Items where Subject is "T Technology > T Technology (General)"

Library of Congress Subject Areas (1959)
- T Technology (1959)
  - T Technology (General) (1959)

Group by: Creators | Item Type

Number of items at this level: 1959.

Article

Ejemeyovwi, J. O. and Osabuohien, E. S. C. (2018) Investigating the relevance of mobile technology adoption on inclusive growth in West Africa. Journal of the Academy of Social Sciences. ISSN 2158-2041

Okesola, Julius Olatunji and Okokpujie, Kennedy O. and Odepidan, David Omorinola and Ogunbanwo, Afolakemi Simbo and Falade , Adesola Muri and Ayoade , Akeem Owoade Reviewing the Role of Stakeholders in Requirement Engineering: A Stakeholder’s Theory Perspective. Asian Journal of Scientific Research. ISSN 1992-1454 (In Press)

ADEBISI, Oluwasola S. and Durodola, O. D. and Ayedun, C. A. and OMOSIVWE, Whitney (2021) IMPACT OF PIPELINE VANDALISM AND EXPLOSION ON RESIDENTIAL PROPERTY VALUES IN ABULE-EGBA, LAGOS STATE. International Research Journal of Environmental and Social Sciences, 1 (1).

AKANDE, I.G and Oluwole, O. O. and Fayomi, O. S. I (2018) Optimizing the defensive characteristics of mild steel via the electrodeposition of ZneSi3N4 reinforcing particles. Defence Technology.

AKANDE, I.G and Oluwole, O. O. and Fayomi, O. S. I (2019) Optimizing the defensive characteristics of mild steel via the electrodeposition of Znsingle bondSi3N4 reinforcing particles. Defense Technology, 15. pp. 526-532.

Abam, Fidelis I. and Ohunakin, O.S. (2015) Economics of wind energy utilisation for water pumping and CO2 mitigation potential in Niger Delta, Nigeria. International Journal of Ambient Energy. pp. 1-11. ISSN 0143-0750

Abam, Fidelis I. and Ohunakin, O.S. and Nwankwojike, Bethrand N. and Ekwe, Ekwe B. (2014) End-use energy utilization efficiency of Nigerian residential sector. Frontiers in Energy, 8 (3). pp. 322-334. ISSN 20951701

Abam, Fidelis I. and Okon, Bassey B. and Ekewe, Ekewe B. and Isaac, John and Effiom, Samuel O. and Ndukwu, Macmanus C and Inah, Oliver I and Ubi, Paschal A and Oyedepo, Sunday Olayinka and Ohunakin, O.S. (2022) Thermoeconomic and exergoenvironmental sustainability of a power-cooling organic Rankine cycle with ejector system. e-Prime - Advances in Electrical Engineering, Electronics and Energy.

Abam, Fidelis I. and Okon, Bassey B. and Ekwe, Ekwe B. and Isaac, John and Effiom, Samuel O. and Ndukwu, Macmanus C and Inah, Oliver I and Ubi, Paschal A and Oyedepo, Sunday Olayinka and Ohunakin, O.S. (2022) Thermoeconomic and exergo environmental sustainability of a power-cooling organic Rankine cycle with ejector system. e-Prime - Advances in Electrical Engineering, Electronics and Energy.

Abate, A and Kifle, M and Okuboyejo, S and Mbarika, V (2018) A Mobile- Based Telepathology System for a Low Resource Setting in Ethiopia. Applied Computing and Informatics.

Abayomi, Abdultaofeek and Olugbara, O. O. and Adetiba, E. and Heukelman, Delene (2015) Training Pattern Classifiers with Physiological Cepstral Features to Recognise Human Emotion. Springer, 419. pp. 271-280.

Abdulkareem, Ademola and AKINBULIRE, T. 0 and Agbetuyi, Ayoade F. (2014) Improving The Thermoplastic Extrusion Process In Cable Manufacturing. International Journal of Retearch in Applied, Natural and Social Sciences, 2 (4). pp. 193-202. ISSN (E): 2321-8851;P): 2347-4580

Abdulkareem, Ademola and Afolabi, A. S. and Ahanonu, S. O. and Mokrani, Touhami (2014) Effect of Treatment Methods on Used Lubricating Oil for Recycling Purposes. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 36 (9). pp. 966-973. ISSN 1556-7230

Abdulkareem, Ademola and Alayande, A. S. and Somefun, Tobilola Emmanuel and Ette, E.V. (2021) Investigating the effects of bus numbering in a radial transmission network using load-flow study. Heliyon.

Abdulkareem, Ademola and Awosope, C. O. A. and Adoghe, A. U. and Alayande, A. S. (2016) Investigating the Effect of Asymmetrical Faults at Some Selected Buses on the Performance of the Nigerian 330-kV Transmission System. International Journal of Applied Engineering Research, 11 (7). pp. 5110-5122. ISSN 0973-4562

Abdulkareem, Ademola and Awosope, C. O. A. and Awelewa, A. A. (2016) On The Cost Implications of Technical Energy Losses on Nigerian 330-kV Transmission Grid System. International Journal of Science and Research, 5 (1). pp. 1289-1299. ISSN 2319-7064

Abdulkareem, Ademola and Awosope, C. O. A. and Awelewa, A. A. (2016) The Use of Three-Phase Fault Analysis for Rating Circuit Breakers on Nigeria 330 kV Transmission Lines. Journal of Engineering and Applied Sciences, 11 (12). pp. 2612-2622. ISSN 1816-949X

Abdulkareem, Ademola and Awosope, C. O. A. and Samuel, I. A. and Agbetuyi, Ayoade F. (2016) Contingency Analysis for Assessing Line Losses in Nigeria 330-kV Power lines. International Journal of Engineering and Advanced Technology, 5 (3). pp. 66-78. ISSN 2249-8958

Abdulkareem, Ademola and Ogbe, D. and Somefun, Tobilola Emmanuel and Agbetuyi, Ayoade F. (2021) Optimal PMU Placement Using Genetic Algorithm for 330kV 52-Bus Nigerian Network. Advances in Science, Technology and Engineering Systems Journal, 6 (1). pp. 597-604.

Abdulkareem, Ademola and Somefun, Tobilola Emmanuel and Chinedum, Oji K. and Agbetuyi, Ayoade F. (2021) Design and implementation of speech recognition system integrated with internet of things. International Journal of Electrical and Computer Engineering (IJECE), 11 (2). pp. 1796-1803. ISSN 2088-8708

Abdulkareem, Ademola and Somefun, Tobilola Emmanuel and Oguntosin, V. and Oahimire, Princess (2022) Application of a wireless apnea monitoring device for crisis alertness and sleep diagnosis. TELKOMNIKA Telecommunication Computing Electronics and Control, 20 (4). pp. 875-882. ISSN 1693-6930

Abdulwahab, M and Fayomi, O. S. I and Awe, F.E. (2016) Anti-Corrosion and Passivation Potential of AA6063-Type Al-Mg-Si Alloy with Avogadro Natural Oil in HCl Solution. Journal of Advanced Electrochemistry, 2 (2). pp. 75-77.

Abdulwahab, M and Fayomi, O. S. I and Popoola, A. P. I. (2016) Structural evolution, thermomechanical recrystallization and electrochemical corrosion properties of Ni-Cu-Mg amorphous coating on mild steel fabricated by dual-anode electrolytic processing. Applied Surface Science, 375. pp. 162-168.

Abdulwahab, M and Fayomi, O. S. I and Popoola, A. P. I. (2016) Structural evolution, thermomechanical recrystallization andelectrochemical corrosion properties of Ni-Cu-Mg amorphous coatingon mild steel fabricated by dual-anode electrolytic processing. Applied Surface Science. pp. 162-168.

Abdulwahab, M and Fayomi, O. S. I and Popoola, A. P. I. and Asuke, F. and Umoru, L. E. (2014) Effect of Avogadro natural oil on the corrosion inhibition of mild steel in hydrochloric acid solution. Research on Chemical Intermediates, 40 (3). pp. 1115-1123.

Abdulwahab, M and Fayomi, O. S. I and Popoola, A. P. I. and Dodo, M.R. (2017) In-situ hybrid study of thermal behaviour of ZnANi and ZnANiAAl2O3 nanocrystallite thin films induced TEA/MEA by electrocodeposition. Results in Physics, 7. pp. 213-215.

Abdulwahab, M and Kasim, A. and Fayomi, O. S. I and Asuke, F. and Popoola, A. P. I. (2012) Inhibitive effect of Arachis hypogeae on the corrosion of mild steel in sulphuric acid solution. J. Mater. Environ. Sci., 3 (6). pp. 1177-1182. ISSN 2028-2508

Abdulwahab, M and Kasim, A. and Yaro, S. A. and Fayomi, O. S. I and Umaru, O. B. (2013) Effect of Avogadro Oil as Corrosion Inhibitor of Thermally Pre-aged Al-Si-Mg Alloy in Sodium Chloride Solution. Silicon, 5. pp. 225-228.

Abdulwahab, M and Madugu, I. A. and Asuke, F. and Fayomi, O. S. I and Ayeni, Folusho (2013) Effect of thermal ageing treatment on the mechanical properties of antimony-modified A356.0-type Al-Si-Mg alloy. J. Mater. Environ Sci., 4 (1). pp. 86-92. ISSN 2028-2508

Abdulwahab, M and Popoola, A. P. I. and Fayomi, O. S. I (2012) Inhibitive Effect by Ricinus communis on the HCl/H3PO4 Acid Corrosion of Aluminium Alloy. International Journal of ELECTROCHEMICAL SCIENCE, 7. 11706 - 11717.

Abere, Dare Victor and Oyatogun, Grace Modupe and Abioye, Abiodun A. and Rominiyi, Azeez Lawan and Abioye, Oluwabunmi P. and Yaskuma, U. and Onotu, G. O. and Ogar, M. O. and Oyatogun, Oyeniran Amos and Igbonwelundu, Magnus T. and Filusi, G. F. and Akinwole, Ifeoluwa Emmanuel (2017) Comparative Study of Local Mining Methods and Assay of Cassiterite with other Alluvial Mineral Deposits in Kuru-Jantar, Plateau State, Nigeria. American Journal of Mining and Metallurgy, 4 (1). pp. 51-61.

Abere, Dare Victor and Oyatogun, Grace Modupe and Akinwole, Ifeoluwa Emmanuel and Abioye, Abiodun A. and Rominiyi, Azeez Lawan and Igonwelundu, Magnus T. (2017) Effects of Increasing Chitosan Nanofibre Volume Fraction on the Mechanical Property of Hydroxyapatite. American Journal of Materials Science and Engineering, 5 (1). pp. 6-16.

Abere, Dare Victor and Oyatogun, Grace Modupe and Rominiyi, Azeez Lawan and Abioye, Abiodun A. and Akinwole, Ifeoluwa Emmanuel and Igbonwelundu, Magnus T. and Oyatogun, Oyeniran Amos and Dagwai, Clive Na’andur and Abioye, Oluwabunmi P. (2017) Investigation of Physicochemical and Mechanical Property of UTAN Granites for Building Applications. American Journal of Mining and Metallurgy, 4 (1). pp. 37-44.

Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ajayi, O. O. and Afolalu, Sunday A. and Fajobi, M. A. (2018) MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF DUCTILE IRON PRODUCED FROM FUEL - FIRED ROTARY FURNACE. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 694-704. ISSN 0976-6359

Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ajayi, O. O. and Afolalu, Sunday A. and Fajobi, M. A. and Atanda, P. O. (2018) MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF DUCTILE IRON PRODUCED FROM FUEL - FIRED ROTARY FURNACE. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 694-704. ISSN 0976-6359

Abioye, Abiodun A. and Atanda, P. O. and Abioye, Oluwabunmi P. and Afolalu, Sunday A. and Dirisu, J. O. (2017) Microstructural Characterization and Some Mechanical Behaviour of Low Manganese Austempered Ferritic Ductile Iron. International Journal of Applied Engineering Research, 12 (23). pp. 14435-14441. ISSN 0973-4562

Abioye, Abiodun A. and Atanda, P. O. and Abioye, Oluwabunmi P. and Afolalu, Sunday A. and Dirisu, Joy Favour (2017) Microstructural Characterization and Some Mechanical Behaviour of Low Manganese Austempered Ferritic Ductile Iron. International Journal of Applied Engineering Research, 12 (23). pp. 14435-14441. ISSN 0973-4562

Abioye, Abiodun A. and Atanda, P. O. and Kolawole, O. F. and Olorunniwo, O. E. and Adetunji, Adelana Razak and Abioye, Oluwabunmi P. and Akinluwade, K. J. (2015) The Thermal Analysis of Fuel Fired Crucible Furnace Using Autodesk Inventor Simulation Software. Advances in Research, 5 (3). pp. 1-7. ISSN 2348-0394

Abioye, Abiodun A. and Atanda, P. O. and Majolagbe, S. B. and Isadare, Dayo Adeyemi and Abioye, Oluwabunmi P. and Akinluwade, K. J. and Adetunji, Adelana Razak (2015) Material Selection for Gas Turbine Blade Coating Using GRANTA Material Selector. Advances in Research, 5 (1). pp. 1-9. ISSN 2348-0394

Abioye, Oluwabunmi P. and Abioye, Abiodun A. and Atanda, P. O. and Osinkolu , G. A and Folayan , A. J, (2017) NUMERICAL SIMULATION OF OUTER DIE ANGLE OF EQUAL CHANNEL ANGULAR EXTRUSION PROCESS. International Journal of Mechanical Engineering and Technology (IJMET), 8 (12). pp. 264-273. ISSN 0976-6359

Abioye, Oluwabunmi P. and Loto, C. A. and Fayomi, O. S. I (2019) Evaluation of Anti-biofouling Progresses in Marine Application. Journal of Bio- and Tribo-Corrosion, 5 (22).

Abnisa, Faisal and Sanni, Samuel Eshorame and Alaba, Peter Adeniyi (2021) Comparative study of catalytic performance and degradation kinetics of biodiesels produced using heterogeneous catalysts from kaolinite. Journal of Environmental Chemical Engineering, 9 (4).

Abraham, V. D. and Orodu, O. D. and Efeovbokhan, Vincent Enon and Olabode, Oluwasanmi and Ojo, Temiloluwa I. (2020) The Influence of Surfactant Concentration and Surfactant Type on the Interfacial Tension of Heavy Crude Oil/Brine/Surfactant System. Petroleum and Coal, 62 (2). pp. 292-298. ISSN 1337-7027

Adaramola, Muyiwa S and Oyewola, Olanrewaju M. and Ohunakin, O.S. and Akinnawonu, Olaolu O. (2014) Performance evaluation of wind turbines for energy generation in Niger Delta, Nigeria. Sustainable Energy Technologies and Assessments, 6. pp. 75-85.

Adeaga, O. A. and Dare, Ademola Adebukola and Odunfa, K. M. and Ohunakin, O.S. (2015) Modeling of Solar Drying Economics Using Life Cycle Savings (L.C.S) Method. Journal of Power and Energy Engineering, 3. pp. 55-70.

Adebayo, J. K. and Oyedepo, Sunday Olayinka and Petinrin, M. O. and Dare, A. A. and Nwaokocha, C. N. and Layeni, A. T. and Fayomi, O. S. I and Dirisu, J. O. and Kilanko, O. O (2022) Numerical simulation of microchannel double-pipe heat exchanger with ribs. AIP Conference, 2437 (1).

Adebisi, Azeez and Abd-Rasheed, Ajiboye and Tomomewo, Olusegun Stanley and Sanni, Samuel Eshorame and Oguntade, Tomiwa and Oni, Babalola Aisosa (2023) Experimental investigation on the influence of H2 on diesel engine fueled with Afzelia Africana biofuel – Titanium oxide nanoparticle blends. Sustainable Energy Technologies and Assessments, 60.

Adebiyi, A. A. and Okuboyejo, Sena and Akinbode, Mosunmola and Agboola, Mayowa G. and Oni, Aderonke A (2015) Exploring Social Networking and University's Students Academic Performance. Asian Journal of Information Technology, 14 (7). pp. 253-259. ISSN 1682-3915

Adeboye, A. B. (2015) Characteristics Of Modern Ecclesiastical Architecture In Nigeria: A Case Study Of Some Selected Church Buildings. International Journal of Research in Engineering & Technology, 3 (1). pp. 1-10. ISSN (E): 2321-8843; ISSN(P): 2347-4599

Adeboye, A. B. (2015) Christian Theology, Liturgy And Ecclesiastical Architecture In Nigeria. International Journal of Management, Information Technology and Engineering (BEST: IJMITE), 3 (3). pp. 1-8. ISSN 2348-0513

Adeboye, A. B. (2015) Effects Of Industrial Revolution On Ecclesiastical Architecture In Nigeria: A Case Study Of Faith Tabernacle At Ota. International Journal of Management, Information Technology and Engineering (BEST: IJMITE), 3 (2). pp. 27-34. ISSN 2348-0513

Adeboye, A. B. (2015) Existing Materials, Current Style and Ecclesiastical Architecture in Nigeria. INTERNATIONAL JOURNAL OF INNOVATIVE RESEARCH & DEVELOPMENT, 4 (3). pp. 216-220. ISSN 2278 – 0211

Adeboye, A. B. (2015) Exploration of the Predominant Determinants of Ecclesiastical Architecture in Nigeria. International Journal of Education and Research, 3 (2). pp. 509-518. ISSN 2201-6333 (Print): 2201-6740 (Online)

Adeboye, A. B. (2015) Heresy, Apostasy And Ecclesiastical Architecture In Nigeria. International Journal of Research in Engineering & Technology, 3 (3). pp. 11-16. ISSN 2321-8843 (P): 2347-4599

Adeeyo, O.A. and Adefila, S. S, and Ayeni, .A. O. (2023) Dynamics of steady-state gravity-driven inviscid flow in an open system. International Journal of Innovative Research and Scientific Studies, 6 (1).

Adegoke, O.J. and Olaleye, A. and Oloyede, S. A. (2013) A Study of Valuation Clients Perception on Mortgage Valuation Reliability. African Journal of Environmental Science and Technology, 7 (7). pp. 585-590. ISSN 1996-0786

Adejumobi, I. A. and Wara, S.T. and Adebisi, O.I. and Akinwande, O.A. (2016) ECONOMICS OF USING ENERGY SAVING LOADS FOR ELECTRICAL SERVICES. UMUDIKE JOURNAL OF ENGINEERING AND TECHNOLOGY (UJET),, 2 (1). 144 -152.

Adekeye, T. and Adegun, I. K. and Okekunle, P. O. and Hussein, A. K. and Oyedepo, Sunday Olayinka and Adetiba, E. and Fayomi, O. S. I (2016) Numerical Analysis of the Effects of Selected Geometrical Parameters and Fluid Properties on MHD Natural Convection Flow in an Inclined Elliptic Porous Enclosure with Localized Heating. Heat Transfer—Asian Research.

Adekitan, Aderibigbe I. (2018) DATA BASED ANALYTICAL IDENTIFICATION OF VEHICLE MAINTENANCE COST COMPONENTS AND USAGE DATA TRENDS. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 691-701. ISSN 0976-6359

Adekitan, Aderibigbe I. (2018) RISK ASSESSMENT AND SAFETY ANALYSIS FOR A JET FUEL TANK CORROSION RECERTIFICATION OPERATION. International Journal of Mechanical Engineering and Technology (IJMET), 9 (7). pp. 387-396. ISSN 0976-6359

Adekitan, Aderibigbe I. (2018) SUPPLY INSTABILITY INDUCED TORQUE VARIATIONS OF A THREE PHASE ASYNCHRONOUS MOTOR. Adekitan, 9 (6). pp. 572-583.

Adekitan, Aderibigbe I. and Abolade, Jeremiah O. and Shobayo, Olamilekan (2019) Data mining approach for predicting the daily Internet data traffic of a smart university. Journal of Big Data. pp. 1-23.

Adekitan, Aderibigbe I. and Adetokun, Bukola and Shomefun, Tobi and Aligbe, Alex (2018) Cost implication of Line Voltage variation on Three Phase Induction Motor operation. TELKOMNIKA, 16 (4). pp. 1404-1412. ISSN 1693-6930

Adekitan, Aderibigbe I. and Matthews, V. O. and John, Temitope M. and Uzairue, Stanley Idiake (2018) Implementation of E-voting System for Student Union Government Elections. TELKOMNIKA, 16 (5). pp. 2155-2164. ISSN 1693-6930

Adekitan, Aderibigbe I. and Omoruyi, Osemwegie (2018) Stock keeping accuracy: A data based investigation of storage tank calibration challenges. Data in Brief, 19. pp. 2155-2162.

Adekitan, Aderibigbe I. and Orimogunje, Abidemi (2018) A Subtle Serial Key based Software Protection Scheme. Journal of Engineering Science and Technology Review, 11 (4). pp. 48-51.

Adelakun, A. O. and Njah, A. N. and Olusola, O. I. and Wara, S.T. (2016) Computer and Hardware Modeling of Periodically Forced. Active and Passive Electronic Components, 2016. p. 7.

Adelekan, D.S and Ohunakin, O.S. and Babarinde, T.O. and Odunfa, K. M. and Leramo, R.O. and Oyedepo, Sunday Olayinka (2017) Experimental performance of LPG refrigerant charges with varied concentration of TiO2 nano-lubricants in a domestic refrigerator. Case Studies in Thermal Engineering, 9. pp. 55-61.

Adelekan, D.S and Ohunakin, O.S. and Paul, B.S. (2022) Artificial intelligence models for refrigeration, air conditioning and heat pump systems. Energy Reports, 8. pp. 8451-8466.

Ademola, A. and Somefun, Tobilola Emmanuel and Agbetuyi, Ayoade F. and Olufayo, A. (2019) Web based fingerprint roll call attendance management system. International Journal of Electrical and Computer Engineering (IJECE), 9 (5). pp. 4364-4371. ISSN 2088-8708

Adenaike, Folahan Anthony and Ibem, Eziyi O. and Balogun, Rukayat Abidemi and Oladunjoye, Kola Gbolagade Kamoru (2018) Urban Sustainability Concepts and Their Implications on Urban Form. Urban and Regional Planning, 3 (1). pp. 27-33. ISSN 2575-1697

Aderibigbe, Adekitan (2017) Root Cause Analysis of a Jet Fuel Tanker Accident. International Journal of Applied Engineering Research, 12 (24). pp. 14974-14983. ISSN 0973-4562

Aderibigbe, M.A and Wara, S.T. and Airoboman, A.E (2017) Retrofitting Diesel Engine Generators for a sustainable Environment. Journal of Engineering and Applied Sciences, 12 (12). pp. 3242-3246. ISSN 1816-949X

Adesanmi, Adewole J. and Okedere, O. B. and Sonibare, Jacob and Elehinafe, F. Boluwaji and Fakinle, B. S. (2021) Atmospheric particulate fractions from Nigerian crude oil spillage. Environmental Challenges, 5.

