Items where Division is "Faculty of Engineering, Science and Mathematics > School of Engineering Sciences" and Year is 2018

Group by: Creators | Item Type | No Grouping

Jump to: A | B | C | D | E | F | G | I | J | K | L | M | N | O | P | R | S | T | U | W | Y

Number of items: 394.

A

ADELUOYE, OLUWATOSIN and Covenant University, Theses (2018) COLLEGE OF THE BUILT ENVIRONMENT, COVENANT UNIVERSITY, OGUN STATE: ACHIEVING GOOD CIRCULATION IN THE DESIGN OF LEARNING ENVIRONMENTS. Masters thesis, COVENANT UNIVERSITY.

AGBEYO, OLUWATIMILEHIN AYODEJI and Covenant University, Theses (2018) PROPOSED NATIONAL PAEDIATRIC HOSPITAL, ADO-EKITI, EKITI STATE, NIGERIA AN ATTEMPT AT CREATING A HEALING ENVIRONMENT IN HOSPITALS. Masters thesis, COVENANT UNIVERSITY.

AKANDE, I.G and Oluwole, O. O. and Fayomi, O. S. I (2018) Optimizing the defensive characteristics of mild steel via the electrodeposition of ZneSi3N4 reinforcing particles. Defence Technology.

ASIYANBOLA, OLATOMIDE DAVID and Covenant University, Theses (2018) CONSTRUCTION CRAFTSMEN’S AVAILABILITY AND PROJECT PERFORMANCE IN SELECTED SOUTHWESTERN STATES, NIGERIA. Masters thesis, COVENANT UNIVERSITY.

Abam, Fidelis I. and Ekwe, Ekwe B. and Briggs, T. A. and Effiom, Samuel O. and Ohunakin, O.S. and Allen, M. (2018) Thermodynamic performance and environmental sustainability of adapted organic Rankine cycles at varying evaporator pressure. International Journal of Ambient Energy, 39 (4). ISSN 0143-0750

Abam, Fidelis I. and Ohunakin, O.S. (2018) Applications of small-scale, stand-alone wind energy conversion systems in rural Cross River State, Nigeria. African Journal of Science, Technology, Innovation and Development, 10 (5). ISSN 2042-1346

Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ajayi, O. O. and Afolalu, Sunday A. and Fajobi, M. A. (2018) MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF DUCTILE IRON PRODUCED FROM FUEL - FIRED ROTARY FURNACE. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 694-704. ISSN 0976-6359

Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ajayi, O. O. and Afolalu, Sunday A. and Fajobi, M. A. and Atanda, P. O. (2018) MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF DUCTILE IRON PRODUCED FROM FUEL - FIRED ROTARY FURNACE. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 694-704. ISSN 0976-6359

Abioye, Abiodun A. and Atanda, P. O. and Abioye, Oluwabunmi P. and Akinlabi, Stephen A. and Akinlabi, Esther T. and Bolu, Christian and Afolalu, Sunday A. and Ajayi, O. O. and Ohijeagbon, I. O. (2018) A Review on Automotive Industries and Foundries in Nigeria. In: IOP Conf. Series: Materials Science and Engineering.

Abioye, Oluwabunmi P. and Abioye, Abiodun A. and Afolalu, Sunday A. and Ongbali, Samson O. (2018) A REVIEW OF BIODEGRADABLE PLASTICS IN NIGERIA. International Journal of Mechanical Engineering and Technology (IJMET), 9 (10). ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Abioye, Oluwabunmi P. and Abioye, Abiodun A. and Afolalu, Sunday A. and Udo, Mfon .O (2018) NUMERICAL INVESTIGATION OF STRESS AND STRAIN DISTRIBUTION IN EQUAL CHANNEL ANGULAR EXTRUSION OF AL 6063 ALLOY. International Journal of Civil Engineering and Technology, 9 (11). pp. 522-531. ISSN 0976-6308 and ISSN Online: 0976-6316

Adegbola, Adesola Taoreed and Aghachi, I. E. A. and Agboola, Oluranti (2018) SEM and AFM microscopical characterization of rPAN fibre and PET blends. Alexandria Engineering Journal, 57. pp. 475-481.

Adekitan, Aderibigbe I. (2018) RISK ASSESSMENT AND SAFETY ANALYSIS FOR A JET FUEL TANK CORROSION RECERTIFICATION OPERATION. International Journal of Mechanical Engineering and Technology (IJMET), 9 (7). pp. 387-396. ISSN 0976-6359

Adekitan, Aderibigbe I. (2018) SUPPLY INSTABILITY INDUCED TORQUE VARIATIONS OF A THREE PHASE ASYNCHRONOUS MOTOR. Adekitan, 9 (6). pp. 572-583.

Adekitan, Aderibigbe I. and Adetokun, Bukola and Okokpujie, Kennedy O. (2018) A data-based investigation of vehicle maintenance cost components using ANN. In: IOP Conf. Series: Materials Science and Engineering.

Adekitan, Aderibigbe I. and Adetokun, Bukola and Shomefun, Tobi and Aligbe, Alex (2018) Cost implication of Line Voltage variation on Three Phase Induction Motor operation. TELKOMNIKA, 16 (4). pp. 1404-1412. ISSN 1693-6930

Adekitan, Aderibigbe I. and Omoruyi, Osemwegie (2018) Stock keeping accuracy: A data based investigation of storage tank calibration challenges. Data in Brief, 19. pp. 2155-2162.

Adekitan, Aderibigbe I. and Shomefun, Tobi and John, Temitope M. and Adetokun, Bukola and Aligbe, Alex (2018) Dataset on statistical analysis of Jet A-1 fuel laboratory properties for on-spec into-plane operations. Data article.

Adelekan, D.S and Ohunakin, O.S. and Gill, Jatinder and Atayero, A. A. and Diarra, Charles D. and Asuzu, Ebube A. (2018) Experimental performance of a safe charge of LPG refrigerant enhanced with varying concentrations of TiO2 nano-lubricant in a domestic refrigerator. Journal of Thermal Analysis and Calorimetry, 136. pp. 2439-2448.

Adeniyi, Olalekan D. and Adeniyi, Mary I. and Olutoye, Moses A. and Ewan, Bruce C. R. and Okafor, Joseph O. and Afolabi, Eyitayo A. and Ayoola, A. A. and Ojewumi, M. E. and Omoleye, James (2018) COMPARISON OF THE ELECTROCHEMICAL PERFORMANCES OF MCDCFC USING HAND AND BALL MILLED BIOMASS CARBON FUELS. In: Theories, Methodologies, Tools and Applications of Computational Systems for Development, 2017.

Adenubi, Solomon A. and Kevin C., Igwilo and Okoro, Emeka Emmanuel (2018) Data for analyzing drilling ﬂuid ability to effectively achieve hole cleaning for high shear and low shear rates. Data in Brief, 19. pp. 1515-1521. ISSN 2352-3409

Adeoye, J. B. and Omoleye, James and Ojewumi, M. E. (2018) Development of alum from kaolin deposit using response surface methodology. MOJ Bioorganic & Organic Chemistry, 2 (3). pp. 167-170.

Aderonmu, P. A and Adewale , B. A. and Babalola, Daniel Olatunde and Peter, Nkolika Joy and Awoyera, P. O. (2018) ASSESSMENT OF REVOLUTIONARY PEDAGOGIC PRACTICES IN THE ARCHITECTURAL DESIGN STUDIOS OF SELECTED NIGERIAN UNIVERSITIES. International Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 1493-1518. ISSN 0976-6316

Adetiba, E. and Olugbara, O.O. and Taiwo, T.B. and Adebiyi, M.O. and Badejo, J. A. and Akanle, M.B. and Matthews, V.O. (2018) Alignment-free Z-curve genomic cepstral coefficients and machine learning for classification of viruses. In: Bioinformatics and Biomedical Engineering. Springer Verlag, pp. 290-301.

Adewale , B. A. and Babalola, Daniel Olatunde and Jegede, Foluke and Afolabi, A.O. and Oyenuga, Temilola and Obi, Chukwuma (2018) Dataset on cost comparative analysis of different walling materials in residential buildings in a developing economy. Data in Brief, 19. pp. 1918-1924.

Adeyemi, Olabisi I. and Emagbetere, Eyere and Oreko, Ufuoma B. and Aworinde, Abraham K. and Adeosun, Samson O. and Oyawale, Fetus A and Ishola, Felix and Ajayi, O. O. (2018) Mechanical Characterisation and Modelling of a Pulverised Palm Kernel Shell based Spur Gear. In: International Conference on Industrial Engineering and Operations Management, October 29 – November 1, 2018, Pretoria / Johannesburg, South Africa.

Afolabi, A.O. and Amusan, L. M. and Owolabi, J. D and Ojelabi, Rapheal A. and Joshua, Opeyemi and Tunji-Olayeni, P .F (2018) Assessment of the Linkages and Leakages in a Cloud-Based Computing Collaboration among Construction Stakeholders. In: Construction Research Congress.

Afolabi, A.O. and Fagbenle, Olabosipo I. and Mosaku, T. O. and Ojelabi, Rapheal A. and Omuh, I. O. (2018) An Empirical Investigation on the Benefits and Leakages in the Use of Web-Based Technologies in the Construction Industry. International Journal of Applied Engineering Research, 13 (2). pp. 983-994. ISSN 0973-4562

Afolabi, A.O. and Fagbenle, Olabosipo I. and Ojelabi, Rapheal A. and Amusan, L. M. and Tunji-Olayeni, P .F and Daniyan, Victor (2018) Development of a Web-Based Human Resource Sourcing System for Labour Only Contracts. In: Construction Research Congress.

Afolabi, A.O. and Ojelabi, Rapheal A. and Adewale , B. A. and Akinola, Adedotun and Afolabi, Adesola (2018) Statistical exploration of dataset examining key indicators influencing housing and urban infrastructure investments in megacities. Data in Brief, 18. pp. 1725-1733.

Afolabi, A.O. and Ojelabi, Rapheal A. and Omuh, I. O. and Tunji-Olayeni, P .F and Adeyemi, M (2018) CRITICAL SUCCESS FACTORS INFLUENCING PRODUCTIVITY OF CONSTRUCTION ARTISANS IN THE BUILDING INDUSTRY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 858-867. ISSN 0976-6359

Afolabi, A.O. and Ojelabi, Rapheal A. and Omuh, I. O. and Tunji-Olayeni, P .F and Afolabi, A. (2018) BUILDING DESIGNS AND PLUMBING FACILITIES: THE IMPLICATION FOR RISING MAINTENANCE COST. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 1336-1344. ISSN 0976-6359

Afolabi, A.O. and Ojelabi, Rapheal A. and Oyeyipo, Opeyemi (2018) An analysis of social media marketing of indigenous construction firms in Nigeria: A tool for sustainable growth. INTERNATIONAL JOURNAL OF CONSTRUCTION SUPPLY CHAIN MANAGEMENT, 8 (2). pp. 60-72.

Afolabi, A.O. and Ojelabi, Rapheal A. and Tunji-Olayeni, P .F and Fagbenle, Olabosipo I. and Mosaku, T. O. (2018) Survey datasets on women participation in green jobs in the construction industry. Data in Brief, 17. pp. 856-862.

Afolabi, A.O. and Ojelabi, Rapheal A. and Tunji-Olayeni, P .F and Omuh, I. O. and Adedotun, Akinola (2018) DATA ARCHITECTURE OF BUILDING MATERIALS USING WEB-BASED TECHNOLOGIES FOR SUSTAINABLE MATERIAL MANAGEMENT. International Journal of Mechanical Engineering and Technology (IJMET), 9 (6). pp. 1155-1165. ISSN 0976-6359

Afolabi, A.O. and Ojelabi, Rapheal A. and Tunji-Olayeni, P .F and Omuh, I. O. and Adedotun, Akinola and Afolabi, Adesola (2018) EMPIRICAL REVIEW OF VARIATION ORDERS’ INFLUENCE IN CONSTRUCTION PROJECT DELIVERY. International Journal of Civil Engineering and Technology (IJCIET), 9 (7). pp. 412-421. ISSN 0976-6316

Afolabi, A.O. and Ojelabi, Rapheal A. and Tunji-Olayeni, P .F and Omuh, I. O. and Afolabi, Adesola (2018) QUANTITATIVE ANALYSIS OF SOCIO-ECONOMIC DRIVERS OF HOUSING AND URBAN DEVELOPMENT PROJECTS IN MEGACITIES. International Journal of Civil Engineering and Technology (IJCIET), 9 (6). pp. 1096-1106. ISSN 0976-6316

Afolabi, A.O. and Oluwatayo, A. A. and Oyeyipo, Opeyemi and Ojelabi, Rapheal A. and Fagbenle, Olabosipo I. (2018) Assessment of Designers’ Perception of Post Conflict Housing Schemes for Internally Displaced Persons. Construction Economics and Building, 18 (1). pp. 27-47.

Afolabi, A.O. and Oyeyipo, Opeyemi and Ojelabi, Rapheal A. and Amusan, L. M. (2018) CONSTRUCTION PROFESSIONALS’ PERCEPTION OF A WEB-BASED RECRUITING SYSTEM FOR SKILLED LABOUR. Journal of Theoretical and Applied Information Technology, 96 (10). pp. 2885-2899. ISSN 1817-3195

Afolabi, A.O. and Tunji-Olayeni, P .F and Ojelabi, Rapheal A. and Omuh, I. O. (2018) Construction Waste Prevention as a Sustainable tool in Building Mega Cities: A Theoretical Framework. In: IOP Conf. Series: Earth and Environmental Science.

Afolabi, Richard Oyekunle and Ogunkunle, Temitope and Olabode, O.A. and Yusuf, Esther Ojima (2018) Dataset on the beneficiation of a Nigerian bentoniteclay mineral for drilling mud formulation. Data in Brief, 20. pp. 234-241.

Afolabi, Richard Oyekunle and Orodu, O. D. and Seteyeobot, Ifeanyi (2018) Predictive modelling of the impact of silica nanoparticles on fluid loss of water based drilling mud. Applied Clay Science, 151. pp. 37-45.

Afolalu, Sunday A. and Abioye, Abiodun A. and Dirisu, J. O. and Okokpujie, Imhade P. and Ajayi, O. O. and Adetunji, Olajide R. (2018) Investigation of Wear Land and Rate of Locally Made HSS Cutting Tool. In: International Conference on Nano and Materials Science AIP Conf..

Afolalu, Sunday A. and Abioye, Abiodun A. and Udo, Mfon .O and Adetunji, Olajide R. and Ikumapayi, O. M. and Adejuyigbe, Samuel B. (2018) Data showing the effects of temperature and time variances on nano-additives treatment of mild steel during machining. Data in Brief, 19. pp. 456-461.

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, A. A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel (ASTM A36). In: 6th International Conference on Nano and Materials Science, 2018.

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel (ASTM A36). In: 6th International Conference on Nano and Materials Science, 2018.

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel(ASTM A36). In: International Conference on Nano and Materials Science.

Afolalu, Sunday A. and Asonaminasom, Ezekiel H and Ongbali, Samson O. and Abioye, Abiodun A. and Udo, Mfon .O and Salawu, Enesi Y. (2018) Dataset on experimental investigation of optimum carburizing temperature and holding time of bi-nano additives treatment of AISI 5130 steel. Data in Brief, 19. pp. 2279-2283.

Afolalu, Sunday A. and Asonaminasom, Ezekiel H and Ongbali, Samson O. and Abioye, Abiodun A. and Udo, Mfon .O and Salawu, Enesi Y. (2018) Dataset on experimental investigation of optimum carburizing temperature and holdingtime of bi-nano additives treatment of AISI 5130 steel. Data in Brief, 19. pp. 2279-2283.

