Items where Author is "Ajayi, O. O."

Group by: Item Type | No Grouping

Number of items: 189.

Edun, B.M and Ajayi, O. O. and Babalola, P.O. and Salawu, Enesi Y. (2023) Effect of Case Hardening on the Wear and hardness properties of Medium Carbon Steel for Bone Crushing Application. HELIYON.

Ajayi, O. O. and Unser, Logan and Ojo, Joseph O. (2023) Implicit rule for the application of the 2-parameters RANS turbulence models to solve flow problems around wind turbine rotor profiles. Cleaner Engineering and Technology.

Ehi‐Okoebor, Clifford and Salawu, Enesi Y. and Afolalu, Sunday A. and Ajayi, O. O. and Kayode, Joseph F. and Lawal, Sunday L. (2023) Importance of hybrid organic carburizers on the Mechanical properties of mild steel: A Review. In: International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB‐SDG), 05‐07 April 2023, Omu‐Aran, Nigeria.

Ogbonnaya, Mercy and Ajayi, O. O. and Waheed, M. A. (2023) Influence of Refrigerant Type, Nanoparticle’s Concentration and Size on the Performance and Exergy Efficiency of the Vapour Compression Refrigeration System Using Al2O3 Based Nanolubricant. Journal of Nanofluids, 12. pp. 712-722.

Leramo, R.O. and Adekoya, Lawson O. and Kilanko, O. O and Oyedepo, Sunday Olayinka and Eluwa, Stephen E. and Babalola, P.O. and Adeosun, Samson O. and Leramo, Nicholas T. and Aiyedun, Peter O. and Ohunakin, O.S. and Ajayi, O. O. and Fayomi, O. S. I (2022) A comparative analysis of the chemical composition and compliance level to established standards of concrete reinforcement steel rods rolled in Nigeria. Heliyon, 8 (6).

Edun, B.M and Ajayi, O. O. and Babalola, P.O. (2022) Failure Mode and Cost Effect Analysis of a Model Bone Crushing Hammer. Key Engineering Materials, 917. pp. 63-69.

Ogbonnaya, Mercy and Onoroh, Francis and Ajayi, O. O. and Agun, Achem Daniel and Toluwalagbara, Samuel (2022) The Influence of Nanoparticle Additive on the Thermophysical Properties of Bionanolubricant Using Castor Oil. Scientific.Net. pp. 228-238.

Salawu, Enesi Y. and Adediran, A. A. and Ajayi, O. O. and Inegbenebor, A.O. and Dirisu, J. O. (2022) On the analyses of carbon atom diffused into grey cast iron during carburisation process. scientific reports.

Owoeye, T. F. and Akinlabu, Deborah Kehinde and Ajayi, O. O. and Afolalu, Sunday A. and Popoola, J.O and Ajani, Olayinka O. (2022) Phytochemical constituents and proximate analysis of dry pineapple peels. In: International Conference on Science and Sustainable Development.

Orhevba, Amanda O. and Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Leramo, R.O. and Dirisu, J. O. and Afolalu, Sunday A. (2022) Rinser Machine and the Dynamics-based Failure Analysis for Spur Gear Fault Detection: A Forensic Review. In: International Conference on Energy and Sustainable Environment.

Ajayi, O. O. and Mokryani, Geev and Edun, B.M (2022) Sustainable energy for national climate change, food security and employment opportunities: Implications for Nigeria. Fuel Communications.

Ajayi, O. O. and Mokryani, Geev and Edun, B.M (2022) Sustainable energy for national climate change, food security and employment opportunities: Implications for Nigeria. Fuel Communications, 10.

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Joseph, O. O and Akinlabi, Esther T. and Babalola, P.O. and Udoye, Nduka Ekene and Ajayi, O. O. and Aworinde, Abraham K. and Banjo, SolomonO. and Oluwasegun, K.M (2022) Thermal-emission assessment of building ceilings from agro-industrial wastes. Fuel Communications, 10.

Ogbonnaya, Mercy and Ajayi, O. O. and Waheed, M. A. and Salawu, Enesi Y. (2022) Thermophysical Properties and Heat Transfer Characteristics of Nanorefrigerants: Some Existing Results and Areas for Further Researches. Scientific.Net, 917. pp. 207-227.

Dirisu, J. O. and Joseph, O. O and Babalola, P.O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Oluwasegun, K.M and Nduka, Udoye and Ajayi, O. O. and Ajibero, Michael (2022) Utilization of Waste Materials for Eco-Friendly Building Ceilings: An Overview. Key Engineering Materials. pp. 285-295.

Abodunrin, T.J and Emetere, Moses and Ajayi, O. O. (2021) Comparison of Energy Performance Metrics of Photovoltaics Using IPAT Sustainability Model. In: International Conference on Vehicle Technology and Intelligent Transport Systems, 17 October 2021, Online.

Francis, Muyiwa F. and Ajayi, O. O. and Ojo, Joseph O. (2021) Development of a novel airfoil for low wind speed vertical axis wind turbine using QBlade simulation tool. Fuel Communications, 9.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Afolalu, Sunday A. and Edun, B.M (2021) Dynamic Simulation of Gear System Based on 2D Space Multibody Physics: A Sustainable Gear Design Approach. In: International Conference on Engineering for Sustainable World.

Banjo, SolomonO. and Ajayi, O. O. and Bolaji, Bukola O. and Emetere, Moses and Fayomi, O. S. I and Udoye, Nduka Ekene and Olatunde, A.O. and Akinlabu, K. (2021) Evaluation analysis of a developed solar refrigerator using conventional refrigerant for rural and medical applications. In: International Conference on Energy and Sustainable Environment, 2021, Online.

Abodunrin, T.J and Emetere, Moses and Ajayi, O. O. and Popoola, A. P. I. and Popoola, O. and Uyor, U. O. (2021) Exploring Bandgap Engineering on Photovoltaics and their Possible Economic implications. In: International Conference on Engineering for Sustainable World, 2021, Online.

Abodunrin, T.J and Ajayi, O. O. and Emetere, Moses and Popoola, A. P. I. and Popoola, O. and Uyor, U. O. (2021) Interphase Dynamics of photoanode in Micro-energy generation in Photovoltaics. In: International Conference on Engineering for Sustainable World, 2021, Online.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Afolalu, Sunday A. and Aroyinbo, A. (2021) Material Selection and Processing Techniques: Crucial Factors for Gear Engineering. In: International Conference on Engineering for Sustainable World, 2021, Online.

Salawu, Enesi Y. and Ajayi, O. O. and Okeniyi, Joshua Olusegun and Inegbenebor, A.O. and Afolalu, Sunday A. and Ongbali, Samson O. and Banjo, SolomonO. (2021) On the prediction of power loss in helical gearbox via simulation approach. Cleaner Engineering and Technology, 3. pp. 1-6.

Edun, B.M and Ajayi, O. O. and Babalola, P.O. and Salawu, Enesi Y. (2021) effect of Heat Treatment Method on the Fatigue Behaviour of Hammermill: A Review. In: International Conference on Engineering for Sustainable World, 2021, Online.