Adesina, F. C. and Gbadegesin, Adeyemi and Olalekan, O . A. (2016) Formulation and Environmental Impact Evaluation of Walnut and Soya Bean Oil Based Drilling Fluid. British Journal of Applied Science & Technology, 17 (3). pp. 1-9. ISSN 2231-0843

Adetiba, E. and Abolarinwa, A. and Adegoke, Anthony A. and Taiwo, Tunmike B. and Ajayi, Oluwaseun T. and Abayomi, Abdultaofeek and Adetiba, Joy N. and Badejo, J. A. (2022) DeepCOVID-19: A model for identification of COVID-19 virus sequences with genomic signal processing and deep learning. Cogent Engineering, 9. ISSN 4: 1376488

Adetiba, E. and Olugbara, O. O. (2016) Classification of Eukaryotic Organisms Through Cepstral Analysis of Mitochondrial DNA. Springer, 243-25. pp. 243-252.

Adetiba, E. and Olugbara, O. O. (2015) Lung Cancer Prediction Using Neural Network Ensemble with Histogram of Oriented Gradient Genomic Features. The Scientific World Journal.

Adetola, Sunday Olufemi and Onawumi, A.S. and Lucas, Emanuel Babajide (2012) INVESTIGATION INTO MECHANIZED DE-FEATHERING PROCESS AND OPTIMAL SCALDING TEMPERATURE OF EXOTIC AND LOCAL BIRDS IN SOUTHWESTERN NIGERIA. Transnational Journal of Science and Technology, 2 (3). pp. 1-10.

Adetunji, Adelana Razak and Abioye, Abiodun A. and Isadare, Dayo Adeyemi and Akinluwade, K. J. (2015) Material Selection for Crusher Jaw in a Jaw Crusher Equipment. International Journal of Materials Engineering, 5 (2). pp. 17-22.

Adetunji, Olajide R. and Adegbola, A.O and Afolalu, Sunday A. (2015) COMPARATIVE STUDY OF CASE-HARDENING AND WATER-QUENCHING OF MILD STEEL ROD ON ITS MECHANICAL PROPERTIES. International Journal of Advance Research, IJOAR .org, 3 (6). pp. 1-9. ISSN 2320-9135

Adetunji, Olajide R. and Musa, A. A. and Afolalu, Sunday A. (2015) Computational Modelling of Chromium Steel in High Temperature Applications. International Journal of Innovation and Applied Studies, 12 (4). pp. 1015-1021. ISSN 2028-9324

Adetunji, Olajide R. and Ude, Onwuka O. and Kuye, Sidikat I. and Dare, E.O and Alamu, Kamol O. and Afolalu, Sunday A. (2016) Potentiodynamic Polarization of Brass, Stainless and Coated Mild Steel in 1M Sodium Chloride Solution. International Journal of Engineering Research in Africa, 23. pp. 1-6. ISSN 1663-4144

Adewale, Adeyinka A. and Abdulkareem, Ademola and Agbetuyi, Ayoade F. and Ike, Dike (2013) DESIGN AND DEVELOPMENT OF A MICROCONTROLLER BASED WIRELESS SECURITY ACCESS SYSTEM. International Journal of Computer Science Engineering, 2 (5). pp. 237-246. ISSN 2319-7323

Adewale, Adeyinka A. and Ike, Dike and Adelakun, A. (2013) Fan Speed Control of Processor Based On Environmental Temperature. International Journal of Scientific & Engineering Research, 4 (11). ISSN 2229-5518

Adewale, Adeyinka A. and Ike, Dike and Ndujiuba, Charles Uzoanya and John, S. N. (2014) Improvement of Quality of Service (QOS) over a Wide Area Network (WAN) Using Multiprotocol Label Switching Traffic Engineering (MPLS-TE). International Journal of Computer Applications, 88 (10). pp. 14-18. ISSN 0975 – 8887

Adewale, Adeyinka A. and Matthews, V. O. and Ndujiuba, Charles Uzoanya and Adenrele, Adeyemi M. (2013) Reduction of Routing Delay in an Enterprise Network using Dynamic Multipoint Private Network. International Journal of Computer Applications. pp. 1-6.

Adewale, B and Alalade, G. M and Akinwande, O.A. and Daramola, A. and Joseph, Antonia and Odili, A. and Odugbesan, A. and Ogunleye, A. and Adeleke, O. J. and Oyeyiola, Moyosore and Famurewa, O. and Oladapa, M. and Olumuyiwa, O. and Eyiaro, S. and Oyeshomo, T. and Ugah, U. and Eke, W. (2018) AN INVESTIGATION OF THE EFFECTS OF POOR SPECIFICATION ON BUILDING COLLAPSE IN NIGERIA. Вестник МГСУ Том 13 Выпуск, 5. pp. 426-440.

Adewale , B. A. and Babalola, Daniel Olatunde and Jegede, Foluke and Afolabi, A.O. and Oyenuga, Temilola and Obi, Chukwuma (2018) Dataset on cost comparative analysis of different walling materials in residential buildings in a developing economy. Data in Brief, 19. pp. 1918-1924.

Adewoyin, O.O and Joshua, Emmanuel O. and Akinwumi, I. I. and Omeje, Maxwell and Joel, E. S. (2017) Evaluation of Geotechnical Parameters using Geophysical Data. J. Eng. Technol. Sci., 49 (1). pp. 95-113.

Adeyanju, EMMANUEL and Okeke, Austin Chukwueloka-Udechukwu and Akinwumi, I. I. and Busari, A. A. (2020) Subgrade Stabilization using Rice Husk Ash-based Geopolymer (GRHA) and Cement Kiln Dust (CKD). Case Studies in Construction Materials, 13.

Adeyemi, Gideon Adewale and Edeki, S.O. (2018) Dataset on spatial distribution and location of universities in Nigeria. Data in Brief, 18. pp. 1602-1608.

Adeyemi, Gideon Adewale and Markus, M. and Gbolahan, O. G. and Edeki, S.O. (2018) LANDFILL SITE SELECTION IN ADO-ODO OTA LGA USING GEOGRAPHIC INFORMATION SYSTEMS. International Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 1434-1445. ISSN 0976-6316

Adeyemi-Kayode, Temitope M. and Misra, Sanjay and Orovwode, H. E. and Adoghe, A. U. (2022) Modeling the Next Decade of Energy Sustainability: A Case of a Developing Country. Energies, 15. ISSN 1996-1073

Adeyeri, J. B and Covenant University, Public Lecture (2009) PHYSICAL INFRASTRUCTURE FOR SUSTAINABLE NATIONAL DEVELOPMENT. Covenant University 29th Public Lecture. ISSN 2006...0327

Adoghe, A. U. and Adeyemi-Kayode, Temitope M. and Oguntosin, V. (2023) Performance evaluation of the prospects and challenges of effective power generation and distribution in Nigeria. Heliyon, 9.

Adoghe, A. U. and Matthews, V. O. and Amaize, Peter and Oloweni, Joseph Oluwole and Sanni, T.F. and Ayo, Olayinka (2016) Design and Implementation of a Single-Phase Energy Meter with SMS Controlled and Monitored Recharge Capability. Journal of Energy and Power Engineering, 10. pp. 534-539.

Adoghe, A. U. and Noma-Osaghae, Etinosa and Okokpujie, Kennedy O. and Edose, Uduebholo Emmanuel (2021) A HAAR CASCADE CLASSIFIER BASED DEEP-DATASET FACE RECOGNITION ALGORITHM FOR LOCATING MISS-ING PERSONS. Journal of Theoretical and Applied Information Technology, 99 (18). ISSN 1817-3195

Adoghe, A. U. and Owuama, Ebere C. and Oguntosin, V. and Morawo, Boluwatife (2022) Design and Implementation of a Low-Cost Cloud-Powered Home Automation System. JOURNAL OF Engineering Science and Technology Review, 15 (3). pp. 177-192.

Adoghe, A. U. and Sanni, T.F. and Amaize, Peter and Airoboman, A.E (2016) Transmission Grid Decongestion Management in Deregulated Power Sector. International Journal of Latest Engineering and Management Research (IJLEMR), 1 (5). pp. 12-16. ISSN 2455-4847

Aduojo, Ameloko Anthony and Mosobalaje, O. O. and Uchegbulam, O. and Johnson, Allo Olawale and Ifeanyi, Obihan (2023) Multivariate analysis of groundwater around Solous lll dumpsite, Lagos, South- West Nigeria. Research Square.

Aduwo, B. E. and Ibem, Eziyi O. and Ayo-Vaughan, Emmanuel A. and Uwakonye, O. and Owolabi, J. D (2017) E-PROCUREMENT USE IN THE NIGERIAN BUILDING INDUSTRY. International Journal of Electronic Commerce Studies, 8 (2). pp. 219-254.

Afolabi, A.O. and Abraham, Yewande S and Awosika, Oluwafikunmi (2021) Web-based material requisition system in the supply chain of construction businesses. International Journal of Electrical and Computer Engineering (IJECE), 11 (2). pp. 1531-1538.

Afolabi, A.O. and Abraham, Yewande S and Ojelabi, Rapheal A. and Awosika, Oluwafikunmi (2021) Automation of the Requisition Process in Material Supply Chain of Construction Firms. Advances in Computer, Communication and Computational Sciences, Advances in Intelligent Systems and Computing.

Afolabi, A.O. and Abraham, Yewande S and Ojelabi, Rapheal A. and Etuk, Hephzibah (2021) Developing an AdaptableWeb-Based Profile Record Management System for Construction Firms. Advances in Computer, Communication and Computational Sciences, Advances in Intelligent Systems and Computing.

Afolabi, A.O. and Afolabi, I. T. and Akinbo, Faith and Misra, Sanjay and Ahuja, Ravin (2020) Post-occupancy Evaluation of BuDding Facilities in a University Community Using an Electronic Platform. Advances in Computational Intelligence and Informatics, lecture Notes in Network and Systems, 119.

Afolabi, A.O. and Afolabi, I. T. and Eshofonie, E. E. and Akinbo, Faith (2019) Improving Employability Skills Through a Web-Based Work Integrated Learning Database for Construction Students. ICCSA. pp. 372-382.

Afolabi, A.O. and Afolabi, I. T. and Misra, Sanjay and Akinbo, Faith (2020) Development of a Plastics and Paper Waste Management System for a University Community. ICCSA. pp. 968-979.

Afolabi, A.O. and Arome, Akpa and Akinbo, Faith T. (2020) Empirical Study on Sick Building Syndrome from Indoor Pollution in Nigeria. Scientific Foundation SPIROSKI, Skopje, Republic of Macedonia, 25 (8). pp. 395-404. ISSN 1857-9655

Afolabi, A.O. and Emeghe, Ijeoma and Oyeyipo, Opeyemi and Ojelabi, Rapheal A. (2016) Professionals’ Preference for Migrant Craftsmen in Lagos State. Mediterranean Journal of Social Sciences, 7 (1). ISSN 2039-2117

Afolabi, A.O. and Fagbenle, Olabosipo I. and Mosaku, T. O. and Ojelabi, Rapheal A. and Omuh, I. O. (2018) An Empirical Investigation on the Benefits and Leakages in the Use of Web-Based Technologies in the Construction Industry. International Journal of Applied Engineering Research, 13 (2). pp. 983-994. ISSN 0973-4562

Afolabi, A.O. and Ibem, Eziyi O. and Aduwo, B. E. and Tunji-Olayeni, P .F (2020) Digitizing the grey areas in the Nigerian public procurement system using e-Procurement technologies. International Journal of Construction Management. ISSN 2331-2327

Afolabi, A.O. and Ibem, Eziyi O. and Aduwo, B. E. and Tunji-Olayeni, P .F and Oluwunmi, Adedamola O (2019) Critical Success Factors (CSFs) for e-Procurement Adoption in the Nigerian Construction Industry. Buildings, 9 (47). pp. 1-18.

Afolabi, A.O. and Mayowa, O.A. and Ojelabi, Rapheal A. (2019) ANDROID-BASED ESTIMATING APP FOR BUILDERS ON CONSTRUCTION SITES. International Journal of Mechanical Engineering and Technology (IJMET), 10 (1). pp. 1942-1951. ISSN 0976-6359

Afolabi, A.O. and Nnaji, Chukwuma and Okoro, Chioma (2022) Immersive Technology Implementation in the Construction Industry: Modeling Paths of Risk. Buildings, 12 (3).

Afolabi, A.O. and Ojelabi, Rapheal A. and Adewale , B. A. and Akinola, Adedotun and Afolabi, Adesola (2018) Statistical exploration of dataset examining key indicators influencing housing and urban infrastructure investments in megacities. Data in Brief, 18. pp. 1725-1733.

Afolabi, A.O. and Ojelabi, Rapheal A. and Fagbenle, Olabosipo I. and Mosaku, T. O. (2017) THE ECONOMICS OF CLOUD-BASED COMPUTING TECHNOLOGIES IN CONSTRUCTION PROJECT DELIVERY. International Journal of Civil Engineering and Technology (IJCIET), 8 (12). pp. 232-242. ISSN Print: 0976-6308 and Online: 0976-6316

Afolabi, A.O. and Ojelabi, Rapheal A. and Omuh, I. O. and Tunji-Olayeni, P .F and Adeyemi, M (2018) CRITICAL SUCCESS FACTORS INFLUENCING PRODUCTIVITY OF CONSTRUCTION ARTISANS IN THE BUILDING INDUSTRY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 858-867. ISSN 0976-6359

Afolabi, A.O. and Ojelabi, Rapheal A. and Omuh, I. O. and Tunji-Olayeni, P .F and Afolabi, A. (2018) BUILDING DESIGNS AND PLUMBING FACILITIES: THE IMPLICATION FOR RISING MAINTENANCE COST. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 1336-1344. ISSN 0976-6359

Afolabi, A.O. and Ojelabi, Rapheal A. and Oyeyipo, Opeyemi (2018) An analysis of social media marketing of indigenous construction firms in Nigeria: A tool for sustainable growth. INTERNATIONAL JOURNAL OF CONSTRUCTION SUPPLY CHAIN MANAGEMENT, 8 (2). pp. 60-72.

Afolabi, A.O. and Ojelabi, Rapheal A. and Oyeyipo, Opeyemi and Tunji-Olayeni, P .F and Amusan, L. M. (2017) Integrating Construction Craft Skill Acquisition in the Built Environment Curriculum Using a Competence Based Education Approach. Research Journal of Applied Sciences, 12 (3-4). pp. 295-303. ISSN 1815-932X

Afolabi, A.O. and Ojelabi, Rapheal A. and Tunji-Olayeni, P .F and Fagbenle, Olabosipo I. and Mosaku, T. O. (2018) Survey datasets on women participation in green jobs in the construction industry. Data in Brief, 17. pp. 856-862.

Afolabi, A.O. and Ojelabi, Rapheal A. and Tunji-Olayeni, P .F and Omuh, I. O. and Adedotun, Akinola (2018) DATA ARCHITECTURE OF BUILDING MATERIALS USING WEB-BASED TECHNOLOGIES FOR SUSTAINABLE MATERIAL MANAGEMENT. International Journal of Mechanical Engineering and Technology (IJMET), 9 (6). pp. 1155-1165. ISSN 0976-6359

Afolabi, A.O. and Ojelabi, Rapheal A. and Tunji-Olayeni, P .F and Omuh, I. O. and Adedotun, Akinola and Afolabi, Adesola (2018) EMPIRICAL REVIEW OF VARIATION ORDERS’ INFLUENCE IN CONSTRUCTION PROJECT DELIVERY. International Journal of Civil Engineering and Technology (IJCIET), 9 (7). pp. 412-421. ISSN 0976-6316

Afolabi, A.O. and Ojelabi, Rapheal A. and Tunji-Olayeni, P .F and Omuh, I. O. and Afolabi, Adesola (2018) QUANTITATIVE ANALYSIS OF SOCIO-ECONOMIC DRIVERS OF HOUSING AND URBAN DEVELOPMENT PROJECTS IN MEGACITIES. International Journal of Civil Engineering and Technology (IJCIET), 9 (6). pp. 1096-1106. ISSN 0976-6316

Afolabi, A.O. and Oluwatayo, A. A. and Oyeyipo, Opeyemi and Ojelabi, Rapheal A. and Fagbenle, Olabosipo I. (2018) Assessment of Designers’ Perception of Post Conflict Housing Schemes for Internally Displaced Persons. Construction Economics and Building, 18 (1). pp. 27-47.

Afolabi, A.O. and Owolabi, J. D and Ojelabi, Rapheal A. and Oyeyipo, Opeyemi and Aina, D.A. (2017) DEVELOPMENT OF A WEB-BASED TENDERING PROTOCOL FOR PROCUREMENT OF CONSTRUCTION WORKS IN A TERTIARY INSTITUTION. Journal of Theoretical and Applied Information Technology, 95 (8). pp. 1595-1606. ISSN 1992-8645

Afolabi, A.O. and Oyeyipo, Opeyemi (2017) THE PERCEPTION OF FUTURE DECISION MAKERS ON THE BUILDING PROFESSION. Malaysian Construction Research Journal, 21 (1). pp. 55-73. ISSN 1985 - 3807

Afolabi, A.O. and Oyeyipo, Opeyemi and Ojelabi, Rapheal A. and Amusan, L. M. (2018) CONSTRUCTION PROFESSIONALS’ PERCEPTION OF A WEB-BASED RECRUITING SYSTEM FOR SKILLED LABOUR. Journal of Theoretical and Applied Information Technology, 96 (10). pp. 2885-2899. ISSN 1817-3195

Afolabi, A.O. and Oyeyipo, Opeyemi and Ojelabi, Rapheal A. and Emeghe, Ijeoma (2016) Entrepreneurial Opportunities in the Production of Building Materials. Journal of Economics and Sustainable Development, 7 (4). pp. 15-25. ISSN 2222-2855

Afolabi, A.O. and Tunji-Olayeni, P .F and Oyeyipo, Opeyemi and Ojelabi, Rapheal A. (2017) The Socio-Economics of Women Inclusion in Green Construction. Construction Economics and Building, 17 (1). pp. 70-89. ISSN 1836-0394

Afolabi, Richard Oyekunle and Aftab, Ahmad and Kim, Kiseon (2010) Security assessments of IEEE 802.15.4 standard based on X.805 framework. Int. J. Security and Networks, 5 (2/3). p. 188.

Afolabi, Richard Oyekunle and Dadlani, Aresh and Kim, Kiseon (2013) Multicast Scheduling and Resource Allocation Algorithms for OFDMA-Based Systems: A Survey. IEEE COMMUNICATIONS SURVEYS & TUTORIALS, 15 (1). pp. 240-254.

Afolabi, Richard Oyekunle and Orodu, O. D. and Efeovbokhan, Vincent Enon (2017) Properties and application of Nigerian bentonite clay deposits for drilling mud formulation: Recent advances and future prospects. Applied Clay Science, 143. pp. 39-49.

Afolabi, Richard Oyekunle and Orodu, O. D. and Efeovbokhan, Vincent Enon and Rotimi, Oluwatosin J. (2017) Optimizing the rheological properties of silica nano-modified bentonite mud using overlaid contour plot and estimation of maximum or upper shear stress limit. Cogent Engineering, 4. pp. 1-18.

Afolabi, Richard Oyekunle and Orodu, O. D. and Efeovbokhan, Vincent Enon and Rotimi, S. O (2017) Optimizing the rheological properties of silica nano-modified bentonite mud using overlaid contour plot and estimation of maximum or upper shear stress limit. Cogent Engineering.

Afolabi, Richard Oyekunle and Orodu, O. D. and Seteyeobot, Ifeanyi (2018) Predictive modelling of the impact of silica nanoparticles on fluid loss of water based drilling mud. Applied Clay Science, 151. pp. 37-45.

Afolalu, Sunday A. and Abioye, Abiodun A. and Udo, Mfon .O and Adetunji, Olajide R. and Ikumapayi, O. M. and Adejuyigbe, Samuel B. (2018) Data showing the effects of temperature and time variances on nano-additives treatment of mild steel during machining. Data in Brief, 19. pp. 456-461.

Afolalu, Sunday A. and Adejuyigbe, Samuel B. and Adetunji, Olajide R. (2015) Impacts of Carburizing Temperature and Holding Time on Wear of High Speed Steel Cutting Tools. International Journal of Scientific & Engineering Research, 6 (5). pp. 905-909. ISSN 2229-5518

Afolalu, Sunday A. and Adejuyigbe, Samuel B. and Adetunji, Olajide R. and Olusola, O. I. (2015) EFFECTS OF CARBURIZATION ON MECHANICAL PROPERTIES OF RECYCLED STEEL WITH PERM KERNEL SHELL (PKS) AS CARBON ADDITIVES. International Journal of Advance Research, 3 (5). pp. 1-7. ISSN 2320-9135

Afolalu, Sunday A. and Adejuyigbe, Samuel B. and Adetunji, Olajide R. and Olusola, O. I. (2015) Production of Cutting Tools from Recycled Steel with Palm Kernel Shell as Carbon Additives. International Journal of Innovation and Applied Studies, 12 (1). pp. 110-122. ISSN 2028-9324

Afolalu, Sunday A. and Ajayi, O. O. and Ikumapayi, O. M. and Adejuyigbe, Samuel B. (2015) Modeling and Simulation of Wave load on Periodic Support for Isolation system of offshore platform. International Journal of Scientific & Engineering Research, 6 (5). pp. 441-447. ISSN 2229-5518

Afolalu, Sunday A. and Asonaminasom, Ezekiel H and Ongbali, Samson O. and Abioye, Abiodun A. and Udo, Mfon .O and Salawu, Enesi Y. (2018) Dataset on experimental investigation of optimum carburizing temperature and holding time of bi-nano additives treatment of AISI 5130 steel. Data in Brief, 19. pp. 2279-2283.

