University Links: Home Page | Site Map
Covenant University Repository

Items where Author is "Afolalu, Sunday A. "

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 51.

Article

Udo, Mfon .O and Esezobor, D. E. and Apeh, F. I. and Afolalu, Sunday A. (2018) Factors Affecting Ballability of Mixture Iron Ore Concentrates and Iron Oxide Bearing Wastes in Metallurgical Processing. Journal of Ecological Engineering, 19 (3). pp. 235-242.

Afolalu, Sunday A. and Salawu, Enesi Y. and Oluyemi, Kehinde and Ayuba, Samuel U. and Ihebom, Ikechi V. and Elewa, Remilekun R. (2018) Failure Mode and Effect Analysis a Tool for Reliability Evaluation: Review. European Journal of Engineering Research and Science, 3 (2). pp. 65-68.

Afolalu, Sunday A. and Salawu, Enesi Y. and Oluyemi, Kehinde and Ayuba, Samuel U. and Ihebom, Ikechi V. and Elewa, Remilekun R. (2018) Failure Mode and Effect Analysis a Tool for Reliability Evaluation: Review. European Journal of Engineering Research and Science, 4 (3). pp. 65-66.

Afolalu, Sunday A. and Ayuba, Samuel U. and Ihebom, Ikechi V. and Elewa, Remilekun R. and Oluyemi, Kehinde (2018) ROLE OF RELIABILITY MANAGEMENT TOOLS AND DOCUMENTATIONS- A REVIEW. Global Journal of EngineeringScience and Research Management, 5 (3). p. 39. ISSN 2349-4506

Salawu, Enesi Y. and Okokpujie, Imhade P. and Afolalu, Sunday A. and Ajayi, O. O. and Azeta, Joseph (2018) INVESTIGATION OF PRODUCTION OUTPUT FOR IMPROVEMENT. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 915-922. ISSN 2249-6890

YEKINI, SALAWU ENESI and Okokpujie, Imhade P. and Afolalu, Sunday A. and Ajayi, O. O. and Azeta, Joseph (2018) INVESTIGATION OF PRODUCTION OUTPUT FOR IMPROVEMENT. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 915-922. ISSN 2249-8001

Okokpujie , Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O and Okonkwo , Ugochukwu C. and Orodu, Kale B. and Ikumapayi, O. M. (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ajayi, O. O. and Afolalu, Sunday A. and Fajobi, M. A. (2018) MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF DUCTILE IRON PRODUCED FROM FUEL - FIRED ROTARY FURNACE. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 694-704. ISSN 0976-6359

Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ajayi, O. O. and Afolalu, Sunday A. and Fajobi, M. A. and Atanda, P. O. (2018) MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF DUCTILE IRON PRODUCED FROM FUEL - FIRED ROTARY FURNACE. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 694-704. ISSN 0976-6359

Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O and Okonkwo , Ugochukwu C. and Orodu, Kale B. and Ikumapayi, O. M. (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Afolalu, Sunday A. and Abioye, Abiodun A. and Udo, Mfon .O and Adetunji, Olajide R. and Ikumapayi, O. M. and Adejuyigbe, Samuel B. (2018) Data showing the effects of temperature and time variances on nano-additives treatment of mild steel during machining. Data in Brief, 19. pp. 456-461.

Afolalu, Sunday A. and Asonaminasom, Ezekiel H and Ongbali, Samson O. and Abioye, Abiodun A. and Udo, Mfon .O and Salawu, Enesi Y. (2018) Dataset on experimental investigation of optimum carburizing temperature and holding time of bi-nano additives treatment of AISI 5130 steel. Data in Brief, 19. pp. 2279-2283.

Afolalu, Sunday A. and Asonaminasom, Ezekiel H and Ongbali, Samson O. and Abioye, Abiodun A. and Udo, Mfon .O and Salawu, Enesi Y. (2018) Dataset on experimental investigation of optimum carburizing temperature and holdingtime of bi-nano additives treatment of AISI 5130 steel. Data in Brief, 19. pp. 2279-2283.

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Okokpujie, Imhade P. and Asere, A.A. and Oyekunle, J.A and Afolalu, Sunday A. and Abioye, Abiodun A. (2018) Effects of Emission Characteristics on Elemental Composition of Selected PVC Ceiling Materials. Materials Focus, 7. pp. 1-7.