Afolalu, Sunday A. and Ayuba, Samuel U. and Ihebom, Ikechi V. and Elewa, Remilekun R. and Oluyemi, Kehinde (2018) ROLE OF RELIABILITY MANAGEMENT TOOLS AND DOCUMENTATIONS- A REVIEW. Global Journal of EngineeringScience and Research Management, 5 (3). p. 39. ISSN 2349-4506

Afolalu, Sunday A. and Ihebom, Ikechi V. and Elewa, Remilekun R. and Ayuba, Samuel U. and Oluyemi, Kehinde (2018) HYBRID METHOD IN THE RELIABILITY ALLOCATION IN AN INDUSTRY-A REVIEW. International Journal Of Advanced Research (IJAR), 6 (3). pp. 770-773. ISSN 2320-5407

Afolalu, Sunday A. and Okokpujie, Imhade P. and Salawu, Enesi Y. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ikumapayi, O. M. (2018) Study of the Performances of Nano-Case Treatment Cutting Tools on Carbon Steel Work Material during Turning Operation. In: International Conference on Nano and Materials Science.

Afolalu, Sunday A. and Okokpujie, Imhade P. and Salawu, Enesi Y. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ikumapayi, O. M. (2018) Study of the Performances of Nano-Case Treatment Cutting Tools on Carbon Steel Work Material during Turning Operation. In: 6th International Conference on Nano and Materials Science AIP Conf. Proc.

Afolalu, Sunday A. and Oluwaseyifunmi, Orenuga and Ongbali, Samson O. and Abioye, Abiodun A. and Okokpujie, Imhade P. and Olamilekan, Oloyede R (2018) The Study of the Impact of Nano Carbon Additives on Astm A53 Mild Steel During Machining. In: IOP Conf. Series: Materials Science and Engineering.

Afolalu, Sunday A. and Ongbali, Samson O. and Abioye, Abiodun A. and Ajayi, O. O. and Adelakun, Oluwasegun J and Abdulkareem, Ademola (2018) INVESTIGATION OF EFFECTS OF DAMPED AND NON-DAMPED SYSTEM ON A PLATFORM STRUCTURE. International Journal of Advance Research, 3 (6). pp. 1-9. ISSN 2320-9135

Afolalu, Sunday A. and Salawu, Enesi Y. and Oluyemi, Kehinde and Ayuba, Samuel U. and Ihebom, Ikechi V. and Elewa, Remilekun R. (2018) Failure Mode and Effect Analysis a Tool for Reliability Evaluation: Review. European Journal of Engineering Research and Science, 3 (2). pp. 65-68.

Agashua, Lucia O. and Ogbiye, S. A. (2018) Influence of Cement, Bitumen and Lime on Some Lateritic Soil Samples as Pavement Material. In: IOP Conf. Series: Materials Science and Engineering 298, 2018.

Agudosi, Elochukwu Stephen and Abdullah, Ezzat Chan and Mubarak, Nabisab Mujawar and Khalid, Mohamad Sukeri and Pudzad, Musa Yahaya and Agudos, Ngozi Patricia and Abutu, Enemona David (2018) Pilot study of in-line continuous flocculation water treatment plant. Journal of Environmental Chemical Engineering. pp. 7185-7191.

Ajao, Adekunle M and Ogunbayo , Babatunde F and Ogundipe , Kunle Elizah and Joshua, Opeyemi and Olofinnade, O. M. (2018) Experimental data sets on properties of rivers and as an aggregate in replacement of crushed rock for inter locking stones production. Data in Brief, 20. pp. 602-608.

Ajayi, O. O. and Omowa, Olasubomi F. and Abioye, Oluwabunmi P. and Omotosho, Olugbenga Adeshola and Akinlabi, Esther T. and Akinlabi, Stephen A. and Abioye, Abiodun A. and Owoeye, T. F. and Afolalu, Sunday A. (2018) Finite Element Modelling of Electrokinetic Deposition of Zinc on Mild Steel with ZnO-Citrus sinensis as Nano-Additive. In: TMS 2018: CFD Modeling and Simulation in Materials Processing, 13 January 2018, Online:.

Ajayi, O. O. and Omowa, Olasubomi F. and Abioye, Oluwabunmi P. and Omotosho, Olugbenga Adeshola and Akinlabi, Esther T. and Akinlabi, Stephen A. and Abioye, Abiodun A. and Owoeye, T. F. and Afolalu, Sunday A. (2018) Finite Element Modelling of Electrokinetic Deposition of Zinc on Mild Steel with ZnO-Citrus sinensis as Nano-Additive. In: CFD Modeling and Simulation in Materials Processing 2018. The Minerals, Metals & Materials Society Spinger, pp. 199-211. ISBN 978-3-319-72059-3

Ajayi, O. O. and Omowa, Olasubomi F. and Omotosho, Olugbenga Adeshola and Abioye, Oluwabunmi P. and Akinlabi, Esther T. and Akinlabi, Stephen A. and Abioye, Abiodun A. and Owoeye, Taiwo Felicia and Afolalu, Sunday A. (2018) Experimental Investigation of the Effect of ZnO-Citrus sinensis Nano-additive on the Electrokinetic Deposition of Zinc on Mild Steel in Acid Chloride. In: 147th Annual Meeting & Exhibition Supplemental Proceedings.

Ajibola, Abosede and Omoleye, James and Efeovbokhan, Vincent Enon (2018) Catalytic cracking of polyethylene plastic waste using synthesised zeolite Y from Nigerian kaolin deposit. Applied Petrochemical Research. pp. 1-7.

Ajibola, Abosede and Omoleye, James and Efeovbokhan, Vincent Enon (2018) Comparative Study of the Chemical Compositions of Liquid Fuel from Thermal Cracking of Low and High-Density Polyethylene Plastic Waste. In: IOP Conf. Series: Materials Science and Engineering.

Akinbo, Faith and Fagbenle, Olabosipo I. and Amusan, L. M. and Afolabi, A.O. (2018) Dataset on sustainable construction practices of foreign and indigenous construction firms. Data in Brief, 20. pp. 812-818.

Akinbo, T. F. and Fagbenle, Olabosipo I. and Amusan, L. M. and Afolabi, A.O. and Tunji-Olayeni, P .F (2018) EXPLORATORY STUDY ON SUSTAINABILITY PRACTICES OF LOCALIZED AND EXPATRIATE CONSTRUCTION BUSINESSES. International Journal of Civil Engineering and Technology (IJCIET), 9 (13). pp. 1446-1456. ISSN 0976-6316

Akinjare, O. A. and Oloyede, S. A. and Durodola, O. D. and Akinjare, Victoria Abosede and Ayedun, C. A. (2018) AN APPRAISAL OF RISK FACTORS PECULIAR TO COMMERCIAL REAL ESTATE, STOCK AND BOND INVESTMENT PORTFOLIOS IN NIGERIA. International Journal of Civil Engineering and Technology (IJCIET), 9 (6). pp. 773-781. ISSN 0976-6316

Akinola, Adedotun and Adeboye, A. B. and Oluwatayo, A. A. and Alagbe, O. A. and Babalola, P.O. and Afolabi, A.O. (2018) Survey dataset on architect's awareness and adoption of building envelope technologies for energy efficient housing in Lagos State. Data in Brief.

Akinsiku, A.A. and Dare, E.O and Ajanaku, K. O. and Ajani, Olayinka O. and OLUGBUYIRO, J.A.O and Siyanbola, T. O. and Ejilude, Oluwaseun and Emetere, Moses (2018) Modeling and Synthesis of Ag and Ag/Ni Allied Bimetallic Nanoparticles by Green Method: Optical and Biological Properties. International Journal of Biomaterials.

Akinwole, Ifeoluwa Emmanuel and Alebiowu, G and Oyatogun, Grace Modupe and Abere, Dare Victor and Oluwasegun, K.M and Oyatogun, Oyeniran Amos and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Adenigba, A.E and Ayodele, T.J (2018) Synthesis and Characterization of Cowry and Crab Shells Based Chitosan for Drug Delivery. Bioceramics Development and Applications, 8 (1). pp. 1-6. ISSN 2090-5025

Akinwumi, S. A. and Omotosho, T. V. and Usikalu, M.R. and Odetunmibi, , O. A. and Ometan, Oluwafunmilayo O. and Adewusi, M. O. (2018) Dataset of surface water vapour density in southeast,Nigeria. Data in Brief, 18. pp. 131-138. ISSN 2352-3409

Akpaida, V. O. A. and Anyasi, F. I. and Uzairue, Stanley Idiake and Idim, A. I. (2018) Determination of an Outdoor Path Loss Model and Signal Penetration Level in Some Selected Modern Residential and Office Apartments in Ogbomosho, Oyo State, Nigeria. Journal of Engineering Research and Reports, 1 (2). pp. 1-25.

Akpaida, V. O. A. and Anyasi, F. I. and Uzairue, Stanley Idiake and Idim, A. I. and Alashiri, Olaitan (2018) A Review Investigation on Outdoor and Indoor Propagation Models. Journal of Materials Science Research and Reviews, 1 (1). pp. 1-11.

Alaba, Peter Adeniyi and Abbas, Ali and Huang, Jun and Daud, Wan Mohd Wan (2018) Molybdenum carbide nanoparticle: Understanding the surface properties and reaction mechanism for energy production towards a sustainable future. Renewable and Sustainable Energy Reviews, 91. pp. 287-300.

Alaba, Peter Adeniyi and Oladoja, Nurudeen Abiola and Sani, Yahaya Muhammad and Ayodele, Olumide Bolarinwa and Mohammed, Isah Yakub and Olupinla, Sunday Felix (2018) Insight into wastewater decontamination using polymeric adsorbents. Journal of Environmental Chemical Engineering, 6. pp. 1651-1672.

Amaize, Peter and Aligbe, Alex and Abayomi , K.T. and Airoboman, A.E and Okokpujie, Kennedy O. (2018) AN ASSESSMENT OF RENEWABLE ENERGY POTENTIALS IN NIGERIA USING BIOGAS. International Journal of Civil Engineering and Technology (IJCIET), 9 (11). pp. 2938-2948. ISSN 0976-6316

Ameh, Oko John and Egbanubi, Kehinde Comfort and Joshua, Opeyemi (2018) Assessment of the Correlation between the Quality of Building Materials and Strength of Concrete Members in the Building. Assessment of the Correlation between the Quality of Building Materials and Strength of Concrete Members in the Building.

Ameloko, A. and Ayolabi, Elijah Adebowale (2018) Geophysical assessment for vertical leachate migration profile and physicochemical study of groundwater around the Olusosun dumpsite Lagos, south‑west Nigeria. Applied Water Science, 8. ISSN 2190-5495

Ameloko, A. and Ayolabi, Elijah Adebowale and Akinmosin, Adewale (2018) Time dependent electrical resistivity tomography and seasonal variation assessment of groundwater around the Olushosun dumpsite Lagos, South-west, Nigeria. Journal of African Earth Sciences, 147. pp. 243-253.

Ameloko, A. and Ayolabi, Elijah Adebowale and Enaworu, E. and Bolujo, E. O. (2018) ASSESSMENT OF LEACHATE CONTAMINATION OF GROUNDWATER AROUND IGHENRE EKOTEDO DUMPSITE, OTA , SOUTHWEST NIGERIA. Petroleum and Coal, 60 (5). pp. 890-902. ISSN 1337-7027

Amusan, L. M. and Afolabi, A.O. and Ojelabi, Rapheal A. and Omuh, I. O. and Okagbue, H. I. (2018) Data exploration on factors that influences construction cost and time performance on construction project sites. Data in Brief, 17. pp. 1320-1325.

Amusan, L. M. and Akintaro, Hezekiah and Osawaru, FAITH and Makinde, Adebisi and Tunji-Olayeni, P .F and Akomolafe, Maryam (2018) INFORMATION ON STATE OF CHALLENGES OF WASTE MANAGEMENT SYSTEM IN NIGERIA URBAN HOUSING SYSTEM. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (2). pp. 75-86. ISSN 2249-8001

Amusan, L. M. and Ayo, C. K. and Ebunoluwa, Adeyemi and Joshua, Opeyemi and Ojelabi, Rapheal A. (2018) DATA ON EXPERT SYSTEM-ECONOMETRIC ENTROPY INFORMATICS MODEL FOR ADJUDICATING RESIDENTIAL BUILDING PROJECT COSTS. Data in Brief.

Amusan, L. M. and Ayo-Yussuf, Kehinde and Ogunde, Ayodeji and Tunji-Olayeni, P .F and Afolabi, A.O. and Owolabi, J. D (2018) WORK ORDER BUILDING INFORMATICS PLATFORM FOR PLANNING RESIDENTIAL BUILDING PROJECTS AND MAINTENANCE WORK. International Journal of Civil Engineering and Technology (IJCIET), 9 (9). pp. 135-146. ISSN 0976-6316

Amusan, L. M. and EZEWINWE, OLUCHI and Osawaru , FAITH and Joshua, Opeyemi and Afolabi, A.O. and Ojelabi, Rapheal A. (2018) CREATING SUSTAINABLE CONSTRUCTION: BUILDING INFORMATICS MODELLING AND LEAN CONSTRUCTION APPROACH. Journal of Theoretical and Applied Information Technology, 96 (10). pp. 3025-3035. ISSN 1992-8645

Amusan, L. M. and Oloniju, Leke I, and Akomolafe, Maryam and Makinde, Adebisi and Peter, Nkolika Joy and Farayola, Hezekiah and Osawaru , FAITH (2018) ADOPTING INFORMATION AND COMMUNICATION TECHNOLOGY IN CONSTRUCTION INDUSTRY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 739-746. ISSN 0976-6359

Amusan, L. M. and Osawaru, FAITH and Akanya, Cinwosoko Ninma and Awotinde, Oladipupo Sunday (2018) Data on System Approach to Process of urban housing construction, renewal and upgrading. Data in Brief, 19. pp. 2427-2437.

Anakhu, Peter I. and Abioye, Abiodun A. and Bolu, Christian and Azeta, Joseph (2018) Modeling of the kinematic geometry of spur gears using matlab. In: MATEC Web of Conferences.

Anakhu, Peter I. and Bolu, Christian and Abioye, Abiodun A. and Azeta, Joseph (2018) Fused Deposition Modeling Printed Patterns for Sand Casting in a Nigerian Foundry: A Review. International Journal of Applied Engineering Research, 13 (7). pp. 5113-5119. ISSN 0973-4562

Anakhu, Peter I. and Bolu, Christian and Abioye, Abiodun A. and Onyiagha, G. (2018) Cost-effectiveness Management of a Compressed-air System Using an Energy Analysis Application. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Anakhu, Peter I. and Bolu, Christian and Abioye, Abiodun A. and Onyiagha, G. and Boyo, H.O. and Jolayemi, K. and Azeta, Joseph (2018) Innovative Foundry Technology and Material Using Fused Deposition Modeling and Polylactic Acid Material in Sand Casing. A R C H I V E S o f F O U N D R Y E N G I N E E R I N G, 18 (2). pp. 65-71. ISSN 2299-2944

Anawe, Paul Apeye Lucky and Fayomi, O. S. I and Ayoola, A. A. and Popoola, A. P. I. (2018) Effect of SnO2/SiO2 nano particle dispersant on the performance characteristic of complex multi-doped composite coating produced through electrodeposition on oil and gas storage tap. Results in Physics, 9. pp. 1570-1571.

Anawe, Paul Apeye Lucky and Folayan , A. J, (2018) Data on optimization of production parameters on Persea Americana (Avocado)plant oil biodiesel yield and quality. Data in Brief, 20. pp. 855-863. ISSN 2352-3409

Anawe, Paul Apeye Lucky and Folayan , A. J, (2018) Experimental investigation of fluid loss and cake thickness control ability of zirconium (IV) oxide (. International Journal of Engineering & Technology, 7 (2). pp. 702-707.