Afolalu, Sunday A. and Asonaminasom, Ezekiel H and Ongbali, Samson O. and Abioye, Abiodun A. and Udo, Mfon .O and Salawu, Enesi Y. (2018) Dataset on experimental investigation of optimum carburizing temperature and holdingtime of bi-nano additives treatment of AISI 5130 steel. Data in Brief, 19. pp. 2279-2283.

Afolalu, Sunday A. and Ayuba, Samuel U. and Ihebom, Ikechi V. and Elewa, Remilekun R. and Oluyemi, Kehinde (2018) ROLE OF RELIABILITY MANAGEMENT TOOLS AND DOCUMENTATIONS- A REVIEW. Global Journal of EngineeringScience and Research Management, 5 (3). p. 39. ISSN 2349-4506

Afolalu, Sunday A. and Ihebom, Ikechi V. and Elewa, Remilekun R. and Ayuba, Samuel U. and Oluyemi, Kehinde (2018) HYBRID METHOD IN THE RELIABILITY ALLOCATION IN AN INDUSTRY-A REVIEW. International Journal Of Advanced Research (IJAR), 6 (3). pp. 770-773. ISSN 2320-5407

Afolalu, Sunday A. and Ongbali, Samson O. and Abioye, Abiodun A. and Ajayi, O. O. and Adelakun, Oluwasegun J and Abdulkareem, Ademola (2018) INVESTIGATION OF EFFECTS OF DAMPED AND NON-DAMPED SYSTEM ON A PLATFORM STRUCTURE. International Journal of Advance Research, 3 (6). pp. 1-9. ISSN 2320-9135

Afolalu, Sunday A. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Udo, Mfon .O and Adetunji, Olajide R. and Ikumapayi, O. M. (2017) Experimental Analysis of the Wear Properties of Carburized HSS (ASTM A600) Cutting Tool. International Journal of Applied Engineering Research, 12 (19). pp. 8995-9003. ISSN 0973-4562

Afolalu, Sunday A. and Salawu, Enesi Y. and Oluyemi, Kehinde and Ayuba, Samuel U. and Ihebom, Ikechi V. and Elewa, Remilekun R. (2018) Failure Mode and Effect Analysis a Tool for Reliability Evaluation: Review. European Journal of Engineering Research and Science, 3 (2). pp. 65-68.

Agbetuyi, Ayoade F. and Bango, Owolabi and Abdulkareem, Ademola and Awelewa, A. A. and Somefun, Tobilola Emmanuel and Olubunmi, Akinola and Oluranti, Agbetuyi (2021) Investigation of the Impact of Distributed Generation on Power System Protection. Advances in Science, Technology and Engineering Systems Journal, 6 (2). pp. 324-331.

Agbetuyi, Ayoade F. and Orovwode, H. E. and Awelewa, A. A. and Wara, S.T. and Oyediran, Tobiloba (2017) DESIGN AND IMPLEMENTATION OF AN AUTOMATIC IRRIGATION SYSTEM BASED ON MONITORING SOIL MOISTURE. Journal of Electrical Engineering.

Agboje, O. E. and Nkordeh, Nsikan and Idiake, Uzairue Stanley and Oladoyin, Ololade and Okokpujie, Kennedy O. and Bob-Manuel, Ibinabo (2020) MIMO channels: optimizing throughput and reducing outage by increasing multiplexing gain. TELKOMNIKA Telecommunication, Computing, Electronics and Control, 18 (1). pp. 419-426. ISSN 1693-6930

Agboola, Oluranti and Bakre, Boluwatife and Oladokun, Olagoke and Ayeni, .A. O. and Fayomi, O. S. I and Sadiku, Rotimi Emmanuel and Adeniyi, Amos and Popoola, Abimbola Patricia Idowu (2022) Effect of dissolved CO2 and Syzygium malaccense leaf DNA concentrations on carbon steel within a carbonic acid equilibrium. SpringerLink. ISSN 1570-646X

Agboola, Oluranti and Khalih, Ajibola Ademola and Oladokun, Olagoke and Ayeni, .A. O. and Chukwudubem, Frederick Uzokwe and Odunlami, O. A. and Elehinafe, Francis and Yahaya, Abdulrazaq and Moropeng, Lucey (2022) STATISTICAL ANALYSES OF PORE RADII ON THE PERFORMANCE OF PETNANOCOMPOSITE MEMBRANES IN THE REMOVAL OF IRON AND ANIONS FROM IBESHE RIVER. Research Square.

Agboola, Oluranti and Khalih, Ajibola Ademola and Oladokun, Olagoke and Ayeni, Augustine Omoniyi and Uzokwe, Frederick Chukwudubem and Odunlami, Olayemi O. and Elehinafe, F. Boluwaji and Yahaya, Abdulrazaq UNSPECIFIED

Agboola, Oluranti and Kolesnikov, Andrei and Sadiku, Rotimi Emmanuel (2012) Simulation and control of nanoparticle size distribution in a high temperature reactor. Polish Journal of Chemical Technology, 14 (1). 5 - 13.

Agboola, Oluranti and Maree, Jannie and Kolesnikov, Andrei and Mbaya, Richard and Sadiku, Rotimi Emmanuel (2015) Theoretical performance of nanofiltration membranes for wastewater treatment. Environ Chem Lett, 13. pp. 37-47.

Agboola, Oluranti and Maree, Jannie and Mbaya, Richard (2014) Characterization and performance of nanofiltration membranes. Environ Chem Lett, 12. pp. 241-255.

Agboola, Oluranti and Maree, Jannie and Mbaya, Richard and Kolesnikov, Andrei and Sadiku, Rotimi Emmanuel and Verliefde, Arne and D’Haese, Arnout (2015) Microscopical characterizations of nanofiltration membranes for the removal of nickel ions from aqueous solution. Korean J. Chem. Eng, 32 (4). pp. 731-742. ISSN 1975-7220

Agboola, Oluranti and Maree, Jannie and Mbaya, Richard and Zvinowanda, Caliphs Musa and Molelekwa, Gomotsegang Fred and Jullok, Nora and Bruggen, Bart Van der and Volodine, Alexander and Haesendonck, Chris Van (2014) Deposition of toxic metal particles on rough nanofiltration membranes. Korean J. Chem. Eng, 31 (8). pp. 1413-1424. ISSN 1975-7220

Agboola, Oluranti and Mokrani, Touhami and Sadiku, Rotimi Emmanuel (2016) Porous and fractal analysis on the permeability of nanofiltration membranes for the removal of metal ions. J Mater Sci, 15. pp. 2499-2511.

Agboola, Oluranti and Mokrani, Touhami and Sadiku, Rotimi Emmanuel and Kolesnikov, Andrei and Olukunle, Olubiyi Isola and Maree, Johannes Phillippus (2016) Characterization of Two Nanofiltration Membranes for the Separation of Ions from Acid Mine Water. Mine Water Environ.

Agboola, Oluranti and Oginni, Grace Ayomide and Oladokun, Olagoke and Efeovbokhan, Vincent Enon and Ayeni, .A. O. and Ayoola, A. A. and Adedamola, Adedayo Adeyanju and Alagbe, Edith Egbimhanlu. and Fayomi, O. S. I and Moropeng, Mapula Lucey and Ogunlade, Stephen Kehinde (2023) Synthesis of PET-Magnesium Oxide-Chitosan Nanocomposite Membranes for the Dehydration of Natural Gas. Periodica Polytechnica Chemical Engineering, 67 (2). pp. 213-224.

Agboola, Oluranti and Sadiku, Rotimi Emmanuel and Biotidara, O.F. (2012) The properties and the effect of operating parameters on nickel plating (review). International Journal of the Physical Sciences, 7 (3). 349 - 360. ISSN 1992 - 1950

Agboola, Oluranti and Sadiku, Rotimi Emmanuel and Ojo, O.I. and Akanji, O. and Biotidara, O.F. (2011) Influence of Operation Parameters on Metal Deposition in Bright Nickel-plating Process. Portugaliae Electrochimica Acta, 29 (2). pp. 91-100.

Agboola, Oluranti and kupolati, kahinde Williams and Fayomi, O. S. I and Ayeni, .A. O. and Ayodeji, Ayoola and Akinmolayemi, Jemima Janet and Olagoke, Oladokun and Sadiku, Rotimi Emmanuel and Oluwasegun, K.M (2021) A Review on Corrosion in Concrete Structure: Inhibiting Admixtures and Their Compatibility in Concrete. SpringerLink. ISSN 1570-646X

Agwu, Okorie Ekwe and Okoro, Emeka Emmanuel and Sanni, Samuel Eshorame (2022) Modelling oil and gas flow rate through chokes: A critical review of extant models. Journal of Petroleum Science and Engineering, 208.

Ajao, Adekunle M and Ogunbayo , Babatunde F and Ogundipe , Kunle Elizah and Joshua, Opeyemi and Olofinnade, O. M. (2018) Experimental data sets on properties of rivers and as an aggregate in replacement of crushed rock for inter locking stones production. Data in Brief, 20. pp. 602-608.

Ajayi, J.A. and Joseph, O. O and OLORUNTOBA, D. T and Joseph, O. O (2013) EXPERIMENTAL FAILURE INVESTIGATION OF AN AIRCRAFT NOSE LANDING GEAR. International Journal Metallurgical & Materials Science and Engineering (IJMMSE), 3 (1). pp. 85-92. ISSN 2278-2516

Ajayi, O. O. (2009) Assessment of utilization of wind energy resources in Nigeria. Energy Policy, 37. pp. 750-753.

Ajayi, O. O. (2010) The Potential for Wind Energy in Nigeria. WIND ENGINEERING, 34 (3). pp. 303-311.

Ajayi, O. O. and Ajanaku, K. O. (2009) NIGERIA'S ENERGY CHALLENGE AND POWER DEVELOPMENT: THE WAY FORWARD. NIGERIA'S ENERGY CHALLENGE AND POWER DEVELOPMENT: THE WAY FORWARD, 20 (3). pp. 411-413.

Ajayi, O. O. and Fagbenle, R. O. and Katende, J. and Okeniyi, Joshua Olusegun (2011) Availability of wind energy resource potential for power generation at Jos, Nigeria. Frontiers in Energy, 5 (4). pp. 376-385.

Ajayi, O. O. and Fagbenle, R. O. and Katende, J. and Okeniyi, Joshua Olusegun and Omotosho, Olugbenga Adeshola (2010) WIND ENERGY POTENTIAL FOR POWER GENERATION OF A LOCAL SITE IN GUSAU, NIGERIA. International Journal of Energy for a Clean Environment, 11. pp. 99-116. ISSN 2150-3621 ISSN On-line: 2150-363X

Ajayi, O. O. and Fagbenle, Richard O and Katende, James and Aasa, S. A. and Okeniyi, Joshua Olusegun (2013) Wind profile characteristics and turbine performance analysis in Kano, north-western Nigeria. International Journal of Energy and Environmental Engineering, 4 (1). pp. 1-15. ISSN 2251-6832

Ajayi, O. O. and Ibia, D.E and Ogbonnaya, Mercy and Attabo, Ameh and Agarana, M. C. (2017) CFD Analysis of Nanorefrigerant through Adiabatic Capillary Tube of Vapour Compression Refrigeration System. Procedia Manufacturing, 7. pp. 688-695. ISSN 2351-9789

Ajayi, O. O. and Mokryani, Geev and Edun, B.M (2022) Sustainable energy for national climate change, food security and employment opportunities: Implications for Nigeria. Fuel Communications.

Ajayi, O. O. and Mokryani, Geev and Edun, B.M (2022) Sustainable energy for national climate change, food security and employment opportunities: Implications for Nigeria. Fuel Communications, 10.

Ajayi, O. O. and Ohijeagbon, O. D. and Nwadialo, C. E. and Olasope, O (2014) New model to estimate daily global solar radiation over Nigeria. Sustainable Energy Technologies and Assessments, 5. pp. 28-36.

Ajayi, O. O. and Ohijeagbon, O. D. and Ogbonnaya, Mercy and Attabo, Ameh (2016) Wind Power Mapping and NPV of Embedded Generation System in Nigeria. International Journal of Environmental, Chemical, Ecological, Geological and Geophysical Engineering, 10 (5). pp. 479-490.

Ajayi, O. O. and Omotosho, O. A. and Ajanaku, K. O. and Olawore, Babatunde 0. (2011) Failure Evaluation of Aluminum Alloy in 2 M Hydrochloric Acid in the Presence of Cola acuminata. Environmental Research Journal, 5 (4). pp. 163-169. ISSN 1994-5396

Ajayi, Oluseyi O. and Fagbenle, R. O. and Katende, James and Okeniyi, Joshua Olusegun and Omotosho, O. A. (2010) Wind energy potential for power generation of a local site in Gusau, Nigeria. International Journal of Energy for a Clean Environment, 11 (1-4). pp. 99-116. ISSN 2150-3621

Ajayi, Oluseyi O. and Fagbenle, Richard Olayiwola and Katende, James and Okeniyi, Joshua Olusegun (2011) Availability of wind energy resource potential for power generation at Jos, Nigeria. Frontiers in Energy, 5 (4). pp. 376-385. ISSN 20951701

Ajewole, Titus Oluwasuji and Elehinafe, F. Boluwaji and Okedere, O. B. and Somefun, Tobilola Emmanuel (2021) Agro-residues for clean electricity: A thermo-property characterization of cocoa and kolanut waste blends. Heliyon, 7.

Ajibola, Abosede and Omoleye, James and Efeovbokhan, Vincent Enon (2018) Catalytic cracking of polyethylene plastic waste using synthesised zeolite Y from Nigerian kaolin deposit. Applied Petrochemical Research. pp. 1-7.

Ajibola, M. O. and Adewale , B. A. and Ijasan, K.C. (2012) Effects of Urbanisation on Lagos Wetlands. International Journal of Business and Social Science, 3 (17). pp. 310-318.

Ajibola, M. O. and Olaniyan-Adekola, M and Simon, R.F. (2012) Assessing the Effects of Urban Planning on Residential Property Values in Agege,Lagos. European Scientific Journal, 8 (11). pp. 195-214. ISSN 1857- 7431

Ajibola, M. O. and Oluwunmi, Adedamola O and Eguh, O. (2012) Examining the Factors Contributing to Affordable Housing in Kosofe Local Government Council Area, Laogs, Nigeria. Journal of Asian Business Strategy, 2 (10). pp. 206-218. ISSN 2225-4226

Akinbo, Faith and Fagbenle, Olabosipo I. and Amusan, L. M. and Afolabi, A.O. (2018) Dataset on sustainable construction practices of foreign and indigenous construction firms. Data in Brief, 20. pp. 812-818.

Akinbo, T. F. and Fagbenle, Olabosipo I. and Amusan, L. M. (2022) Assessment of knowledge management barriers and improvement strategies on public-private partnership projects in Nigeria. International Journal of Construction Management.

Akinbo, T. F. and Fagbenle, Olabosipo I. and Amusan, L. M. and Afolabi, A.O. and Tunji-Olayeni, P .F (2018) EXPLORATORY STUDY ON SUSTAINABILITY PRACTICES OF LOCALIZED AND EXPATRIATE CONSTRUCTION BUSINESSES. International Journal of Civil Engineering and Technology (IJCIET), 9 (13). pp. 1446-1456. ISSN 0976-6316

Akinjare, O. A. and Adelegan, V.A and Ajayi, A and Oyewole, S.O. (2011) Monetary Implication of Environmental Disamenities on Housing Investment in Lagos State: The Ojota Scenerio. Mediterranean Journal of Social Sciences, 2 (2). pp. 135-145. ISSN 2039 - 2117

Akinjare, O. A. and Akinjare, V.A. and Oluwatobi, A.O. (2012) Proximity of HVOTLS and Residential Rental Values in the Metropolitan Lagos. Transnational Journal of Science and Technology, 2 (8). pp. 18-29.

Akinjare, O. A. and Ogumba , O.A. and Ayedun, C. A. and Iroham, C.O. (2013) Disamenity Hazards and Rental Values in Surulere,Lagos Metropolis:A Perceptional Study of Power Lines. Ethiopian Journal of Environmental Studies and Management, 6 (1). pp. 96-103.

Akinjare, O. A. and Oloyede, S. A. and Ayedun, C. A. and Oloke, C. Olayinka (2011) Price Effects of Landfills on Residential Housing in Lagos, Nigeria. International Journal of Marketing Studies, 3 (2). pp. 64-72. ISSN 1918-7203

Akinjare, O. A. and Oloyede, S. A. and Durodola, O. D. and Akinjare, Victoria Abosede and Ayedun, C. A. (2018) AN APPRAISAL OF RISK FACTORS PECULIAR TO COMMERCIAL REAL ESTATE, STOCK AND BOND INVESTMENT PORTFOLIOS IN NIGERIA. International Journal of Civil Engineering and Technology (IJCIET), 9 (6). pp. 773-781. ISSN 0976-6316

Akinola, S. R and Simon, R.F. (2012) Sand-Digging and Soil Excavation as an Environmental Degradation Factor in Ado-Odo/Ota Local Government Area,Ogun State:An Interrogation of the Appropriateness of Construction Technology in Nigera. Journal of Sustainable Development and Environmental Protection, 2 (2). pp. 48-77.

Akinwole, Ifeoluwa Emmanuel and Alebiowu, G and Oyatogun, Grace Modupe and Abere, Dare Victor and Oluwasegun, K.M and Oyatogun, Oyeniran Amos and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Adenigba, A.E and Ayodele, T.J (2018) Synthesis and Characterization of Cowry and Crab Shells Based Chitosan for Drug Delivery. Bioceramics Development and Applications, 8 (1). pp. 1-6. ISSN 2090-5025

Akinwumi, A.R. and Nwinyi, Obinna and Ayeni, .A. O. and Ahuekwe, Eze Frank and Chukwu, M. N. (2022) An overview of the production and prospect of polyhydroxyalkanote (PHA)-based biofuels: Opportunities and limitations. Scientific African, 16.

Akinwumi, I. I. (2014) Earth Building Construction Processes in Benin City, Nigeria and Engineering Classification of Earth Materials Used. Indian Journal of Traditional Knowledge, 13 (4). pp. 686-690. ISSN 0975-1068

Akinwumi, I. I. (2014) Effects Of Waste Engine Oil Contamination On The Plasticity, Strength And Permeability Of Lateritic Clay. INTERNATIONAL JOURNAL OF SCIENTIFIC AND TECHNOLOGY RESEARCH, 3 (9). pp. 331-335. ISSN 2277-8616

Akinwumi, I. I. and Aidomojie, O. I. (2015) Effect of corncob ash on the geotechnical properties of lateritic soil stabilized with Portland cement. International Journal of Geomatics and Geosciences, 5 (3). pp. 375-392. ISSN 0976 – 4380

Akinwumi, I. I. and Ajayi, O. O. and Agarana, M. C. and Ogbiye, S. A. and Ojuri , O. O. and David, A. O. (2019) INVESTIGATION OF CALCIUM CARBIDE RESIDUE AS A STABILIZER FOR TROPICAL SAND USED AS PAVEMENT MATERIAL. WIT Transactions on The Built Environment. pp. 285-294.

Akinwumi, I. I. and Ajayi, O. O. and Joshua, Opeyemi and Sani, R. O. and Olofinnade, O. M. and Awoyera, P. O. and Ogundairo, T. O. and OGUNWOLE, ADEWALE DANIEL and Afolayan, O. D. (2019) Housing crisis: Waste glass-stabilized clay for use as fired clay bricks. IOP Conf. Series: Materials Science and Engineering, 640.

Akinwumi, I. I. and Awoyera, P. O. and Bello, O. O. (2015) Indigenous earth building construction technology in Ota, Nigeria. Indian Journal of Traditional Knowledge, 14 (2). pp. 206-212. ISSN 0975-1068

Akinwumi, I. I. and Awoyera, P. O. and Olofinnade, O. M. and Busari, A. A. and Okotie, M (2016) Rice husk as a concrete constituent: Workability, water absorption and strength of the concrete. Asian Journal of Civil Engineering, 17 (7). pp. 887-898. ISSN 1563-0854

Akinwumi, I. I. and Diwa , D. and Obianigwe, N. (2014) Effects of crude oil contamination on the index properties, strength and permeability of lateritic clay. International Journal of Applied Sciences and Engineering Research, 3 (4). pp. 816-824. ISSN 2277 – 9442

Akinwumi, I. I. and Domo-Spiff, Ayebaemi H. and Salami, Adeniyi (2019) Marine plastic pollution and affordable housing challenge: Shredded waste plastic stabilized soil for producing compressed earth bricks. Case Studies in Construction Materials, 11.

Akinwumi, I. I. and Gbadamosi, Z. O. (2014) Effects of Curing Condition and Curing Period on the Compressive Strength Development of Plain Concrete. International Journal of Civil and Environmental Research, 1 (2). pp. 83-99. ISSN 2289-6279

Akinwumi, I. I. and Ojuri , O. O. and Ogbiye, S. A. and Booth, C. A. (2017) Engineering Properties of Tropical Clay and Bentonite Modified with Sawdust. Acta Geotechnica Slovenica, 14 (2). pp. 47-56. ISSN 1854-0171

Akinwumi, I. I. and Olatunbosun, O. M. and Olofinnade, O. M. and Awoyera, P. O. (2014) Structural Evaluation of Lightweight Concrete Produced Using Waste Newspaper and Office Paper. Civil and Environmental Research , 6 (7). pp. 160-167. ISSN ISSN 2224-5790 (Paper) ISSN 2225-0514 (Online)

Akinwumi, S. A. and Omotosho, T. V. and Usikalu, M.R. and Odetunmibi, , O. A. and Ometan, Oluwafunmilayo O. and Adewusi, M. O. (2018) Dataset of surface water vapour density in southeast,Nigeria. Data in Brief, 18. pp. 131-138. ISSN 2352-3409

Akinyemi, Olusegun Peter and Udonne, Joseph Denis and Efeovbokhan, Vincent Enon and Ayoola, A. A. (2016) A study on the use of plant seed oils, triethanolamine and xylene as flowimprovers of Nigerian waxy crude oil. Journal of Applied Research and Technology. pp. 195-105.

Akpaida, V. O. A. and Anyasi, F. I. and Uzairue, Stanley Idiake and Idim, A. I. (2018) Determination of an Outdoor Path Loss Model and Signal Penetration Level in Some Selected Modern Residential and Office Apartments in Ogbomosho, Oyo State, Nigeria. Journal of Engineering Research and Reports, 1 (2). pp. 1-25.