Dirisu, Joy Favour and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Okokpujie, Imhade P. and Asere, A.A. and Oyekunle, J.A and Afolalu, Sunday A. and Abioye, Abiodun A. (2018) Effects of Emission Characteristics on Elemental Composition of Selected PVC Ceiling Materials. Materials Focus, 7. pp. 1-7.

Afolalu, Sunday A. and Ihebom, Ikechi V. and Elewa, Remilekun R. and Ayuba, Samuel U. and Oluyemi, Kehinde (2018) HYBRID METHOD IN THE RELIABILITY ALLOCATION IN AN INDUSTRY-A REVIEW. International Journal Of Advanced Research (IJAR), 6 (3). pp. 770-773. ISSN 2320-5407

Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Dirisu, Joy Favour and Asere, A.A. and Oyekunle, J.A and Ajayi, O. O. and Afolalu, Sunday A. and Joseph, O. O and Abioye, Abiodun A. (2017) Comparison of the Elemental Structure and Emission Characteristics of Selected PVC and Non PVC Ceiling Materials Available in Nigerian Markets. International Journal of Applied Engineering Research, 12 (23). pp. 14755-14758. ISSN 0973-4562

Dirisu, J. O. and Asere, A.A. and Oyekunle, J.A and Adewole, B.Z and Ajayi , Oluseyi O. and Afolalu, Sunday A. and Joseph, O. O and Abioye, Abiodun A. (2017) Comparison of the Elemental Structure and Emission Characteristics of Selected PVC and Non PVC Ceiling Materials Available in Nigerian Markets. International Journal of Applied Engineering Research, 12 (23). pp. 13755-13758. ISSN 0973-4562

Orisanmi , B.O and Afolalu, Sunday A. and Adetunji, Olajide R. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Akinyemi, Opeyemi and Abioye, Oluwabunmi P. (2017) Cost of Corrosion of Metallic Products in Federal University of Agriculture, Abeokuta. International Journal of Applied Engineering, 12 (24). pp. 14141-14147. ISSN 0973-4562

Orisanmi , B.O and Afolalu, Sunday A. and Adetunji, Olajide R. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Akinyemi, Opeyemi and Abioye, Oluwabunmi P. (2017) Cost of Corrosion of Metallic Products in Federal University of Agriculture, Abeokuta. International Journal of Applied Engineering Research, 12 (24). pp. 14141-14147. ISSN 0973-4562

Afolalu, Sunday A. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Udo, Mfon .O and Adetunji, Olajide R. and Ikumapayi, Omolayo M. (2017) Experimental Analysis of the Wear Properties of Carburized HSS (ASTM A600) Cutting Tool. International Journal of Applied Engineering Research, 12 (19). pp. 8995-9003. ISSN 0973-4562

Afolalu, Sunday A. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Udo, Mfon .O and Adetunji, Olajide R. and Ikumapayi, O. M. (2017) Experimental Analysis of the Wear Properties of Carburized HSS (ASTM A600) Cutting Tool. International Journal of Applied Engineering Research, 12 (19). pp. 8995-9003. ISSN 0973-4562

Afolalu, Sunday A. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Udo, Mfon .O and Adetunji, Olajide R. and Ikumapayi, O. M. (2017) Experimental Analysis of the Wear Properties of Carburized HSS (ASTM A600) Cutting Tool. International Journal of Applied Engineering Research, 12 (19). pp. 8995-9003. ISSN 0973-4562

Okokpujie, Imhade P. and Ikumapayi, O. M. and Okonkwo , Ugochukwu C. and Salawu, Enesi Y. and Afolalu, Sunday A. and Dirisu, Joseph O. and Nwoke , Obinna N. and Ajayi, O. O. (2017) Experimental and Mathematical Modeling for Prediction of Tool Wear on the Machining of Aluminium 6061 Alloy by High Speed Steel Tools. Open Eng, 7. pp. 461-469.