Anawe, Paul Apeye Lucky and Folayan , A. J, (2018) INVESTIGATION OF THE EFFECT OF YTTRIUM OXIDE (y2O3 ) NANOPARTICLE ON THE RHEOLOGICAL PROPERTIES OF WATER BASED MUD UNDER HIGH PRESSURE HIGH TEMPERATURE (HPHT) ENVIRONMENT. International Journal of Mechanical Engineering and Technology (IJMET), 9 (7). pp. 545-559. ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Anawe, Paul Apeye Lucky and Folayan , A. J, (2018) Modification of Bingham Plastic Rheological Model for Better Rheological Characterization of Synthetic Based Drilling Mud. Journal of Engineering and Applied Sciences, 13 (10). pp. 3573-3581. ISSN 1816-949X

Anawe, Paul Apeye Lucky and Folayan , A. J, (2018) Novel Synthetic-Based Drilling Fluid through Enzymatic Interesterification of Canola Oil. International Journal of Chemical Engineering. ISSN 1687-806X

Anawe, Paul Apeye Lucky and Folayan , A. J, (2018) Uncertainties quantification and modelling of different rheological models in estimation of pressure losses during drilling operation. International Journal of Engineering & Technology, 7 (2). 694--701.

Anozie, Ambrose Nwora and Salami, A. O. and Babatunde, Damilola Elizabeth and Babatunde, Odunayo E. (2018) Comparative evaluation of processes for production of soybean meal for poultry feed in Nigeria Evaluación comparativa de procesos para la producción de harina de soya para la alimentación de pollos en Nigeria. Cuban Journal of Agricultural Science, 52 (2). pp. 1-10.

Anyasi, F. I. and Uzairue, Stanley Idiake and Enehizena, O.N and Matthews, V. O. and Amaize, Peter and Nkordeh, Nsikan (2018) Design and Analysis of a Broadcast Network Using Logical Segmentation. TELKOMNIKA, 16 (2). pp. 803-810. ISSN 1693-6930

Anyasi, F. I. and Uzairue, Stanley Idiake and Mkpuluma, David and Idim, A. I. and Ighalo, Joshua (2018) Design and Implementation of a Cattle Grazing Tracking and Anti-theft Alert GPS/GSM Collar, Leveraging on Improvement in Telecom and ICT Infrastructure. Asian Journal of Advanced Research and Reports, 1 (2). pp. 1-9.

Awodele, Oludele and Okesola, Olatunji J. and Okokpujie, Kennedy O. and Damilola , Fowora and Kuyoro , Afolashade and Adebiyi , Ariyo (2018) Cryptography and the Improvement of Security in Wireless Sensor Networks. In: " Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2018,. 4-6 July, 2018, London, U.K., pp. 337-340.

Awolu, O.O and Okedele, Grace Oluwaseun and Ojewumi, M. E. and Oseyemi, Funmilayo Grace (2018) Functional Jam Production from Blends of Banana, Pineapple and Watermelon Pulp. International Journal of Food Science and Biotechnology , 3 (1). pp. 7-14.

Aworinde, Abraham K. and Adeosun, Samson O. and Oyawale, Fetus A and Akinlabi, Esther T. and Emagbetere, Eyere (2018) Mechanical Strength and Biocompatibility Properties of Materials for Bone Internal Fixation: A Brief Overview. In: International Conference on Industrial Engineering and Operations Management, October 29 – November 1, 2018, Pretoria / Johannesburg, South Africa.

Ayedun, C. A. and Durodola, O. D. and Oloyede, S. A. and Akinjare, O. A. and Oni, A.S (2018) AN EMPIRICAL EVALUATION OF THE FACTORS MILITATING AGAINST VALUATION ACCURACY IN NIGERIA. International Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 752-762. ISSN 0976-6316

Ayedun, C. A. and Durodola, O. D. and Oloyede, S. A. and Oni, A.S (2018) The Value Added Tax (VAT) Administration in Nigeria and the Practice of Estate Surveying and Valuation. Covenant Journal of Business & Social Sciences (CJBSS), 9 (1). pp. 1-10.

Ayedun, C. A. and Durodola, O. D. and Oni, A.S and Oluwatobi, A. O. and IKOTUN, Oluwaseun Titilope (2018) THE FLOODING EFFECT ON RESIDENTIAL PROPERTY VALUES: A CASE STUDY OF SHOGUNRO RESIDENTIAL ESTATE, AGEGE;LAGOS STATE NIGERIA. International Journal of Civil Engineering and Technology (IJCIET), 9 (6). pp. 489-496. ISSN 0976-6316

Ayedun, C. A. and Oloyede, S. A. and Oluwunmi, Adedamola O and Akinjare, O. A. (2018) The Role of Education towards Achieving Sustaining Housing and Environmental Development in Nigeria. Covenant Journal of Research in the Built Environment (CJRBE), 6 (1). pp. 65-73.

Ayeni, .A. O. and Daramola, M. O. and Sekoai, Patrick T. and Adeeyo, O.A. and Garba, Musa Joel and Awosusi, A. A. (2018) Statistical modelling and optimization of alkaline peroxide oxidation pretreatment process on rice husk cellulosic biomass to enhance enzymatic convertibility and fermentation to ethanol. Cellulose, 25. pp. 2487-2504.

Ayeni, .A. O. and Daramola, Michael Olawale and Sekoai, .Patrick T. and Adeeyo, O.A. and Garba, Musa Joel and Awosusi, A. A. (2018) Statistical modelling and optimization of alkaline peroxide oxidation pretreatment process on rice husk cellulosic biomass to enhance enzymatic convertibility and fermentation to ethanol. Cellulose, 25. pp. 2487-2504.

Ayoola, A. A. and Adeniyi, Olalekan D. and Sanni, Samuel Eshorame and Osakwe, Kamsiyonna Ikenna and Jato, Jennifer Doom (2018) Investigating production parameters and impacts of potential emissions from soybean biodiesel stored under different conditions. Environ. Eng. Res, 23 (1). pp. 54-61. ISSN pISSN 1226-1025, eISSN 2005-968X

Ayoola, A. A. and Babalola, Rasheed and Ojewumi, M. E. and Fayomi, O. S. I (2018) Assessment of KOH and NaOH Catalysed Biodiesel from Melon Seed Oil. Materials Focus, 7. pp. 1-7.

Ayoola, A. A. and Blessing, Igho E. and Babalola, Rasheed and Ojewumi, M. E. and Ogunbiyi, Ajibola T and Abatan, Olubunmi G. and Fayomi, O. S. I (2018) Production of Biodiesel from Soybean Oil Using Calcium Oxide and Cow Bone as Catalysts. Materials Focus, 7 (4). pp. 542-548.

Ayoola, A. A. and Fayomi, O. S. I and Ogunkanmbi, S.O. (2018) Data on inhibitive performance of chloraphenicol drug on A315 mild steel in acidic medium. Data in Brief, 19. pp. 804-809.

Ayoola, A. A. and Fayomi, O. S. I and Popoola, A. P. I. (2018) Anti-Corrosion and High Temperature Thermal Treatment of SiO2 Crystal Induced on Zinc Electrolyte on Mild Steel. Materials Focus. pp. 1-3.

Ayoola, A. A. and Fayomi, O. S. I and Popoola, A. P. I. (2018) Anticorrosion properties and thin film composite deposition of Zn-SiC-Cr3C2 coating on mild steel. Defence Technology. pp. 1-5.

Ayoola, A. A. and Fayomi, O. S. I and Popoola, A. P. I. (2018) Anticorrosion properties and thin film composite deposition of Zn-SiC-Cr3C2 coating on mild steel. Defence Technology, 15. pp. 106-110.

Ayoola, A. A. and Hymore, F. K. and Ojewumi, M. E. and Uwoghiren, Osayomwanbo J. (2018) Effects of Sodium Hydroxide Concentration on Zeolite Y Synthesized from Elefun Kaolinite Clay in Nigeria. International Journal of Applied Engineering Research, 13 (3). p. 1536. ISSN 0973-4562

Ayoola, A. A. and Igho, E. Blessing and Fayomi, O. S. I (2018) Data on calcium oxide and cow bone catalysts used for soybean biodiesel production. Data in Brief, 18. pp. 512-517.

Ayoola, A. A. and Ojewumi, M. E. and Babalola, Rasheed and James, Ayodele M. (2018) Data on CaO and eggshell catalysts used for biodiesel production. Data in Brief, 19. pp. 1466-1473.

Ayoola, Ayodeji and Babalola, Rasheed and Odunlami, O. A. and Adeeyo, O.A. and Ajibola, Abosede and Nnachortam, Kingsley (2018) ASSESSMENT OF THE POTENTIAL EMISSIONSFROM BIODIESEL PRODUCED FROM GROUNDNUT AND SOYBEAN OILS. International Journal of Research in Engineering and Technology, 7 (5). 57-62. ISSN 2319-1163 | p: 2321-7308

Ayuba, Emmanuel O. and Bolu, Christian and John, Temitope M. and Abioye, Abiodun A. (2018) Dataset showing Steel Cold Rolling Process Parameters for a 6-High Cold Rolling Mill in Nigeria. Data in Brief.

Azeta, Joseph and Bolu, Christian and Abioye, Abiodun A. and Oyawale, Fetus A (2018) A review on humanoid robotics in healthcare. In: MATEC Web of Conferences, 2017.

Azeta, Joseph and Okokpujie, Imhade P. and Okokpujie, Kennedy O. and Salawu, Enesi Y. (2018) ANALYTICAL STUDY OF A ROAD TRAFFIC CONFLICT AT THE T-JUNCTION OF UNIVERSITY OF BENIN MAIN GATE. International Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 1048-1061. ISSN 0976-6316

B

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Kilanko, O. O (2018) Graphical Representations of Experimental and ANN Predicted Data for Mechanical and Electrical Properties of AlSiC Composite Prepared by Stir Casting Method. In: IOP Conf. Series: Materials Science and Engineering.

Babalola, P.O. and Kilanko, O. O and Bolu, Christian and Inegbenebor, A.O. and Oyawale, Fetus A and Adeosun, Oluropo (2018) Empirical Models for Mechanical and Electrical Characteristics of Wrought Aluminium Alloy Reinforced with Silicon Carbide Particles. In: IOP Conf. Series: Materials Science and Engineering.

Babalola, P.O. and Oriyomi, Moses Oluwayimika (2018) The Development of Fume Extractor for a Welding Booth. In: IOP Conf. Series: Materials Science and Engineering.

Babaremu, Kunle and Omodara , M.A and Fayomi, O. S. I and Okokpujie , Imhade P. and Oluwafemi , J. O. (2018) DESIGN AND OPTIMIZATION OF AN ACTIVE EVAPORATIVE COOLING SYSTEM. International Journal of Mechanical Engineering and Technology (IJMET), 9 (10). pp. 1051-1061. ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Babarinde, T.O. and Akinlabi, Stephen A. and Madyira, D. M. and Ohunakin, O.S. and Adelekan, D.S and Oyedepo, Sunday Olayinka (2018) COMPARATIVE ANALYSIS OF THE EXERGETIC PERFORMANCE OF A HOUSEHOLD REFRIGERATOR USING R134a AND R600a. International Journal of Energy for a Clean Environment, 19 (1). ISSN 2150-3621

Babatunde, Damilola Elizabeth and Babatunde, Olubayo Moses and AKINBULIRE, T. 0 and Oluseyi, Peter Olabisi (2018) Hybrid Energy Systems Model with the Inclusion of Energy Efficiency Measures: A Rural Application Perspective. International Journal of Energy Economics and Policy, 8 (4). pp. 310-323. ISSN 2146-4553

Bamigboye, Gideon and Olukanni, D. O. and Adedeji, Adeola A. and Ojewumi, M. E. and Jolayemi, Kayode J. (2018) EXPERIMENTAL AND MODELLING OF FLEXURAL STRENGTH PRODUCED FROM GRANITE-GRAVEL COMBINATION IN SELFCOMPACTING CONCRETE. International Journal of Civil Engineering and Technology (IJCIET), 9 (7). pp. 437-447. ISSN 0976-6308 and ISSN Online: 0976-6316

C

Covenant University, Town and Gown (2018) Town and Gown Seminar Series - Petroleum Engineering. Covenant University. (Unpublished)

D

Dahunsi, S. O. and Oranusi, S. U. and Efeovbokhan, Vincent Enon and Olayanju, Adeniyi and Zahedi, Soraya and Ojediran, John O. and Izebere, John O. and Aladegboye, O.J. (2018) Anaerobic conversion of Chromolaena odorata (Siam weed) to biogas. Energy Reports, 4. pp. 691-700.

Dahunsi, S. O. and Oranusi, S. U. and Efeovbokhan, Vincent Enon and Zahedi, Soraya and Ojediran, John O. and Olayanju, Adeniyi and Oluyori, Abimbola P. and Adekanye, Timothy A. and Izebere, John O. and Enyinnaya, Munachi (2018) Biochemical conversion of fruit rind of Telfairia occidentalis (fluted pumpkin) and poultry manure. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. ISSN 1556-7230

Diaso, Eseoghene R and Enaworu, E. and Seteyeobot, Ifeanyi and Onuh, C.Y (2018) RESERVOIR SIMULATION AND DECLINE CURVE ANALYSIS: A CASE STUDY OF "DER" FIELD, NIGER DELTA BASIN. Petroleum & Coal, 60 (5). pp. 933-942. ISSN 1337-7027

Dirisu, J. O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Mmuokebe, J.I (2018) Performance assessment of the firefighting personal protective tunic. In: Technologies and Materials for Renewable Energy, Environment and Sustainability, 19–21 September 2018, Athens, Greece.

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Okokpujie, Imhade P. and Asere, A.A. and Oyekunle, J.A and Afolalu, Sunday A. and Abioye, Abiodun A. (2018) Effects of Emission Characteristics on Elemental Composition of Selected PVC Ceiling Materials. Materials Focus, 7. pp. 1-7.

Dirisu, Joy Favour and Fayomi, O. S. I and Oyedepo, Sunday Olayinka (2018) Thermal Emission and heat transfer characteristics of ceiling materials: a necessity. In: Technologies and Materials for Renewable Energy, Environment and Sustainability, 19–21 September 2018, Athens, Greece.

Dirisu, Joy Favour and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Okokpujie, Imhade P. and Asere, A.A. and Oyekunle, J.A and Afolalu, Sunday A. and Abioye, Abiodun A. (2018) Effects of Emission Characteristics on Elemental Composition of Selected PVC Ceiling Materials. Materials Focus, 7. pp. 1-7.

Durodola, O. D. and Ayedun, C. A. and Akinjare, Omolade and Oloke, C. Olayinka and Oluwunmi, Adedamola O (2018) HOTEL EFFECTIVENESS INDEX (HEI)DEVELOPMENT FOR BOLSTERING HOTEL GRADING AND CLASSIFICATION IN LAGOS NIGERIA. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 1126-1134. ISSN 0976-6359

E

EKE, WONDERS NDUKA and Covenant University, Theses (2018) PASSENGER FERRY TERMINAL, MILE TWO, LAGOS STATE: ACHIEVING GOOD ACCESSIBILITY THROUGH UNIVERSAL DESIGN. Masters thesis, COVENANT UNIVERSITY.

ENYOMEJI, ADEMU IDAMA and Covenant University, Theses (2018) INVESTIGATING THE VIABILITY OF HYDROGEN PRODUCTION FROM SODIUM BOROHYDRIDE USING ORGANIC ACIDS AND EXTRACTS FROM SPOILT CITRUS FRUIT. Masters thesis, Covenant University.