Akpaida, V. O. A. and Anyasi, F. I. and Uzairue, Stanley Idiake and Idim, A. I. and Alashiri, Olaitan (2018) A Review Investigation on Outdoor and Indoor Propagation Models. Journal of Materials Science Research and Reviews, 1 (1). pp. 1-11.

Al-Attar, Alyaa A. and Hamada, Hussein M. and Tayeh, Bassam A. and Awoyera, P. O. (2022) Exploring engineering properties of waste tire rubber for construction applications - a review of recent advances. Materials Today.

Alaba, Peter Adeniyi and Abbas, Ali and Daud, Wan Mohd Wan (2017) Insight into catalytic reduction of CO2: Catalysis and reactor design. Journal of Cleaner Production. pp. 1298-1312.

Alaba, Peter Adeniyi and Abbas, Ali and Huang, Jun and Daud, Wan Mohd Wan (2018) Molybdenum carbide nanoparticle: Understanding the surface properties and reaction mechanism for energy production towards a sustainable future. Renewable and Sustainable Energy Reviews, 91. pp. 287-300.

Alaba, Peter Adeniyi and Oladoja, Nurudeen Abiola and Sani, Yahaya Muhammad and Ayodele, Olumide Bolarinwa and Mohammed, Isah Yakub and Olupinla, Sunday Felix (2018) Insight into wastewater decontamination using polymeric adsorbents. Journal of Environmental Chemical Engineering, 6. pp. 1651-1672.

Alaba, Peter Adeniyi and Sani, Yahaya Muhammad and Daud, Wan Mohd Wan (2016) A comparative study on thermal decomposition behavior of biodiesel samples produced from shea butter over microand mesoporous ZSM-5 zeolites using different kinetic models. J Therm Anal Calorim.

Alaba, Peter Adeniyi and Sani, Yahaya Muhammad and Mohammed, Isah Yakub and Daud, Wan Mohd Wan (2015) Insight into catalyst deactivation mechanism and suppression techniques in thermocatalytic deoxygenation of bio-oil over zeolites. Rev Chem Eng.

Alaba, Peter Adeniyi and Sani, Yahaya Muhammad and Olupinla, Sunday Felix and Daud, Wan Mohd Wan and Mohammed, Isah Yakub and Enweremadu, Christopher C. and Ayodele, Olubunmi O. (2017) Toward N-nitrosamines free water: Formation, prevention, and removal. CRITICAL REVIEWS IN ENVIRONMENTAL SCIENCE AND TECHNOLOGY, 47 (24). pp. 2448-2489.

Alagbe, Edith Egbimhanlu. and Amoo, Temiloluwa E. and Ayeni, .A. O. and Oyedele, Oluwakayode S. and Ashiekaa, Vershima D. (2022) Computational Simulation of Atherosclerosis Progression Associated with Blood Pressure in a 2-D Idealized Human Carotid Artery Model. The Open Chemical Engineering Journal.

Alagbe, Edith Egbimhanlu. and Ayoola, A. A. and Shokunbi, A. A. and Agboola, Oluranti (2023) GLYCOLYSIS OF WASTE PET BOTTLE USING ETHYLENE GLYCOL AS A SOLVENT AND A CALCINED SNAIL SHELL AS A CATALYST. JOURNAL OF SOUTHWEST JIAOTONG UNIVERSITY, 58 (3). ISSN 0258-2724

Alagbe, Edith Egbimhanlu. and Okoye, G. C. and Amoo, T. E. and Adekeye, B. Temitope and Taiwo, O. S. and Adeyemi, A.O. and Daniel, E.O. (2022) Spontaneous and controlled fermentation to improve nutritional value of Ikpakpa beans, Phaseolus vulgaris. Cogent Engineering. pp. 1-10.

Alaigba, David and Orodu, O. D. and Aguilera, Maria (2016) Production Optimization in the Duke Field Using the IPM Suite. SPE-184311-MS.

Alayande, A. S. and Owoicho, O. D. and Somefun, Tobilola Emmanuel and Olowoleni, J. O. and Okakwu, Ignatius Kema and Abdulkareem, Ademola (2021) Power Quality Considerations for Distributed Generation Integration in the Nigerian Distribution Network Using NEPLAN Software. International Journal of Energy Economics and Policy, 11 (5). pp. 331-342. ISSN 2146-4553

Alayande, A. S. and Somefun, A.O and Somefun, Tobilola Emmanuel and Ademola, A. and Awosope, C. O. A. and Okoyeigbo, Obinna and Popoola, Olawale (2021) Transient Stability Enhancement of a Power System Considering Integration of FACT Controllers Through Network Structural Characteristics Theory. Advances in Science, Technology and Engineering Systems Journal, 6 (1). pp. 968-981.

Alfa, I. M. and Owamah, H.I. and Onokwai, Anthony O. and Gopikumar, Sudalaimuthu and Oyebisi, S.O and Kumar, Smita Subodh and Bajar, Somvir and Samuel, O.D. and Ilabor, Samuel Chukwujindu (2020) Evaluation of biogas yield and kinetics from the anaerobic co-digestion of cow dung and horse dung: a strategy for sustainable management of livestock manure. Energ. Ecol. Environ..

Aliu, Adekunle O. and Olalusi, Oladimeji B. and Awoyera, P. O. and Kiliswa, Moses (2023) Evaluation of pozzolanic reactivity of maize straw ash as a binder supplement in concrete. Case Studies in Construction Materials, 18.

Ameloko, A. and Ayolabi, Elijah Adebowale and Akinmosin, Adewale (2018) Time dependent electrical resistivity tomography and seasonal variation assessment of groundwater around the Olushosun dumpsite Lagos, South-west, Nigeria. Journal of African Earth Sciences, 147. pp. 243-253.

Ameloko, A. and Ayolabi, Elijah Adebowale and Enaworu, E. and Bolujo, E. O. (2018) ASSESSMENT OF LEACHATE CONTAMINATION OF GROUNDWATER AROUND IGHENRE EKOTEDO DUMPSITE, OTA , SOUTHWEST NIGERIA. Petroleum and Coal, 60 (5). pp. 890-902. ISSN 1337-7027

Ameloko, A. and Omali, Aurelius O. (2011) Groundwater Exploration with D.C Resistivity Method In Maigamo Area of Kubanni River Basin Zaria, Nigeria. World Rural Observations, 3 (1). pp. 72-81.

Ameloko, A. and Owoseni, A. M. (2015) Hydrocarbon reservoir evaluation of X-field, Niger Delta using seismic and petrophysical data. International Journal of Innovation and Scientific Research, 15 (1). pp. 193-201. ISSN 2351-8014

Ameloko, A. and Uhegbu, George Chiemeziem and Bolujo, E. O. (2019) Evaluation of seismic and petrophysical parameters for hydrocarbon prospecting of G-field, Niger Delta, Nigeria. Journal of Petroleum Exploration and Production Technology, 9. ISSN 2531–2542

Amoo, Kehinde O. and Onyeozili, Edith N. and Kalu, Egwu E. and Omoleye, James and Efeovbokhan, Vincent Enon (2016) Activity of varying compositions of CoeNieP catalysts for the methanolysis of ammonia borane. i n t e r n a t i o n a l j o u r n a l o f h y d r o g e n e n e r g y, xxx. pp. 1-15.

Amusan, L. M. and Afolabi, A.O. and Ojelabi, Rapheal A. and Omuh, I. O. and Okagbue, H. I. (2018) Data exploration on factors that influences construction cost and time performance on construction project sites. Data in Brief, 17. pp. 1320-1325.

Amusan, L. M. and Aigbavboa, Clinton and Emetere, Moses and Blossom, Oyeyipo and Ogunbayo, Babatunde F (2020) Building Informatics: Exploratory Approach to Post Occupancy Narratives of Automotive Intelligent and Non Intelligent Building Components. JOURNAL OF CRITICAL REVIEWS, 7 (11). pp. 2889-2896. ISSN 2394-5125

Amusan, L. M. and Aigbavboa, Clinton and Emetere, Moses and Oloke, O. C. (2023) ADOPTION OF INDUSTRY 4.0 TOOLS IN ACHIEVING CONSTRUCTION 4.0 FOR SUSTAINABLE INFRASTRUCTURE DEVELOPMENT. JOURNAL OF AERONAUTICAL MATERIALS, 43 (1). pp. 631-656. ISSN 1005-5053

Amusan, L. M. and Aigbavboa, Clinton and Fayomi, O. S. I and Owolabi, J. D (2020) Lean Thinking and Industrial 4.0 Approach to Achieving Construction 4.0 for Industrialization and Technological Development. Buildings, 20. pp. 1-27.

Amusan, L. M. and Aigbavboa, Clinton and Olubiyi, Tolulope and Ogunbayo, Babatunde F (2021) Informatics Approach to Innovative Site Management Practices for Improving Construction Works. International Review of Civil Engineering (I.RE.C.E.),, 12 (2). pp. 108-122. ISSN 2036 - 9913

Amusan, L. M. and Akintaro, Hezekiah and Osawaru, FAITH and Makinde, Adebisi and Tunji-Olayeni, P .F and Akomolafe, Maryam (2018) INFORMATION ON STATE OF CHALLENGES OF WASTE MANAGEMENT SYSTEM IN NIGERIA URBAN HOUSING SYSTEM. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (2). pp. 75-86. ISSN 2249-8001

Amusan, L. M. and Ashiga, Andrew Shalem and Emetere, Moses and Ojelabi, Rapheal A. (2020) Mechanically Induced-Sound Approach to Producing Alternative Electricity. BOREAL ENVIRONMENT RESEARCH, 25 (7). pp. 1-20. ISSN 1239-6095

Amusan, L. M. and Ayo, C. K. and Ebunoluwa, Adeyemi and Joshua, Opeyemi and Ojelabi, Rapheal A. (2018) DATA ON EXPERT SYSTEM-ECONOMETRIC ENTROPY INFORMATICS MODEL FOR ADJUDICATING RESIDENTIAL BUILDING PROJECT COSTS. Data in Brief.

Amusan, L. M. and Ayo, C. K. and Mosaku, Timothy Olusoji and Fagbenle, Olabosipo I. and Tunji-Olayeni, P .F and Owolabi, J. D and Omuh, I. O. and Ogunde, Ayodeji (2013) Neural Network-Ant Colony Optimization Model of Residential Building Project Cost: Exploratory Approach. IBIMA CONFERENCE PROCEEDINGS. pp. 2104-2117.

Amusan, L. M. and Ayo-Yussuf, Kehinde and Ogunde, Ayodeji and Tunji-Olayeni, P .F and Afolabi, A.O. and Owolabi, J. D (2018) WORK ORDER BUILDING INFORMATICS PLATFORM FOR PLANNING RESIDENTIAL BUILDING PROJECTS AND MAINTENANCE WORK. International Journal of Civil Engineering and Technology (IJCIET), 9 (9). pp. 135-146. ISSN 0976-6316

Amusan, L. M. and Ayo-Yussuf, Kehinde and Omuh, I. O. and Awotinde, Ladi (2019) EXPLORING FACTORS THAT INFLUENCES THE ADOPTION OF ICT-BASED BUILDING AND CONSTRUCTION INFORMATIC PLATFORMS. International Journal of Civil Engineering and Technology (IJCIET), 10 (1). pp. 2299-2308. ISSN 0976-6316

Amusan, L. M. and EZEWINWE, OLUCHI and Osawaru , FAITH and Joshua, Opeyemi and Afolabi, A.O. and Ojelabi, Rapheal A. (2018) CREATING SUSTAINABLE CONSTRUCTION: BUILDING INFORMATICS MODELLING AND LEAN CONSTRUCTION APPROACH. Journal of Theoretical and Applied Information Technology, 96 (10). pp. 3025-3035. ISSN 1992-8645

Amusan, L. M. and Ehanire, Maruosa Kathyrine and Owolabi, J. D and Ojelabi, Rapheal A. (2021) INDICATORS OF WORKERS’ SATISFACTION WITH CORPORATE SOCIAL RESPONSIBILITY INITIATIVES IN CONSTRUCTION FIRMS. JOURNAL OF SOUTHWEST JIAOTONG UNIVERSITY, 56 (2). pp. 451-468.

Amusan, L. M. and Emetere, Moses and Ojelabi, Rapheal A. (2021) Exploratory Approach to Performance ofSmart Components of Intelligent [Smart]Buildings. Exploratory Approach to Performance of Smart Components of Intelligent [Smart] Buildings. pp. 1-6.

Amusan, L. M. and Ojo, Boluwatife and Aigbavboa, Clinton and Oguntunde, Ayodeji (2023) INFLUENCE OF FUNDING ON COMPLETION TIME OF CONSTRUCTION PROJECTS. Journal of Data Acquisition and Processing, 38 (4).

Amusan, L. M. and Okalome, Chukwuemeka and Aigbavboa, Clinton (2022) Exploratory Approach to Issues and Strategy Involved in Creating Industrial Revolution Time Environmental Sustainability by Construction Firms on Sites. sustainability, 14. pp. 1-26.

Amusan, L. M. and Oloniju, Leke I, and Akomolafe, Maryam and Makinde, Adebisi and Peter, Nkolika Joy and Farayola, Hezekiah and Osawaru , FAITH (2018) ADOPTING INFORMATION AND COMMUNICATION TECHNOLOGY IN CONSTRUCTION INDUSTRY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 739-746. ISSN 0976-6359

Amusan, L. M. and Osawaru, FAITH and Akanya, Cinwosoko Ninma and Awotinde, Oladipupo Sunday (2018) Data on System Approach to Process of urban housing construction, renewal and upgrading. Data in Brief, 19. pp. 2427-2437.

Amusan, L. M. and Osinowo, Samuel and Osawaru, FAITH and Awotinde, Ladi and Adelakun, A. and Peter, Nkolika Joy (2019) THE BUILDING INFORMATICS APPROACH TO MODELLING CONSTRUCTION QUALITY ASSURANCE PARAMETERS TO PREVENT STRUCTURAL COLLAPSE OF BUILDING. International Journal of Technology, 10 (2). pp. 386-393. ISSN 2086-9614

Amusan, L. M. and Owolabi, J. D and Nduka, David and Ogundipe, Elisha and Akinbo, T. F. and Akinbile, Bolatito (2019) BUILDING INFORMATICS: REVIEW OF SELECTED INFORMATICS PLATFORM AND VALIDATING SYSTEMS FOR INFORMATION COMMUNICATION TECHNOLOGY SYSTEMS. International Journal of Mechanical Engineering and Technology (IJMET), 10 (5). pp. 399-409. ISSN 0976-6359

Amusan, L. M. and Owolabi, J. D and Ogunde, Ayodeji and Tunji-Olayeni, P .F and Ojelabi, Rapheal A. and Omuh, I. O. and Afolabi, A.O. and Ugochukwu, Robert (2017) Vocational Skill Mobility and Its Effect on Occupational Engagement Among Tradesmen and Craftsmen in Building Sector. TURKISH ONLINE JOURNAL OF EDUCATIONAL TECHNOLOGY. pp. 809-816.

Amusan, L. M. and Owolabi, J. D and Tunji-Olayeni, P .F and Ojelabi, Rapheal A. and Omuh, I. O. and Ogunde, Ayodeji and Joshua, Opeyemi (2017) Repositioning Technical Education a Panacea to Solving Globalization Challenges in Construction Sector. TOJET.

Amusan, L. M. and Owolabi, J. D and Tunji-Olayeni, P .F and Peter, Nkolika Joy and Omuh, I. O. (2014) ASSESING THE EFFECTIVENESS OF MAINTENANCE PRACTICES IN PUBLIC SCHOOLS. European International Journal of Science and Technology, 3 (3). pp. 103-109. ISSN ISSN: 2304-9693

Amusan, L. M. and Vianana, Ebitimi and Aigbavboa, Clinton (2023) Influence of Industry 4.0 Applications and Development of Internet of Things (IoT)-Based Logic Framework in Energy Management Systems in Buildings. International Review of Civil Engineering (IRECE), 14 (5).

Amuta, Elizabeth and Wara, S.T. and Agbetuyi, Ayoade F. and Matthew, Simeon and Shomefun, Tobi (2019) HYBRIDIZATION OF BIOMASS - SOLAR PV (PHOTOVOLTAIC) MICROGRID POWER STEM POTENTIALS FOR KADUNA IN NIGERIA. International Journal of Mechanical Engineering and Technology (IJMET), 10 (4). pp. 1022-1030. ISSN 0976-6359

Anabi, Hilary Kelechi and NOR, FADZILAH ABDULLAH and ROSDIADEE, NORDIN and MAHAMOD, ISMAIL (2017) D-GRACE: Discounted Spectrum Price Game-Based Resource Allocation in a Competitive Environment for TVWS Networks. IEEE Access, 5. pp. 7579-7592.

Anakhu, Peter I. and Bolu, Christian and Abioye, Abiodun A. and Azeta, Joseph (2018) Fused Deposition Modeling Printed Patterns for Sand Casting in a Nigerian Foundry: A Review. International Journal of Applied Engineering Research, 13 (7). pp. 5113-5119. ISSN 0973-4562

Anakhu, Peter I. and Bolu, Christian and Abioye, Abiodun A. and Onyiagha, G. and Boyo, H.O. and Jolayemi, K. and Azeta, Joseph (2018) Innovative Foundry Technology and Material Using Fused Deposition Modeling and Polylactic Acid Material in Sand Casing. A R C H I V E S o f F O U N D R Y E N G I N E E R I N G, 18 (2). pp. 65-71. ISSN 2299-2944

Anawe, Paul Apeye Lucky and Fayomi, O. S. I (2017) Impact of Applied Potential on the Structural and Non-lubricated Wear Composite Coating in Petrochemical Industry. Portugaliae Electrochimica Acta , 35 (5). 297-303 . ISSN 1647-1571

Anawe, Paul Apeye Lucky and Fayomi, O. S. I and Ayoola, A. A. and Popoola, A. P. I. (2018) Effect of SnO2/SiO2 nano particle dispersant on the performance characteristic of complex multi-doped composite coating produced through electrodeposition on oil and gas storage tap. Results in Physics, 9. pp. 1570-1571.

Anawe, Paul Apeye Lucky and Fayomi, O. S. I and Popoola, A. P. I. (2017) Investigation of microstructural and physical characteristics of nano composite tin oxide-doped Al3+ in Zn2+ based composite coating by DAECD technique. Results in Physics, 7. pp. 777-788.

Anawe, Paul Apeye Lucky and Folayan , A. J, (2018) Experimental investigation of fluid loss and cake thickness control ability of zirconium (IV) oxide (. International Journal of Engineering & Technology, 7 (2). pp. 702-707.

Anawe, Paul Apeye Lucky and Folayan , A. J, (2018) Uncertainties quantification and modelling of different rheological models in estimation of pressure losses during drilling operation. International Journal of Engineering & Technology, 7 (2). 694--701.

Anoprijenko, A. and John, S. N. and Ababneh, H. Al (2007) SIMULATION TOOLS AND SERVICES FOR MOBILE USERS: HISTORY, STATE-OF-THE-ART AND FUTURE. Donetsk National Technical University.

Anozie, Ambrose Nwora and Salami, A. O. and Babatunde, Damilola Elizabeth and Babatunde, Odunayo E. (2018) Comparative evaluation of processes for production of soybean meal for poultry feed in Nigeria Evaluación comparativa de procesos para la producción de harina de soya para la alimentación de pollos en Nigeria. Cuban Journal of Agricultural Science, 52 (2). pp. 1-10.

Anyasi, F. I. and Uzairue, Stanley Idiake (2014) Determination of GSM Signal Strength Level in Some Selected Location in EKPOMA. Journal of Electronics and Communication Engineering (IOSR-JECE), 9 (2). 08-15. ISSN 2278-2834

Anyasi, F. I. and Uzairue, Stanley Idiake and Enehizena, O.N and Matthews, V. O. and Amaize, Peter and Nkordeh, Nsikan (2018) Design and Analysis of a Broadcast Network Using Logical Segmentation. TELKOMNIKA, 16 (2). pp. 803-810. ISSN 1693-6930

Anyasi, F. I. and Uzairue, Stanley Idiake and Mkpuluma, David and Idim, A. I. and Ighalo, Joshua (2018) Design and Implementation of a Cattle Grazing Tracking and Anti-theft Alert GPS/GSM Collar, Leveraging on Improvement in Telecom and ICT Infrastructure. Asian Journal of Advanced Research and Reports, 1 (2). pp. 1-9.

Aremu, A. S. and Aremu, A. O. and Olukanni, D. O. (2015) ASSESSMENT OF NOISE POLLUTION FROM SAWMILL ACTIVITIES IN ILORIN, NIGERIA. Nigerian Journal of Technology (NIJOTECH), 34 (1). pp. 72-79.

Asangansi, Ime and Meribole, Emmanuel and Adoghe, A. U. and Ajaka, Chiamaka and Noiki, Ifeoluwa and Shiishi-Gyer, Doosuur and Sanni, Abdulqudus Developing A Central Analytic Repository To Improve Decision Making By Stakeholders. Research Square.

Asekomeh, Ayodele and Gershon, Obindah and Azubuike, Smith I. (2021) Optimally Clocking the Low Carbon Energy Mile to Achieve the Sustainable Development Goals: Evidence from Dundee’s Electric Vehicle Strategy. Energies, 14 (842). pp. 3-23. ISSN 1996-1073

Ashwin, K.R.N. and Arun, M. and Sasikumar, S. and Krishnaraj, T. and Mithuna, R. and Gobinath, R and Akinwumi, I. I. (2017) Freeze-thaw Resistance of an Alluvial Soil Stabilized with EcoSand and Asbestos-free Fiber Powder. International Journal of Geomatics and Geosciences, 7 (4). pp. 352-357. ISSN 0976 – 4380

Asuke, F. and Abdulwahab, M and Aigbodion, V.S. and Fayomi, O. S. I and Aponbiede, O. (2014) Effect of load on the wear behaviour of polypropylene/carbonized bone ash particulate composite. egy p t i a n j o u rnal of b a s i c and ap p l i ed s c i e n c es. pp. 67-70.

Asuke, F. and Abdulwahab, M and Fayomi, O. S. I and Aigbodion, V.S. and Popoola, A. P. I. (2015) Inhibitive Action of Potassium Iodide on the Corrosion of Stir-Cast Al–Si/SiC in NaCl-KI Interface. J Fail. Anal. and Preven, 15. pp. 822-827.

Asuke, F. and Aigbodion, V.S. and Abdulwahab, M and Fayomi, O. S. I and Popoola, A. P. I. and Nwoyin, C.I. and Garba, B. (2012) Effects of bone particle on the properties and microstructure of polypropylene/bone ash particulate composites. Results in Physics, 2. pp. 135-141.

