ongbali, Samson O. and Abioye, Abiodun A. and Salawu, Enesi Y. and Ajayi, O. O. and Oluwabunmi, Abioye P. (2019) Experimental Analysis of the Effect of Tri-Nano Additives on Wear Rate of Mild Steel during Machining. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Azeta, Joseph and Ishola, Felix and Akinpelu, T. and Bolu, Christian and Dirisu, Joy Favour and Fajobi, M. A. and Salawu, Enesi Y. (2019) An Experimental Evaluation of LTA on the performance of a drone. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. (2019) Forensic Investigation of a Failed Intermediate Starwheel Spur Gear Tooth in a Filler Machine. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Akinlabi, Esther T. and Ishola, Felix (2019) Influence of Von Mises Stress on the Deformation behaviour of a Pinion Spur Gear under Cyclic Loading in a Bottling Machine: An Approach for predicting surface Fatigue failure in Gears. International Journal of Engineering Research and Technology, 12 (12). pp. 2207-2211. ISSN 0974-3154

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Akinlabi, Esther T. (2019) Influence of pulverized palm kernel and egg shell additives on the hardness, coefficient of friction and microstructure of grey cast iron material for advance applications. Results in Engineering.

Ajayi, O. O. and Ukasoanya, Daniel E. and Ogbonnaya, Mercy and Salawu, Enesi Y. and Okokpujie, Imhade P. and Akinlabi, Stephen A. and Akinlabi, Esther T. and Owoeye, T. F. (2019) Investigation of the Effect of R134a/Al2O3 –Nanofluid on the Performance of a Domestic Vapour Compression Refrigeration System. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. (2019) MICRO-STRUCTURAL AND MECHANICAL CHARACTERIZATION OF PULVERIZED WOOD CHARCOAL AND EGG-SHELL AS ORGANIC CARBON ADDITIVES FOR GREY CAST IRON CARBURIZATION. International Journal of Mechanical and Production Engineering Research and Development, 9 (6). pp. 391-398. ISSN 2249–8001

Ajayi, O. O. and Agarana, M. C. and Akinwumi, I. I. and Okokpujie, Imhade P. and Salawu, Enesi Y. and Abioye, Abiodun A. and Afolalu, Sunday A. and Leramo, R.O. (2019) MODELLING RATE OF TRAFFIC-INDUCED BUILDING VIBRATIONS IN SANGO-OTA, NIGERIA: AN ASSUMPTION BASED ANALYSIS. WIT Transactions on The Built Environment, 182. pp. 303-313. ISSN 1743-3509

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. (2019) Predictive Modelling of a K-Unit Bottling Plants for Reliability Improvement. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. (2019) TURBULENCE FLOW SIMULATION OF MOLTEN METALS IN RUNNERS FOR DEFECT CONTROL IN CASTING OF A SPUR GEAR BLANK. International Journal of Mechanical Engineering and Technology, 10 (1). pp. 1921-1933. ISSN 0976-6359

Azeta, Joseph and Salawu, Enesi Y. and Fajobi, M. A. and Ajayi, O. O. and Dirisu, Joy Favour and Onwardi, Patrick N. and Aworinde, Abraham K. (2019) Technical Innovations for Developing Countries: The Case of a Human‐Powered Fruit Blender. International Journal of Mechanical Engineering and Technology, 10 (3). pp. 673-679.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Afolalu, Sunday A. (2019) Temperature Distribution on the Rate of Heat Transfer around a Spur Gear Tooth. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Afolalu, Sunday A. and Ongbali, Samson O. (2018) PARETO ANALYSIS OF PRODUCT QUALITY FAILURES AND COST EFFECTS IN BOTTLING MACHINES-A LEAN THINKING SOLUTION FOR ALCOHOL INDUSTRY. International Journal of Mechanical Engineering and Technology, 9 (11). pp. 2380-2388. ISSN 0976-6340 and ISSN Online: 0976-6359

Azeta, Joseph and Okokpujie, Imhade P. and Okokpujie, Kennedy O. and Salawu, Enesi Y. (2018) ANALYTICAL STUDY OF A ROAD TRAFFIC CONFLICT AT THE T-JUNCTION OF UNIVERSITY OF BENIN MAIN GATE. International Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 1048-1061. ISSN 0976-6316

Okokpujie , Imhade P. and Salawu, Enesi Y. and Nwoke , Obinna N. and Okonkwo , Ugochukwu C. and Ohijeagbon, I. O. and Okokpujie, Kennedy O. (2018) Effects of Process Parameters on Vibration Frequency in Turning Operations of Perspex Material. In: Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2018. London, U.K, pp. 700-707.

Afolalu, Sunday A. and Salawu, Enesi Y. and Oluyemi, Kehinde and Ayuba, Samuel U. and Ihebom, Ikechi V. and Elewa, Remilekun R. (2018) Failure Mode and Effect Analysis a Tool for Reliability Evaluation: Review. European Journal of Engineering Research and Science, 3 (2). pp. 65-68.

Salawu, Enesi Y. and Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Agarana, M. C. (2018) Numerical Modeling and Evaluation of Involute Curve Length of a Spur Gear Tooth to Maintain Constant Velocity Ratio While in Motion. In: Proceedings of the International MultiConference of Engineers and Computer Scientists, March 14-16, 2018, Hong Kong.