Fajobi, M. A. and Salawu, Enesi Y. and Azeta, Joseph and Dirisu, J. O. and Ajayi, O. O. and Onwordi, Patrick Nwanne (2020) Development of a Human Powered Pedal Washing MACHINE. In: 6th International Conference on Advanced Engineering and Technology, 2020, Online.

Fajobi, M. A. and Salawu, Enesi Y. and Azeta, Joseph and Dirisu, Joy Favour and Ajayi, O. O. and Onwordi, Patrick Nwanne (2020) Development of a Human Powered Pedal Washing MACHINE. In: 6th International Conference on Advanced Engineering and Technology, 2020, Online.

Edun, B.M and Ajayi, O. O. and Babalola, P.O. and Salawu, Enesi Y. (2020) Effect of Heat Treatment Methods on the Fatigue Behaviour of Hammermill: A Review. In: ICISW�.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Popoola, A. P. I. and Akinlabi, Esther T. and Omotosho, Olugbenga Adeshola and Uyor, U. O. (2020) Electrochemical study and gravimetric behaviour of gray cast iron in varying concentrations of blends as alternative material for gears in ethanol environment. Journal of Materials Research and Technology, 9 (4). pp. 7529-7539.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Akinlabi, Esther T. and Popoola, A. P. I. and Uyor, U. O. (2020) Investigation of the effects of selected bio-based carburising agents on mechanical and microstructural characteristics of gray cast iron. Heliyon.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, S. (2020) Material Selection and Processing Techniques: Crucial Factors for Gear Engineering. In: International Conference on Engineering for Sustainable World.

Afolalu, Sunday A. and Oladipupo, Segun Isaac and Ongbali, Samson O. and Abioye, Abiodun A. and Abdulkareem, Ademola and Udo, Mfon .O and Ajayi, O. O. (2020) Queueing Theory an Index Factor for Production Inventory Control in Automotive Industry—A Review. In: Trends in Manufacturing and Engineering Management, 2020, Online.

Salawu, Enesi Y. and Ajayi, O. O. and Fajobi, M. A. and Ishola, Felix and Azeta, Joseph (2020) Structural Fabrication and Dynamic Simulation of Stress of a Vibrosieve for Efficient Industrial Applications. Advances in Manufacturing Engineering. pp. 715-724.

Sanni, Samuel Eshorame and Ovie, Frederick-Simon and Ajayi, O. O. and Agboola, Oluranti (2019) Effect of controlled pH and concentrations of copper sulphate and silver nitrate solutions during nanoparticles synthesis towards modifying compressor oil yield stress and lubricity for improved refrigeration. Heat and Mass Transfer , 56 (3). ISSN 0947-7411

Akinsiku, A.A. and Ajanaku, K. O. and Adekoya, J. A. and Ajayi, O. O. and Emetere, Moses and Dare, E.O (2019) Combined green synthesis and theoretical study of Ag/Co nanoparticles from biomass materials. Combined green synthesis and theoretical study of Ag/Co nanoparticles from biomass materials. pp. 125-643. ISSN 1432-0630

Enesi, Salawu Y and Emuowhochere, Oghenevwegba and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Esther T. and Akinlabi, S.T (2019) Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach. In: 148th Annual Meeting & Exhibition .

Ojo, T.P. and Ajayi, O. O. and Balogun, O.B. (2019) Microbiological and Parasitological Assessment of Vegetables Sold At Owena Ijesa Market Osun State, Nigeria. International Journal of Recent Innovations in Academic Research, 3 (2). 266-274 . ISSN 2635-3040

Ajayi, O. O. and Covenant University, SPS Seminar & Workshop Series (2019) AGENCIES FOR RESEARCH FUNDING IN SCIENCE AND ENGINEERING. In: SPS Seminar and Workshop Series, 13th February 2019, Covenant University Ota, Nigeria.

Abodunrin, T.J and Boyo, A. O. and Usikalu, M.R. and Ajayi, O. O. (2019) Analysis of Tyndall effect on output performance of P.macrophylla Benth. dye-sensitized solar cells. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Afolalu, Sunday A. (2019) Constitutive Model to Analyse the effect of Variation in Temperature Distribution on the Rate of Heat Transfer around a Spur Gear Tooth. In: International Conference on Sustainable Materials Processing and Manufacturing. (In Press)

Enesi, Salawu Y and Ajayi, O. O. and Inegbenebor, A.O. and Fayomi, O. S. I and Popoola, A. P. I. and Uyor, U. O. (2019) Corrosion Behavior of Mild Steel in Different Concentrations of Ethanol Beverages. Journal of Bio- and Tribo-Corrosion, 6 (2).

Ohijeagbon, O. D. and Ajayi, O. O. and Waheed, O. and Adekojo, M. and Salawu, Enesi Y. and Oyawale, Fetus A (2019) Design of Optimal Hybrid Renewable Energy System for Sustainable Power Supply to Isolated-grid Communities in North Central, Nigeria. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Salawu, Enesi Y. and Oghenevwegba, Emuowhochere and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Esther T. and Akinlabi, S.T (2019) Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach. In: 148th Annual Meeting & Exhibition Supplemental .

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Popoola, A. P. I. and Uyor, U. O. (2019) Effects of Heat Treatment Techniques on the Fatigue Behaviour of Steel Gears: A Review. In: International Conference on Engineering for Sustainable World, 2019, Online.

Abodunrin, T.J and Ajayi, O. O. and Emetere, Moses and Popoola, A. P. I. and Uyor, U. O. and Popoola, O. (2019) Electron Tunneling, Performance Analysis and Prospect of Micro-energy Generation in Ringwood (Syzygium Anisatum) Dye-sensitized Solar Cell. In: Proceedings of the International MultiConference of Engineers and Computer Scientists, March 13-15, 2019, Hong Kong.

Afolalu, Sunday A. and Efekodha, Great E. and Ongbali, Samson O. and Abioye, Abiodun A. and Salawu, Enesi Y. and Ajayi, O. O. and Oluwabunmi, Abioye P. (2019) Experimental Analysis of the Effect of Tri-Nano Additives on Wear Rate of Mild Steel during Machining. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. (2019) Forensic Investigation of a Failed Intermediate Starwheel Spur Gear Tooth in a Filler Machine. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Akinwumi, I. I. and Ajayi, O. O. and Joshua, Opeyemi and Sani, R and Olofinnade, O. M. and Awoyera, P. O. and Ogundairo, T. O. and OGUNWOLE, ADEWALE DANIEL and Afolayan, O. D. (2019) Housing crisis: Waste glass-stabilized clay for use as fired clay bricks. IOP Conf. Series: Materials Science and Engineering, 640.