Atanda, P. O. and Abioye, Abiodun A. and Iyiola, A. O. (2015) Mechanical Behaviour and Microstructural Characterization of Carbon Steel Samples from Three Selected Steel Rolling Plants. American Journal of Engineering Research (AJER), 4 (11). pp. 47-56. ISSN 2320-0847

Atanda, P. O. and Abioye, Abiodun A. and Olorunniwo, O. E. and Oluwole, O. O. (2014) Material Selection for Fuel Fired Crucible Furnace Using GRANTA. International Journal of Scientific & Engineering Research, 5 (7). ISSN 2229-5518

Atanda, P. O. and Ijitona, O. and Oluwole, O. O. (2011) Corrosive Effect of Pineapple Juice on the Fatigue and Hardness Properties of Austempered Ductile Iron. International Journal of Materials Engineering, 1 (1). pp. 21-25.

Atanda, P. O. and Olorunniwo, O. E. and Abioye, Abiodun A. and Oluwole, O. O. (2014) Modeling heat flow across fuel-fired crucible furnace using ADINA. International Journal of Scientific & Engineering Research, 5 (7). pp. 608-614. ISSN 2229-5518

Atayero, A. A. and Williams, Rotimi and Badejo, J. A. and Popoola, Segun I. (2019) CLOUD BASED IoT-ENABLED SOLID WASTE MONITORING SYSTEM FOR SMART AND CONNECTED COMMUNITIES. International Journal of Civil Engineering and Technology, 10 (2). pp. 2308-2315. ISSN 0976-6308 and ISSN Online: 0976-6316

Atuegwu, Charity and Daramola , S.A and Okokpujie, Kennedy O. and Noma-Osaghae, Etinosa (2018) Development of an Improved Fingerprint Feature Extraction Algorithm for Personal Verification. International Journal of Applied Engineering Research , 13 (9). pp. 6608-6612. ISSN 0973-4562

Awelewa, A. A. and Agbetuyi, Ayoade F. and Odigwe, I. A. and Samuel, I. A. and Mbanisi, Kenechukwu C (2013) Analysis and Simulation of a Single Generator-Infinite Bus Power System under Linear Quadratic Regulator Control. International Journal of Scientific & Engineering Research,, 4 (10). pp. 587-593. ISSN 2229-5518

Awelewa, A. A. and Awosope, C. O. A. and Abdulkareem, Ademola and Agbetuyi, Ayoade F. (2016) Investigation of the Performance of of Synchronous Generators Equipped with Nonlinear Excitation Controller. International Journal of Scientific & Engineering Research, 7 (7). pp. 1508-1513.

Awelewa, A. A. and Mbanisi, Kenechukwu C and Majekodunmi, Samuel O and Odigwe, I. A. and Agbetuyi, Ayoade F. and Samuel, I. A. (2013) Development of a Prototype Robot Manipulator for Industrial Pick-and-Place Operations. International Journal of Mechanical & Mechatronics Engineering, 13 (5). pp. 20-27.

Awolu, O.O and Ojewumi, M. E. and Isa, John and Ojo, Deborah O. and Olofin, Hellen I. and Jegede, Stella O. (2017) Comparative analyses of functional, pasting and morphological characteristics of native and modified tigernut starches with their blends. Cogent food and Agriculture.

Awosope, C. O. A. and Covenant University, Public Lecture (2014) NIGERIA ELECTRICITY INDUSTRY: ISSUES, CHALLENGES AND SOLUTIONS. Covenant University 38th Public Lecture. ISSN 2006...0327

Awoyera, P. O. and Adesina, Adeyemi and Gobinath, R (2019) Role of recycling fine materials as filler for improving performance of concrete - a review. Australian Journal of Civil Engineering.

Awoyera, P. O. and Akinrinade, Ayomide D. and Galdino, Andr ́e Gustavo de Sousa and Althoey, Fadi and Kirgiz, Mehmet S. and Tayeh, Bassam A. (2022) Thermal insulation and mechanical characteristics of cement mortar reinforced with mineral wool and rice straw fibers. Journal of Building Engineering, 53.

Awoyera, P. O. and Akinwumi, I. I. and Karthika, V. and Gobinath, R and Gunasekaran, R. and Lokesh, N. and Manikandan, M. and Narmatha, T. (2019) Lightweight Self-Compacting Concrete Incorporating Industrial Rejects and Mineral Admixtures: Strength and Durability Assessment. Silicon.

Awoyera, P. O. and Althoey, Fadi and Ajinomisan, Hephzibah and Mydin, Md Azree Othuman and Bheel, Naraindas and Sabri, Mohanad Muayad Sabri and Hadidi, Haitham M. and Jayanthi, V. and Ahmad, Mahmood (2023) Potential of natural rubber latex in cement mortar for thermal insulating material in buildings. Frontiers in Materials. pp. 1-11.

Awoyera, P. O. and Bheel, Naraindas and Adesina, Adeyemi and Olalusi, Oladimeji B. (2022) Alkali-activated materials: advances on accelerated and long-term durability assessment and methodologies—a short review. Innovative Infrastructure Solutions volume, 7 (291).

Awoyera, P. O. and Effiong, John Uduak and Olalusi, Oladimeji B. and Arunachalam, Krishna Prakash and Azevedo, Afonso R. G. de and Martinelli, Flavia R. B. and Monteiro, Sergio Neves (2022) Experimental Findings and Validation on Torsional Behaviour of Fibre-Reinforced Concrete Beams: A Review. Polymers, 14. pp. 1-30.

Awoyera, P. O. and Effiong, John Uduak and Olalusi, Oladimeji Benedict and Arunachalam, Krishna Prakash and Martinelli, Flavia R. B. and Monteiro, Sergio Neves (2022) Experimental findings and validation on torsional behaviour of fibre-reinforced concrete beams: a review. polymers.

Awoyera, P. O. and Najm, Hadee Mohammed and Adefarati, Olusegun David and Eldirderi, Moutaz Mustafa A. and Khedher, Khaled Mohamed and Dughaishi, Husam Al and Lawati, Jawad Al and Milad, Abdalrhman (2023) Postfire Residual Strength and Morphology of Concrete Incorporating Natural Rubber Latex Exposed to Elevated Temperatures. Advances in Civil Engineering.

Awoyera, P. O. and Odutuga, Oluwaseun L. and Effiong, John Uduak and Sarmiento, Astelio De Jesus Silvera and Mortazavi, Seyed Javad and Hu, Jong Wan (2022) Development of Fibre-Reinforced Cementitious Mortar with Mineral Wool and Coconut Fibre. MATERIALS. ISSN 1392–1320

Awoyera, P. O. and Olofinnade, O. M. (2015) Evaluation of Sustainable Concrete Production and Construction Cost Implication in Nigeria. International Journal Of Science and Technology (STECH), 4 (4). pp. 119-128. ISSN 2227-5452

Ayara, Williams A. and UHUEGBU, Chidi C. (2011) POWER TRANSISTOR AND PHOTODIODE AS A SOLAR CELL DEVICE. POWER TRANSISTOR AND PHOTODIODE AS A SOLAR CELL DEVICE, 3 (2). pp. 1693-1704. ISSN 0975-5462

Ayedun, C. A. (2016) The Siege on Estate Surveying and Valuation Profession in the Global Setting: A Review of Nigeria Experience. Covenant Journal in Research & Built Environment, 4 (2).

Ayedun, C. A. and Akinjare, O. A. and Omodo, E. and Alimi, R.K. (2022) Geographical Information System (GIS) Application to Property Valuation Practices in Port Harcourt Metropolis of Rivers State, Nigeria. Journal of International Cooperation and Development, 5 (1). pp. 19-33. ISSN 2612-4793

Ayedun, C. A. and Durodola, O. D. and Akinjare, O. A. (2011) Towards Ensuring Sustainable Urban Growth and Development in Nigeria: Challenges and Strategies. Business Management Dynamics, 1 (2). pp. 99-104. ISSN 2047-7031

Ayedun, C. A. and Durodola, O. D. and Oloyede, S. A. and Akinjare, O. A. and Oni, A.S (2018) AN EMPIRICAL EVALUATION OF THE FACTORS MILITATING AGAINST VALUATION ACCURACY IN NIGERIA. International Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 752-762. ISSN 0976-6316

Ayedun, C. A. and Durodola, O. D. and Oloyede, S. A. and Oni, A.S (2018) The Value Added Tax (VAT) Administration in Nigeria and the Practice of Estate Surveying and Valuation. Covenant Journal of Business & Social Sciences (CJBSS), 9 (1). pp. 1-10.

Ayedun, C. A. and Durodola, O. D. and Oni, A.S and Oluwatobi, A. O. and IKOTUN, Oluwaseun Titilope (2018) THE FLOODING EFFECT ON RESIDENTIAL PROPERTY VALUES: A CASE STUDY OF SHOGUNRO RESIDENTIAL ESTATE, AGEGE;LAGOS STATE NIGERIA. International Journal of Civil Engineering and Technology (IJCIET), 9 (6). pp. 489-496. ISSN 0976-6316

Ayedun, C. A. and Oloyede, S. A. and Adesiyan, Samuel and Durodola, O. D. and Akinjare, O. A. (2018) STUDY OF SPECULATIVE ENTERPRENEUR RESIDENTIAL HOUSING DEVELOPERS’ INITIATIVES IN LAGOS STATE, NIGERIA. Academy of Entrepreneurship Journal, 24 (4).

Ayedun, C. A. and Oloyede, S. A. and Durodola, O. D. and Akinjare, O. A. (2018) BUILDING FAILURE AND COLLAPSE: A FRAMEWORK FOR TACKLING ITS SCOURGE IN NIGERIA. International Journal of Mechanical Engineering and Technology, 9 (9). pp. 395-404. ISSN 0976-6359

Ayedun, C. A. and Oloyede, S. A. and Iroham, C.O. and Oluwunmi, Adedamola O (2011) Clients’ Perception of the Reliability of Property Investment Valuation in Nigeria. Mediterranean Journal of Social Sciences, 2 (3). pp. 479-486. ISSN 2039-2117

Ayedun, C. A. and SULAIMAN, I.B. and ALIMI, R.A. and Akinjare, O. A. (2022) STAKEHOLDERS’ PERCEPTION OF THE LAGOS STATE LAND USE CHARGE ASSESSMENT METHOD. International Journal of Social Sciences and Management Review, 5 (1). pp. 88-111. ISSN 2582-0176

Ayeni, .A. O. and Agboola, Oluranti and Daramola, Olawande and Grabner, Bianca and Oni, Babalola Aisosa and Babatunde, Damilola Elizabeth and Evwodere, Joseph (2020) Kinetic study of activation and deactivation of adsorbed cellulase during enzymatic conversion of alkaline peroxide oxidation-pretreated corn cob to sugar. Korean J. Chem. Eng. ISSN 1975-7220

Ayeni, .A. O. and Daramola, Michael Olawale and Sekoai, .Patrick T. and Adeeyo, O.A. and Garba, Musa Joel and Awosusi, A. A. (2018) Statistical modelling and optimization of alkaline peroxide oxidation pretreatment process on rice husk cellulosic biomass to enhance enzymatic convertibility and fermentation to ethanol. Cellulose, 25. pp. 2487-2504.

Ayeni, .A. O. and Samuel, Ifeanyi T. and Adekeye, B. Temitope and Agboola, Oluranti UNSPECIFIED

Ayeni, .A. O. and Samuel, Ifeanyi T. and Adekeye, B. Temitope and Agboola, Oluranti and Nwinyi, Obinna and Oladokun, Olagoke and Ayoola, A. A. and Elehinafe, F. Boluwaji (2022) Inactivation kinetics and thermodynamics assessments of Geobacillus stearothermophilus during thermal sterilization for products safety. South African Journal of Chemical Engineering, 42. pp. 223-228.

Ayinde, Raheem, Akeem and Bamigboye, Gideon (2013) Establishing Threshold Level for Gravel Inclusion in Concrete Production. Innovative Systems Design and Engineering, 4 (9). pp. 25-30. ISSN 2222-2871

Ayo, C. K. and Adeboye, A. B. and Gbadeyan, J.A. (2011) Application Of ICT TO Resource And Disaster Mamagement. Journal of “Sustainable Development and Environmental Protection, 1 (1). pp. 77-86.

Ayomide, B.Orhewere and Ajayi, O. O. and Banjo, SolomonO. and Ajayi, A. A. (2017) Data ontheno-loadperformanceanalysis of atomatopostharveststoragesystem. Data in Brief, 13. pp. 667-674.

Ayoola, A. A. and Adeeyo, O.A. and Ojewumi, M. E. and Ibiye, Bibi P. (2016) Oxidation Stability of Fatty Acid Methyl Ester under Three Different Conditions. Journal of Energy Technologies and Policy, 6 (2). pp. 6-11. ISSN 2224-3232 (Paper) 2225-0573 (Online)

Ayoola, A. A. and Adeniyi, Olalekan D. and Sanni, Samuel Eshorame and Osakwe, Kamsiyonna Ikenna and Jato, Jennifer Doom (2018) Investigating production parameters and impacts of potential emissions from soybean biodiesel stored under different conditions. Environ. Eng. Res, 23 (1). pp. 54-61. ISSN pISSN 1226-1025, eISSN 2005-968X

Ayoola, A. A. and Babalola, Rasheed and Ojewumi, M. E. and Fayomi, O. S. I (2018) Assessment of KOH and NaOH Catalysed Biodiesel from Melon Seed Oil. Materials Focus, 7. pp. 1-7.

Ayoola, A. A. and Durodola, B. M. and Fayomi, O. S. I and Agboola, Oluranti and Alagbe, Edith Egbimhanlu. and Olagoke, Oladokun and Nnabuko, D. (2022) Corrosion Inhibitive Performance of the Waste Orange Peels (Citrus Sinensis) on A36 Mild Steel in 1M HCl. Int. J. Electrochem. Sci, 17.

Ayoola, A. A. and Fayomi, O. S. I and Ogunkanmbi, S.O. (2018) Data on inhibitive performance of chloraphenicol drug on A315 mild steel in acidic medium. Data in Brief, 19. pp. 804-809.

Ayoola, A. A. and Fayomi, O. S. I and Popoola, A. P. I. (2018) Anti-Corrosion and High Temperature Thermal Treatment of SiO2 Crystal Induced on Zinc Electrolyte on Mild Steel. Materials Focus. pp. 1-3.

Ayoola, A. A. and Hymore, F. K. and Omonhinmin, Conrad A. and Babalola, P.O. and Fayomi, O. S. I and Olawole, C. Olukunle and Olawepo, A.V and Babalola, A (2020) Response surface methodology and artificial neural network analysis of crude palm kernel oil biodiesel production. Chemical Data Collections, 28.

Ayoola, A. A. and Hymore, F. K. and Ojewumi, M. E. and Uwoghiren, Osayomwanbo J. (2018) Effects of Sodium Hydroxide Concentration on Zeolite Y Synthesized from Elefun Kaolinite Clay in Nigeria. International Journal of Applied Engineering Research, 13 (3). p. 1536. ISSN 0973-4562

Ayoola, A. A. and Hymore, F. K. and Omodara, O. J. and Oyeniyi, Esther Adenike and Fayomi, O. S. I and Chisom, Ugochukwu C (2017) Effect of Crystallisation Time on the Synthesis of Zeolite Y from Elefun Kaolinite Clay. International Journal of Applied Engineering Research, 12 (21). pp. 10981-10988. ISSN 0973-4562

Ayoola, A. A. and Hymore, F. K. and Omodara, O. J. and Oyeniyi, Esther Adenike and Fayomi, O. S. I and Ugochukwu, C. Chisom (2017) Effect of Crystallisation Time on the Synthesis of Zeolite Y from Elefun Kaolinite Clay. International Journal of Applied Engineering Research, 12 (21). pp. 10981-10988. ISSN 0973-4562

Ayoola, A. A. and Hymore, F. K. and Omonhinmin, Conrad A. (2016) Optimization of Biodiesel Production from Selected Waste Oils Using Response Surface Methodology. Biotechnology. ISSN 1682-296X

Ayoola, A. A. and Hymore, F. K. and Omonhinmin, Conrad A. and Efeovbokhan, Vincent Enon and Ayeni, .A. O. and OLAFADEHAN, O. A. (2016) Impacts Analysis of Emissions From Biodiesel and Washing Water. INDIAN JouRNAL OF ENVIRONMENTAL PROTECTION, 36 (2). pp. 156-168. ISSN 0253 .7141

Ayoola, A. A. and Hymore, F. K. and Omonhinmin, Conrad A. and Olawole, C. Olukunle and Fayomi, O. S. I and Babatunde, Damilola Elizabeth and Fagbiele, Omololu Oluwatobi (2019) Analysis of waste groundnut oil biodiesel production using response surface methodology and artificial neural network. Chemical Data Collections, 22.

Ayoola, A. A. and Igho, E. Blessing and Fayomi, O. S. I (2018) Data on calcium oxide and cow bone catalysts used for soybean biodiesel production. Data in Brief, 18. pp. 512-517.

Ayoola, A. A. and Obanla, O. R. and Abatan, Olubunmi G. and Fayomi, O. S. I and AKANDE, I.G and Agboola, Oluranti and Ayeni, .A. O. and Oyekunle, D. T. UNSPECIFIED

Ayoola, A. A. and Oresegun, O. R. and Oladimeji, Temitayo E, and LAWAL, S. A (2016) TREATMENTS OF BIODIESEL WASHING WATER. International Journal of Management, Information Technology and Engineering, 4 (3). pp. 27-34. ISSN 2454-471X

Ayoola, Ayodeji Ayodele and Obanla, Oyinlola Rukayat and Abatan, Olubunmi G. and Fayomi, O. S. I and AKANDE, I.G and Agboola, Oluranti and Ayeni, .A. O. and Oyekunle, D. T. UNSPECIFIED

Ayuba, Emmanuel O. and Bolu, Christian and John, Temitope M. and Abioye, Abiodun A. (2018) Dataset showing Steel Cold Rolling Process Parameters for a 6-High Cold Rolling Mill in Nigeria. Data in Brief.

Azeta, Joseph and Okokpujie, Kennedy O. and Okokpujie, Imhade P. and Osemwegie, Omoruyi and Chibuzor, Alexander (2016) A Plan for Igniting Nigeria’s Industrial Revolution. International Journal of Scientific & Engineering Research, 7 (11). p. 489. ISSN 2229-5518

Azubuike, Ijeoma and Ikiensikimama, Sunday and Orodu, O. D. (2016) Gas Viscosity Measurement and Evaluation for High Pressure and High Temperature Gas Reservoirs. Gas Viscosity Measurement and Evaluation for High Pressure and High Temperature Gas Reservoirs, 5 (54). pp. 157-162. ISSN 2251-8843

Azubuike, Ijeoma Irene and Ikiensikimama, Sunday and Orodu, O. D. (2016) Natural Gas Compressibility Factor Measurement and Evaluation for High Pressure High Temperature Gas Reservoirs. International Journal of Scientific & Engineering Research, 7 (7). pp. 1173-1181. ISSN 2229-5518

Babajide, A. A and Adebowale, Oladepo and Fadairo, A. S. A. and Ako , C. T. and Ifechukwu, Michaels (2016) Effects of Temperature and Pressure on Shale Cuttings Dispersion in Water Base Mud WBM Using NACL, CACL2, KCL Salts as Primary Inhibiting Agents and Polymer XCD Xanthan Gum as secondary Inhibiting Agent. SPE-184310-MS. pp. 1-15.

Babalola, O. E. and Awoyera, P. O. and Le, D. -H. and Romero, L.M. Bendezú (2021) A review of residual strength properties of normal and high strength concrete exposed to elevated temperatures: Impact of materials modification on behaviour of concrete composite. Construction and Building Materials.

Babalola, Olatunde Daniel and Aduwo, B. E. and Oti, MarvelousObinna and Amusan, L. M. (2023) Determinants of Sustainable (Solar) Energy Efficiency in Research Institutes in Kaduna State, Nigeria. Journal of Architecture and Civil Engineering, 8 (4). pp. 59-69.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. (2017) Artificial Neural Network Prediction of Aluminium Metal Matrix Composite with Silicon Carbide Particles Developed Using Stir Casting Method. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 15 (6). pp. 151-158.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Kilanko, O. O and Oyedepo, Sunday Olayinka and Odunfa, K. M. (2017) Producing AA1170 Based Silicon Carbide Particulate Composite through Stir Casting Method. Asian Journal of Materials Chemistry, 2 (3). pp. 1-5.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Oyedepo, Sunday Olayinka and Kilanko, O. O and Adeyemi, Gideon Adewale (2018) Application of solar photovoltaic system to power air blower and mixing mechanism in a tilting furnace. World Review of Science, Technology and Sust. Development, X (Y, xxx). pp. 1-10.

Babalola, P.O. and Inegbenebor, A.O. and Bolu, Christian and John, Shella I. (2019) COMPARISON OF THE MECHANICAL CHARACTERISTICS OF ALUMINIUM SIC COMPOSITES CAST IN SAND AND METAL MOULDS. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2). pp. 1671-1681. ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Babalola, P.O. and lnegbenebor, A. O. and Bolu, Christian (2012) Design and construction of tilting furnace for producing aluminium matrix composites. Proc. ICCEM. 260- 271.

Babarinde, T.O. and Ohunakin, O.S. and Adelekan, D.S and Aasa, S. A. and Oyedepo, Sunday Olayinka (2015) EXPERIMENTAL STUDY OF LPG AND R134a REFRIGERANTS IN VAPOR COMPRESSION REFRIGERATION. International Journal of Energy for a Clean Environment, 16 (1-4). pp. 71-80. ISSN 2150-3621

Babatunde, Damilola Elizabeth and Anozie, Ambrose Nwora and Omoleye, James (2020) Artificial Neural Network and its Applications in the Energy Sector – An Overview. International Journal of Energy Economics and Policy, 10 (2). pp. 250-264. ISSN 2146-4553

Babatunde, Damilola Elizabeth and Babatunde, Olubayo Moses and Emezirinwune, Micheal Uzoamaka and Denwigwe, Iheanacho H. and Okharedia, Taiwo Emmanuel and Omodara, O. J. (2020) Feasibility analysis of an off-grid photovoltaic-battery energy system for a farm facility. International Journal of Electrical and Computer Engineering (IJECE), 10 (3). pp. 2874-2883. ISSN 2088-8708

Babatunde, Damilola Elizabeth and Denwigwe, Iheanacho H. and Babatunde, Olubayo Moses and Gbadamosi, Saheed L. and BABALOLA, IFEOLUWA P and Agboola, Oluranti (2020) Environmental and Societal Impact of Nanotechnology. IEEE ACESS, 8.