Ede, A. N. and Olofinnade, O. M. and Awoyera, P. O. (2018) STRUCTURAL FORM WORKS AND SAFETY CHALLENGES: ROLE OF BAMBOO SCAFFOLD ON COLLAPSE OF REINFORCED CONCRETE BUILDINGS IN NIGERIA. International Journal of Civil Engineering and Technology, 9 (9). pp. 1675-1681. ISSN 0976-6308 and ISSN Online: 0976-6316

Edeghe, M. B and Babalola, P.O. (2018) 200 Watts Portable Solar Generator for a Typical Barbing Salon. IOP Conf. Series: Materials Science and Engineering.

Edemirukaye, Ukeh Orodje and Amaize, Peter and Uzairue, Stanley Idiake (2018) Implementation of an RF based wireless automated energy metering and billing system. Cogent Engineering, 5. pp. 1-15.

Ekeinde, Evelyn Bose and Okoro, Emeka Emmanuel and Dosunmu, A. and Iyuke, Sunny E. (2018) Optimizing aqueous drilling mud system viscosity with green additives. Journal of Petroleum Exploration and Production Technology. ISSN 2190-0558

Emetere, Moses and Akinyemi, M. L. and Ojewumi, M. E. (2018) Systemic Study of Aerosol Loading and Retention over Praia-Cape Verde: Satellite and Ground Observation Analysis. Pol. J. Environ. Stud., 27 (1). pp. 1-8.

Emetere, Moses and Akinyemi, M. L. and Ojewumi, M. E. and Muhammad, B. M. (2018) Exploring the challenges confronting the west Africa climate system. International Journal of Engineering & Technology , 7 (3). pp. 1881-1887.

Emetere, Moses and Osunlola, O. I. and Adejumo, A. D. and Dauda, A. O. (2018) Design and Construction of A Domestic Solar Power Bank in a Convective Environment. The Open Fuels & Energy Science Journal, 11. pp. 16-28.

Enesi, Salawu Y and Okokpujie, Imhade P. and Afolalu, Sunday A. and Ajayi, O. O. and Azeta, Joseph (2018) INVESTIGATION OF PRODUCTION OUTPUT FOR IMPROVEMENT. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 915-922. ISSN 2249-8001

Eyitayo, Jesuloluwa S and Badejo, J. A. and Atayero, A. A. (2018) FirstSteps: A mHealth tool for Children Registration and Monitoring. In: International Conference on Computational Science and Computational Intelligence (CSCI), IEEE.

F

FEMI-OKE, OLUTOBI OPEYEMI and Covenant University, Theses (2018) PROPOSED MODERN BUS TERMINAL AT OBALENDE INTERCHANGE, LAGOS. Masters thesis, COVENANT UNIVERSITY.

Fadairo, A. S. A. (2018) Modelling scale saturation around the wellbore for non-Darcy radial flow system. Egyptian Journal of Petroleum. pp. 583-587.

Fadairo, A. S. A. and Ogunkunle, Temitope and Adeyemi, Gbadegesin and Oladepo, Adebowale (2018) A Realistic Model for Estimating Productivity Index of Vertical Well Using Wellhead Data. In: SPE Nigeria Annual International Conference and Exhibition, August 6–8, 2018, Lagos, Nigeria.

Fadairo, A. S. A. and Ogunkunle, Temitope and Adeyemi, Gbadegesin and Oladepo, Adebowale (2018) A Realistic Model for Estimating Productivity Index of Vertical Well Using Wellhead Data. In: Nigeria Annual International Conference and Exhibition, 6-8 August 2018, Lagos, Nigeria .

Fadairo, A. S. A. and Ogunkunle, Temitope and Asuquo, Victor and Oladepo, Adebowale and Lawal, Babajide (2018) Dataset on investigatingnthe effect of sunflower based biodiesel on the rheology of Nigeria waxy crude oil. Data in Brief. pp. 948-953.

Fadairo, A. S. A. and Ogunkunle, Temitope and Oladepo, Adebowale and Adeyemi, Gbadegesin (2018) SUITABILITY OF JATROPHA OIL AS SURFACTANT IN STEAM ASSISTED RECOVERY OF NIGERIA BITUMEN. Petroleum & Coal. pp. 542-547. ISSN 1337-7027

Fadairo, Adesina and Ogunkunle, Temitope and Abraham, V. D. and Oladepo, Adebowale and Lawal, Babajide (2018) Evaluation of the Effects of Nanofluid on the Lubricity of Oil-based Mud. Current Journal of Applied Science and Technology, 28 (6). pp. 1-9. ISSN 2457-1024

Fagbenle, Olabosipo I. and Joshua, Opeyemi and Afolabi, A.O. and Ojelabi, Rapheal A. and Fagbenle, Oluseyi and Fagbenle , Ayoola O. and Akomolafe, Maryam (2018) Cost Management Practice of Construction Firms and Its Influencing Factors: Lessons from Southwestern Nigeria. In: Construction Research Congress.

Fagbenle, Olabosipo I. and Joshua, Opeyemi and Afolabi, A.O. and Ojelabi, Rapheal A. and Fagbenle, Oluseyi and Fagbenle , Ayoola O. and Akomolafe, Maryam (2018) A Framework for Enhancing Contractor-Subcontractor Relationships in Construction Projects in Nigeria. In: Construction Research Congress.

Fakinle, B. S. and Odekanle, Ebenezer Leke and Olalekan, Abiodun Paul and Odunlami, O. A. and Sonibare, Jacob (2018) Impacts of polycyclic aromatic hydrocarbons from vehicular activities on the ambient air quality of Lagosmega. Environ QualManage. pp. 73-78.

Fayom, J. and Popoola, A. P. I. and Fayomi, O. S. I and Babaremu, Kunle (2018) Data on the effect of temperature variation tendency on the inhibitive absorption of Lasienthera africanum in 0.5MHCl: Anecessity. Data in Brief, 20. pp. 2003-2011.

Fayomi, G.U. and Wusu, O. and Mini, S. E. and Fayomi, O. S. I and Kilanko, O. O (2018) Data analysis on the level of exposure to pollutions inindustrial zone: Acasestudy of Ewekoro and Ota Township. Data in Brief, 19. pp. 859-864. ISSN 2352-3409

Fayomi, O. S. I (2018) Effect of functional composite coating developed via sulphate and chloride process parameter on the UNS G10150 steel for structural and wear mitigation in defence application. Defence Technology, 14. pp. 196-203.

Fayomi, O. S. I and AKANDE, I.G and Oluwole, O. O. and Daramola, D. (2018) Effect of water-soluble chitosan on the electrochemical corrosion behaviour of mild steel. Chemical Data Collections, 17 (18). pp. 321-326.

Fayomi, O. S. I and AKANDE, I.G and Popoola, A. P. I. (2018) Corrosion Protection Effect of Chitosan on the Performance Characteristics of A6063 Alloy. Journal of Bio- and Tribo-Corrosion, 4 (73).

Fayomi, O. S. I and Anawe, Paul Apeye Lucky and Ayoola, A. A. and Joseph, O. O (2018) Anti-Corrosion Activities of Apen-Class Inhibitive Drug on Aluminium Alloy in Simulated Chloride Environment. In: AIP Conference Proceedings, 2018.

Fayomi, O. S. I and Anawe, Paul Apeye Lucky and Inegbenebor, A.O. and Udoye, Nduka Ekene (2018) Comparative Assessment Of The Microhardness And Plastic Degradation Mechanism Of deposited Modulated Coatings On Mild Steel. In: AIP Conference Proceedings, 2018.

Fayomi, O. S. I and Atayero, A. A. and Mubiayi, M.P. and AKANDE, I.G and Adewuyi, P. A. and Fajobi, M. A. and Ayara, Williams A. and Popoola, A. P. I. (2018) Mechanical and opto-electrical response of embedded smart composite coating produced via electrodeposition technique for embedded system in defence application. Journal of Alloys and Compounds. ISSN 0925-8388 (In Press)

Fayomi, O. S. I and Ayoola, A. A. and Omoniyi, E. B. and Okolie, S. T. (2018) Influence of aluminum silicate stabilizer on the coating structural composition and characteristics of multifunctional developed composite coating: a buildup for defense application. The International Journal of Advanced Manufacturing Technology.

Fayomi, O. S. I and Daniyan, A.A. and Umoru, L. E. and Popoola, A. P. I. (2018) Data on the effect of current density relationship on the super-alloy composite coating by electrolytic route. Data in Brief, 18. pp. 776-780.

Fayomi, O. S. I and Fayom, J. and Elemike, E.E. (2018) Data on anti-corrosion characteristics of eco-friendly inhibitive extract on the hot corrosion degradation trend of A6063 aluminum alloy in 1.0MHC solution. Data in Brief, 19. pp. 2468-2476.

Fayomi, O. S. I and Kanyane, L.R and Popoola, A. P. I. and Oyedepo, Sunday Olayinka (2018) Electrolytic deposition of super-smart composite coating of Zn-V2O5- NbO2 on low carbon steel for defence application. Defence Technology, 14. pp. 446-450.

Fayomi, O. S. I and Okokpujie, Imhade P. and Kilanko, O. O (2018) Challenges of Research in Contemporary Africa World. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Fayomi, O. S. I and Okokpujie, Imhade P. and Udo, Mfon .O (2018) The Role of Research in Attaining Sustainable Development Goals. In: IOP Conf. Series: Materials Science and Engineering.

Fayomi, O. S. I and Popoola, A. P. I. and Kgoete, F. and Joseph, O. O and Ayoola, A. A. (2018) Experimental study and sustainable surface-active effect of ECA hybrid particulate on tin-zinc infringement coating developed via DAECD technique on AISI 1015 steel. International Journal Nanoparticles, 10 (3). pp. 196-206.

Fayomi, O. S. I and Udoye, Nduka Ekene and Anawe, Paul Apeye Lucky and Inegbenebor, A.O. (2018) The Effect Of Embedded Super Hard Composite On The Production Of Super Hard Materials: Necessity. Materials Focus, 7 (1). pp. 1-5.

Folayan , A. J, and Anawe, Paul Apeye Lucky and Osuolae, F. N. (2018) EFFECT OF PARTICLE THICKNESS AND TEMPERATURE ON THE ENERGY UTILIZATION AND ENERGY UTILIZATION RATIO OF DRYING PROCESS OF ALLIUM CEPA IN A CABINET DRYER. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 1081-1092. ISSN Print: 0976-6340 and ISSN Online: 0976-6359

G

Gbenebor, O. P and Atoba, R. A. and Akpan, Emmanuel I. and Aworinde, Abraham K. and Adeosun, Samson O. and Olaleye, Samuel A. (2018) Study on Polylactide‐Coconut Fibre for Biomedical Applications. In: TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings, 04 February 2018, Online.

Gill, Jatinder and Singh, Jagdev and Ohunakin, O.S. and Adelekan, D.S (2018) Component-wise exergy analysis using adaptive neuro-fuzzy inference system in vapor compression refrigeration system. Journal of Thermal Analysis and Calorimetry, 136. pp. 2111-2123.

Gill, Jatinder and Singh, Jagdev and Ohunakin, O.S. and Adelekan, Damola (2018) Energetic and exergetic analysis of a domestic refrigerator system with LPG as a replacement for R134a refrigerant, using POE lubricant and mineral oil based TiO 2 -, SiO 2 - and Al 2 O 3 -lubricants. International Journal of Refrigeration, 91. pp. 122-135.

I

Ibem, Eziyi O. and Aduwo, B. E. and Uwakonye, O. and Tunji-Olayeni, P .F and Ayo-Vaughan, Emmanuel A. (2018) Survey data one-Procurement adoption in the Nigerian building industry. Data in Brief, 18. pp. 823-826.

Ibhadode, Osagie and Oyedepo, Sunday Olayinka and Ogunro, Steve and Azeta, Joseph and Banjo, SolomonO. and Umanah, I. I. and Apeh, E.S. and Ayoola, A. R. (2018) An Experimental-assessment of Human Exposure-levels to Aircraft Noise-hazards in the Neighbouring-environments of four Nigerian Airports. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Idachaba, F.E. (2018) OUTCOME BASED ENGINEERING CURRICULUM DESIGN: A SYSTEM FOR CURRICULUM STREAMLINING AND GRADUATE QUALITY IMPROVEMENT IN ENGINEERING. In: INTED2018 Conference, 5th-7th March 2018, Valencia, Spain.

Idama, Enyomeji Ademu and Efeovbokhan, Vincent Enon and Alagbe, Edith Egbimhanlu. (2018) Investigating the Viability of Hydrogen Production from Sodium Borohydride Using Acetic Acid and Extracts from Spoilt Lemon, Lime and Orange. In: IOP Conf. Series: Materials Science and Engineering.

Idubor, Scott O. and Noma-Osaghae, Etinosa and Ogbeide, Kingsley O. and Okokpujie, Kennedy O. (2018) A Step Towards Enhancing Spectrum Utilization by Implementing a Spectrum Sensing Cognitive Radio Using an RTL-SDR. International Journal on Communications Antenna and Propagation, 8 (5). pp. 439-447. ISSN 2039 – 5086

Ifijeh, H. A. and Fagbohun, O. Oludare (2018) Modelling And Simulation of Voice Over Internet Protocol (Voip) Over Wireless Local Area Network (WLAN). INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH, 7. pp. 111-118. ISSN 2277-8616

Igwilo, K. C. and Okoro, Emeka Emmanuel and Anawe, Paul Apeye Lucky and Okolie, T. A. Sociis and Aduma, Onisobuana Cyril (2018) FLOW ASSURANCE OPERATIONAL PROBLEMS IN NATURAL GAS PIPELINE TRANSPORTATION NETWORKS IN NIGERIA AND ITS MODELING USING OLGA AND PVTSIM SIMULATORS. Petroleum and Coal, 60 (1). pp. 79-98. ISSN 1337-7027

Igwilo, K. C. and Okoro, Emeka Emmanuel and Nwude, Anthony Afam and Mamudu, Angela Onose and Onuh, C.Y (2018) A Review on Gas Well Optimization Using Production Performance Models—A Case Study of Horizontal Well. Open Journal of Yangtze Gas and Oil, 3. pp. 57-67. ISSN 2473-1900 ISSN Print: 2473-1889

Igwilo, K. C. and Okoro, Emeka Emmanuel and Ubanatu, Samuel (2018) COMPARATIVE APPROACH TO OPTIMUM SELECTION OF ARTIFICIAL LIFT SYSTEM. Petroleum and Coal, 60 (3). pp. 429-437. ISSN 1337-7027

Ikotun, Jacob Olumuyiwa and Okeniyi, Joshua Olusegun and Akinlabi, Esther T. and Akinlabi, Stephen A. and Okeniyi, Joshua Olusegun and OLANREWAJU, Deborah Olukemi and Udoye, Nduka Ekene and Dirisu, J. O. (2018) INVESTIGATION OF OIL DRILL CUTTINGS AS PARTIAL REPLACEMENT OF CEMENTS IN CONCRETE FOR LOW STRENGTH STRUCTURES. International Journal of Civil Engineering and Technology, 9 (11). pp. 2962-2977. ISSN 0976-6308 and ISSN Online: 0976-6316

Ikumapayi, O. M. and Okokpujie, Imhade P. and Afolalu, Sunday A. and Ajayi, O. O. and Akilabi, E. T. and Bodunde, O. P (2018) Effects of Quenchants on Impact Strength of Single-Vee Butt Welded Joint of Mild Steel. In: The 1st International Conference on Engineering for Sustainable World, 2018.