Agarana, M. C. and Ajayi, O. O. and Akinwumi, I. I. (2019) INTEGER PROGRAMMING ALGORITHM FOR PUBLIC TRANSPORT SYSTEM IN SUB-SAHARAN AFRICAN CITIES. WIT Transactions on The Built Environment, 182. pp. 339-350. ISSN 1743-3509

Akinwumi, I. I. and Ajayi, O. O. and Agarana, M. C. and Ogbiye, S. A. and Ojuri , O. O. and David, A. O. (2019) INVESTIGATION OF CALCIUM CARBIDE RESIDUE AS A STABILIZER FOR TROPICAL SAND USED AS PAVEMENT MATERIAL. WIT Transactions on The Built Environment. pp. 285-294.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Akinlabi, Esther T. and Ishola, Felix (2019) Influence of Von Mises Stress on the Deformation behaviour of a Pinion Spur Gear under Cyclic Loading in a Bottling Machine: An Approach for predicting surface Fatigue failure in Gears. International Journal of Engineering Research and Technology, 12 (12). pp. 2207-2211. ISSN 0974-3154

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Akinlabi, Esther T. (2019) Influence of pulverized palm kernel and egg shell additives on the hardness, coefficient of friction and microstructure of grey cast iron material for advance applications. Results in Engineering.

Abodunrin, T.J and Boyo, A. O. and Usikalu, M.R. and Ajayi, O. O. (2019) Investigation of effect of batch-separation on the micro-energy genration in M.indica L. dye-sensitized Sola Cells. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Ajayi, O. O. and Ukasoanya, Daniel E. and Ogbonnaya, Mercy and Salawu, Enesi Y. and Okokpujie, Imhade P. and Akinlabi, Stephen A. and Akinlabi, Esther T. and Owoeye, T. F. (2019) Investigation of the Effect of R134a/Al2O3 –Nanofluid on the Performance of a Domestic Vapour Compression Refrigeration System. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. (2019) MICRO-STRUCTURAL AND MECHANICAL CHARACTERIZATION OF PULVERIZED WOOD CHARCOAL AND EGG-SHELL AS ORGANIC CARBON ADDITIVES FOR GREY CAST IRON CARBURIZATION. International Journal of Mechanical and Production Engineering Research and Development, 9 (6). pp. 391-398. ISSN 2249–8001

Ajayi, O. O. and Agarana, M. C. and Akinwumi, I. I. and Okokpujie, Imhade P. and Salawu, Enesi Y. and Abioye, Abiodun A. and Afolalu, Sunday A. and Leramo, R.O. (2019) MODELLING RATE OF TRAFFIC-INDUCED BUILDING VIBRATIONS IN SANGO-OTA, NIGERIA: AN ASSUMPTION BASED ANALYSIS. WIT Transactions on The Built Environment, 182. pp. 303-313. ISSN 1743-3509

Fayomi, O. S. I and AKANDE, I.G and Ohunakin, O.S. and Ajayi, O. O. and Oyedepo, Sunday Olayinka (2019) Organizational challenges in the adoption of wind energy in Africa. In: AIP Conference Proceedings, 2019, Online.

Banjo, SolomonO. and Bolaji, Bukola O. and Ajayi, O. O. and Babalola, P.O. and Ibhadode, Osagie and Onokwai, Anthony O. (2019) Performance enhancement using appropriate mass charge of R600a in a developed domestic refrigerator. In: International Conference on Energy and Sustainable Environment, 2019, Online.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. (2019) Predictive Modelling of a K-Unit Bottling Plants for Reliability Improvement. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. (2019) TURBULENCE FLOW SIMULATION OF MOLTEN METALS IN RUNNERS FOR DEFECT CONTROL IN CASTING OF A SPUR GEAR BLANK. International Journal of Mechanical Engineering and Technology, 10 (1). pp. 1921-1933. ISSN 0976-6359

Azeta, Joseph and Salawu, Enesi Y. and Fajobi, M. A. and Ajayi, O. O. and Dirisu, Joy Favour and Onwardi, Patrick N. and Aworinde, Abraham K. (2019) Technical Innovations for Developing Countries: The Case of a Human‐Powered Fruit Blender. International Journal of Mechanical Engineering and Technology, 10 (3). pp. 673-679.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Afolalu, Sunday A. (2019) Temperature Distribution on the Rate of Heat Transfer around a Spur Gear Tooth. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Abodunrin, T.J and Boyo, A. O. and Usikalu, M.R. and Emetere, Moses and Ajayi, O. O. and Kotsedi, Chester and Nuru, Zebib and Malik, M and Oghonyon, J. G. (2018) Influence of n-Mosfet transistor on dye-sensitized solar cell efficiency. Heliyon.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Afolalu, Sunday A. and Ongbali, Samson O. (2018) PARETO ANALYSIS OF PRODUCT QUALITY FAILURES AND COST EFFECTS IN BOTTLING MACHINES-A LEAN THINKING SOLUTION FOR ALCOHOL INDUSTRY. International Journal of Mechanical Engineering and Technology, 9 (11). pp. 2380-2388. ISSN 0976-6340 and ISSN Online: 0976-6359

Salawu, Enesi Y. and Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Agarana, M. C. (2018) Numerical Modeling and Evaluation of Involute Curve Length of a Spur Gear Tooth to Maintain Constant Velocity Ratio While in Motion. In: Proceedings of the International MultiConference of Engineers and Computer Scientists, March 14-16, 2018, Hong Kong.

Salawu, Enesi Y. and Okokpujie, Imhade P. and Afolalu, Sunday A. and Ajayi, O. O. and Azeta, Joseph (2018) INVESTIGATION OF PRODUCTION OUTPUT FOR IMPROVEMENT. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 915-922. ISSN 2249-6890

Enesi, Salawu Y and Okokpujie, Imhade P. and Afolalu, Sunday A. and Ajayi, O. O. and Azeta, Joseph (2018) INVESTIGATION OF PRODUCTION OUTPUT FOR IMPROVEMENT. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 915-922. ISSN 2249-8001

Okokpujie , Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O and Okonkwo , Ugochukwu C. and Orodu, Kale B. and Ikumapayi, O. M. (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ajayi, O. O. and Afolalu, Sunday A. and Fajobi, M. A. (2018) MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF DUCTILE IRON PRODUCED FROM FUEL - FIRED ROTARY FURNACE. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 694-704. ISSN 0976-6359

Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ajayi, O. O. and Afolalu, Sunday A. and Fajobi, M. A. and Atanda, P. O. (2018) MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF DUCTILE IRON PRODUCED FROM FUEL - FIRED ROTARY FURNACE. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 694-704. ISSN 0976-6359

Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O and Okonkwo , Ugochukwu C. and Orodu, Kale B. and Ikumapayi, O. M. (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Salawu, Enesi Y. and Okokpujie, Imhade P. and Ajayi, O. O. and Agarana, M. C. (2018) Analytical Technique for the Determination of Hoop Stress and Radial Stress on the Tooth Spur Gear under Vertical Loading in a Food Packaging Machine. In: International MultiConference of Engineers and Computer Scientists 2018 Vol II, March 14-16, 2018, Hong Kong.

Ohijeagbon, I. O. and lasode, O.A. and Adebayo, Segun and Ajayi, O. O. and Omotosho, Olugbenga Adeshola (2018) Data on drying kinetics of a semi-automated gas-fired fish dryer. Data in Brief. pp. 641-647.