Abioye, Abiodun A. and Atanda, P. O. and Abioye, Oluwabunmi P. and Afolalu, Sunday A. and Dirisu, Joy Favour (2017) Microstructural Characterization and Some Mechanical Behaviour of Low Manganese Austempered Ferritic Ductile Iron. International Journal of Applied Engineering Research, 12 (23). pp. 14435-14441. ISSN 0973-4562

Abioye, Abiodun A. and Atanda, P. O. and Abioye, Oluwabunmi P. and Afolalu, Sunday A. and Dirisu, J. O. (2017) Microstructural Characterization and Some Mechanical Behaviour of Low Manganese Austempered Ferritic Ductile Iron. International Journal of Applied Engineering Research, 12 (23). pp. 14435-14441. ISSN 0973-4562

Adetunji, Olajide R. and Ude, Onwuka O. and Kuye, Sidikat I. and Dare, E.O and Alamu, Kamol O. and Afolalu, Sunday A. (2016) Potentiodynamic Polarization of Brass, Stainless and Coated Mild Steel in 1M Sodium Chloride Solution. International Journal of Engineering Research in Africa, 23. pp. 1-6. ISSN 1663-4144

Adetunji, Olajide R. and Musa, A. A. and Afolalu, Sunday A. (2015) Computational Modelling of Chromium Steel in High Temperature Applications. International Journal of Innovation and Applied Studies, 12 (4). pp. 1015-1021. ISSN 2028-9324

Afolalu, Sunday A. and Adejuyigbe, Samuel B. and Adetunji, Olajide R. and Olusola, O. I. (2015) Production of Cutting Tools from Recycled Steel with Palm Kernel Shell as Carbon Additives. International Journal of Innovation and Applied Studies, 12 (1). pp. 110-122. ISSN 2028-9324

Adetunji, Olajide R. and Adegbola, A.O and Afolalu, Sunday A. (2015) COMPARATIVE STUDY OF CASE-HARDENING AND WATER-QUENCHING OF MILD STEEL ROD ON ITS MECHANICAL PROPERTIES. International Journal of Advance Research, IJOAR .org, 3 (6). pp. 1-9. ISSN 2320-9135

Ikumapayi, O. M. and Ojolo, S.J and Afolalu, Sunday A. (2015) EXPERIMENTAL AND THEORETICAL INVESTIGATION OF TENSILE STRESS DISTRIBUTION DURING ALUMINIUM WIRE DRAWING. European Scientific Journal, 11 (18). pp. 86-102. ISSN 1857- 7431

Afolalu, Sunday A. and Adejuyigbe, Samuel B. and Adetunji, Olajide R. and Olusola, O. I. (2015) EFFECTS OF CARBURIZATION ON MECHANICAL PROPERTIES OF RECYCLED STEEL WITH PERM KERNEL SHELL (PKS) AS CARBON ADDITIVES. International Journal of Advance Research, 3 (5). pp. 1-7. ISSN 2320-9135

Afolalu, Sunday A. and Adejuyigbe, Samuel B. and Adetunji, Olajide R. (2015) Impacts of Carburizing Temperature and Holding Time on Wear of High Speed Steel Cutting Tools. International Journal of Scientific & Engineering Research, 6 (5). pp. 905-909. ISSN 2229-5518

Afolalu, Sunday A. and Adejuyigbe, Samuel B. and Adetunji, Olajide R. (2015) Impacts of Carburizing Temperature and Holding Time on Wear of High Speed Steel Cutting Tools. International Journal of Scientific & Engineering Research, 6 (5). pp. 905-909. ISSN 2229-5518

Afolalu, Sunday A. and Ajayi, O. O. and Ikumapayi, O. M. and Adejuyigbe, Samuel B. (2015) Modeling and Simulation of Wave load on Periodic Support for Isolation system of offshore platform. International Journal of Scientific & Engineering Research, 6 (5). pp. 441-447. ISSN 2229-5518

Oyinbo, S. T. and Ikumapayi, O. M. and Ajiboye, J.S and Afolalu, Sunday A. (2015) Numerical Simulation of Axisymmetric and Asymmetric Extrusion Process Using Finite Element Method. International Journal of Scientific & Engineering Research, 6 (6). p. 1246. ISSN 2229-5518

Book Section

Ajayi, O. O. and Omowa, Olasubomi F. and Abioye, Oluwabunmi P. and Omotosho, Olugbenga Adeshola and Akinlabi, Esther T. and Akinlabi, Stephen A. and Abioye, Abiodun A. and Owoeye, T. F. and Afolalu, Sunday A. Finite Element Modelling of Electrokinetic Deposition of Zinc on Mild Steel with ZnO-Citrus sinensis as Nano-Additive. In: CFD Modeling and Simulation in Materials Processing 2018. The Minerals, Metals & Materials Society Spinger, pp. 199-211. ISBN 978-3-319-72059-3

Conference or Workshop Item

Salawu, Enesi Y. and Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Agarana, M. C. (2018) Numerical Modeling and Evaluation of Involute Curve Length of a Spur Gear Tooth to Maintain Constant Velocity Ratio While in Motion. In: Proceedings of the International MultiConference of Engineers and Computer Scientists, March 14-16, 2018, Hong Kong.