Ilori, T. A and Raji, A. O and Kilanko, O. O (2018) SOME PHYSICAL PROPERTIES OF SELECTED VEGETABLE. Journal of Agricultural and Veterinary Sciences, 2 . pp. 101-109.

Inegbenebor, A.O. and Fayomi, O. S. I and Joshua, Opeyemi and Jolayemi, Kayode J. and Inegbenebor, A. I. and Joseph, O. O (2018) Assessment of Some Clay South West and Aluminmium Dross as Roofing Tile Materials. In: 1st International Conference on Engineering for Sustainable World (ICESW), 2018.

Inegbenebor, A.O. and Okolie, T. A. Sociis and Udoye, Nduka Ekene and Enesi, Salawu Y and Onyisi, Ozuor (2018) Nigeria Vision 20:2020; Review of Current Status Using Re Development and Gross Domestic. In: IOP Conf. Series: Materials Science and Engineering 298, 2018.

Inegbenebor, Adedayo I. and Mordi, Raphael C. and Idowu, Abosede O. and Siyanbola, T. O. and Akanle, B. and Evbuoma, I. K. and Inegbenebor, A.O. (2018) CONSEQUENCES OF THE ACTIVITIES OF A NIGERIAN CEMENT INDUSTRY ON THE ENVIRONMENT. International Journal of Applied and Natural Sciences (IJANS), 7 (4). pp. 67-74. ISSN 2319-4022

Ishola, Felix and Aworinde, Abraham K. and Ajayi, O. O. and Oyawale, Fetus A and Inegbenebor, A.O. (2018) Parameters for Design and Construction of a Pilot Scale Pyrolysis Gas-Furnace. In: International Conference on Industrial Engineering and Operations Management, October 29 – November 1, 2018, Pretoria / Johannesburg, South Africa.

Ishola, Felix and Onwardi, Patrick N. and Atiba, Opemipo E. and Adudu, Blessed E. and Ogunrinola, I. E. and Ndubuisi, A. O. (2018) 2-Dimensional CFD Simulation of a Gas-Fired Pyrolysis Furnace. International Journal of Mechanical Engineering and Technology (IJMET), 9 (12). pp. 383-394. ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Ishola, Felix and Oyawale, Fetus A and Inegbenebor, A.O. and Boyo, H.O. (2018) Design of a high Temperature ‘Anaerobic Gas-Furnace’ suitable for Pyrolysis. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Izobo-Martins, O. and Aduwo, E.B. (2018) INVESTIGATING THE USER’S SATISFACTION OF WOMEN IN KITCHEN DESIGN. International Journal of Mechanical Engineering and Technology (IJMET), 9 (12). pp. 130-138. ISSN 0976-6359

J

JOHNSON, OMETAGHOGHO JIDE and Covenant University, Theses (2018) LAGOS FITNESS CENTRE, IKEJA, LAGOS STATE, NIGERIA UNIVERSAL DESIGN APPROACH TO PLANNING. Masters thesis, COVENANT UNIVERSITY.

Jegede, Foluke and Adewale, B and Aderonmu, P. A and Odeyemi, F (2018) IMPACT OF VISUAL ART TO ARCHITECTURAL DESIGN STUDIO: STUDENT EXPERIENCE OF LOWER AND UPPER CLASSES. In: 10th International Conference on Education and New Learning Technologies, 2-4 July, 2018, Palma, Spain.

Jegede, Foluke and Adewale, B and Olaniyan, Oluwaseun (2018) The Effect of the Environment on Building Finishing Materials in Lagos Island Residential District. In: Organization for Women in Science for Developing World (OWSD) Regional Conference- Africa, Duduville Campus, Kasarani,Kenya..

Jegede, Foluke and Adewale, B. A. and Olaniyan, Oluwaseun (2018) Sustainable Urban Renewal in a World of Smart City Agenda in Natural Commercially Evolving Area: The Case of Lagos Island Residential Districts, Lagos State, Nigeria. In: Africa Smart City Agenda International Conference, University of Lagos Akoka Lagos Nigeria..

Joseph, O. O and Loto, C. A. and Joseph, O. O and Dirisu, J. O. (2018) Comparative Assessment of the Degradation Behaviour of API 5l X65 And Micro-Alloyed Steels in E20 Simulated Fuel Ethanol Environment. In: Technologies and Materials for Renewable Energy, Environment and Sustainability,.

Joshua, Opeyemi and Olusola, K. O and Busari, A. A. and Omuh, I. O. and Ogunde, Ayodeji and Amusan, L. M. and Ezenduka, Chidiogo J. (2018) Data on the pozzolanic activity in coconut shell ash (CSA)for use in sustainable construction. Data in Brief, 18. pp. 1142-1145. ISSN 2352-3409

Joshua, Opeyemi and Olusola, K. O and Fagbenle, Olabosipo I. and Olawuyi, B. J and Adebayo, Lameed and Ogunde, Ayodeji and Afolabi, A.O. and Olorunsola, Segun M. (2018) Pulverized Calcined Clay and Carbide Waste as Alternative Binder in Concrete and Mortar Applications for Sustainable Construction. In: Construction Research Congress.

Joshua, Opeyemi and Olusola, K. O and Oyeyemi , Kehinde D. and Ogunde, Ayodeji and Amusan, L. M. and Nduka, David and Abuka-Joshua, Joyce (2018) Data of the properties of rebar steel brands in Lagos,Nigerian market used in reinforced concrete applications. Data inBrief, 17. pp. 1428-1431.

K

Kamel, H.E.M. and Al-Dobaib, S.N. and Salem, Abdelfattah Z.M. and López, S. and Alaba, Peter Adeniyi (2018) Influence of dietary supplementation with sunflower oil and quebracho tannins on growth performance and meat fatty acid profile of Awassi lambs. Animal Feed Science and Technology. pp. 97-104.

Kgoete, F. and Popoola, A. P. I. and Fayomi, O. S. I (2018) Data on the influence of TiN on wear and corrosion behavior of Ti–6Al–4V alloy fabricated through spark plasma sintering. Data in Brief, 19. pp. 1989-1996. ISSN 2352-3409

Kgoete, F. and Popoola, A. P. I. and Fayomi, O. S. I and Adebiyi, D.I (2018) Influence of Si3N4 on Ti-6Al-4V via spark plasma sintering: Microstructure, corrosion and thermal stability. Journal of Alloys and Compounds. pp. 322-328.

Khawarizmi, Mohd Jafery and Zaidi, Embong and Khee, Yee See and Samsul, Haimi Dahlan and Tajudin, S. A. A. and Ahmad, S. and Sahari, S K and Omeje, Maxwell (2018) Investigation of dielectric constant variations for Malaysians soil species towards its natural background dose. In: IOP Conf. Series: Materials Science and Engineering 298, 2018.

Kilanko, O. O and Ojolo, S.J and Inegbenebor, A.O. and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Onwordi, Patrick Nwanne (2018) Effect of Pre-Shelling Treatment on Physical and Mechanical Properties of Cashew Nut. In: IOP Conf. Series: Materials Science and Engineering.

Kilanko, O. O and Ojolo, S.J and Inegbenebor, A.O. and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Oyedepo, Sunday Olayinka (2018) Design and performance evaluation of centrifugal cashew nut sheller for improving the whole kernel recovery. AgricEnglnt: CIGR, 20 (1). pp. 162-170.

L

Liang, Yao and Wang, Zhenli and Rotimi, Oluwatosin J. and Li, Xueliang and Chen, Guiting and Shi, Hu and Cui, Rui (2018) Fracture characterization using diffraction attributes in tight sandstone reservoirs: A case study from Keshen Gas Field, Tarim Basin. Society of Exploration Geophysicists. ISSN 1949-4645

Loto, R. T. (2018) COMPARATIVE ANALYSIS OF ELECTROCHEMICAL CORROSION BEHAVIOR AND INHIBITION OF 2101 DUPLEX AND 301 AUSTENITIC STAINLESS STEEL IN 4-CYANOBENZENE/6M H2SO4 SOLUTION. Journal of Chemical Technology and Metallurgy, 53 (2). pp. 311-323.

Loto, R. T. (2018) Inhibition Studies of the Synergistic Effect of Rosemary oil and Zinc oxide on S41003 Ferritic Steel Corrosion in Dilute Sulphuric and Hydrochloric Acid Solutions. ORIENTAL JOURNAL OF CHEMISTRY, 34 (1). pp. 240-254. ISSN 0970-020 X

Loto, R. T. (2018) Surface coverage and corrosion inhibition effect of Rosmarinus officinalis and zinc oxide on the electrochemical performance of low carbon steel in dilute acid solutions. Results in Physics, 8. pp. 172-179.

Loto, R. T. and Babalola, P.O. (2018) Analysis of SiC grain size variation and NaCl concentration on the corrosion susceptibility of AA1070 aluminium matrix composites. Cogent Engineering, 5.

Loto, R. T. and Babalola, P.O. (2018) Effect of alumina nano-particle size and weight content on the corrosion resistance of AA1070 aluminum chloride/sulphate solution. Results in Physics. pp. 731-737.

Loto, R. T. and Babalola, P.O. (2018) Effect of alumina nano-particle size and weight content on the corrosion resistance of AA1070 aluminum in chloride/sulphate solution. Results in Physics, 10. pp. 731-737.

Loto, R. T. and Loto, C. A. (2018) Anti-corrosion properties of the symbiotic effect of Rosmarinus officinalis and trypsin complex on medium carbon steel. Results in Physics, 10. pp. 99-106.

Loto, R. T. and Loto, C. A. (2018) Corrosion behaviour of S43035 ferritic stainless steel in hot sulphate/chloride solution. Journal of Materials Research and Technology, 7 (3). pp. 231-239.

Loto, R. T. and Loto, C. A. and Ayozie, Bryan and Sanni, T.F. (2018) Anti-corrosion Properties of Rosemary Oil and Vanillin on Low Carbon Steel in Dilute Acid Solutions. In: 147th Annual Meeting & Exhibition.

Loto, R. T. and Loto, C. A. and McPepple, Alexander and Olanrewaju, Gabriel and Olaitan, Akanji Lukman (2018) Synergistic Effect of Benzonitrile and Benzothiazole on the Corrosion Inhibition of 316 Stainless Steel in 6M HCl Solution. In: 147th Annual Meeting & Exhibition.

Loto, R. T. and Olowoyo, Oluwatobiloba (2018) Corrosion inhibition properties of the combined admixture of essential oil extracts on mild steel in the presence of SO4 2− anions. South African Journal of Chemical Engineering, 26. pp. 35-41.

Loto, R. T. and Olowoyo, Oluwatobiloba (2018) Corrosion inhibition properties of the combined admixture of essential oilextracts on mild steel in the presence of SO42−anions. South African Journal of Chemical Engineering, 26. pp. 35-41.

M

Matthews, V. O. and Adekitan, Aderibigbe I. and Uzairue, Stanley Idiake and Noma- Osaghae, Etinosa (2018) Wireless Intelligent Electricity Metering and Billing System (WIMBIS). International Journal of Engineering and Techniques, 4 (4). pp. 57-61. ISSN 2395-1303

Matthews, V. O. and Adekitan, Aderibigbe I. and Uzairue, Stanley Idiake and Noma-Osaghae, Etinosa (2018) Wireless Intelligent Electricity Metering and Billing System (WIMBIS). Wireless Intelligent Electricity Metering and Billing System (WIMBIS), 4 (4). pp. 57-61. ISSN 2395-1303

Matthews, V. O. and Noma-Osaghae, Etinosa and Uzairue, Stanley Idiake (2018) An Analytics Enabled Wireless Anti-Intruder Monitoring and Alarm System. IJSRSET, 4 (9). 05-11. ISSN 2394-4099

Matthews, V. O. and Noma-Osaghae, Etinosa and Uzairue, Stanley Idiake (2018) An Intelligent In -Vehicle Wireless Multilingual Over-Speed Announcer and Reporter. International Research Journal of Engineering and Technology, 05 (08). pp. 285-288. ISSN 2395-0056

Matthews, V. O. and Noma-Osaghae, Etinosa and Uzairue, Stanley Idiake (2018) RFID Enabled Arms and Ammunition Depot Management System with Human Tracking Capacity. RFID Enabled Arms and Ammunition Depot Management System with Human Tracking Capacity, 9 (7). pp. 166-171. ISSN 2229-5518

Matthews, V. O. and Noma-Osaghae, Etinosa and Uzairue, Stanley Idiake (2018) RFID Enabled Arms and Ammunition Depot Management System with Human Tracking Capacity. International Journal of Scientific & Engineering Research, 9 (7). pp. 166-171. ISSN 2229-5518

Matthews, V. O. and Noma-Osaghae, Etinosa and Uzairue, Stanley Idiake and Awolalu, Omoseye (2018) A Solar Powered Smart Travelling Bag With An Embedded Video/Audio Player. International Journal of Recent Trends in Engineering & Research, 4 (7). pp. 148-157. ISSN 2455–1457

Matthews, V. O. and Noma-Osaghae, Etinosa and Uzairue, Stanley Idiake and Obatoki , Ireoluwa (2018) A Wireless RFID Based Document Management System. A Wireless RFID-Based Document Management System, 7 (7). pp. 18-22. ISSN 2278-7763

Matthews, V. O. and Noma-Osaghae, Etinosa and Uzairue, Stanley Idiake and Popoola, Segun I. (2018) A Wireless Semi-Humanoid Solar Powered Robomower. A Wireless Semi-Humanoid Solar Powered Robomower, 45 (1). pp. 96-107. ISSN 2313-4402

Matthews, V. O. and Uzairue, Stanley Idiake and Etinosa-Okankan, O. J and Uzairue, Stanley Idiake and Enefiok, Morgan Kubiat (2018) Implementation of a Community Emergency Security Alert System. International Journal of Innovative Science and Research Technology, 3 (6). pp. 475-483. ISSN 2456-2165

Matthews, V. O. and Uzairue, Stanley Idiake and Noma-Osaghae, Etinosa (2018) Analysis and Implementation of Fiber to the Home Network Using Peace Estate Lagos as a Case Study. International Journal of Science Technology Management and Research, 3 (8). pp. 1-4. ISSN 2456-0006

Matthews, V. O. and Uzairue, Stanley Idiake and Noma-Osaghae, Etinosa and Akindele, Ayoola (2018) A Solar Powered Mini Smart e-Podium with a Wireless Lecture Transmitter. International Journal of Innovations in Engineering Research and Technology, 5 (8). pp. 25-31. ISSN 2394-3696

Matthews, V. O. and Uzairue, Stanley Idiake and Noma-Osaghae, Etinosa and Nwukor, Frances (2018) Design and Simulation of a Smart Traffic System in a Campus Community. Journal of Emerging Technologies and Innovative Research (JETIR), 5 (7). pp. 492-497. ISSN 2349-5162

Matthews, V. O. and Uzairue, Stanley Idiake and Noma-Osaghae, Etinosa and Okunoren, Anjolaoluwa and Akwawa, Lucy (2018) Design and Construction of a Smart Wireless Access/Ignition Technique for Automobile. International Journal for Research in Applied Science & Engineering Technology, 6 (8). pp. 165-173. ISSN 2321-9653

Matthews, Victor O. and Uzairue, Stanley Idiake and Noma-Osaghae, Etinosa and Enefiok, Morgan Kubiat and Ogukah, Praise Jude (2018) Implementation of a Community Emergency Security Alert System. Implementation of a Community Emergency Security Alert System, 3 (6). pp. 475-483. ISSN 2456-2165

Michael, E. and Liman, A.D. and Adimula, G.M. and Fajobi, M. A. and Abioye, Abiodun A. (2018) Development of Automatic Switch using PIR and SSR for Day and Night Detection. Covenant Journal of Engineering Technology (CJET), 1 (1). pp. 47-57.