Ikumapayi, O. M. and Okokpujie, Imhade P. and Afolalu, Sunday A. and Ajayi, O. O. and Akilabi, E. T. and Bodunde, O. P (2018) Effects of Quenchants on Impact Strength of Single-Vee Butt Welded Joint of Mild Steel. In: The 1st International Conference on Engineering for Sustainable World, 2018.

Olatunji, Obafemi and Akinlabi, Stephen A. and Ajayi, O. O. and Abioye, Abiodun A. and Ishola, Felix and Peter, Mashinini and Madushele, Nkosinathi (2018) Electric Power Crisis in Nigeria: A Strategic Call for Change of Focus to Renewable Sources. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Ajayi, O. O. and Ukasoanya, Daniel E. and Owoeye, T. F. and Salawu, Enesi Y. and Ohijeagbon, I. O. and Oyawale, Fetus A and Agarana, M. C. (2018) Experimental Investigation into the Effects of Al-composite Nanolubricants on the Energy and Exergy Performance of Vapour Compression Refrigerator Compressor. In: World Congress on Engineering, July 4-6, 2018, London, U.K..

Ajayi, O. O. and Omowa, Olasubomi F. and Omotosho, Olugbenga Adeshola and Abioye, Oluwabunmi P. and Akinlabi, Esther T. and Akinlabi, Stephen A. and Abioye, Abiodun A. and Owoeye, Taiwo Felicia and Afolalu, Sunday A. (2018) Experimental Investigation of the Effect of ZnO-Citrus sinensis Nano-additive on the Electrokinetic Deposition of Zinc on Mild Steel in Acid Chloride. In: 147th Annual Meeting & Exhibition Supplemental Proceedings.

Ajayi, O. O. and Omowa, Olasubomi F. and Abioye, Oluwabunmi P. and Omotosho, Olugbenga Adeshola and Akinlabi, Esther T. and Akinlabi, Stephen A. and Abioye, Abiodun A. and Owoeye, T. F. and Afolalu, Sunday A. (2018) Finite Element Modelling of Electrokinetic Deposition of Zinc on Mild Steel with ZnO-Citrus sinensis as Nano-Additive. In: TMS 2018: CFD Modeling and Simulation in Materials Processing, 13 January 2018, Online:.

Ajayi, O. O. and Omowa, Olasubomi F. and Abioye, Oluwabunmi P. and Omotosho, Olugbenga Adeshola and Akinlabi, Esther T. and Akinlabi, Stephen A. and Abioye, Abiodun A. and Owoeye, T. F. and Afolalu, Sunday A. (2018) Finite Element Modelling of Electrokinetic Deposition of Zinc on Mild Steel with ZnO-Citrus sinensis as Nano-Additive. In: CFD Modeling and Simulation in Materials Processing 2018. The Minerals, Metals & Materials Society Spinger, pp. 199-211. ISBN 978-3-319-72059-3

Afolalu, Sunday A. and Ongbali, Samson O. and Abioye, Abiodun A. and Ajayi, O. O. and Adelakun, Oluwasegun J and Abdulkareem, Ademola (2018) INVESTIGATION OF EFFECTS OF DAMPED AND NON-DAMPED SYSTEM ON A PLATFORM STRUCTURE. International Journal of Advance Research, 3 (6). pp. 1-9. ISSN 2320-9135

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, A. A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel (ASTM A36). In: 6th International Conference on Nano and Materials Science, 2018.

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel (ASTM A36). In: 6th International Conference on Nano and Materials Science, 2018.

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel(ASTM A36). In: International Conference on Nano and Materials Science.

Afolalu, Sunday A. and Abioye, Abiodun A. and Dirisu, J. O. and Okokpujie, Imhade P. and Ajayi, O. O. and Adetunji, Olajide R. (2018) Investigation of Wear Land and Rate of Locally Made HSS Cutting Tool. In: International Conference on Nano and Materials Science AIP Conf..

Akinwumi, I. I. and Ajayi, O. O. and Agarana, M. C. and Ogbiye, S. A. and Ojuri , O. O. and David, A. O. (2018) Investigation of calcium carbide residue as stabilizer for tropical sand used as pavement material. WIT Transactions on The Built Environment, 182. (In Press)

Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Adeyemi, Olabisi I. and Emagbetere, Eyere and Oreko, Ufuoma B. and Aworinde, Abraham K. and Adeosun, Samson O. and Oyawale, Fetus A and Ishola, Felix and Ajayi, O. O. (2018) Mechanical Characterisation and Modelling of a Pulverised Palm Kernel Shell based Spur Gear. In: International Conference on Industrial Engineering and Operations Management, October 29 – November 1, 2018, Pretoria / Johannesburg, South Africa.

Ishola, Felix and Aworinde, Abraham K. and Ajayi, O. O. and Oyawale, Fetus A and Inegbenebor, A.O. (2018) Parameters for Design and Construction of a Pilot Scale Pyrolysis Gas-Furnace. In: International Conference on Industrial Engineering and Operations Management, October 29 – November 1, 2018, Pretoria / Johannesburg, South Africa.

Okwuobi, Samuel and Ishola, Felix and Ajayi, O. O. and Salawu, Enesi Y. and Aworinde, Abraham K. and Olatunji , Obafemi and Akinlabi, Stephen A. (2018) A Reliability-Centered Maintenance Study for an Individual Section-Forming Machine. Machines, 6 (50).

Abioye, Abiodun A. and Atanda, P. O. and Abioye, Oluwabunmi P. and Akinlabi, Stephen A. and Akinlabi, Esther T. and Bolu, Christian and Afolalu, Sunday A. and Ajayi, O. O. and Ohijeagbon, I. O. (2018) A Review on Automotive Industries and Foundries in Nigeria. In: IOP Conf. Series: Materials Science and Engineering.

Ayomide, B.Orhewere and Ajayi, O. O. and Banjo, SolomonO. and Ajayi, A. A. (2017) Data ontheno-loadperformanceanalysis of atomatopostharveststoragesystem. Data in Brief, 13. pp. 667-674.

Akinyemi, Opeyemi and Alege, P. O. and Ajayi, O. O. and Adediran, Oluwasogo and Urhie, Ese S (2017) A Simulation of the Removal of Fuel Subsidy and the Performance of the Agricultural Sector in Nigeria using a Dynamic Computable General Equilibrium Approach. Covenant Journal of Business & Social Sciences (CJBSS), 8 (1). pp. 60-70.

Nwanya , Stephen and Udofia, J.I and Ajayi, O. O. (2017) Optimization of machine downtime in the plastic manufacturing. Cogent Engineering, 4 (1).