Babatunde, Damilola Elizabeth and Otusemade, G. O. and Efeovbokhan, Vincent Enon and Ojewumi, M. E. (2019) Chemical composition of steam and solvent crude oil extracts from Azadirachta indica leaves. Chemical Data Collections, 20.

Babatunde, Damilola Elizabeth and Otusemade, G. O. and Ojewumi, M. E. and Agboola, O.O. and Oyeniyi, Esther Adenike (2019) ANTIMICROBIAL ACTIVITY AND PHYTOCHEMICAL SCREENING OF NEEM LEAVES AND LEMON GRASS ESSENTIAL OIL EXTRACTS. International Journal of Mechanical Engineering and Technology (IJMET) , 10 (3). 882-889. ISSN 0976-6359

Babatunde, M.O. and AKINBULIRE, T. 0 and Oluseyi, Peter Olabisi and Emezirinwune, M.U. and Shomefun, Tobi (2017) Evaluating the Energy and Carbon (IV) Oxide (CO2) Reduction Resulting from Efficient Lighting at the University of Lagos, Nigeria. Journal of Engineering Research, 22 (2). pp. 63-72.

Babatunde, M.O. and AKINBULIRE, T. 0 and Oluseyi, Peter Olabisi and Emezirinwune, Micheal Uzoamaka (2017) Evaluating the Energy and Carbon (IV) Oxide (CO2) Reduction Resulting from Efficient Lighting at the University of Lagos, Nigeria. Journal of Engineering Research, 22 (2). pp. 63-72.

Babatunde, Olubayo Moses and Adedoja, Oluwaseye Samson and Babatunde, Damilola Elizabeth and Denwigwe, Iheanacho H. (2019) Off-grid hybrid renewable energy system for rural healthcare centers: A case study in Nigeria. MODELING AND ANALYS I S.

Babatunde, Olubayo Moses and Ayegbusi, Clement Olaniyi and Babatunde, Damilola Elizabeth and Oluseyi, Peter Olabisi and Somefun, Tobilola Emmanuel (2019) Electricity Supply in Nigeria: Cost Comparison between Grid Power Tariff and Fossil-Powered Generator. International Journal of Energy Economics and Policy, 10 (2). pp. 160-164. ISSN 2146-4553

Babatunde, Olubayo Moses and Denwigwe, Iheanacho H. and Adedoja, Oluwaseye Samson and Babatunde, Damilola Elizabeth and Gbadamosi, Saheed L. (2019) Harnessing Renewable Energy for Sustainable Agricultural Applications. International Journal of Energy Economics and Policy, 9 (5). 308-315. ISSN 2146-4553

Babatunde, Olubayo Moses and Denwigwe, Iheanacho H. and Babatunde, Damilola Elizabeth and Ayeni, .A. O. and Adedoja, Toyosi Beatrice and Adedoja, Oluwaseye Samson (2019) Techno-economic assessment of photovoltaicdiesel generator-battery energy system for base transceiver stations loads in Nigeria. Cogent Engineering, 6. pp. 1-19. ISSN 2331-1916

Babayomi, Oluleke O. and Olubayo, Babatunde and Denwigwe, Iheanacho H. and Somefun, Tobilola Emmanuel and Adedoja, Oluwaseye Samson and somefun, C.T. and Olukayode, Kevwe and ATTAH, AMARACHI RITA (2023) A review of renewable off-grid mini-grids in Sub-Saharan Africa. Frontiers in Energy Research. pp. 1-30.

Babayomi, Oluleke O. and Shomefun, Tobi and Zhang, Zhenbin (2020) Energy Efficiency of Sustainable Renewable Microgrids for Off-Grid Electrification. PES/IAS PowerAfrica.

Bahri, Hind and El Mlili, Nisrin and Akandec, Oluwatobi Noah and Kerkeb, Abdel-ilah and Madranea, Mourad (2021) Dataset of Moroccan nursing students’ intention to use and accept information and communication technologies and social media platforms for learning. Elsevier, 37 (107230).

Bamigboye, Gideon and Bassey, Daniel and Olukanni, D. O. and Ngene, Ben U. and Adegoke, Dunmininu and Odetoyan, Abimbola Oyebola and Kareem, M. A. and Enabulele, David O. and Nworgu, Austin T. (2021) Waste materials in highway applications: An overview on generation and utilization implications on sustainability. Journal of Cleaner Production.

Bamigboye, Gideon and Ede, A. N. and Umana, Uwanabasi Edet and Odewumi, Tajudeen and Olowu, O. A. (2016) Assessment of Strength Characteristics of Concrete Made from Locally Sourced Gravel Aggregate from South-South Nigeria. British Journal of Applied Science & Technology, 12 (5). pp. 1-10. ISSN 2231-0843

Bamigboye, Gideon and Enabulele, David O. and Odetoyan, Abimbola Oyebola and Kareem, M. A. and Nworgu, Austin T. and Bassey, Daniel (2021) Mechanical and durability assessment of concrete containing seashells: A review. Cogent Engineering, 8.

Bamigboye, Gideon and Ngene, Ben U. and Apata, Odera Efomo and Adeyemi, Gideon Adewale and Jolayemi, Kayode J. (2018) Data on acoustic behaviour of coconut fibre-reinforced concrete. Data in Brief, 21. pp. 1004-1007.

Bamigboye, Gideon and Nworgu, Austin T. and Odetoyan, Abimbola Oyebola and Kareem, M. A. and Enabulele, Onaiwu and Bassey, David E. (2021) Sustainable use of seashells as binder in concrete production: Prospect and challenges. Journal of Building Engineering, 34.

Bamigboye, Gideon and Okara, Odochi and Bassey, David E. and Jolayemi, Kayode J. and Ajimalofin, David (2020) The use of Senilia senilis seashells as a substitute for coarse aggregate in eco-friendly concrete. Journal of Building Engineering, 32.

Bamigboye, Gideon and Okechukwu, Uchechi E. and Olukanni, D. O. and Bassey, Daniel and Okorie, Uchechukwu E. and Adebesin, Joshua and Jolayemi, Kayode J. (2022) Effective Economic Combination of Waste Seashell and River Sand as Fine Aggregate in Green Concrete. Sustainability, 14.

Bamigboye, Gideon and Olaniyi, O. A. and Olukanni, D. O. and Ede, A. N. and Akinwumi, I. I. (2017) Diameter Inconsistency, Strength and Corrosion Characteristics of Locally-Produced and Imported Steel Reinforcing Bars in Ilorin, Nigeria. International Journal of Engineering Research in Africa, 29. pp. 90-97. ISSN 1663-4144

Bamigboye, Gideon and Olukanni, D. O. and Adedeji, Adeola A. and Jolayemi, Kayode J. (2017) Experimental Study on the Workability of Self-Compacting Granite and Unwashed Gravel Concrete. International Journal of Engineering Research in Africa, 31. pp. 69-76. ISSN 1663-4144

Bamigboye, Gideon and Olukanni, D. O. and Adedeji, Adeola A. and Ngene, Ben U. and Jolayemi, Kayode J. and Ajao, Adekunle M (2018) PHYSICAL AND MECHANICAL PROPERTIES OF CONCRETE MADE WITH LOCAL GRAVEL FOR SUSTAINABLE CONSTRUCTION: CASE STUDY OGUN AND OYO STATES, NIGERIA. International Journal of Civil Engineering and Technology (IJCIET), 9 (11). pp. 2978-2985.

Bamigboye, Gideon and Olukanni, D. O. and Adedeji, Adeola A. and Ofuyatan, Olatokunbo M. and Busari, A. A. and Tenebe, I.T. and Emenike, PraiseGod C and Oniemayin, Babatunde I. (2017) Assessment of Gravel Properties Sourced within Oyo North Senatorial District: Case Study of Ogbomoso. International Journal of Engineering Research in Africa Submitted: 2016-05-25, 28. pp. 42-52. ISSN 1663-4144

Bamigboye, Gideon and Tarverdi, Karnik and Adigun, Damola and Bassey, Daniel and Okorie, Uchechukwu Emenas and Adediran, J. (2022) An appraisal of the mechanical, microstructural, and thermal characteristics of concrete containing waste PET as coarse aggregate. Cleaner Waste Systems, 1.

Bamigboye, Gideon and Tarverdi, Karnik and Umoren, A. O. and Bassey, Daniel and Okorie, Uchechukwu Emenas and Adediran, J. (2021) Evaluation of eco-friendly concrete having waste PET as fine aggregates. Cleaner Materials, 2.

Bamigboye, Gideon and Tarverdi, Karnik and Wali, Esivi S. and Bassey, Bassey and Jolayemi, Kayode J. (2020) Effects of Dissimilar Curing Systems on the Strength and Durability of Recycled PET-Modified Concrete. Silicon.

Bassey, Daniel and Ngene, Ben U. and Akinwumi, I. I. and Akpan, V. E. and Bamigboye, Gideon (2020) Ballast Contamination Mechanisms: A Criterial Review of Characterisation and Performance Indicators. Infrastructures, 5 (94).

Bheel, Naraindas and Ali, Montasir Osman Ahmed Ali and Shafiq, Nasir and Almujibah, Hamad R. and Awoyera, P. O. and Benjeddou, Omrane and Shittu, Ahmed and Olalusi, Oladimeji B. (2023) Utilization of millet husk ash as a supplementary cementitious material in eco-friendly concrete: RSM modelling and optimization. Structures, 49.

Bheel, Naraindas and Awoyera, P. O. and Tafsirojjaman, T. and Sor, Nadhim Hamah (2021) Synergic effect of metakaolin and groundnut shell ash on the behavior of fly ash-based self-compacting geopolymer concrete. Construction and Building Materials.

Bheel, Naraindas and Kennedy, Charles and Awoyera, P. O. and Sohu, Samiullah and Abbasi, Suhail Ahmed (2022) Comparative Study on Mechanical Properties of Concrete Blended with Costus englerianus Bagasse Ash and Bagasse Fibre as Partial Replacement for Lime and Cement. Advances in Civil Engineering.

Biodun, Biola Mathew and Fayomi, O. S. I and Okeniyi, Joshua Olusegun (2022) Effect of Biowaste Materials on the Physical Properties of Blended Fuel for Industrial Application. Key Engineering Materials, 936.

Biodun, Biola Mathew and Fayomi, Ojo Sunday Isaac and Okeniyi, O. Joshua (2022) Comparative Analysis and Performance Characteristics of Bio-Additives Induced Fuel Blend. Key Engineering Materials. pp. 117-124.

Bolu, Christian (2013) Modeling Maintenance Productivity Measurement of Engineering Production Systems: Discrete Event Simulation Approach. International Journal of Mechanical & Mechatronics Engineering, 13 (05).

Bolu, Christian and Azeta, Joseph and Mallo, Stephen J. and Ismail, S. O and Dada, J.A and Aderounmu, Sola and Ismail, Abubakar and Oyetunji, Elkannah (2021) Engineering Students’ Virtual Learning Challenges during COVID-19 Pandemic Lockdown: A Case Study. IEEE Xplore Digital Library. ISSN 2165-4301

Bolujo, E. O. and Fadairo, A. S. A. and Ako , C. T. and Orodu, O. D. and Omodara, O. J. and Emetere, Moses (2017) A New Model for Predicting Liquid Loading in Multiphase Gas Wells. International Journal of Applied Engineering Research, 12 (14). pp. 4578-4586. ISSN 0973-4562

Busari, A. A. and Akinmusuru, J. O. and Dahunsi, Bamidele (2017) Review of Sustainability in Self Compacting Concrete: the use of waste and mineral additives as supplementary cementitious material and aggregate. Portugaliae Electrochimica Acta. (In Press)

Busari, A. A. and Akinmusuru, J. O. and Dahunsi, Bamidele and Ofuyatan, Olatokunbo M. and Ngene, Ben U. (2017) Pavement construction using self-compacting concrete: Mechanical properties. International Journal of Advanced and Applied Sciences, 4 (8). pp. 50-55.

Busari, A. A. and Akinwumi, I. I. and Awoyera, P. O. and Olofinnade, O. M. and Tenebe, I.T. and Nwanchukwu, J.C. (2018) Stabilization Effect of Aluminum Dross on Tropical Lateritic Soil. International Journal of Engineering Research in Africa, 39. pp. 86-96.

Busari, A. A. and Joshua, Opeyemi and Oyedepo, Joseph and Olawuyi, Oluwole Ayodeji and Daramola, Kofoworola (2019) UNIVERSITY COMMUNITY COMMUTING TRIP PATTERNS: TEMPORAL ASSESSMENT. Sustainable Development and Planning, 217. pp. 735-744. ISSN 1743-354

Busari, A. A. and Loto, R. T. and Dahunsi, Bamidele Ibukunolu and Omolewa, Joshua (2022) Lateritic Soil Improvement Using Lime and MOFIC. International Journal of Pavement Research and Technology.

Busari, A. A. and Oluwajana, Seun Daniel and Ede, A. N. and Joshua, Opeyemi and Adeyanju, EMMANUEL (2019) SPATIO-TEMPORAL COMMUTING PATTERN IN THE UNIVERSITY ENVIRONMENT: A GENDER PERSPECTIVE. WIT Transactions on Ecology and the Environment. p. 745. ISSN 1743-3541

Busari, A. A. and Osuolale, O. and Omole, D. O. and Ojo, A. A. and Jayeola, B. (2015) Travel Behaviour Of University Enviroment: Inter-Relationship Between Trip Distance And Travel Mode Choice In South-Western Nigeria. International Journal of Applied Engineering Research, 10 (21). pp. 42362-42366. ISSN 0973-4562

Busari, A. A. and Oyedepo, Joseph and Ofuyatan, Olatokunbo M. and NURAIN, Suleiman and AJAYI, Samuel and Oti, Miracle N. (2017) Sustainability in Road Construction: Using Bamboo Straw Ash to Improve the Index Properties of Lateritic Soil. European Journal of Sustainable Development.. (In Press)

Covenant University, Town and Gown (2018) Town and Gown Seminar Series - Petroleum Engineering. Covenant University. (Unpublished)

Dada, J. O. and Bamigboye, Gideon (2021) Diagnosing the Causes of Quackery in Quantity Surveying Practice in Lagos State, Nigeria. JOURNAL OF CONSTRUCTION BUSINESS AND MANAGEMENT, 5 (1).

Dahunsi, S. O. and Oranusi, S. U. and Efeovbokhan, Vincent Enon (2017) Cleaner energy for cleaner production: Modeling and optimization of biogas generation from Carica papayas (Pawpaw) fruit peels. Journal of Cleaner Production, 156. pp. 19-29.

Dahunsi, S. O. and Oranusi, S. U. and Efeovbokhan, Vincent Enon (2017) Optimization of pretreatment, process performance, mass and energy balance in the anaerobic digestion of Arachis hypogaea (Peanut) hull. Energy Conversion and Management. pp. 260-275.

Dahunsi, S. O. and Oranusi, S. U. and Efeovbokhan, Vincent Enon and Olayanju, Adeniyi and Zahedi, Soraya and Ojediran, John O. and Izebere, John O. and Aladegboye, O.J. (2018) Anaerobic conversion of Chromolaena odorata (Siam weed) to biogas. Energy Reports, 4. pp. 691-700.

Dahunsi, S. O. and Oranusi, S. U. and Efeovbokhan, Vincent Enon and Zahedi, Soraya and Ojediran, John O. and Olayanju, Adeniyi and Oluyori, Abimbola P. and Adekanye, Timothy A. and Izebere, John O. and Enyinnaya, Munachi (2018) Biochemical conversion of fruit rind of Telfairia occidentalis (fluted pumpkin) and poultry manure. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. ISSN 1556-7230

Dahunsi, S. O. and Oranusi, S. U. and Owolabi, Joshua B. and Efeovbokhan, Vincent Enon (2016) Mesophilic anaerobic co-digestion of poultry dropping and Carica papaya peels: Modelling and process parameter optimization study. Bioresource Technology. pp. 587-600.

Dahunsi, S. O. and Oranusi, S. U. and Owolabi, Joshua B. and Efeovbokhan, Vincent Enon (2017) Synergy of Siam weed (Chromolaena odorata) and poultry manure for energy generation: Effects of pretreatment methods, modeling and process optimization. Bioresource Technology. pp. 409-417.

Daniel-Mkpume, C. C. and Ugochukwu, C. Chisom and Okonkwo, Ebenezer and Fayomi, O. S. I and Obiorah, S. M. (2019) Effect of Luffa cylindrica fiber and particulate on the mechanical properties of epoxy. The International Journal of Advanced Manufacturing Technology, 102. pp. 3439-3444.

Daniyan, A. A. and Umoru, L. E. and Popoola, A. P. I. and Fayomi, O. S. I (2017) Comparative studies of microstructural, tribological and corrosion properties of Zn-TiO2 and Zn-TiO2-WO3 nano-composite coatings. Results in Physics, 7. pp. 3222-3229.

Daramola, Olawande and Adigun , M. O. and Olugbara, O. O. (2008) A Product Line Architecture for Evolving Intelligent Component Services in Tourism Information Systems. Information and Communication Technologies in Tourism. 117-129.

Daramola, S. A. and Abdulkareem, Ademola and Adinfona, K. Joshua (2014) Efficient Item Image Retrieval System. International Journal of Soft Computing and Engineering, 4 (2). pp. 109-113. ISSN 2231-2307

Daramola, S. A. and Adefunminiyi, Morakinyo A (2016) TEXT CONTENT DEPENDENT WRITER IDENTIFICATION. International Journal of Research in Engineering and Technology, 5 (2). pp. 45-49. ISSN 2319-1163

Daramola, S. A. and Ademola, A. (2016) Vehicle Classification Algorithm using Size and Shape. International Journal of Soft Computing and Engineering, 6 (1). pp. 78-81. ISSN 2231-2307

Daramola, S. A. and Ajayi, Olujimi and Odu, Tiwalade (2014) Robust Palm-Print Feature for Human Identification. International Journal of Engineering and Advanced Technology, 3 (4). pp. 152-155. ISSN 2249 – 8958

Daramola, S. A. and Ibiyemi, SAMUEL (2010) Novel Feature Extraction Technique For Off-Line Signature Verification System. International Journal of Engineering Science and Technology, 2 (7). pp. 3137-3143. ISSN 0975-5462

Daramola, S. A. and Ibiyemi, T. S (2010) Efficient on-line signature verification system. International Journal of Engineering & Technology IJET-IJENS, 10 (4). pp. 48-52.

Daramola, S. A. and Ibiyemi, T. S (2010) Offline Signature Recognition using Hidden Markov Model (HMM). International Journal of Computer Applications, 10 (2). pp. 17-22. ISSN 0975 – 8887

Daramola, S. A. and Ibiyemi, T. S (2010) Person Identification System using Static-dyamic Signatures Fusion. (IJCSIS) International Journal of Computer Science and Information Security,, 8 (6). pp. 88-92. ISSN 1947-5500

Daramola, S. A. and Nwankwo, C .N (2011) Algorithm for Fingerprint Verification System. Journal of Emerging Trends in Engineering and Applied Sciences, 2 (2). pp. 355-359. ISSN 2141-7016

Daramola, S. A. and Odeghe, O. Sandra (2012) Efficient Face Recognition System using Artificial Neural Network. International Journal of Computer Applications, 41 (21). pp. 13-15. ISSN 0975 – 8887

Daramola, S. A. and Odu, Tiwalade and Ajayi, Olujimi (2014) Effective Face Feature For Human Identification. International Journal of Research in Engineering and Technology, 3 (4). pp. 117-120. ISSN 2319-1163 | p: 2321-7308

Daramola, S. A. and Olujimi, Ajayi and Morakinyo, A. (2016) Hand Vein Based Personal Identification System. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, 5 (2). pp. 799-804. ISSN 2277-9655

Daramola, S. A. and Omololu, Olumide (2016) Fish Classification Algorithm using Single Value Decomposition. International Journal of Innovative Research in Science, Engineering and Technology, 5 (2). pp. 1621-1626. ISSN (Online): 2319-8753 (Print) : 2347-6710

Dare-Abel, O.A. (2014) Task-Technology Fit of CAD Deployment in Architectural Firms in Nigeria. International Journal of Engineering Research, 3 (11). pp. 697-699. ISSN ISSN:2319-6890)(online), 2347-5013(print)

Dare-Abel, O.A. and Ayo, C. K. and Omoregbe, N. A. (2014) ACCEPTANCE OF COMPUTER SUPPORTED COLLABORATIVE WORK (CSCW) IN ARCHITECTURAL FIRMS IN NIGERIA. The International Journal of Engineering and Science (IJES), 3 (7). pp. 19-24. ISSN 2319-1813

Dare-Abel, O.A. and Igwe, J.M. and Ayo, C. K. (2014) Proficiency And Capacity Building Of Human Capital in Architectural Firms in Nigeria. International Journal of Architecture and Design , 25 (2). pp. 1133-1139.

Dare-Abel, O.A. and Uwakonye, O. (2014) Assessment of Digital Architectural Design Education at Covenant University Ota, Nigeria. Scottish Journal of Arts, Social Sciences and Scientific Studies, 18 (1). pp. 24-31. ISSN 2047-1278

Dauda, T. O and Raji, A. O and Ilori, T. A and Adejumo,, A. O. and Kilanko, O. O (2017) EVALUATION OF MAINTENANCE CULTURE OF SOME AGRICULTURAL PROCESSING MACHINE IN OYO STATE, NIGERIA. American Journal of Agricultural Science, Engineering and Technology, 1 (3). pp. 43-52. ISSN 2158-8104 (Online), 2164-0920

David, Victor and Iroanyanwu, Chinazom and Atane, Bilikisu Suleiman and Loto, R. T. (2022) Numerical analysis of the inhibition effect of Commiphora myrrha and Cymbopogon nardus plant extracts on low carbon steel corrosion in simulated industrial environment. materialstoday. (In Press)

Denwigwe, Iheanacho H. and Babatunde, Olubayo Moses and Babatunde, Damilola Elizabeth and Akintunde, Temitope J. and AKINBULIRE, T. 0 (2019) A Technical Review on Methods and Tools for Evaluation of Energy Footprints, Impact on Buildings and Environment. Springer Nature.