N

Nduka, David and Ameh, Oko John and Joshua, Opeyemi and Ojelabi, Rapheal A. (2018) Awareness and Benefits of Self-Curing Concrete in Construction Projects: Builders and Civil Engineers Perceptions. buildings, 8. pp. 1-16.

Nduka, David and Ogunbayo , Babatunde F and Ajao, Adekunle M and Ogundipe , Kunle and Babalola, Benjamin (2018) Survey datasets on sick building syndrome: Causes and effects on selected public buildings in Lagos, Nigeria. Data in Brief, 20. pp. 1340-1346.

Nduka, David and Sotunbo, Adeboyega S. and Ibrahim, Idris Adedapo and Joshua, Opeyemi and Tunji-Olayeni, P .F and Akinbile, Bolatito (2018) Survey dataset on professional's perception on site supervision and project performance. Data in Brief, 18. pp. 1758-1764.

Nkhwashu, Makhanana Innocent and Moropeng, Mapula Lucey and Agboola, Oluranti and Kolesnikov, Andrei and Mavhungu, Avhafunani (2018) The application of the numeral method of lines on carbon dioxide captures process: Modelling and simulation. Journal of King Saud University – Science.

Nkhwashu, Makhanana Innocent and Moropeng, Mapula Lucey and Agboola, Oluranti and Mavhungu, Avhafunani and Kolesnikov, Andrei (2018) DETERMINING THE ABSORPTION EFFICIENCY OF THE SOLVENT ABSORBENTS IN CARBON DIOXIDE CAPTURE PROCESS BY APPLYING THE NUMERICAL METHOD OF LINES. International Journal of Advances in Science Engineering and Technology, 6 (2). pp. 67-70. ISSN 2321 –8991, ISSN(e): 2321 –9009

Nwanji, E. C and Babalola, P.O. (2018) Synthesizing a Metal Matrix Composite (Al- Al2O3) from Aluminium (AA1237) Reinforced with Alumina (Al2O3) Particulates. In: IOP Conf. Series: Materials Science and Engineering.

Nwanya , Stephen and Oluseyi, O. Ajayi and Ishola, Felix and Achebe , Celestine (2018) Process Variability Analysis of License Vehicle Number Plate Production in Nigeria. In: International Conference on Industrial Engineering and Operations Management, March 8-10, 2016, Kuala Lumpur, Malaysia.

Nwoke , Obinna N. and Okoli , Okechukwu S and Okokpujie, Imhade P. and Okoro , Uduma I. (2018) Criticality of Computer Aided Design Packages in Engineering Education & Professionalism for the Developing Countries. In: 2018 BIENNIAL ENGINEERING CONFERENCE AND EXHIBITION AKANU IBIAM FEDERAL POLYTECHNIC, UNWANA, 12-16 August 2018, AKANU IBIAM FEDERAL POLYTECHNIC, UNWANA.

O

OGUNLEYE, OLUWASIKEMI GLORIA and Covenant University, Theses (2018) THE ENERGY CONSUMPTION PATTERNS OF AC AND DC SOURCES OF ENERGY VIEWED FROM THE PERSPECTIVES OF COST AND EFFICIENCY. Masters thesis, COVENANT UNIVERSITY.

OLAFADEHAN, O. A. and Akpo, O. Y. and Enemuo, O. and Amoo, Kehinde O. and Abatan, Olubunmi G. (2018) Equilibrium, kinetic and thermodynamic studies of biosorption of zinc ions from industrial wastewater using derived composite biosorbents from walnut shell. African Journal of Environmental Science and Technology, 12 (9). pp. 335-356. ISSN 1996-0786

OLAFADEHAN, O. A. and Sunmola, Opeyemi Praise and Adeleke, Jaiyeola and Efeovbokhan, Vincent Enon and Abatan, Olubunmi G. (2018) Modelling and simulation of an industrial RFCCU‑riser reactor for catalytic cracking of vacuum residue. Applied Petrochemical Research, 8. pp. 219-237.

OLUWAFEMI, JOHN OLUWATOBI and Covenant University, Theses (2018) PROBABILISTIC SEISMIC HAZARD ANALYSIS AND THE SIMULATED RESPONSE OF BUILDINGS TO EARTHQUAKE IN NIGERIA. Masters thesis, COVENANT UNIVERSITY.

Obafemi, Yemisi Dorcas and Taiwo, O. S. and Omodara, O. J. and Dahunsi, S. O. and Oranusi, S. U. (2018) Biodegradation of crude petroleum by bacterial consortia from oil-contaminated soils in Ota, Ogun State, South-Western, Nigeria. Environmental Technology & Innovation, 12. pp. 230-242.

Obanla, O. R. and Bababtunde, D. E. and Ogunbiyi, Ajibola T and Oladimeji, Temitayo E, and Ifepe, M. I. (2018) Biodiesel Washing Water Treatment Using Zeolite and Activated Carbon as Adsorbents. International Journal of Engineering and Applied Sciences (IJEAS), 5 (3). pp. 124-126. ISSN 2394-3661

Obanla, O. R. and Bababtunde, D. E. and Ogunbiyi, Ajibola T and Oladimeji, Temitayo E, and Ifepe, M. I. (2018) Biodiesel Washing Water Treatment using Zeolite and Activated Carbon as Adsorbents. International Journal of Engineering and Applied Sciences (IJEAS), 5 (3). pp. 124-126. ISSN 2394-3661

Obi, Obiora Jeffery (2018) COLLEGE OF BUILT ENVIRONMENT, COVENANT UNIVERSITY, CANAANLAND, OTA, OGUN STATE, NIGERIA (ARCHITECTURAL DESIGN FOR PRODUCTIVE LEARNING BEHAVIOUR). Masters thesis, Covenant University Ota..

Ochie, Karem Ifeoma and Rotimi, Oluwatosin J. (2018) Reservoir, Simulation, Lithofacies, Porosity, Heterogeneity, Discontinuities, Geostatistics. In: Nigeria Annual International Conference and Exhibition, 6-8 August 2018, Lagos, Nigeria .

Ode, Samson and Okoro, Emeka Emmanuel and Ekeinde, Evelyn Bose and Dosunmu, A. (2018) Modelling of Sub-Sea Gas Transmission Pipeline to Predict Insulation Failure. The Open Petroleum Engineering Journal, 11. pp. 67-83. ISSN 1874-8341/18

Odun-Ayo, Isaac and Ajayi, Olasupo and Misra, Sanjay (2018) Cloud Computing Security: Issues and Developments. In: World Congress on Engineering, July 4-6, 2018, London, U.K..

Odun-Ayo, Isaac and Okereke, Chinonso and Orovwode, H. E. (2018) Cloud Computing and Internet of Things: Issues and Developments. In: World Congress on Engineering, London, U.K., World Congress on Engineering.

Odun-Ayo, Isaac and Okereke, Chinonso and Orovwode, H. E. (2018) Cloud and Application Programming Interface – Issues and Developments. In: World Congress on Engineering, London, U.K., July 4-6, 2018.

Odunlami, O. A. and Elehinafe , F. Boluwaji and Okorie, C. G. and Abioye, Oluwabunmi P. and Abioye, Abiodun A. and Fakinle, B. S. (2018) ASSESSMENT OF IN-TRICYCLE EXPOSURE TO CARBON MONOXIDE EMISSION ON ROADS IN NIGERIAN URBAN CENTRES. International Journal of Mechanical Engineering and Technology (IJMET), 9 (9). pp. 671-684. ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Odunlami, O. A. and Elehinafe , F. Boluwaji and Oladimeji, Temitayo E, and Fajobi, M. A. and Akeredolu, F. A. and Okedere, O. B. and Fakinle, B. S. (2018) IMPLICATIONS OF LACK OF MAINTENANCE OF VEHICLES ON AMBIENT AIR QUALITY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (9). pp. 647-654. ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Odunlami, O. A. and Elehinafe , F. Boluwaji and Oladimeji, Temitayo E, and Fajobi, M. A. and Okedere, O.B and Fakinle, B. S. (2018) Implications of Lack of Maintenance of motorcycles on Ambient Air Quality. International Journal of Mechanical Engineering and Technology (IJMET), 9 (9). 647 -654. ISSN 0976-6359

Odunlami, O. A. and Elehinafe , F. Boluwaji and Pearl, A. A. and Abatan, Olubunmi G. and Mamudu, Angela Onose (2018) ASSESSMENT OF CARBON MONOXIDE EMISSION FROM DIFFERENT BRANDS OF SPLIT AIR-CONDITIONERS. International Journal of Mechanical Engineering and Technology (IJMET), 9 (9). pp. 655-662. ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Ogunbayo , Babatunde F and Ajao, Adekunle M and ALAGBE, Oluwole T. and Ogundipe , Kunle Elizah and Tunji-Olayeni, P .F and Ogunde, Ayodeji (2018) RESIDENTS’ FACILITIES SATISFACTION IN HOUSING PROJECT DELIVERED BY PUBLIC PRIVATE PARTNERSHIP (PPP) IN OGUN STATE, NIGERIA. International Journal of Civil Engineering and Technology (IJCIET), 9 (1). pp. 562-577. ISSN 0976-6316

Ogunbayo , Babatunde F and Ajao, Adekunle M and Ogundipe , Kunle Elizah and Joshua, Opeyemi and Durotoye, Taiwo Omowunmi and Bamigboye, Gideon (2018) Study of aggregate dormancy and its effects on the properties of aggregates and concrete. Cogent Engineering, 5. pp. 1-11.

Ogunbiyi, Ajibola T and Ehinmowo, A. B. and Sanni, Samuel Eshorame and Yeung, Hoi (2018) Passive Slug Attenuation Device: Potential and Operability. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Ogunde, Ayodeji and Ademola, A. and Omuh, I. O. and Owolabi, J. D and Ayedun, C. A. and OGUNDE, Abisola (2018) INTEGRATION OF SOFTWARE TO IMPROVE THE QUALITY OF PROJECT DELIVERY: HOW EFFECTIVE? International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 660-668. ISSN 0976-6359

Ogunde, Ayodeji and Ayodele, Rachael and Joshua, Opeyemi and Nduka, David and OGUNDE, Abisola and Ogundipe , Kunle Elizah and Ogunbayo , Babatunde F and Ajao, Adekunle M (2018) Data on factors influencing the cost,time performance of the Industrialized Building System. Data in Brief, 18. pp. 1394-1399. ISSN 2352-3409

Ogundipe , Kunle Elizah and Ogunbayo , Babatunde F and Ajao, Adekunle M and Ogundipe, Uyoyoghene Love and Tunji-Olayeni, P .F (2018) Survey data set sonc ategories of factors militating against safety practice son construction sites. Data in Brief, 19. pp. 2071-2078. ISSN 2352-3409

Ogunkunle, T.F. and Isehunwa, Sunday and Orodu, O. D. and Seteyeobot, Ifeanyi (2018) Uncertainty assessment of onset sand prediction model for reservoir applications. Cogent Engineering. pp. 1-14. ISSN 4: 1376488

Ogunrinola, I. E. and Akinyemi, M. L. and Boyo, H.O. and Maxwell, Omeje and Akinpelu, A. and Arijaje, Theophilus E. (2018) Evolvement of Thermal Energy Storage Systems. In: 2nd International Conference on Science and Sustainable Development, 2018.

Ohijeagbon, I. O. and lasode, O.A. and Adebayo, Segun and Ajayi, O. O. and Omotosho, Olugbenga Adeshola (2018) Data on drying kinetics of a semi-automated gas-fired fish dryer. Data in Brief. pp. 641-647.

Ohunakin, O.S. and Adaramola, Muyiwa S and Oyewola, Olanrewaju M. and Fagbenle, R. O. and Adelekan, D.S and Gill, Jatinder and Abam, Fidelis I. (2018) Photovoltaic performance prediction in Northern Nigeria using generated typical meteorological year dataset. African Journal of Science, Technology, Innovation and Development, 10 (5). ISSN 2042-1346

Ojelabi, Rapheal A. and Afolabi, A.O. and Omuh, I. O. and Tunji-Olayeni, P .F (2018) EXPLORING SOCIAL-ENTREPRENEURS’CONTRIBUTION IN SOCIAL INFRASTRUCTURAL PROCUREMENT IN DEVELOPING SUSTAINABLE COMMUNITIES. International Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 1424-1433. ISSN 0976-6316

Ojelabi, Rapheal A. and Afolabi, A.O. and Oyeyipo, Opeyemi and Tunji-Olayeni, P .F and AdewalE, Bukola A. (2018) Data exploration of social client relationship management(CRM 2.0)adoption in the Nigerian construction business. Data in Brief, 18. 1471-1476.

Ojelabi, Rapheal A. and Afolabi, A.O. and Oyeyipo, Opeyemi and Tunji-Olayeni, P .F and Adewale , B. A. (2018) Data exploration of social client relationship management (CRM2.0) adoption in the Nigerian construction business. Data in Brief, 18. pp. 1471-1476.

Ojelabi, Rapheal A. and Fagbenle, Olabosipo I. and Afolabi, A.O. and Tunji-Olayeni, P .F and Amusan, L. M. (2018) Appraising the Barriers to Public-Private Partnership as a Tool for Sustainable Development of Infrastructures in a Developing Economy. In: IOP Conf. Series: Earth and Environmental Science.

Ojelabi, Rapheal A. and Oyeyipo, Opeyemi and Afolabi, A.O. and Amusan, L. M. (2018) Presence of Social Client Relationship Management within the Nigerian Construction Industry. Buildings. pp. 1-15.

Ojewumi, M. E. (2018) A Bioremediation Study of Raw and Treated Crude Petroleum Oil Polluted Soil with Aspergillus niger and Pseudomonas aeruginosa. Journal of Ecological Engineering , 19 (2). pp. 226-235.

Ojewumi, M. E. (2018) Effects of Salting and Drying on the Deterioration Rate of Fermented Parkia biglobosa Seed. Journal of Nutritional Health & Food Engineering, 8 (1). pp. 1-5.

Ojewumi, M. E. (2018) The Ex-Situ Bioremediation Kinetics of Raw and Treated Crude Oil Polluted Soil Using Aspergillus Niger and Pseudomonas Aeruginosa. MDPI, 2 (8). pp. 1-17. ISSN doi:10.20944/preprints201806.0359.v1

Ojewumi, M. E. and Adedokun, Samuel Oluwafunsho and Ayoola, A. A. and Taiwo, O. S. (2018) Evaluation of the oil Extract from Mentha spicata and its Chemical Constituents. PONTE. (In Press)

Ojewumi, M. E. and Adeeyo, O.A. and Akingbade, Oluwaseun Mary and Babatunde, Damilola Elizabeth and Ayoola, A. A. and Awolu, O.O and Ojewumi, E.O. and Omodara, O. J. (2018) EVALUATION OF GLUCOSE SYRUP PRODUCED FROM CASSAVA HYDROLYZED WITH MALTED GRAINS (RICE, SORGHUM & MAIZE). International Journal of Pharmaceutical Sciences and Research , 9 (8). pp. 1000-1011. ISSN E-ISSN: 0975-8232; P-ISSN: 2320-5148

Ojewumi, M. E. and Adeyemi , A.O. and Ojewumi, E.O. (2018) OIL EXTRACT FROM LOCAL LEAVES - AN ALTERNATIVE TO SYNTHETIC MOSQUITO REPELLANTS. Pharmacophore, 9 (2). pp. 1-6. ISSN 2229-5402

Ojewumi, M. E. and Akwayo, Iniobong Job and Taiwo, O. S. and Obanla, Oyinlola Mopelola and Ayoola, A. A. and Ojewumi, E.O. and Oyeniyi, Esther Adenike (2018) Bio-Conversion of Sweet Potato Peel Waste to BioEthanol Using Saccharomyces Cerevisiae. Bio-Conversion of Sweet Potato Peel Waste to BioEthanol Using Saccharomyces Cerevisiae , 8 (3). pp. 46-54. ISSN (Online) 2249-6084 (Print) 2250-1029

Ojewumi, M. E. and Emetere, Moses and Amaefule, C. V. and Durodola, B. M. and Adeniyi, Olalekan D. (2018) BIOCONVERSION OF ORANGE PEEL WASTE BY ESCHERICHIA COLI AND SACCHAROMYCES CEREVISIAE TO ETHANOL. International Journal of Pharmaceutical Sciences and Research . ISSN E-ISSN: 0975-8232; P-ISSN: 2320-5148 (In Press)

Ojewumi, M. E. and Obielue, Barbra Ijeoma and Emetere, Moses and Awolu, O.O and Ojewumi, E.O. (2018) Alkaline Pre-Treatment and Enzymatic Hydrolysis of Waste Papers to Fermentable Sugar. Journal of Ecological Engineering, 19 (1). pp. 211-217.