Ajayi, O. O. and Ibia, D.E and Ogbonnaya, Mercy and Attabo, Ameh and Agarana, M. C. (2017) CFD Analysis of Nanorefrigerant through Adiabatic Capillary Tube of Vapour Compression Refrigeration System. Procedia Manufacturing, 7. pp. 688-695. ISSN 2351-9789

Ajayi, O. O. and Abiola , Abatan and Ogbonnaya, Mercy and Agarana, M. C. (2017) Development of Thermomechanical Model for the Analysis of Effects of Friction and Cutting Speed on Temperature Distribution around AISI 316L During Orthogonal Machining. Procedia Manufacturing, 7. pp. 682-687. ISSN 2351-9789

Ajayi, O. O. and Agarana, M. C. and Adeniyi, M.O and Ogbonnaya, Mercy (2017) Modelling and Control of Flow Induced Vibration of Top–Tensioned Marine Risers Using Analytical Methods. Procedia Manufacturing, 7. pp. 609-615. ISSN 2351-9789

Ajayi, O. O. and Agarana, M. C. and Animasaun, T.O (2017) Vibration Analysis of the Low Speed Shaft and Hub of a Wind Turbine Using Sub Structuring Techniques. Procedia Manufacturing, 7. pp. 602-608. ISSN 2351-9789

Omidiora, Segun and Ajayi, O. O. and Eni, A. O. and George, T. O. and Chinedu, S. N. and Omole, D. O. and Iyoha, F. O. and Chiluwa, Innocent (2017) 2017/18 Executive Advance Presentations. 2017/18 Executive Advance. (Unpublished)

Agarana, M. C. and Ajayi, O. O. (2017) Analytical Modelling of Human Arm Locomotion during Dance as a Dynamical Multiple Pendulum System. In: World Congress on Engineering 2017 , July 5-7, 2017, London, U.K..

Oyedepo, Sunday Olayinka and Fagbenle, R. O. and Babarinde, T.O. and Odunfa, K. M. and Leramo, R.O. and Ohunakin, O.S. and Ajayi, O. O. and Babalola, P.O. and Kilanko, O. O and Oyegbile, A.D and Lawson-Jack, D (2017) A COMPARATIVE STUDY ON THE PERFORMANCE OF THE DOMESTIC REFRIGERATOR USINGR600A AND LPG WITH VARYING REFRIGERANT CHARGE AND CAPILLARY TUBE LENGTH. International Journal of Energy for a Clean Environment, 18 (4). pp. 287-302.

Dirisu, Joy Favour and Asere, A.A. and Oyekunle, J.A and Ajayi, O. O. and Afolalu, Sunday A. and Joseph, O. O and Abioye, Abiodun A. (2017) Comparison of the Elemental Structure and Emission Characteristics of Selected PVC and Non PVC Ceiling Materials Available in Nigerian Markets. International Journal of Applied Engineering Research, 12 (23). pp. 14755-14758. ISSN 0973-4562

Okokpujie, Imhade P. and Okokpujie, Kennedy O. and Ajayi, O. O. and Azeta, Joseph and Obinna, Nwoke N. (2017) Design, Construction and Evaluation of a Cylinder Lawn Mower. Journal of Engineering and Applied Sciences. pp. 1254-1260. ISSN 1816-949X

Agarana, M. C. and Ajayi, O. O. (2017) Dynamic Modeling and Analysis of Inverted Pendulum using Lagrangian-Differential Transform Method. In: World Congress on Engineering 2017 , July 5-7, 2017, London, U.K..

Opeyemi, AK and Alege, P. O. and Ajayi, O. O. and Okodua, Henry (2017) Energy Pricing Policy and Environmental Quality in Nigeria: A Dynamic CGE Approach. International Journal of Energy Economics and Policy, 7 (1).

Okokpujie, Imhade P. and Ikumapayi, O. M. and Okonkwo , Ugochukwu C. and Salawu, Enesi Y. and Afolalu, Sunday A. and Dirisu, Joseph O. and Nwoke , Obinna N. and Ajayi, O. O. (2017) Experimental and Mathematical Modeling for Prediction of Tool Wear on the Machining of Aluminium 6061 Alloy by High Speed Steel Tools. Open Eng, 7. pp. 461-469.

Ajayi, O. O. and Ohijeagbon, O. D. and Agarana, M. C. and Attabo, Ameh and Ogbonaya, Mercy (2017) Feasibility and Econometrics Assessment of Standalone and Hybrid RE Facilities for Rural Community Utilization and Embedded Generation in North-West, Nigeria. In: World Congress on Engineering 2017 , July 5-7, 2017, London, U.K..

Agarana, M. C. and Ajayi, O. O. and Emetere, Moses (2017) Lagrangian-Analytical Modelling of Damped Quintuple Pendulum System. In: World Congress on Engineering and Computer Science, October 25-27, 2017, San Francisco, USA.

Abasilim , U. D. and Gberevbie, D.E. and Ajayi, O. O. and IFALOYE, O. R (2017) THE WHAT IS AND WHY OF COMMUNITY POLICING IN NIGERIA. In: 1st Multidimensional Conference on Critical National Issues: Restructuring Federalism and Governance in Nigeria, November 28th - 30th, 2017, Crawford University, Faith City, Igbesa, Ogun State.

Omole, D. O. and Azubuike, T. U. and Ogbiye, S. A. and Ede, A. N. and Ajayi, O. O. (2016) Causative Factors of Indoor Air Pollution in Nigerian Households. In: 3rd International Conference On African Development Issues (CU-ICADI), May 9- May 11 2016, Covenant University, Ota, Nigeria.

Onawumi, A.S. and Oyawale, Fetus A and Dunmade, I.S. and Ajayi, O. O. and Obasanya, O. O (2016) Comfort Analysis of Commercial Motorcyclists Using Protective Helmets Operating in Ogbomoso, Oyo State Nigeria. In: 3rd International Conference On African Development Issues (CU-ICADI), May 9- May 11 2016, Covenant University, Ota, Nigeria.

Ajayi, O. O. and Omole, D. O. and Emenike, PraiseGod C (2016) Use of Agricultural Wastes and Limestone for the Removal of Iron from Drinking Water. In: 3rd International Conference On African Development Issues (CU-ICADI), May 9- May 11 2016, Covenant University, Ota, Nigeria.

Agarana, M. C. and Gbadeyan, J.A. and Ajayi, O. O. (2016) Dynamic Response of Inclined Isotropic Elastic Damped Rectangular Mindlin Plate resting on Pasternak Foundation under a Moving Load. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2016 , March 16 - 18, 2016, Hong Kong.

Nwanya , Stephen and Ajayi, O. O. and Achebe , Celestine (2016) Process Variability Analysis of License Vehicle Number Plate Production in Nigeria. Proceedings - International Conference on Industrial Engineering and Operations Management, Kuala Lumpur, Malaysia, March 8-10, 2016.

Onawumi, A.S. and Dunmade, I.S. and Ajayi, O. O. and Sangotayo, E. O. and Oderinde, M. O. (2016) Investigation into House-Hold Energy Consumption in Saki, Southwestern Nigeria. International Journal of Scientific & Engineering Research, 7 (3). pp. 720-727. ISSN 2229-5518

Dunmade, I.S. and Onawumi, A.S. and Ajayi, O. O. (2016) An Approach to Lifecycle Design and Sustainable Management of Nigerian Water Infrastructure. Sustainability in Energy and Buildings: Research Advances, 5 (1). pp. 11-20. ISSN 2054-3743

Oluwunmi, Adedamola O and Emeghe, Ijeoma and Oni, A.S and Ajayi, O. O. (2016) Demographic Factors and Students' Satisfaction in Nigerian Private Universities. Covenant Journal in Research & Built Environment (CJRBE), 4 (2). pp. 87-98.