Diaso, Eseoghene R and Enaworu, E. and Seteyeobot, Ifeanyi and Onuh, C.Y (2018) RESERVOIR SIMULATION AND DECLINE CURVE ANALYSIS: A CASE STUDY OF "DER" FIELD, NIGER DELTA BASIN. Petroleum & Coal, 60 (5). pp. 933-942. ISSN 1337-7027

Dirisu, Gabriel B. and Okonkwo , Ugochukwu C. and Okokpujie, Imhade P. and Fayomi, O. S. I (2019) Comparative Analysis of the Effectiveness of Reverse Osmosis and Ultraviolet Radiation of Water Treatment. Journal of Ecological Engineering, 20 (1). pp. 61-75.

Dirisu, J. O. and Adelekan, D.S and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Akinlabi, Esther T. and Joseph, O. O and Olayemi, Olalekan Adebayo and Okokpujie, Imhade P. (2022) Effect of Oil Bean Stalk Filler on the Thermo-Mechanical Properties of Developed Aluminium Dross Composites for Building Ceilings. Journal of The Institution of Engineers.

Dirisu, J. O. and Joseph, O. O and Babalola, P.O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Oluwasegun, K.M and Nduka, Udoye and Ajayi, O. O. and Ajibero, Michael (2022) Utilization of Waste Materials for Eco-Friendly Building Ceilings: An Overview. Key Engineering Materials. pp. 285-295.

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Joseph, O. O and Akinlabi, Esther T. and Babalola, P.O. and Udoye, Nduka Ekene and Ajayi, O. O. and Aworinde, Abraham K. and Banjo, SolomonO. and Oluwasegun, K.M (2022) Thermal-emission assessment of building ceilings from agro-industrial wastes. Fuel Communications, 10.

Dirisu, J. O. and Asere, A.A. and Oyekunle, J.A and Adewole, B.Z and Ajayi , Oluseyi O. and Afolalu, Sunday A. and Joseph, O. O and Abioye, Abiodun A. (2017) Comparison of the Elemental Structure and Emission Characteristics of Selected PVC and Non PVC Ceiling Materials Available in Nigerian Markets. International Journal of Applied Engineering Research, 12 (23). pp. 13755-13758. ISSN 0973-4562

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Okokpujie, Imhade P. and Asere, A.A. and Oyekunle, J.A and Afolalu, Sunday A. and Abioye, Abiodun A. (2018) Effects of Emission Characteristics on Elemental Composition of Selected PVC Ceiling Materials. Materials Focus, 7. pp. 1-7.

Dirisu, Joy Favour and Asere, A.A. and Oyekunle, J.A and Ajayi, O. O. and Afolalu, Sunday A. and Joseph, O. O and Abioye, Abiodun A. (2017) Comparison of the Elemental Structure and Emission Characteristics of Selected PVC and Non PVC Ceiling Materials Available in Nigerian Markets. International Journal of Applied Engineering Research, 12 (23). pp. 14755-14758. ISSN 0973-4562

Dirisu, Joy Favour and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Okokpujie, Imhade P. and Asere, A.A. and Oyekunle, J.A and Afolalu, Sunday A. and Abioye, Abiodun A. (2018) Effects of Emission Characteristics on Elemental Composition of Selected PVC Ceiling Materials. Materials Focus, 7. pp. 1-7.

Dunmade, I.S. and Onawumi, A.S. and Ajayi, O. O. (2016) An Approach to Lifecycle Design and Sustainable Management of Nigerian Water Infrastructure. Sustainability in Energy and Buildings: Research Advances, 5 (1). pp. 11-20. ISSN 2054-3743

Durodola, B. M. and OLUGBUYIRO, J.A.O and Moshood, S.A. and Fayomi, O. S. I and Popoola, A. P. I. (2011) Study of Influence of Zinc Plated Mild Steel Deterioration in Seawater Environment. International Journal of ELECTROCHEMICAL SCIENCE, 6. 5605 - 5616.

Durodola, O. D. and Ayedun, C. A. and Akinjare, Omolade and Oloke, C. Olayinka and Oluwunmi, Adedamola O (2018) HOTEL EFFECTIVENESS INDEX (HEI)DEVELOPMENT FOR BOLSTERING HOTEL GRADING AND CLASSIFICATION IN LAGOS NIGERIA. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 1126-1134. ISSN 0976-6359

Durodola, O. D. and Ayedun, C. A. and Oluwunmi, Adedamola O and Oloke, C. Olayinka (2016) A Heuristic Method of Establishing Operational Effectiveness of Hotel Facilities in South-Western Nigeria. Covenant Journal in Research & Built Environment (CJRBE, 4 (2). pp. 71-86.

Durotoye, Taiwo Omowunmi and Akinmusuru, J. O. and Ogbiye, S. A. and Bamigboye, Gideon (2016) Effect of Common Salt on the Engineering Properties of Expansive Soil. International Journal of Engineering and Technology, 6 (7). pp. 233-241. ISSN 2049-3444

Ede, A. N. and Agbede, Joshua Olaoluwa (2015) Use of Coconut Husk Fiber for Improved Compressive and Flexural Strength of Con-crete. International Journal of Scientific & Engineering Research, 6 (2). pp. 968-974. ISSN 2229-5518

Ede, A. N. and Bamigboye, Gideon and Olofinnade, O. M. and Shittu, K.K. (2016) Influence of Portland Cement Brands and Aggregates Sizes on the Compressive Strength of Normal Concrete. Scientific.Net . pp. 72-82.

Ede, A. N. and Ngene, Ben U. and Bamigboye, Gideon (2015) Vibration-Based Structural Health Monitoring: Theoretical Foundations and Experimental Validation on Reinforced Concrete Beams. ANALELE UNIVERSITĂŢII “EFTIMIE MURGU” REŞIŢA, XXII, (2). ISSN 1453 - 7397

Ede, A. N. and Okundaye, Joshua Omoruyi (2014) Appraisal of Timber as Structural Members for Residential Buildings in Nigeria. International Journal of Engineering & Technology IJET-IJENS, 14 (1). pp. 108-112.

Edeghe, M. B and Babalola, P.O. (2018) 200 Watts Portable Solar Generator for a Typical Barbing Salon. IOP Conf. Series: Materials Science and Engineering.

Edeki, S.O. and Ogundile, O. P. and Osoba, B. and Adeyemi, Gideon Adewale and Egara, F. O. and Ejoh, Akpoyovware S. (2018) Coupled FCT-HP for Analytical Solutions of the Generalized Timefractional Newell-Whitehead-Segel Equation. WSEAS TRANSACTIONS on SYSTEMS and CONTROL, 13. pp. 266-274. ISSN 2224-2856

Edem, Inyeneobong Ekoi and Oke, Sunday Ayoola and Adebiyi, K. A. (2017) A novel grey–fuzzy–Markov and pattern recognition model for industrial accident forecasting. J Ind Eng Int.

Edemirukaye, Ukeh Orodje and Amaize, Peter and Uzairue, Stanley Idiake (2018) Implementation of an RF based wireless automated energy metering and billing system. Cogent Engineering, 5. pp. 1-15.

Edo, Samson and Okodua, Henry and Odebiyi, John (2019) Internet Adoption and Financial Development in Sub-Saharan Africa: Evidence from Nigeria and Kenya. African development review Revue, 31 (1). pp. 144-160.

Efeovbokhan, Vincent Enon and Egwari, L. O. and Alagbe, Edith Egbimhanlu. and Adeyemi, James T. and Taiwo, O. S. (2019) Production of Bioethanol from Hybrid Cassava Pulp and Peel using Microbial and Acid Hydrolysis. Peer-Reviewed Article, 14 (2). pp. 2596-2609.

Efeovbokhan, Vincent Enon and Olayemi, K. M. and Anawe, Paul Apeye Lucky and Abatan, Olubunmi G. (2015) Optimization of Phenolic Based De-Emulsifiers. Journal of Applied Sciences, 15 (6). pp. 862-873. ISSN 1812-5654

Efeovbokhan, Vincent Enon and Omoleye, James and Kalu, Egwu E. (2016) Extraction and Use of Potassium Hydroxide from Ripe Plantain Peels Ash for Biodiesel Production. Journal of Biobased Materials and Bioenergy, 10. pp. 1-9.

Efeovbokhan, Vincent Enon and Omoleye, James and Kalu, Eric E. and Udonne, Joseph Denis (2017) Kinetics of Base Catalysed Trans-Esterification of Jatropha Oil using Potassium Hydroxide Extract from Ripe Plantain Peels. International Journal of Applied Engineering Research, 12 (14). pp. 4539-4548. ISSN 0973-4562

Efeovbokhan, Vincent Enon and Udonne, Joseph Denis and Ayoola, A. A. and Shogbamu, Oluwadara Temitayo and Babalola, Rasheed (2017) OriginalA study of the effects of phenolic de-emulsifier solutions in xylene on thede-emulsification of a Nigerian crude oil emulsion. Journal of Applied Research and Technology, 15. pp. 110-121.

Efeovbokhan, Vincent Enon and Udonne, Joseph Denis and Ayoola, A. A. and Shogbamu, Oluwadara Temitayo and Babalola, Rasheed (2017) A study of the effects of phenolic de-emulsifier solutions in xylene on the de-emulsification of a Nigerian crude oil emulsion. Journal of Applied Research and Technology, 15. pp. 110-121.

Efeovbokhan, Vincent Enon and Udonne, Joseph Denis and Babatunde, Damilola Elizabeth and Sanni, Samuel Eshorame (2017) The Effect of Column Height, Packing Materials and Azeotrope Separation on the Purity of Ethanol Sourced from Ogogoro (Local Gin). Research Jourml of Applied Sciences, 12 (2). pp. 97-103. ISSN 1815-932X

Efeovbokhan, Vincent Enon and Udonne, Joseph Denis and Oladimeji, Temitayo E, and Nwokorobia, Chinoso and Anawe, Paul Apeye Lucky (2017) Formulation, Compounding And Assessment of De-Emulsifiers For The De-Emulsification Of Nigerian Crude Oil Emulsion. Petroleum & Coal, 59 (3). pp. 367-376. ISSN 1337-7027

Ehinmowo, A. B. (2016) Stability analysis of slug flow control. SYSTEMS SCIENCE & CONTROL ENGINEERING: AN OPEN ACCESS JOURNAL, 4. pp. 183-191. ISSN Taylor&Francis

Ehinmowo, A. B. and Aliyu, Aliyu M. and Alagbe, Solomon O. and Adedipe, Oyewole and Olumi, Olufunke (2015) Offshore Topside Rotating Packed Bed as Process Intensified Alternative for Natural Gas Sweetening and Dehydration. American Chemical Science Journal, 8 (4). pp. 1-12. ISSN 2249-0205

Ehinmowo, A. B. and Ogunbiyi, Ajibola T and Onuh, C.Y and Orodu, O. D. and Denloye, Adetokunbo O (2016) Topside Pipeline Design for Slug Attenuation and Increased Oil Production. International Journal of Applied Engineering Research, 11 (22). pp. 10782-10793. ISSN 0973-4562

Ehinmowo, A. B. and Ogunbiyi, Ajibola T and Orodu, O. D. and Aribike, D S and Denloye, Adetokunbo O (2016) Experimental Investigation of Hydrodynamic Slug Flow in Pipeline-Riser Systems. International Journal of Applied Engineering Research, 11 (22). 10794-10799 . ISSN 0973-4562

Ejekwu, O. and Ayeni, .A. O. and Sadare, O. O. and Daramola, Michael Olawale (2021) Development of non-derivatizing hydrate salt pre-treatment solvent for pre-treatment and fractionation of corn cob. Cogent Engineering. ISSN 4: 1376488

Ekechukwu, Gerald Kelechi and Falode, O. and Orodu, O. D. (2020) Improved Method for the Estimation of Minimum Miscibility Pressure for Pure and Impure CO2–Crude Oil Systems Using Gaussian Process Machine Learning Approach. J. Energy Resour. Technol, 142 (12).

Ekeh, J.C. and Wara, S.T. and Orovwode, H. E. (2007) Management of Existing Capacity of Electric Power with Energy Saving Devices. Advanced Materials Research, 18 (19). pp. 117-124.

Elehinafe, F. Boluwaji and Ezekiel, Somina N. and Okedere, O. B. and Odunlami, Olayemi O. (2022) Cement industry – Associated emissions, environmental issues and measures for the control of the emissions. Mechanical Engineering for Society and Industry, 2 (1). pp. 17-25.

Elehinafe, F. Boluwaji and Hassan, Yebtemiya J. and Ebong-Bassey, Queen E. and Adesanmi, Adewole J. (2022) A Review on the Disposal Methods with Intrinsic Environmental and Economic Impacts of Scrap Tyres in Nigeria. Automotive Experiences, 5 (2). pp. 103-110. ISSN p-ISSN: 2615-6202 e-ISSN: 2615-6636

Elehinafe, F. Boluwaji and Ibukun, Feyisayo David and Lasebikan, Oluseye Ladipo and Adisa, Hassan A. (2023) A review on indoor air pollution from lightning sources in developing countries—The pollutants, the prevention and the latest technologies for control. Applied Chemical Engineering, 6 (2).

Elehinafe, F. Boluwaji and Nwizu, Chizitelu Ifunanya and Odunlami, Olayemi B. and Ibukun, Feyisayo David (2022) Natural Gas Flaring in Nigeria, its Effects and Potential Alternatives – A Review. Journal of Ecological Engineering, 23 (8). pp. 141-151. ISSN 2299–8993

Elehinafe, F. Boluwaji and Okedere, O. B. (2023) Fuel-Briquetting for Sustainable Development in Developing Countries-A Review. Advances in Environmental and Engineering Research, 4 (3). pp. 1-13.

Elehinafe, F. Boluwaji and Okedere, O. B. and Adesanmi, Adewole J. and Jimoh, Eniola Mistura (2022) Assessment of Indoor Levels of Carbon Monoxide Emission from Smoldering Mosquito Coils Used in Nigeria. Environmental Health Insights, 16. pp. 1-6.

Elehinafe, F. Boluwaji and Okedere, O. B. and Ayeni, .A. O. and Ajewole, Titus Oluwasuji (2022) Hazardous Organic Pollutants from Open Burning of Municipal Wastes in Southwest Nigeria. Journal of Ecological Engineering. (In Press)

Elehinafe, F. Boluwaji and Okedere, O. B. and Mamudu, Angela Onose and Emetere, Moses (2021) Energy Status, Energy Mix and Renewable Energy Potentials of Nigeria. Energy and Environment Research, 11 (1). pp. 50-64. ISSN ISSN 1927-0569 E-ISSN 1927-0577

Elehinafe, F. Boluwaji and Okedere, O. B. and Oladimeji, Temitayo E, (2022) Investigation of Some Gaseous and Trace Metal Emissions With Their Emission Factors From Various Brands of Mosquito Coils Used in Nigeria. Environmental Health Insights, 16. pp. 1-6.

Elehinafe, Francis and Agboola, Oluranti and Vershima, Ashiekaa D. and Bamigboye, Gideon (2022) Insights on the advanced separation processes in water pollution analyses and wastewater treatment – A review. South African Journal of Chemical Engineering, 42. pp. 188-200.

Elemile, O.O. and Raphael, Davids Olorungbon and Omole, D. O. and Oloruntoba, Elizabeth Omoladun and Ajayi, Elijah Oluwasegun and Ohwavborua, Nyore Adams (2019) Assessment of the impact of abattoir effluent on the quality of groundwater in a residential area of Omu-Aran, Nigeria. Environmental Sciences Europe, 31.

Elendu, Oyidia and Ojewumi, M. E. and Yeboah, Yaw D. and Kalu, Egwu E. (2015) Use of a Mixed Formaldehyde and Sodium Hypophosphite Reducing Agent Bath in the Electroless Synthesis of Cu-Ni-Mo-P Electro-catalyst Active for Glycerol Oxidation. International Journal of ELECTROCHEMICAL SCIENCE, 10. 10792 - 10805.

Emenike, PraiseGod C and Tenebe, I.T. and Ogarekpe, Nkpa and Omole, D. O. and Nnaji, Chidoze (2023) Probabilistic risk assessment and spatial distribution of potentially toxic elements in groundwater sources in Southwestern Nigeria. Scientific Reports volume 9, Article number: 15920 (2019) Cite this article, 9. pp. 1-5. ISSN : 15920 (2019)

Emetere, Moses and Adeyemi, Gideon Adewale (2018) Dataset on aerosol loading and deposition over Nouakchott-Mauritania. Data in Brief, 19. pp. 2291-2296.

Emetere, Moses and Sanni, Samuel Eshorame and Abodurina, J.T. and Okoro, Emeka Emmanuel and Atayero, A. A. and Akinsiku, A.A. (2019) Structural investigation of La2SrDyCu2Oy complexities. Materials Chemistry and Physics. pp. 482-488.

Emetere, Moses and Sanni, Samuel Eshorame and Akinwumi, S. A. (2017) Theoretical Study of Aerosols Loading and Retention Over Bolgatanga, Ghana. Air, Soil and Water Research , 10. pp. 1-8.

Emetere, Moses and Sanni, Samuel Eshorame and Dauda, A. O. and Akinsiku, A.A. and Osunlola, O. I. and Adejumo, A. D. Operational trends of a mini parabolic solar collector for agricultural purposes in a non-active solar environment. Journal of Computational And Applied Research in Mechanical Engineering, 10 (1). pp. 201-210.

Emetere, Moses and Uno, U. E. and Onyechekwa, Lawrence and Sanni, Samuel Eshorame (2016) Improving the Transmitting Loop Antenna: An Applied Model to Satellite Technology. Internation Journal of Multimedia and Ubiguitous Engineering, 11 (8). pp. 45-52. ISSN 1976-0080

Emetere, Moses and Uno, U. E. and Onyechekwa, Lawrence and Sanni, Samuel Eshorame (2016) Mathematical modelling; bioremediation; crude oil; batch process; derived model. International Journal of Multimedia and Ubiquitous Engineering, 11 (8). pp. 45-52.

Enabulele, David O. and Bamigboye, Gideon and Solomon, Moses M. and Durodola, B. M. (2022) Exploration of the Corrosion Inhibition Potential of Cashew Nutshell on Thermo-Mechanically Treated Steel in Seawater. Arabian Journal for Science and Engineering.

Enaworu, A and Adewale, A and Enaworu, E. and Seteyeobot, Ifeanyi (2017) Modern Effective Cementing Practices: A case study of well “A” in the Niger Delta. Petroleum & Coal, 59 (3). pp. 389-396. ISSN 1337-7027

Enaworu, E. and Ajana, Larry O. and Orodu, O. D. (2016) PERMEABILITY PREDICTION IN WELLS USING FLOW ZONE INDICATOR (FZI). Petroleum and Coal, 58 (6). pp. 640-645. ISSN 1337-7027

Enesi, Salawu Y and Ajayi, O. O. and Inegbenebor, A.O. and Fayomi, O. S. I and Popoola, A. P. I. and Uyor, U. O. (2019) Corrosion Behavior of Mild Steel in Different Concentrations of Ethanol Beverages. Journal of Bio- and Tribo-Corrosion, 6 (2).

Enesi, Salawu Y and Okokpujie, Imhade P. and Afolalu, Sunday A. and Ajayi, O. O. and Azeta, Joseph (2018) INVESTIGATION OF PRODUCTION OUTPUT FOR IMPROVEMENT. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 915-922. ISSN 2249-8001

FULANI, OMOYENI ADEREWA (2017) GENDER ISSUES IN THE LEARNING OF ARCHITECTURE IN PRIVATE UNIVERSITIES IN OGUN STATE, NIGERIA. Thesis. pp. 1-175. (Unpublished)

Fadairo, A. S. A. (2018) Modelling scale saturation around the wellbore for non-Darcy radial flow system. Egyptian Journal of Petroleum. pp. 583-587.

Fadairo, A. S. A. and Adekomaya, O. and Falode, O. Reservoir characterization · Water saturation · Bound water saturation · Bound water resistivity · Volume of shale · Core analysis. SPE/IADC. pp. 1-9.

Fadairo, A. S. A. and Falode, O. (2009) Predicting tool for sulphate scale build-up around the wellbore in oilfield. International Journal of Oil, Gas and Coal Technology, 2 (4). ISSN 1753-3309 Online ISSN: 1753-3317

Fadairo, A. S. A. and Omodara, O. J. and Ako , C. T. (2017) An improved model for predicting elemental sulphur saturation in sour gas reservoir with incidence of reservoir compaction. Geosystem Engineering, 21 (1). pp. 53-60.

Fadairo, A. S. A. and Omole, O. and Falode, O. (2009) A Modified Model for Predicting Permeability Damage due to Oilfield Scale Deposition. Petroleum Science and Technology, 31: , 27 (13). pp. 1454-1465. ISSN 109 1-6466 print/1532-2459 online

Fadairo, Adesina and Ogunkunle, Temitope and Abraham, V. D. and Oladepo, Adebowale and Lawal, Babajide (2018) Evaluation of the Effects of Nanofluid on the Lubricity of Oil-based Mud. Current Journal of Applied Science and Technology, 28 (6). pp. 1-9. ISSN 2457-1024

Fagbenle, Olabosipo I. and Ogunde, Ayodeji and Owolabi, J. D (2011) Factors Affecting the Performance of Labour in Nigerian Construction Sites. Mediterranean Journal of Social Sciences, 2 (2). pp. 251-257. ISSN 2039 - 2117

Fagbenle, R. O. and Katende, J. and Ajayi, O. O. and Okeniyi, Joshua Olusegun (2011) Assessment of wind energy potential of two sites in North-East, Nigeria. Renewable Energy, 36. pp. 1277-1283.

Fajobi, M. A. and Loto, R. T. and AKANDE, I.G and Aworinde, Abraham K. and Araoyinbo, Alaba (2022) Adsorption Effect of Arachis hypogaea and Cocos nucifera Surfactant Inhibitors on 316L Steel in HCL Acid Solution. Key Engineering Materials, 917. pp. 108-115.

Falope, Funmi Y. and Obanla, O. R. and Oyedele, Adenike O. (2022) Development and property evaluation of alkyd resins from watermelon (Citrullus lanatus) seed oil. NIScPR Online Periodicals Reposit. pp. 62-67. ISSN 0975-0991 (Online); 0971-457X (Print)

Farzampour, Alireza and Mortazavi, Seyed Javad and Mansouri, Iman and Awoyera, P. O. and Hu, Jong Wan (2023) Multi-Story Buildings Equipped with Innovative Structural Seismic Shear Fuse Systems. Seismic Evaluation, Damage, and Mitigation in Structures. pp. 279-305.