Ojewumi, M. E. and Okeniyi, Joshua Olusegun and Ikotun, Jacob Olumuyiwa and Okeniyi, Elizabeth Toyin (2018) Bioremediation: Data on Pseudomonas aeruginosa Effects on the Bioremediation of Crude Oil Polluted Soil. Data in Brief .

Ojewumi, M. E. and Okeniyi, Joshua Olusegun and Okeniyi, Elizabeth Toyin and Ikotun, Jacob Olumuyiwa and Ejemen, Valentina Anenih and Akinlabi, Esther T. (2018) Bioremediation: Data on Biologically-Mediated Remediation of Crude Oil (Escravos Light) Polluted Soil using Aspergillus niger. Chemical Collection Data.

Ojewumi, M. E. and Omoleye, James and Ajayi, A. A. (2018) Phenomenological Model of Percentage Protein in fermented Iru (Parkia biglobosa). Phenomenological Model of Percentage Protein in fermented Iru (Parkia biglobosa) .

Ojewumi, M. E. and Omoleye, James and Emetere, Moses and Ayoola, A. A. and Obanla, O. R. and Babatunde, E. B. and Ogunbiyi, Ajibola T and Awolu, O.O and Ojewumi, E.O. (2018) Effect of various temperatures on the nutritional compositions of fermented African locust bean (Parkia biglobosa) seed. International Journal of Food Science and Nutrition, 3 (1). pp. 117-122. ISSN 2455-4898

Ojewumi, M. E. and Omoleye, James and Emetere, Moses and Ayoola, A. A. and Obanla, Oyinlola Mopelola and Babatunde, Damilola Elizabeth and Ogunbiyi, Ajibola T and Awolu, O.O and Ojewumi, E.O. (2018) Effect of various temperatures on the nutritional compositions of fermented African locust bean (Parkia biglobosa) seed. International Journal of Food Science and Nutrition, 3 (1). pp. 117-122. ISSN 2455-4898

Ojewumi, M. E. and Oyeyemi, Kayode Gbolahan and Emetere, Moses and Okeniyi, Joshua Olusegun (2018) Data on the rheological behavior of cassava starch paste using different models. Data in Brief. ISSN 2352-3409

Okedere, O. B. and Rabiu, K. O. and Elehinafe, F. Boluwaji (2018) EFFECT OF CONE INCLINATION ON EFFICIENCY OF CYCLONE SEPARATORS. Researchgate.

Okeniyi, Joshua Olusegun and Popoola, A. P. I. and Ojewumi, M. E. and Okeniyi, Elizabeth Toyin and Ikotun, Jacob Olumuyiwa (2018) Tectona grandis Capped Silver-Nanoparticle Material Effects on Microbial Strains Inducing Microbiologically Influenced Corrosion. International Journal of Chemical Engineering, 2018. pp. 1-6.

Okesola, Olatunji J. and Okokpujie, Kennedy O. and Oyom, Paul R. and Olamide , Kalesanwo and Oludele , Awodele and Afolashade , Kuyoro (2018) Structuring Challenges in Requirement Engineering Techniques. In: "Structuring Challenges in Requirement Engineering Techniques," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2018,. 4-6 July, 2018, London, U.K., pp. 197-200.

Okoji, Anthony I. and Babatunde, Damilola Elizabeth and Anozie, Ambrose Nwora and Omoleye, James (2018) Thermodynamic Analysis of Raw Mill in Cement Industry Using Aspen Plus Simulator. In: IOP Conf. Series: Materials Science and Engineering 298, 2018.

Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O and Okonkwo , Ugochukwu C. and Orodu, Kale B. and Ikumapayi, O. M. (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Okokpujie, Imhade P. and Ohunakin, O.S. and Bolu, Christian and Okokpujie, Kennedy O. (2018) Experimental data-set for prediction of tool wear during turning of Al-1061alloy by high speed steel cutting tools. Data in Brief, 18. pp. 1196-1203. ISSN 2352-3409

Okokpujie, Imhade P. and Okokpujie, Kennedy O. and Nwoke , Obinna N. and Azeta, Joseph (2018) Design and Implementation of 0.5kw Horizontal Axis Wind Turbine for Domestic Use. In: Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2018. London, U.K, pp. 650-655.

Okokpujie, Kennedy O. and Anicho-Okoro, Chiamaka and Okokpujie, Imhade P. and Okesola, Julius-Olatunji (2018) Implementation of an Embedded Masked Face Recognition System using Huskylens System-On-Chip Module. IEEE NIGERCON, 8 (5). ISSN 2039 – 5086

Okokpujie, Kennedy O. and Chukwu , Emmanuel and Noma-Osaghae, Etinosa and Odusanmi, Modupe and Okokpujie, Imhade P. (2018) A UNIQUE MATHEMATICAL QUEUING MODEL FOR WIRED AND WIRELESS NETWORKS. International Journal of Civil Engineering and Technology (IJCIET), 9 (9). pp. 810-831. ISSN 0976-6316

Okokpujie, Kennedy O. and Noma‐Osaghae, Etinosa and Okesola, Olatunji J. and Omoruyi, Osemwegie and Okereke, Chinonso and Okokpujie, Imhade P. (2018) Fingerprint Biometric Authentication Based Point of Sale Terminal. In: International Conference on Information Science and Applications, 24 July 2018, Online:.

Okokpujie, Kennedy O. and Shobayo, Olamilekan and Noma-Osaghae, Etinosa and Okokpujie, Imhade P. and Okoyeigbo, Obinna (2018) Performance of MPLS-based Virtual Private Networks and Classic Virtual Private Networks Using Advanced Metrics RECOGNITION TECHNOLOGY. TELKOMNIKA, 16 (5). pp. 2073-2081.

Okokpujie , Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O and Okonkwo , Ugochukwu C. and Orodu, Kale B. and Ikumapayi, O. M. (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Okokpujie , Imhade P. and Salawu, Enesi Y. and Nwoke , Obinna N. and Okonkwo , Ugochukwu C. and Ohijeagbon, I. O. and Okokpujie, Kennedy O. (2018) Effects of Process Parameters on Vibration Frequency in Turning Operations of Perspex Material. In: Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2018. London, U.K, pp. 700-707.

Okoro, Emeka Emmanuel and Deinpribo , Kio-Lawson and Igwilo, K. C. and Ekeinde, Evelyn Bose (2018) One stage process removal of filter cake using micro-emulsion. International Journal of Engineering & Technology , 7 (4). 2890 -2894.

Okoro, Emeka Emmanuel and Dosunmu, A. and Iyuke, Sunny E. (2018) Data on cost analysis of drilling mud displacement during drilling operation. Data in Brief, 19. pp. 535-541.

Okoro, Emeka Emmanuel and Ekeinde, Evelyn Bose and Igwilo, K. C. and Dosunmu, Adewale (2018) GAS PROCESS SYSTEM EMPIRICAL TOOL FOR PREDICTING HYDRATE FORMATION. Petroleum and Coal, 60 (2). pp. 236-243. ISSN 1337-7027

Okoro, Emeka Emmanuel and Igwilo, K. C. and Ifeka, Kelvin and Okafor, Ikechukwu and Sangotade, Idowu (2018) Cellulosic Cyperus esculentus L. as a filtrate loss modifier in field applicable aqueous and non-aqueous drilling fluids. Journal of Petroleum Exploration and Production Technology. ISSN 2190-0558

Okoro, Emeka Emmanuel and Igwilo, K. C. and Mamudu, Angela Onose and Ekeinde, Evelyn Bose and Dosunmu, Adewale (2018) Data on shale-water based drilling ﬂuid interaction for drilling operation. Data in Brief, 19. pp. 1620-1626. ISSN 2352-3409

Okoro, Emeka Emmanuel and Igwilo, K. C. and Orodu, Kale B. (2018) A review on waste to biogas sources and its potential in Nigeria. International Journal of Engineering & Technology, 7 (4). pp. 5960-5966.

Okoro, Emeka Emmanuel and Omobhude, S. and Igwilo, K. C. and Ekeinde, Evelyn Bose and Dosunmu, A. (2018) Estimation of Flow Capacity in Pipelines Based on the Intrinsic Variation of the Volumetric Properties of the Natural Gas Mixture. Petroleum & Petrochemical Engineering Journal, 2 (4).

Okwuobi, Samuel and Ishola, Felix and Ajayi, O. O. and Salawu, Enesi Y. and Aworinde, Abraham K. and Olatunji , Obafemi and Akinlabi, Stephen A. (2018) A Reliability-Centered Maintenance Study for an Individual Section-Forming Machine. Machines, 6 (50).

Olabode, O.A. and Orodu, O. D. and Isehunwa, Sunday and Mamudu, Angela Onose and Rotimi, Tosin (2018) Effect of foam and WAG (water alternating gas) injection on performance of thin oil rim reservoirs. Journal of Petroleum Science and Engineering, 171. pp. 1443-1454.

Oladimeji, Temitayo E, and Nnamah, C. G. and Obanla, O. M. and Odunlami, O. A. and Abatan, Olubunmi G. (2018) A COMPARATIVE ANALYSIS ON THE CLARIFICATION EFFICIENCY OF LIME AND MORINGA OLEIFERA ON CANE SUGAR JUICE. In: FW conference, 2018.

Oladimeji, Temitayo E, and Sonibare, Jacob and Omoleye, James and Emetere, Moses and Elehinafe, F. Boluwaji (2018) A REVIEW ON TREATMENT METHODS OF USED LUBRICATING OIL. International Journal of Civil Engineering and Technology, 9 (12). pp. 506-514. ISSN 0976-6308 and ISSN Online: 0976-6316

Oladimeji, Temitayo E, and Sonibare, Jacob and Omoleye, James (2018) INVESTIGATION OF CO AND SO2 FROM ACID CLAY TREATMENT OF USED LUBRICATING OIL. In: International Conference on Engineering for Sustainable World, organized, 9th July to 13th July 2018, Covenant University Ota, Nigeria.

Oladimeji, Temitayo E, and Sonibare, Jacob and Omoleye, James (2018) Investigation of Co and So2 from Acid Clay Treatment of used Lubricating Oil. In: IOP Conf. Series: Materials Science and Engineering.

Oladimeji, Temitayo E, and Sonibare, Jacob and Omoleye, James and Adegbola, Abiola A. and Okagbue, H. I. (2018) Data on the treatment of used lubricating oil from two different sources using solvent extraction and adsorption. Data in Brief. pp. 2240-2252. ISSN 2352-3409

Olanipekun, Ayorinde Tayo and Abioye, Abiodun A. and Oluwabunmi, Kayode Emmanuel (2018) Time-Dependent Ginzburg–Landau equation modelling of electron beam additive manufactured Titanium alloy. Leonardo Electronic Journal of Practices and Technologies, 32. pp. 93-102. ISSN 1583-1078

Olatunji, Obafemi and Akinlabi, Stephen A. and Ajayi, O. O. and Abioye, Abiodun A. and Ishola, Felix and Peter, Mashinini and Madushele, Nkosinathi (2018) Electric Power Crisis in Nigeria: A Strategic Call for Change of Focus to Renewable Sources. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Oluwunmi, Adedamola O and Akinjare, O. A. and Ajibola, M. O. and Oloke, C. Olayinka (2018) AN EVALUATION OF THE BASIC FACILITY NEEDS OF PRIVATE UNIVERSITY STUDENTS IN OGUN STATE, NIGERIA. International Journal of Civil Engineering and Technology (IJCIET), 9 (9). pp. 476-484. ISSN 0976-6316

Omeje, Maxwell and Adewoyin, O.O and Joel, E. S. and Okolie, T. A. Sociis and Ayowe, Omorotemu Efemena and Akinpelu, A. and Arijaje, Theophilus E. (2018) Potential Health Risks of Heavy Metal Contents in Bottled Water from Lagos State and Its Environs, Nigeria. In: 2nd International Conference on Science and Sustainable Development IOP Conf. Series: Earth and Environmental Science, 2018.

Omeje, Maxwell and Adewoyin, O.O and Joel, E. S. and Okolie, T. A. Sociis and Sam-Inyang, Samuel and Arijaje, Theophilus E. and Akinpelu, A. (2018) Dust pollution and its potential health risk exposure to inhabitants of Covenant University and canaanland, Ogun state, Nigeria. In: 2nd International Conference on Science and Sustainable Development IOP Conf. Series: Earth and Environmental Science, 2018.

Omodara, O. J. and Ayo, Daniel and Emetere, Moses and Ayoola, A. A. (2018) EMPIRICAL MODEL FOR OPTIMIZING SHEA BUTTER EXTRACTION IN AN UNBAFFLED VESSEL EQUIPPED WITH AN IMPELLER. CHEMISTRY & CHEMICAL TECHNOLOGY, 12. pp. 221-228.

Omotosho, Olugbenga Adeshola and Okeniyi, Joshua Olusegun and Ikotun, Jacob Olumuyiwa and Loto, C. A. and Popoola, A. P. I. (2018) Corrosion Behaviour of Mild Steel in 0.5 M Sulphuric Acid Media in the Presence of Potassium Chromate. Journal of Engineering and Applied Sciences, 13 (14). pp. 5789-5795. ISSN 1816-949X

Omuh, I. O. and Mosaku, T. O. and Joshua, Opeyemi and Ojelabi, Rapheal A. (2018) Data on mixing and curing methods effects on the compressive strength of concrete. Data in Brief, 18. 877 - 881.

Omuh, I. O. and Mosaku, T. O. and Joshua, Opeyemi and Ojelabi, Rapheal A. and Amusan, L. M. and Afolabi, A.O. and Arowolo, Adeoluwa O. (2018) Data on mixing and curing methods effects on the compressive strength of concrete. Data in Brief, 18. pp. 877-881.

Omuh, I. O. and Mosaku, T. O. and Tunji-Olayeni, P .F and Ojelabi, Rapheal A. and Afolabi, A.O. and Joshua, Opeyemi (2018) APPRAISAL OF RETROFITTING EXISTING STRUCTURES TO PROVIDE ACCESS TO CLEAN AND SUSTAINABLE ENERGY. International Journal of Civil Engineering and Technology (IJCIET), 9 (7). pp. 550-557. ISSN 0976-6316

Onawumi, A.S. and Fayomi, O. S. I and Okolie, T. A. Sociis and Adio, Timilehin and Udoye, Nduka Ekene and Samuel, A.U. (2018) Determination of a spark ignition engine's performance parameters using response surface methodology. In: Technologies and Materials for Renewable Energy, Environment and Sustainability., 19–21 September 2018, Athens, Greece.