Ajayi, O. O. and Lawal, D.A and Ogbonnaya, Mercy and Agarana, M. C. (2016) Experimental Investigation and FE Simulation of the Effect of Variable Control on Temperature Distribution in Orthogonal Metal Cutting Process. Procedia Manufacturing, 7. pp. 675-681. ISSN 2351-9789

Onawumi, A.S. and Dunmade, I.S. and Ajayi, O. O. and Adebiyi, K. A. and Omotosho, A. O. (2016) INVESTIGATION OF WORK RELATED HEALTH HAZARDS PREVALENT AMONG METAL FABRICATION WORKERS IN NIGERIA. European Journal of Engineering and Technology, 4 (4). ISSN 2056-5860

Fayomi, O. S. I and Popoola, A. P. I. and Oyawale, Fetus A and Ajayi, O. O. (2016) Performance Evaluation and Multidoped Composite Conditioned of A5-type/10%Ti-Sn Alloy: Processing and Properties. J Fail. Anal. and Preven.. pp. 135-141.

Ajayi, O. O. and Ohijeagbon, O. D. and Ogbonnaya, Mercy and Attabo, Ameh (2016) Wind Power Mapping and NPV of Embedded Generation System in Nigeria. International Journal of Environmental, Chemical, Ecological, Geological and Geophysical Engineering, 10 (5). pp. 479-490.

Salawu, Enesi Y. and Ajayi, O. O. and Olatunji, O. O. (2015) Theoretical Modelling Of Thermal-Hoop Stress Around The Tooth Of A Spur Gear In A Filler Machine. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2 (2). pp. 1635-1640. ISSN 3159-0040

Afolalu, Sunday A. and Ajayi, O. O. and Ikumapayi, O. M. and Adejuyigbe, Samuel B. (2015) Modeling and Simulation of Wave load on Periodic Support for Isolation system of offshore platform. International Journal of Scientific & Engineering Research, 6 (5). pp. 441-447. ISSN 2229-5518

Ajayi, O. O. and Okeowo, Opeyemi and Asaa, Samson Abiodun and Aboyade, Akinwale and Willoughby, A.A. (2015) NOVEL AIRFOIL DESIGN FOR SMALL HORIZONTAL AXIS WIND TURBINE: A PRELIMINARY RESULT. In: Third Southern African Solar Energy Conference (SASEC2015).

Olugbenga, Adeshola Omotosho and Okeniyi, Joshua Olusegun and Ajayi, O. O. and Ajanaku, K. O. and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2015) Analyses of Corrosion Potential from Inhibitor-Admixed Steel-Reinforced Concrete: Implication on Steel-Rebar Corrosion Risk/Probability. International Journal of Structural Analysis & Design– IJSAD, 2 (1). pp. 10-14. ISSN 2372-4102

Ajayi, O. O. and Ohijeagbon, O. D. (2015) Feasibility and techno-economic assessment of stand-alone and hybrid RE for rural electrification in selected sites of south eastern Nigeria. International Journal of Sustainable Energy. pp. 1-14.

Ajayi, O. O. and Fagbenle , R.O. and Katende, J. and Ndambuki, J.M. and Omole, D. O. and Badejo, A.A (2014) Wind Energy Study and Energy Cost of Wind Electricity Generation in Nigeria: Past and Recent Results and a Case Study for South West Nigeria. Energies, 7 (12). pp. 8508-8534. ISSN 1996-1073

Ajayi, O. O. and Ohijeagbon, O. D. and Nwadialo, C. E. and Olasope, O (2014) New model to estimate daily global solar radiation over Nigeria. Sustainable Energy Technologies and Assessments, 5. pp. 28-36.

Olugbenga, Adeshola Omotosho and Okeniyi, Joshua Olusegun and Ajayi, O. O. and Ajanaku, K. O. and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2014) Analyses of corrosion potential from inhibitor-admixed steel-reinforced concrete: Implication on steel-rebar corrosion risk/probability. In: Second International. Conference on Advances In Civil, Structural and Mechanical Engineering- CSM 2014, 16–17 November 2014, Birmingham, United Kingdom.

Duruji, M. M. and Azuh, Dominic E. and Oviasogie, F.O. and Ajayi, O. O. (2014) Education and Gendered Roles in Post-Adjustment Igbo Society. In: Proceedings of EDULEARN14 Conference, 7th-9th July 2014, 2014, Barcelona, Spain.

Ohijeagbon, O. D. and Ajayi, O. O. (2014) Potential and economic viability of standalone hybrid systems for a rural community of Sokoto, North-west Nigeria. Frontiers in Energy, 8 (2). pp. 145-159. ISSN 20951701

Ajayi, O. O. and Olanrewaju, Faith Osasumnen and Azuh, Dominic E. and Duruji, M. M. (2014) URBAN DESIGN AND SUSTAINABLE DEVELOPMENT: A CASE OF MAKOKO AREA OF LAGOS STATE, NIGERIA. European Scientific Journal, 2. pp. 90-97. ISSN 1857- 7431

Omotosho, Olugbenga Adeshola and Loto, C. A. and Ajayi, O. O. and Okeniyi, Joshua Olusegun and Popoola, Abimbola Patricia Id (2014) Investigating potassium chromate and aniline effect on Concrete Steel rebar degradation in saline and sulphate media. International Journal of Electrochemical Science, 9 (4). pp. 2171-2185. ISSN 14523981

Duruji, M. M. and Joshua, Segun and Olanrewaju, I. P. and Oviasogie, F.O. and Ajayi, O. O. and Loromeke, E. R. (2014) Ethnicization of University Education and National Development:The Nigerian Experience. In: INTED 2014.

Okeniyi, Joshua Olusegun and Omotosho, Olugbenga Adeshola and Ajayi, O. O. and Loto, C. A. (2014) Effect of potassium-chromate and sodium-nitrite on concrete steel-rebar degradation in sulphate and saline media. Construction and Building Materials, 50. pp. 448-456. ISSN 09500618

Duruji, M. M. and Azuh, Dominic E. and Olanrewaju, Faith Osasumnen and Ajayi, O. O. (2014) EDUCATION AND GENDERED ROLES IN POST- ADJUSTMENT IGBO SOCIETY. In: EDULEARN14 Conference, 7th-9th July 2014, Barcelona, Spain.

Duruji, M. M. and Joshua, Segun and Olanrewaju, Faith Osasumnen and Ajayi, O. O. and Loromeke, E. R. (2014) ETHNICIZATION OF UNIVERSITY EDUCATION AND NATIONAL DEVELOPMENT: THE NIGERIAN EXPERIENCE. In: INTED2014 Conference, 10th-12th March 2014, Valencia, Spain.