Ikumapayi, O. M. and Okokpujie, Imhade P. and Afolalu, Sunday A. and Ajayi, O. O. and Akilabi, E. T. and Bodunde, O. P (2018) Effects of Quenchants on Impact Strength of Single-Vee Butt Welded Joint of Mild Steel. In: The 1st International Conference on Engineering for Sustainable World, 2018.

Ajayi, O. O. and Omowa, Olasubomi F. and Omotosho, Olugbenga Adeshola and Abioye, Oluwabunmi P. and Akinlabi, Esther T. and Akinlabi, Stephen A. and Abioye, Abiodun A. and Owoeye, Taiwo Felicia and Afolalu, Sunday A. (2018) Experimental Investigation of the Effect of ZnO-Citrus sinensis Nano-additive on the Electrokinetic Deposition of Zinc on Mild Steel in Acid Chloride. In: 147th Annual Meeting & Exhibition Supplemental Proceedings.

Ajayi, O. O. and Omowa, Olasubomi F. and Abioye, Oluwabunmi P. and Omotosho, Olugbenga Adeshola and Akinlabi, Esther T. and Akinlabi, Stephen A. and Abioye, Abiodun A. and Owoeye, T. F. and Afolalu, Sunday A. (2018) Finite Element Modelling of Electrokinetic Deposition of Zinc on Mild Steel with ZnO-Citrus sinensis as Nano-Additive. In: TMS 2018: CFD Modeling and Simulation in Materials Processing, 13 January 2018, Online:.

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, A. A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel (ASTM A36). In: 6th International Conference on Nano and Materials Science, 2018.

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel(ASTM A36). In: International Conference on Nano and Materials Science.

Udo, Mfon .O and Esezobor, D. E. and Afolalu, Sunday A. and Onovo, Harrison and Ongbali, Samson O. and Okokpujie, Imhade P. (2018) Investigation of Balling Characteristics of Mixture of Iron Oxide Bearing Wastes and Iron Ore Concentrates. In: IOP Conf. Series: Materials Science and Engineering.

Afolalu, Sunday A. and Abioye, Abiodun A. and Dirisu, J. O. and Okokpujie, Imhade P. and Ajayi, O. O. and Adetunji, Olajide R. (2018) Investigation of Wear Land and Rate of Locally Made HSS Cutting Tool. In: International Conference on Nano and Materials Science AIP Conf..

Ongbali, Samson O. and Igboanugo, A. C. and Afolalu, Sunday A. and Udo, Mfon .O and Okokpujie, Imhade P. (2018) Model Selection Process in Time Series Analysis of Production System with Random Output. In: IOP Conf. Series: Materials Science and Engineering.

Abioye, Abiodun A. and Atanda, P. O. and Abioye, Oluwabunmi P. and Akinlabi, Stephen A. and Akinlabi, Esther T. and Bolu, Christian and Afolalu, Sunday A. and Ajayi, O. O. and Ohijeagbon, I. O. (2018) A Review on Automotive Industries and Foundries in Nigeria. In: IOP Conf. Series: Materials Science and Engineering.

Afolalu, Sunday A. and Oluwaseyifunmi, Orenuga and Ongbali, Samson O. and Abioye, Abiodun A. and Okokpujie, Imhade P. and Olamilekan, Oloyede R (2018) The Study of the Impact of Nano Carbon Additives on Astm A53 Mild Steel During Machining. In: IOP Conf. Series: Materials Science and Engineering.

Afolalu, Sunday A. and Okokpujie, Imhade P. and Salawu, Enesi Y. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ikumapayi, O. M. (2018) Study of the Performances of Nano-Case Treatment Cutting Tools on Carbon Steel Work Material during Turning Operation. In: International Conference on Nano and Materials Science.

Afolalu, Sunday A. and Okokpujie, Imhade P. and Salawu, Enesi Y. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ikumapayi, O. M. (2018) Study of the Performances of Nano-Case Treatment Cutting Tools on Carbon Steel Work Material during Turning Operation. In: 6th International Conference on Nano and Materials Science AIP Conf. Proc.

This list was generated on Mon Dec 10 10:20:51 2018 PST.