Ongbali, Samson O. and Igboanugo, A. C. and Afolalu, Sunday A. and Udo, Mfon .O and Okokpujie, Imhade P. (2018) Model Selection Process in Time Series Analysis of Production System with Random Output. In: IOP Conf. Series: Materials Science and Engineering.

Orodu, O. D. and Orodu, Kale B. and Afolabi, Richard Oyekunle and Dafe, Eboh A. (2018) Dataset on experimental investigation of gum arabic coated alumina nanoparticles for enhanced recovery of nigerian medium crude oil. Data in Brief. pp. 475-480. ISSN 2352-3409

Orodu, O. D. and Orodu, Kale B. and Afolabi, Richard Oyekunle and Dafe, Eboh A. (2018) Rheology of Gum Arabic Polymer and Gum Arabic Coated Nanoparticle for Enhanced Recovery of Nigerian Medium Crude Oil under Varying Temperatures. Data in Brief.

Osawaru, FAITH and Amusan, L. M. and Awotinde, Oladipupo Sunday and Akanya, Cinwosoko Ninma and ASIYANBOLA, OLATOMIDE DAVID and Akinbo, Faith (2018) Planning materials supply for construction works. International Conference on Science and Sustainable Development.

Osueke, Christian O. and Idiegbeyan-Ose, Jerome and Eyiolorunshe, Toluwani and Aregbesola, Ayooluwa and Owolabi, Shola Emmanuel (2018) ANALYSIS OF MECHANICAL ENGINEERING RESEARCH ACTIVITIES A CASE STUDY USING BIBLIO METRIC METHOD:A CASE STUDY OF UNDERGRADUATE PROJECTS. International Journal of Mechanical Engineering and Technology, 9 (12). pp. 1014-1021.

Owodolu, A.A. and Bolu, Christian and Abioye, Abiodun A. and Boyo, H.O. and Onyiagha, G. (2018) A Systematic Human Counting at Guest House using Sensing Device Technique. International Journal of Scientific and Research Publications, 8 (3). pp. 377-379. ISSN 2250-3153

Owodolu, A.A. and Bolu, Christian and Abioye, Abiodun A. and Efemwenkiekie, K. U. (2018) Development of a System for Counting of People Using MultiCamera and Sensors. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Owodolu, A.A. and Bolu, Christian and Ayuba, Samuel U. and Babaremu, Kunle (2018) Development of a Counting System Method for Managing Crowd Using Image Sensing Device. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Oyebanji, J.A. and Oyedepo, Sunday Olayinka and Okekunle, P. O. and lasode, O.A. and Adekeye, T. (2018) Product yield distribution and Essential Oil Composition of Eucalyptus Terminalis Sawdust Pyrolysis. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering, 2018.

Oyedepo, Sunday Olayinka and Babalola, P.O. and Nwanya , Stephen and Kilanko, O. O and Leramo, R.O. and Aworinde, Abraham K. and Adekeye, T. and Oyebanji, J.A. and Abidakun, O.A. and Agberegha, Orobome Larry (2018) Towards a Sustainable Electricity Supply in Nigeria: The Role of Decentralized Renewable Energy System. European Journal of Sustainable Development Research, 2 (4). ISSN 2542-4742

Oyekunle, J. A. O. and Dirisu, J. O. and Okokpujie, Imhade P. and Asere, A.A. (2018) DETERMINATION OF HEAT TRANSFER PROPERTIES OF VARIOUS PVC AND NON-PVC CEILING MATERIALS AVAILABLE IN NIGERIAN MARKETS. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 963-973. ISSN 0976-6359

Oyeyemi , Kehinde D. and Sanuade, O. A. and Oladunjoye , M.A and Aizebeokhai, A. P. and Olaojo, A. A. and Fatoba, OS and Olofinnade, O. M. and Ayara, Williams A. and Oladapo, O (2018) Data on the thermal properties of soil and its moisture content. Data in Brief, 17. pp. 900-906.

Oyeyipo, Opeyemi and Odeyinka, Henry A. and Owolabi, J. D and Afolabi, A.O. and Ojelabi, Rapheal A. (2018) Survey dataset on the impact of stakeholder's relationship on the academic performance of engineering students. Data in Brief, 17. pp. 1355-1360.

P

POPOOLA, SEGUN ISAIAH and Covenant University, Theses (2018) MACHINE LEARNING-BASED PATH LOSS MODELS FOR HETEROGENEOUS RADIO NETWORK PLANNING IN A SMART CAMPUS. Masters thesis, COVENANT UNIVERSITY.

Popoola, S.I and Atayero, A. A. and Badejo, J. A. and John, T. M and Odukoya, J. A. and Omole, D. O. (2018) Learning Analytics for Smart Campus: Data on Academic Performances of Engineering Undergraduates in a Nigerian Private University. Data in Brief, 17. pp. 79-94. ISSN 2352-3409

Popoola, S.I. and Popoola, O.A. and Oluwaranti, A.I. and Atayero, A. A. and Badejo, J. A. and Misra, S. (2018) A cloud-based intelligent toll collection system for smart cities. In: Smart and Innovative Trends in Next Generation Computing Technologies. Springer Verlag, pp. 653-663.

R

Raji, Ameenat Abiodun and Alaba, Peter Adeniyi and Yusuf, Hindatu and Bakar, Noor Hidayati Abu and Taufek, Norhidayah Mohd and Muin, Hasniyati and Alias, Zazali and Milow, Pozi and Razak, Shaharudin Abdul (2018) Fishmeal replacement with Spirulina Platensis and Chlorella vulgaris in African catfish (Clarias gariepinus) diet: Effect on antioxidant enzyme activities and haematological parameters. Research in Veterinary Science, 119. pp. 67-75.

Rivas-Cáceres, Raymundo Rene and Stephano-Hornedo, Jose Luis and Lugo, Jorge and Vaca, Rocio and Aguila, Pedro Del and Yañez-Ocampo, Gustavo and Mora-Herrera, Martha Elena and Díaz, Luis Miguel Camacho and Cipriano-Salazar, Moisés and Alaba, Peter Adeniyi (2018) Bactericidal effect of silver nanoparticles against propagation of Clavibacter michiganensis infection in Lycopersicon esculentum Mill. Microbial Pathogenesis, 115. pp. 258-262.

Roland, T. and Leramo, R.O. and Oyebade, Babatunde (2018) Synergistic Combination Effect of Salvia officinalis and Lavandula officinalis on the Corrosion Inhibition of Low-Carbon Steel in the Presence of SO42−- and Cl−-Containing Aqueous Environment. Journal of Failure Analysis and Prevention, 18. pp. 1429-1438.

S

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Afolalu, Sunday A. and Ongbali, Samson O. (2018) PARETO ANALYSIS OF PRODUCT QUALITY FAILURES AND COST EFFECTS IN BOTTLING MACHINES-A LEAN THINKING SOLUTION FOR ALCOHOL INDUSTRY. International Journal of Mechanical Engineering and Technology, 9 (11). pp. 2380-2388. ISSN 0976-6340 and ISSN Online: 0976-6359

Salawu, Enesi Y. and Okokpujie, Imhade P. and Afolalu, Sunday A. and Ajayi, O. O. and Azeta, Joseph (2018) INVESTIGATION OF PRODUCTION OUTPUT FOR IMPROVEMENT. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 915-922. ISSN 2249-6890

Salawu, Enesi Y. and Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Agarana, M. C. (2018) Numerical Modeling and Evaluation of Involute Curve Length of a Spur Gear Tooth to Maintain Constant Velocity Ratio While in Motion. In: Proceedings of the International MultiConference of Engineers and Computer Scientists, March 14-16, 2018, Hong Kong.

Salawu, Enesi Y. and Okokpujie, Imhade P. and Ajayi, O. O. and Agarana, M. C. (2018) Analytical Technique for the Determination of Hoop Stress and Radial Stress on the Tooth Spur Gear under Vertical Loading in a Food Packaging Machine. In: International MultiConference of Engineers and Computer Scientists 2018 Vol II, March 14-16, 2018, Hong Kong.

Sam‑Marcus, Jethro and Enaworu, E. and Rotimi, Oluwatosin J. and Seteyeobot, Ifeanyi (2018) A proposed solution to the determination of water saturation: using a modelled equation. Journal of Petroleum Exploration and Production Technology. pp. 1-7.

Sanni, O. and Popoola, A. P. I. and Fayomi, O. S. I (2018) Enhanced corrosion resistance of stainless steel type 316 in sulphuricacid solution using eco-friendly waste product. Results in Physics (9). pp. 225-230.

Sanni, O. and Popoola, A. P. I. and Fayomi, O. S. I (2018) The inhibitive study of egg shell powder on uns n08904 austenitic stainless steel corrosion in chloride solution. Defence Technology, 14. pp. 463-468.

Sanni, Samuel Eshorame (2018) Polyhydroxyalkanoates (PHAs) as Scaffolds for Tissue Engineering. In: Polyhydroxyalkanoates: Biosynthesis, Chemical Structures and Applications. Materials Science and Technologies, pp. 209-238. ISBN 978-1-53613-439-1

Sanni, Samuel Eshorame and Adefila, S. S, and Anozie, Ambrose Nwora (2018) Prediction of sand kinematic pressure and fluid-particle interaction coefficient as means of preventing sand-induced corrosion in crude oil pipelines. Ain Shams Engineering Journal.

Sanni, Samuel Eshorame and Akinrinola, Olasubomi and Yusuf, Esther Ojima and Fagbiele, Omololu Oluwatobi and Agboola, Oluranti (2018) Chemical Kinetics of Alkaline Pretreatment of Napier Grass (Pennisetum purpureum) Prior Enzymatic Hydrolysis. The Open Chemical Engineering Journal, 12. pp. 36-56.

Shomefun, Tobi and Ademola, A. and Awosope, C. O. A. and Adekitan, Aderibigbe I. (2018) Critical Review of Different Methods for Siting and Sizing Distributed-generators. TELKOMNIKA, 16 (5). pp. 2395-2405. ISSN 1693-6930

T

Tunji-Olayeni, P .F and Afolabi, A.O. and Adewale , B. A. and Fagbenle, Olabosipo I. (2018) Survey data set on work-life conflict of women in the construction industry. Data in Brief, 19. pp. 921-924.

Tunji-Olayeni, P .F and Afolabi, A.O. and Okpalamoka, Obiora I. (2018) Survey dataset on occupational hazards on construction sites. Data in Brief, 18. pp. 1365-1371.

Tunji-Olayeni, P .F and Afolabi, A.O. and Omuh, I. O. and Ojelabi, Rapheal A. and Alaka, Rotimi (2018) HUMAN AND PHYSICAL CAPITAL OF CRAFTSMEN IN THE CONSTRUCTION INDUSTRY. International Journal of Civil Engineering and Technology, 9 (6). pp. 1274-1279. ISSN 0976-6316

Tunji-Olayeni, P .F and Mosaku, T. O. and Oyeyipo, Opeyemi and Afolabi, A.O. (2018) Sustainability strategies in the construction industry: implications on Green Growth in Nigeria. In: IOP Conf. Series: Earth and Environmental Science.

Tunji-Olayeni, P .F and Ojelabi, Rapheal A. and Omuh, I. O. and Afolabi, A.O. (2018) FACTORS AFFECTING PERSISTENCE OF FRESHMEN: A CASE OF BUILDING TECHNOLOGY PROGRAMME. International Journal of Civil Engineering and Technology (IJCIET), 9 (6). 1267-1273. ISSN 0976-6316

Tunji-Olayeni, P .F and Omuh, I. O. and Ojelabi, Rapheal A. and Afolabi, A.O. (2018) SOCIAL AND FINANCIAL CAPITAL OF CRAFTSMEN IN THE CONSTRUCTION INDUSTRY. International Journal of Civil Engineering and Technology (IJCIET), 9 (6). pp. 1107-11113. ISSN 0976-6316

Tunji-Olayeni, P .F and Owolabi, J. D and Amusan, L. M. and Nduka, David (2018) JOB SATISFACTION OF FEMALE CONSTRUCTION PROFESSIONALS IN MALE DOMINATED FIELDS. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 732-738. ISSN 0976-6359

U

UGAH, UZODINMA KELECHI and Covenant University, Theses (2018) PROPOSED FACULTY OF ENVIRONMENTAL SCIENCE FOR NNAMDI AZIKIWE UNIVERSITY, AWKA, ANAMBRA STATE, NIGERIA TOWARDS ACHIEVING UNIVERSAL DESIGN IN ACADEMIC BUILDINGS. Masters thesis, COVENANT UNIVERSITY.

UZOR, CHUKWUNEDUM and Covenant University, Theses (2018) MODELS TO PREDICT AND OPTIMIZE MACHINE GUARD OPERATOR’S COMPLIANCE ACTIVITIES IN A BOTTLING PROCESS PLANT. Masters thesis, COVENANT UNIVERSITY.

Udo, Mfon .O and Esezobor, D. E. and Afolalu, Sunday A. and Onovo, Harrison and Ongbali, Samson O. and Okokpujie, Imhade P. (2018) Investigation of Balling Characteristics of Mixture of Iron Oxide Bearing Wastes and Iron Ore Concentrates. In: IOP Conf. Series: Materials Science and Engineering.

Udo, Mfon .O and Esezobor, D. E. and Apeh, F. I. and Afolalu, Sunday A. (2018) Factors Affecting Ballability of Mixture Iron Ore Concentrates and Iron Oxide Bearing Wastes in Metallurgical Processing. Journal of Ecological Engineering, 19 (3). pp. 235-242.

Uzairue, Stanley Idiake and Ighalo, Joshua and Matthews, V. O. and Nwukor, Frances and Popoola, A. P. I. (2018) IoT-Enabled Alcohol Detection System for Road Transportation Safety in Smart City. Springer Nature. pp. 695-704.

Uzairue, Stanley Idiake and Matthews, V. O. and Ochonogor, Charles and Amaize, Peter and Anyasi, F. I. (2018) Experimental Analysis of Cable Distance Effect on Signal Attenuation in Single and Multimode Fiber Optics. International Journal of Electrical and Computer Engineering (IJECE), 8 (3). pp. 1577-1582. ISSN 2088-8708

Uzairue, Stanley Idiake and Nkordeh, Nsikan and Ochonogor, Charles and Amaize, Peter and Alashiri, Olaitan and Ighalo, Joshua (2018) A Review: The Past, Present and Future of Radio Frequency Spectrum in Nigeria, Canada, United Kingdom, Ghana. International Research Journal of Engineering and Technology (IRJET), 6 (3). pp. 1034-1039. ISSN 2395-0056

W

Wang, Fawu and Dai, Zili and Okeke, Austin Chukwueloka Udechukwu and Mitani, Yasuhiro and Yang, Hufeng (2018) Experimental study to identify premonitory factors of landslide dam failures. Engineering Geology. pp. 123-134.

Wang, Fawu and Okeke, Austin Chukwueloka-Udechukwu and Kogure, Tetsuya and Sakai, Tetsuya and Hayashi, Hisao (2018) Assessing the internal structure of landslide dams subject to possible piping erosion by means of microtremor chain array and self-potential surveys. Engineering Geology. pp. 11-26.

Y

Yussuf, N. M. and Embong, Z. and Abdullah, S. and Masirin, M. I. M. and Tajudin, S. A. A. and Ahmad, S. and Sahari, S K and Anuar, A. A. and Omeje, Maxwell (2018) The enhancement of heavy metal removal from polluted river water treatment by integrated carbon-aluminium electrodes using electrochemical method. In: IOP Conf. Series: Materials Science and Engineering 298, 2018.

This list was generated on Tue Dec 3 14:53:48 2024 WAT.