Okeniyi, Joshua Olusegun and Omotosho, O. A. and Ajayi, O. O. and Loto, C. A. (2014) Effect of potassium-chromate and sodium-nitrite on concrete steel-rebar degradation in sulphate and saline media. Construction and Building Materials, 50. pp. 448-456.

Ajayi, O. O. and Ohijeagbon, O. D. and Aasa, S. A. and Omotosho, O. A. (2014) Techno-Economic Assessment of Renewable Electricity for Rural Electrification and IT Applications in Selected Sites Across the Geopolitical Zones of Nigeria. In: Vision 2020: Sustainable Growth, Economic Development, and Global Competitiveness.

Ajayi, O. O. and Fagbenle, Richard O and Katende, James and Aasa, S. A. and Okeniyi, Joshua Olusegun (2013) Wind profile characteristics and turbine performance analysis in Kano, north-western Nigeria. International Journal of Energy and Environmental Engineering, 4 (1). pp. 1-15. ISSN 2251-6832

Aasa, S. A. and Ajayi, O. O. and Adavbiele, A. S. and Akinbode, F.O. (2013) Carbondioxide Electricity Generation Prospect in Nigeria. Journal of Energy Technologies and Policy, 3 (1). pp. 32-39. ISSN 2225-0573

Ajayi, O. O. and Fagbenle, R. O. and Katende, J. (2013) Constitutive Modeling of Wind Energy Potential of Selected Sites in Nigeria: A Pre-Assessment Model. In: Constitutive Modeling of Wind Energy Potential of Selected Sites in Nigeria: A Pre-Assessment Model. IGI-Global.

Ajayi, O. O. and Ajayi, Oluwatoyin O (2013) Nigeria's energy policy: Inferences, analysis and legal ethics toward RE development. Energy Policy, 60. pp. 61-67.

Ajayi, O. O. and Ajayi , Oluwatoyin O. (2013) Nigeria's energy policy:Inferences,analysis and legal ethics toward RE development. Energy Policy. pp. 61-67.

Ajayi, O. O. (2013) Sustainable energy development and environmental protection: Implication for selected states in West Africa. Renewable and Sustainable Energy Reviews, 26. pp. 532-539.

Ajayi, O. O. and Fagbenle, R. O. and Katende, J. and Aasa, S. A. and Okeniyi, J. O. (2013) Wind Profile Characteristics and Turbine Performance Analysis in Kano, North-western Nigeria. International Journal of Energy and Environmental Engineering. pp. 1-15.

Joseph, O. O and Ajayi, J.A. and Ajayi, O. O. and Fayomi, O. S. I and Joseph, O. O and Gbenebor, O. P (2012) MATERIAL PERFORMANCE INVESTIGATION ON THE FAILURE OF AN AIRCRAFT (ABT-18) NOSE WHEEL STRUT. International Journal of Industrial Engineering & Technology (IJIET), 2 (3). pp. 1-6.

Ajayi, O. O. and Joseph, O. O and Omotosho, O. A. and Olabowale, T. O (2012) Rauvolfia vormitoria Effect on the Degradation of Aluminium Alloy in 2.5 M Hydrochloric Acid Solution. In: 2012 International Conference on Clean Technology & Engineering Management (ICCEM 2012), November 12 - 15, 2012 , Mechanical Engineering, Covenant University, Ota, Nigeria .

Aasa, S. A. and Gbenebor, O. P and Ajayi, O. O. (2012) Thermodynamics Characterization of Density models for an Effective Solar Water Heater Sizing. In: 2012 International Conference on Clean Technology & Engineering Management (ICCEM 2012), November 12 - 15, 2012 , Mechanical Engineering, Covenant University, Ota, Nigeria .

Abidakun, O.A. and Koya, Olufemi. A and Ajayi, O. O. (2012) Effect of Expression Conditions on the Yield of Dika Nut (Irvingia Gabonesis) Oil under Uniaxial Compression. In: 2012 International Conference on Clean Technology and Engineering Management (ICCEM 2012), 12th-15th, Mechanical Engineering,Covenant University,Ota,Nigeria.

Omotosho, Olugbenga Adeshola and Okeniyi, Joshua Olusegun and Ajayi, O. O. and Loto, C. A. (2012) Effect of synergies of K2Cr2O7, K2CrO4, NaNO2 and aniline inhibitors on the corrosion potential response of steel reinforced concrete in saline medium. INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCES, 2 (4). pp. 2346-2359. ISSN 0976–4402

Aasa, S. A. and Ajayi, O. O. (2012) EVALUATION OF THE TEMPERATURE EFFECT OF A THERMOSYPHON SOLAR WATER HEATER. Canadian Journal of Pure and Applied Sciences, 6 (1). ISSN 1715-9997

Okeniyi, Joshua Olusegun and Omotosho, Olugbenga Adeshola and Ajayi, O. O. and James, O.O. and Loto, C. A. (2012) Modelling the Performance of Sodium Nitrite and Aniline as Inhibitors in the Corrosion of Steel-reinforced Concrete. Asian Journal of Applied Sciences, 5 (3). pp. 132-143. ISSN 19963343

Ajayi, O. O. and Fagbenle, R. O. and Katende, J. and Omotosho, O. A. and Aasa, S. A. (2012) Analytical Predictive Model for Wind Energy Potential Estimation: A Model for Pre-assessment Study. Journal of Applied Sciences, 12 (5). pp. 450-458. ISSN 1812-5654

Omotosho, O. A. and Ajayi, O. O. and Fayomi, O. S. I and Yussuff, O.O. (2012) Degradation Evaluation of Zinc m 2 M Hydrochloric Acid m the Presence of Bambusa bambos. Singapore Journal of Scientific Research, 2 (1). pp. 14-24. ISSN 2010-006x

Omotosho, O. A. and Ajayi, O. O. and Ajanaku, K. O. and Ifepe, V. O. (2012) Environment Induced Failure of Mild Steel in 2 M Sulphuric Acid Using Chromolaena odorata. J. Mater. Environ. Sci, 3 (1). pp. 66-75. ISSN 2028-2508

Omotosho, O. A. and Ajayi, O. O. (2012) Investigating the Acid Failure of Aluminium Alloy in 2 M Hydrochloric Acid Using Vernonia amygdalina. ITB J. Eng. Sci, 44 (1). pp. 77-92.

Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2012) Investigating the Acid Failure of Aluminium Alloy in 2 M Hydrochloric Acid Using Vernonia amygdalina. ITB J. Eng. Sci, 44 (1). pp. 77-72.

Ajayi, O. O. and Aderonmu, P. A and Ajayi, Oluwatoyin O (2012) Nigeria’s Energy Policy: Issues of Sustainable Energy Development in Nigeria. Nigeria’s Energy Policy: Issues of Sustainable Energy Development in Nigeria.

Ajayi, O. O. and Fagbenle, R. O. and Katende, J. and Okeniyi, Joshua Olusegun (2011) Availability of wind energy resource potential for power generation at Jos, Nigeria. Frontiers in Energy, 5 (4). pp. 376-385.