Salawu, Enesi Y. and Okokpujie, Imhade P. and Afolalu, Sunday A. and Ajayi, O. O. and Azeta, Joseph (2018) INVESTIGATION OF PRODUCTION OUTPUT FOR IMPROVEMENT. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 915-922. ISSN 2249-6890

Okokpujie , Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O and Okonkwo , Ugochukwu C. and Orodu, Kale B. and Ikumapayi, O. M. (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O and Okonkwo , Ugochukwu C. and Orodu, Kale B. and Ikumapayi, O. M. (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Salawu, Enesi Y. and Okokpujie, Imhade P. and Ajayi, O. O. and Agarana, M. C. (2018) Analytical Technique for the Determination of Hoop Stress and Radial Stress on the Tooth Spur Gear under Vertical Loading in a Food Packaging Machine. In: International MultiConference of Engineers and Computer Scientists 2018 Vol II, March 14-16, 2018, Hong Kong.

Afolalu, Sunday A. and Asonaminasom, Ezekiel H and Ongbali, Samson O. and Abioye, Abiodun A. and Udo, Mfon .O and Salawu, Enesi Y. (2018) Dataset on experimental investigation of optimum carburizing temperature and holding time of bi-nano additives treatment of AISI 5130 steel. Data in Brief, 19. pp. 2279-2283.

Afolalu, Sunday A. and Asonaminasom, Ezekiel H and Ongbali, Samson O. and Abioye, Abiodun A. and Udo, Mfon .O and Salawu, Enesi Y. (2018) Dataset on experimental investigation of optimum carburizing temperature and holdingtime of bi-nano additives treatment of AISI 5130 steel. Data in Brief, 19. pp. 2279-2283.

Ajayi, O. O. and Ukasoanya, Daniel E. and Owoeye, T. F. and Salawu, Enesi Y. and Ohijeagbon, I. O. and Oyawale, Fetus A and Agarana, M. C. (2018) Experimental Investigation into the Effects of Al-composite Nanolubricants on the Energy and Exergy Performance of Vapour Compression Refrigerator Compressor. In: World Congress on Engineering, July 4-6, 2018, London, U.K..

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, A. A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel (ASTM A36). In: 6th International Conference on Nano and Materials Science, 2018.

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel (ASTM A36). In: 6th International Conference on Nano and Materials Science, 2018.

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel(ASTM A36). In: International Conference on Nano and Materials Science.

Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Okwuobi, Samuel and Ishola, Felix and Ajayi, O. O. and Salawu, Enesi Y. and Aworinde, Abraham K. and Olatunji , Obafemi and Akinlabi, Stephen A. (2018) A Reliability-Centered Maintenance Study for an Individual Section-Forming Machine. Machines, 6 (50).

Afolalu, Sunday A. and Okokpujie, Imhade P. and Salawu, Enesi Y. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ikumapayi, O. M. (2018) Study of the Performances of Nano-Case Treatment Cutting Tools on Carbon Steel Work Material during Turning Operation. In: International Conference on Nano and Materials Science.

Afolalu, Sunday A. and Okokpujie, Imhade P. and Salawu, Enesi Y. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ikumapayi, O. M. (2018) Study of the Performances of Nano-Case Treatment Cutting Tools on Carbon Steel Work Material during Turning Operation. In: 6th International Conference on Nano and Materials Science AIP Conf. Proc.

Orisanmi , B.O and Afolalu, Sunday A. and Adetunji, Olayide R. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Akinyemi , O.O and Abioye, Oluwabunmi P. (2017) Cost of Corrosion of Metallic Products in Federal University of Agriculture, Abeokuta. International Journal of Applied Engineering Research, 12 (24). pp. 14141-14147. ISSN ISSN 0973-4562

Okokpujie, Imhade P. and Okokpujie, Kennedy O. and Salawu, Enesi Y. and Ismail, Abdurrahman O (2017) Design, Production and Testing of a Single Stage Centrifugal Pump. International Journal of Applied Engineering Research, 12 (18). 7426 -7434. ISSN 0973-4562

Orisanmi, B.O and Afolalu, Sunday A. and Adetunji, Olajide R. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Akinyemi, I. O. and Abioye, Oluwabunmi P. (2017) Cost of Corrosion of Metallic Products in Federal University of Agriculture, Abeokuta. International Journal of Applied Engineering, 12 (24). pp. 14141-14147. ISSN 0973-4562

Afolalu, Sunday A. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Udo, Mfon .O and Adetunji, Olajide R. and Ikumapayi, Omolayo M. (2017) Experimental Analysis of the Wear Properties of Carburized HSS (ASTM A600) Cutting Tool. International Journal of Applied Engineering Research, 12 (19). pp. 8995-9003. ISSN 0973-4562

Afolalu, Sunday A. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Udo, Mfon .O and Adetunji, Olajide R. and Ikumapayi, O. M. (2017) Experimental Analysis of the Wear Properties of Carburized HSS (ASTM A600) Cutting Tool. International Journal of Applied Engineering Research, 12 (19). pp. 8995-9003. ISSN 0973-4562

Okokpujie, Imhade P. and Ikumapayi, O. M. and Okonkwo , Ugochukwu C. and Salawu, Enesi Y. and Afolalu, Sunday A. and Dirisu, Joseph O. and Nwoke , Obinna N. and Ajayi, O. O. (2017) Experimental and Mathematical Modeling for Prediction of Tool Wear on the Machining of Aluminium 6061 Alloy by High Speed Steel Tools. Open Eng, 7. pp. 461-469.

Salawu, Enesi Y. and Ajayi, O. O. and Olatunji, O. O. (2015) Theoretical Modelling Of Thermal-Hoop Stress Around The Tooth Of A Spur Gear In A Filler Machine. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2 (2). pp. 1635-1640. ISSN 3159-0040

This list was generated on Mon Dec 23 14:25:24 2024 WAT.