Omotosho, Olugbenga Adeshola and Loto, C. A. and Ajayi, O. O. and Okeniyi, Joshua Olusegun (2011) Aniline effect on concrete steel rebar degradation in saline and sulfate media. Agricultural Engineering International: CIGR Journal, 13 (2). pp. 1-17. ISSN 16821130

Fayomi, O. S. I and Ajayi, O. O. and Popoola, A. P. I. (2011) Suitability of local binder compositional variation on silica sand for foundry core-making. International Journal of the Physical Sciences , 6 (8). pp. 1940-1946. ISSN ISSN 1992 - 1950

Ajayi, O. O. and Omotosho, O. A. and Ifepe, V. O. (2011) Acid Failure of Mild Steel in 2 M Sulphuric Acid in the Presence of Vernonia amygdalina. J. Mater. Environ. Sci, 2 (2). pp. 186-195. ISSN 2028-2508

Omotosho, O. A. and Loto, C. A. and Ajayi, O. O. and Okeniyi, J. O. (2011) Aniline effect on concrete steel rebar degradation in saline and sulfate media. Agric Eng Int: CIGR Journal, 13 (2). pp. 1-10.

Omotosho, Olugbenga Adeshola and Ajayi, O. O. and Fayomi, O. S. I and Ifepe, V. O. (2011) Assessing the deterioration behaviour of mild steel in 2 M sulphuric acid using Bambusa glauscescens. INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, DINDIGUL, 2 (2). pp. 406-418. ISSN 0976-4259

Ajayi, O. O. and Fagbenle, R. O. and Katende, J. (2011) Assessment of Wind Power Potential and Wind Electricity Generation Using WECS of Two Sites in South West, Nigeria. International Journal of Energy Science, 1 (2). pp. 78-92.

Fagbenle, R. O. and Katende, J. and Ajayi, O. O. and Okeniyi, J. O. (2011) Assessment of wind energy potential of two sites in North-East, Nigeria. Renewable Energy, 36.

Fagbenle, R. O. and Katende, J. and Ajayi, O. O. and Okeniyi, Joshua Olusegun (2011) Assessment of wind energy potential of two sites in North-East, Nigeria. Renewable Energy, 36. pp. 1277-1283.

Ajayi, O. O. and Omotosho, Olugbenga Adeshola and Ajanaku, K. O. and Olawore, Babatunde 0. (2011) Degradation Study of Aluminum Alloy in 2 M Hydrochloric Acid in the Presence of Chromolaena odorata. Journal of Engineering and Applied Sciences, 6 (1). pp. 10-17. ISSN 1816-949X

Ajayi, O. O. and Omotosho, O. A. and Ajanaku, K. O. and Olawore, Babatunde 0. (2011) Failure Evaluation of Aluminum Alloy in 2 M Hydrochloric Acid in the Presence of Cola acuminata. Environmental Research Journal, 5 (4). pp. 163-169. ISSN 1994-5396

Loto, C. A. and Fayomi, O. S. I and Ajayi, O. O. and Tau, V. R. and Popoola, A. P. I. and Durodola, B. M. (2011) Influence of Plating Parameter and Surface Morphology on Mild Steel. Journal of Materials and Environmental Science, 2. pp. 271-280. ISSN 2028-2508

Ohunakin, O.S. and Ojolo, S.J and Ajayi, O. O. (2011) Small hydropower (SHP) development in Nigeria: An assessment. Renewable and Sustainable Energy Reviews, 15. pp. 2006-2013.

Ajayi, O. O. and Fagbenle, R. O. and Katende, J. (2011) Wind Profile Characteristics and Econometrics Analysis of Wind Power Generation of a Site in Sokoto State, Nigeria. ENERGY SCIENCE AND TECHNOLOGY, 1 (2). pp. 54-66. ISSN 1923-8460 [PRINT] ISSN 1923-8479 [ONLINE

Omotosho, O. A. and Okeniyi, J. O. and Ajayi, O. O. (2010) Performance Evaluation of Potassium Dichromate and Potassium Chromate Inhibitors on Concrete Steel Rebar Corrosion. Journal of Failure Analysis and Prevention, 10 (5). pp. 408-415. ISSN 1547-7029

Ajayi, O. O. (2010) Nigeria's Energy and Policy Vision 20:2020: Issues of wind and other Renewable Energy Technologies. Sustainable Development and Environmental Protection.

Omotosho, Olugbenga Adeshola and Okeniyi, Joshua Olusegun and Ajayi, O. O. (2010) Performance Evaluation of Potassium Dichromate and Potassium Chromate Inhibitors on Concrete Steel Rebar Corrosion. Journal of Failure Analysis and Prevention, 10 (5). pp. 408-415. ISSN 1547-7029

Ajayi, O. O. (2010) The Potential for Wind Energy in Nigeria. WIND ENGINEERING, 34 (3). pp. 303-311.

Ajayi, O. O. and Fagbenle, R. O. and Katende, J. and Okeniyi, Joshua Olusegun and Omotosho, Olugbenga Adeshola (2010) WIND ENERGY POTENTIAL FOR POWER GENERATION OF A LOCAL SITE IN GUSAU, NIGERIA. International Journal of Energy for a Clean Environment, 11. pp. 99-116. ISSN 2150-3621 ISSN On-line: 2150-363X

Ajayi, O. O. (2009) Assessment of utilization of wind energy resources in Nigeria. Energy Policy, 37. pp. 750-753.

Ajayi, O. O. and Ajanaku, K. O. (2009) NIGERIA'S ENERGY CHALLENGE AND POWER DEVELOPMENT: THE WAY FORWARD. NIGERIA'S ENERGY CHALLENGE AND POWER DEVELOPMENT: THE WAY FORWARD, 20 (3). pp. 411-413.

Ajayi, O. O. and Olawale, D. O. (2007) Average Weight Based Quality Control of Nigeria Bakery Industry: A Statistical Approach. American Journal of Food Technology, 2 (3). pp. 212-216. ISSN 1557-4571

Ajayi, O. O. (2007) Constitutive Relationship Between Crack Length, Number of Cycles and Stress Amplitudes for Martensitic Steel. Research Journal of Physics, 1 (1). ISSN 1819-3463

Odukwe, O. A. and Ajayi, O. O. and Oluwadare, G. O. (2007) Simulation of Crack Growth Rate in Martensitic Steel. Journal of Applied Sciences, 7 (2). pp. 302-305. ISSN 1812-5638

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Joseph, O. O and Akinlabi, Esther T. and Babalola, P.O. and Udoye, Nduka Ekene and Ajayi, O. O. UNSPECIFIED

Abodunrin, T.J and Ajayi, O. O. and Emetere, Moses and Popoola, A. P. I. and Uyor, U. O. and Popoola, O. and Popool, O. Effect of Bandgap Vs Electron Tunneling on Photovoltaic Performance of Ringwood (Syzgium Anisatum) Dyesensitized Solar Cell. Close Drawer Menu IAENG Transactions on Engineering Sciences.

This list was generated on Thu Apr 18 11:04:01 2024 WAT.