Fayom, J. and Popoola, A. P. I. and Fayomi, O. S. I and Babaremu, Kunle (2018) Data on the effect of temperature variation tendency on the inhibitive absorption of Lasienthera africanum in 0.5MHCl: Anecessity. Data in Brief, 20. pp. 2003-2011.

Fayom, J. and Popoola, A. P. I. and Oladijo, O.P. and Popoola , M.O. and Fayomi, O. S. I (2019) Experimental study of ZrB2-Si3N4 on the microstructure, mechanical and electrical properties of high grade AA8011 metal matrix composites. Journal of Alloys and Compounds. pp. 610-615.

Fayom, J. and Popoola, A. P. I. and Popoola, M.O. and Fayomi, O. S. I (2021) The Appraisal of the thermal properties, electrical response, and corrosion resistance performance of AA8011 reinforced Nano Si3N4 for automobile application. Journal of Alloys and Compounds, 850 (5). ISSN 0925-8388

Fayomi, G.U. and Wusu, O. and Mini, S. E. and Fayomi, O. S. I and Kilanko, O. O (2018) Data analysis on the level of exposure to pollutions inindustrial zone: Acasestudy of Ewekoro and Ota Township. Data in Brief, 19. pp. 859-864. ISSN 2352-3409

Fayomi, J. and Popoola, A. P. I. and Popoola, M.O. and Fayomi, O. S. I and Ajenifuja, E. (2021) Response evaluation of AA8011 with nano ZrB2inclusion formultifunctional applications: Considering its thermal, electrical, andcorrosion properties. Journal of Alloys and Compounds, 853. ISSN 0925-8388

Fayomi, O. S. I (2020) Assessing the impact of Si3N4composite films and processvariable on the structural and corrosion improvement of structural steel used in construction industry. Case Studies in Construction Materials.

Fayomi, O. S. I (2017) Data on the optimized sulphate electrolytezinc rich coating produced through in-situ variation of process parameters. Data inBrief, 16. pp. 141-146.

Fayomi, O. S. I (2015) Effect of composite particulate reinforcement on the morphology, anti-corrosion and hardness properties of fabricated Zn-ZnO coatings. J. Mater. Environ. Sci., 6. pp. 963-968. ISSN 2028-2508

Fayomi, O. S. I (2018) Effect of functional composite coating developed via sulphate and chloride process parameter on the UNS G10150 steel for structural and wear mitigation in defence application. Defence Technology, 14. pp. 196-203.

Fayomi, O. S. I and AKANDE, I.G and Oluwole, O. O. and Daramola, D. (2018) Effect of water-soluble chitosan on the electrochemical corrosion behaviour of mild steel. Chemical Data Collections, 17 (18). pp. 321-326.

Fayomi, O. S. I and AKANDE, I.G and Popoola, A. P. I. (2018) Corrosion Protection Effect of Chitosan on the Performance Characteristics of A6063 Alloy. Journal of Bio- and Tribo-Corrosion, 4 (73).

Fayomi, O. S. I and AKANDE, I.G and Popoola, A. P. I. and Molifi, Hlatswayo (2019) Potentiodynamic polarization studies of Cefadroxil and Dicloxacillin drugs on the corrosion susceptibility of aluminium AA6063 in 0.5 M nitric acid. Journal of material reserach and technology, 8 (3). pp. 3088-3096.

Fayomi, O. S. I and AKANDE, I.G and Popoola, A. P. I. and Popoola, Segun I. (2019) Structural Characterization and Corrosion Properties of Electroless Processed Ni–P–MnO2 Composite Coatings on SAE 1015 Steel for Advanced Application. Journal of Science: Advanced Materials and Devices.

Fayomi, O. S. I and Abdulwahab, M and Durodola, B. M. and Popoola, A. P. I. and Joshua, T.O and Alao, A.O. and Joseph, O. O and Inegbenebor, A.O. (2013) STUDY OF THE ELECTROCHEMICAL BEHAVIOR AND SURFACE INTERACTION OF AA6063 TYPE AL-MG-SI ALLOY BY SODIUM MOLYBDATE IN SIMULATED SEA WATER ENVIRONMENT. International Journal of Management, Information Technology and Engineering, 1 (3). pp. 159-166.

Fayomi, O. S. I and Abdulwahab, M and Popoola, A. P. I. (2013) PROPERTIES EVALUATION OF TERNARY SURFACTANT-INDUCED Zn-Ni- Al2O3 FILMS ON MILD STEEL BY ELECTROLYTIC CHEMICAL DEPOSITION. Journal of Ovonic Research, 9 (5). 123 -132.

Fayomi, O. S. I and Abdulwahab, M and Popoola, A. P. I. (2014) Potentials of Elaeis guineensis and pinus sylvestris as binders on foundry core strength. Journal of Scientific & Industrial Research, 73. pp. 173-176.

Fayomi, O. S. I and Abdulwahab, M and Popoola, A. P. I. and Asuke, F. (2015) Corrosion Resistance of AA6063-Type Al-Mg-Si Alloy by Silicon Carbide in Sodium Chloride Solution for Marine Application. J. Marine Sci. Appl., 14. pp. 459-462.

Fayomi, O. S. I and Aigbodion, V.S. and Popoola, A. P. I. (2015) Properties of Tic/Tib Modified Zn–Tic/Tib Ceramic Composite Coating on Mild Steel. J Fail. Anal. and Preven.. pp. 54-64.

Fayomi, O. S. I and Atayero, A. A. and Mubiayi, M.P. and AKANDE, I.G and Adewuyi, P. A. and Fajobi, M. A. and Ayara, Williams A. and Popoola, A. P. I. (2019) Mechanical and opto-electrical response of embedded smart composite coating produced via electrodeposition technique for embedded system in defence application. Journal of Alloys and Compounds, 773. pp. 305-313.

Fayomi, O. S. I and Atayero, A. A. and Mubiayi, M.P. and AKANDE, I.G and Adewuyi, P. A. and Fajobi, M. A. and Ayara, Williams A. and Popoola, A. P. I. (2018) Mechanical and opto-electrical response of embedded smart composite coating produced via electrodeposition technique for embedded system in defence application. Journal of Alloys and Compounds. ISSN 0925-8388 (In Press)

Fayomi, O. S. I and Ayoola, A. A. and Omoniyi, E. B. and Okolie, S. T. (2018) Influence of aluminum silicate stabilizer on the coating structural composition and characteristics of multifunctional developed composite coating: a buildup for defense application. The International Journal of Advanced Manufacturing Technology.

Fayomi, O. S. I and Babaremu, Kunle and AKANDE, I.G (2019) MECHANICAL BEHAVIOUR OF COMPOSITE MATERIALS IN METAL. International Journal of Mechanical Engineering and Technology (IJMET), 10 (3). pp. 19-30. ISSN 0976-6359

Fayomi, O. S. I and Biodun, Biola Mathew and Okeniyi, Joshua Olusegun (2022) Metallic Oxide Nanoparticle from Agricultural Waste: A Review on Composition and Application. Key Engineering Materials, 936. pp. 157-174.

Fayomi, O. S. I and Daniyan, A.A. and Umoru, L. E. and Popoola, A. P. I. (2018) Data on the effect of current density relationship on the super-alloy composite coating by electrolytic route. Data in Brief, 18. pp. 776-780.

Fayomi, O. S. I and Fayom, J. and Elemike, E.E. (2018) Data on anti-corrosion characteristics of eco-friendly inhibitive extract on the hot corrosion degradation trend of A6063 aluminum alloy in 1.0MHC solution. Data in Brief, 19. pp. 2468-2476.

Fayomi, O. S. I and Gbenebor, O. P and Abdulwahab, M and Popoola, A. P. I. (2012) Performance Evaluation of some steels as extrusion die on AA6063-type Al-Mg-Si alloy. Indian Journal of Engineering and Materials Sciences, 19. pp. 403-410.

Fayomi, O. S. I and Gbenebor, O. P and Abdulwahab, M and Popoola, A. P. I. (2012) Performance evaluation of some steels as extrusion die on AA6063-type Ai-Mg-Sialloy. Indian Journal of Engineering & Materials Sciences, 19. pp. 403-410.

Fayomi, O. S. I and Joseph, O. O and AKANDE, I.G and Ohiri, C.K. and Enechi, K.O. and Udoye, Nduka Ekene (2019) Effect of CCBP doping on the multifunctional Al-0.5 Mg-15CCBP superalloy using liquid metallurgy process for advanced application. Journal of Alloys and Compounds, 783. pp. 246-255.

Fayomi, O. S. I and Joseph, O. O and Mubiayi, M.P. and Durodola, B. M. (2015) Microstructural evolution and characterization of super-induced MgO composite on zinc-rich coatings. egyptian journal of b a s i c and a p p l i e d s c i e n c e s. ISSN 0747-5632 (In Press)

Fayomi, O. S. I and Joseph, O. O and Mubiayi, M.P. and Durodola, B. M. and Gabriel, O. (2016) Microstructural evolution and characterization of super-induced MgO composite on zinc-rich coatings. egyptian journal of b a s i c and a p p l i e d s c i e n c e s, 3. pp. 1-9.

Fayomi, O. S. I and Kanyane, L.R and Popoola, A. P. I. and Oyedepo, Sunday Olayinka (2018) Electrolytic deposition of super-smart composite coating of Zn-V2O5- NbO2 on low carbon steel for defence application. Defence Technology, 14.

Fayomi, O. S. I and Loto, C. A. and Popoola, A. P. I. and Tau, V. R. (2014) Effect of Process Parameter on the in-situ Intermetallic Composite Coating and Microstructural Evolution of Zn-Al2O3 in the Presence of TEA/MEA on Mild Steel. International Journal of ELECTROCHEMICAL SCIENCE, 9. 7359 - 7368.

Fayomi, O. S. I and Ojo, O. I. and Popoola, A. P. I. (2011) Investigating (Ochadamu) silica sand, clay and local oils for foundry core. International Journal of the Physical Sciences, 6 (8). pp. 1894-1904. ISSN 1992 - 1950

Fayomi, O. S. I and Okokpujie, Imhade P. and Fayomi, G.U. and Okolie, S. T. (2019) The Challenge of Nigeria Researcher in Meeting up with Sustainable Development Goal in 21st Century. Energy Procedia, 157. pp. 393-404.

Fayomi, O. S. I and Olukanni, D. O. and Fayomi, G.U. and Joseph, O. O (2017) In situ assessment of degradable carbon effusion for industrial waste water treatment. Cogent Engineering, 4. pp. 1-7.

Fayomi, O. S. I and Oluwadare, G. A. and Fakehinde, O. B and AKANDE, I.G and Nwachia, W. and Russell, A. J. (2019) Evolution of physical and mechanical characteristics of deposited composite coatings on A356 mild steel. The International Journal of Advanced Manufacturing Technology.

Fayomi, O. S. I and Popoola, A. P. I. (2015) Anti Corrosion Properties and Structural Characteristics of Fabricated Ternary Coatings. Surface Engineering and Applied Electrochemistry, 51 (1). pp. 76-84. ISSN 1068-3755

Fayomi, O. S. I and Popoola, A. P. I. (2015) Anti-Corrosion Properties and Structural Characteristics of Fabricated Ternary Coatings. Surface Engineering and Applied Electrochemistry, 51 (1). pp. 76-84. ISSN 1068-3755

Fayomi, O. S. I and Popoola, A. P. I. (2015) Anti-Corrosion and Tribo-Mechanical Properties of Co-deposited Zn–SnO2 Composite Coating. Acta Metall. Sin. (Engl. Lett.), 28 (4). pp. 521-530.

Fayomi, O. S. I and Popoola, A. P. I. (2013) Assessing the inhibitory potential of natural silicon oil on brass degradation in 1M H2SO4. Research Journal of Chemistry and Environment, 17 (10). pp. 94-100.

Fayomi, O. S. I and Popoola, A. P. I. (2015) Chemical interaction, interfacial effect and the microstructural characterization of the induced zinc–aluminum–Solanum tuberosum in chloride solution on mild steel. Res Chem Intermed, 41. pp. 2393-2405.

Fayomi, O. S. I and Popoola, A. P. I. (2013) Comparative Evaluation of Chemical Deposition Parameters of an Induced Zn/Al-Zn and their Interfacial Characteristic Trend on Mild Steel. International Journal of ELECTROCHEMICAL SCIENCE, 8. 11502- 11511.

Fayomi, O. S. I and Popoola, A. P. I. (2015) Development of smart oxidation and corrosion resistance of multi-doped complex hybrid coatings on mild steel. Journal of Alloys and Compounds. pp. 382-392.

Fayomi, O. S. I and Popoola, A. P. I. (2015) Electrochemical Oxidation Assessment and Interaction of 2-aminoethanol and N, N-diethylethanamine Propagation in Acidic Medium. Protection of Metals and Physical Chemistry of Surfaces, 51 (5). pp. 891-898. ISSN 2070-2051

Fayomi, O. S. I and Popoola, A. P. I. (2014) In-situ formation characteristic, tribological characterization and anti-corrosion properties of quaternary composites films. Transactions of Nonferrous Metals Society of China, 24. pp. 3170-3180.

Fayomi, O. S. I and Popoola, A. P. I. (2014) The Inhibitory Effect and Adsorption Mechanism of Roasted Elaeis guineensis as Green Inhibitor on the Corrosion Processof Extruded AA6063 Al-Mg-Si Alloy in Simulated Solution. Silicon, 6 (2). ISSN 1876-990X

Fayomi, O. S. I and Popoola, A. P. I. (2014) The Inhibitory Effect and AdsorptionMechanism of Roasted Elaeis guineensis as Green Inhibitor on the Corrosion Process of Extruded AA6063 Al-Mg-Si Alloy in Simulated Solution. Silicon, 6. pp. 137-143.

Fayomi, O. S. I and Popoola, A. P. I. (2015) An Investigation of Composite Inclusion Corrosion Resistance Behavior of Thermally Liquid-Melt Inoculated Al-Mg-Si Alloy in Sodium Chloride Medium. Silicon, 7. pp. 49-53.

Fayomi, O. S. I and Popoola, A. P. I. (2012) An Investigation of the Properties of Zn Coated Mild Steel. International Journal of ELECTROCHEMICAL SCIENCE, 7. 6555- 6570.

Fayomi, O. S. I and Popoola, A. P. I. (2014) Study of Al2O3/SiC particle loading on the microstructural strengthening characteristics of ZneAl2O3eSiC matrix composite coating. e g y p t i a n j o u r n a l of b a s i c and ap p l i e d s c i e nces, 1. pp. 120-125.

Fayomi, O. S. I and Popoola, A. P. I. (2014) Study of Al2O3/SiC particle loading on the microstructural strengthening characteristics of ZneAl2O3eSiC matrix composite coating. egyptian journal of basic and applied sciences, 1. pp. 120-125.

Fayomi, O. S. I and Popoola, A. P. I. and ADAMS, F.V. (2016) Evolution and Anticorrosion Properties of Ni-Cu Thin Film Coatings on Low Carbon Steel. Asian Journal of chemistry, 28 (1). pp. 129-132.

Fayomi, O. S. I and Popoola, A. P. I. and Aigbodion, V.S. (2014) Effect of thermal treatment on the interfacial reaction, microstructural and mechanical properties of Zn–Al–SnO2/TiO2 functional coating alloys. Journal of Alloys and Compounds. pp. 455-463.

Fayomi, O. S. I and Popoola, A. P. I. and Aigbodion, V.S. (2015) Investigation on microstructural, anti-corrosion and mechanical properties of doped Zn–Al–SnO2 metal matrix composite coating on mild steel. Journal of Alloys and Compounds, 623. pp. 328-334.

Fayomi, O. S. I and Popoola, A. P. I. and Daniyan, A. A. (2016) Hybrid effect of an in situ multilayer Zn–ZnO–Cr2O3 electrodeposited nanocomposite coatings for extended application. Particulate Science and Technology. ISSN 0272-6351

Fayomi, O. S. I and Popoola, A. P. I. and Ige, O.O and Ayoola, A. A. (2017) Study of particle Incorporation and performance Characteristic of Aluminium Siliate-Zirconia Embedded on Zinc Rich Coatings for Corrosion and Wear Performance. Asian Journal of Chemistry, 29 (12). pp. 2575-2581.

Fayomi, O. S. I and Popoola, A. P. I. and Kanyane, L.R and Monyai, T. (2017) Development of reinforced in-situ anti-corrosion and wear Zn-TiO2/ZnTiB2 coatings on mild steel. Results in Physics, 7. pp. 644-650.

Fayomi, O. S. I and Popoola, A. P. I. and Kanyane, L.R and Monyai, T. (2017) Effect of Incorporating a Biodegradable Ecofriendly Additive in Pursuit of Improved Anti-Corrosion, Microstructure and Mechanical Properties of a Zn-based TiO2/TiB2 Coating by DAECD Technique. Portugaliae Electrochimica Acta, 35 (6). pp. 361-370.

Fayomi, O. S. I and Popoola, A. P. I. and Kgoete, F. and Joseph, O. O and Ayoola, A. A. (2018) Experimental study and sustainable surface-active effect of ECA hybrid particulate on tin-zinc infringement coating developed via DAECD technique on AISI 1015 steel. International Journal Nanoparticles, 10 (3). pp. 196-206.

Fayomi, O. S. I and Popoola, A. P. I. and Loto, C. A. (2014) Tribo-Mechanical Investigation and Anti-Corrosion Properties of Zn-TiO2 Thin Film Composite Coatings from Electrolytic Chloride Bath. International Journal of ELECTROCHEMICAL SCIENCE, 9. pp. 3885-3903.

Fayomi, O. S. I and Popoola, A. P. I. and Loto, C. A. (2015) The effect of particulate strengthening on microstructure and mechanical characterization of binary-modified composites on mild steel. Journal of Composite Materials, 49 (21). pp. 2625-2637.

Fayomi, O. S. I and Popoola, A. P. I. and Loto, C. A. and Adedokun, S. T. (2016) Evaluation of Composition, Microstructure Characterization and Interfacial Properties of Zn–SnO2 Metal Matrix Composite Coating. Protection of Metals and Physical Chemistry of Surfaces, 52 (2). pp. 238-243. ISSN 2070-2051

Fayomi, O. S. I and Popoola, A. P. I. and Monyai, T. (2016) IMPROVING THE PROPERTIES OF MILD STEEL BY TERNARY MULTILAYER COMPOSITE COATING VIA ELECTRODEPOSITION ROUTE. Bull. Chem. Soc. Ethiop., 30 (3). pp. 449-456. ISSN 1011-3924

Fayomi, O. S. I and Popoola, A. P. I. and OLORUNTOBA, D. T (2016) Nanoparticle Dispersion, Microstructure and Thermal Effect of Multi-doped ZrO2/SiC from Sulphate Induced Electrolyte. Protection of Metals and Physical Chemistry of Surfaces, 52 (3). pp. 512-516. ISSN 2070-2051

Fayomi, O. S. I and Popoola, A. P. I. and OLORUNTOBA, D. T and Ayoola, A. A. (2017) Inhibitive characteristics of cetylpyridinium chloride and potassium chromate addition on type A513 mild steel in acid/chloride media. Cogent Engineering, 4. pp. 1-9.

Fayomi, O. S. I and Popoola, A. P. I. and Oheiza, A. and Adekeye, T. (2015) Microstructure, tribological and mechanical strengthening effect of multiphase Zn/ZrO2-SiC electrodeposited composite coatings. Int J Adv Manuf Technol, 80. pp. 1489-1495.

Fayomi, O. S. I and Popoola, A. P. I. and Oladijo, O.P. and Popoola, M.O. and Fayomi, O. S. I (2019) Experimental study of ZrB2-Si3N4on the microstructure, mechanicaland electrical properties of high grade AA8011 metal matrixcomposites. Journal of Alloys and Compounds. pp. 610-615.

Fayomi, O. S. I and Popoola, A. P. I. and Olorunniwo, O. E. (2016) Structural and properties of Zn-Al2O3-SiC nano-composite coatings by direct electrolytic process. Int J Adv Manuf Technol. ISSN 0268-3768

Fayomi, O. S. I and Popoola, A. P. I. and Popoola, O. M. (2014) Inhibitive action and synergistic performance of 2-aminoethanol and N,Ndiethyl-ethanamine on copper in hydrochloric acid solution. Bulletin of the Chemical Society of Ethiopia, 28 (3). pp. 457-467.

Fayomi, O. S. I and Popoola, A. P. I. and Popoola , M.O. (2014) INHIBITIVE ACTION AND SYNERGISTIC PERFORMANCE OF 2-AMINOETHANOL AND N,N-DIETHYLETHANAMINE ON COPPER IN HYDROCHLORIC ACID SOLUTION. Bull. Chem. Soc. Ethiop, 28 (5). pp. 457-467.

Fayomi, O. S. I and Tau, V. R. and Popoola, A. P. I. and Abdulwahab, M (2015) Interfacial investigation and strengthening behaviour of Zn–Ni multifacial TEA/MEA thin films induced by electrodeposition. Appl. Phys. A, 121. pp. 749-755.

Fayomi, O. S. I and Udoye, Nduka Ekene and Anawe, Paul Apeye Lucky and Inegbenebor, A.O. (2018) The Effect Of Embedded Super Hard Composite On The Production Of Super Hard Materials: Necessity. Materials Focus, 7 (1). pp. 1-5.

Folayan, A. J, and Anawe, Paul Apeye Lucky and Aladejare, Adeyemi Emman and Ayeni, .A. O. (2019) Experimental investigation of the effect of fatty acids configuration, chain length, branching and degree of unsaturation on biodiesel fuel properties obtained from lauric oils, high-oleic and high-linoleic vegetable oil biomass. Energy Reports, 5. pp. 793-806.

Folayan , A. J, and Anawe, Paul Apeye Lucky and Abioye, Oluwabunmi P. and Elehinafe , F. Boluwaji (2017) Selecting the Most Appropriate Model for Rheological Characterization of Synthetic Based Drilling Mud. International Journal of Applied Engineering Research, 12 (18). pp. 7614-7629. ISSN 0973-4562

Funsho-Sanni, Ella and Sanni, Samuel Eshorame and luka, Abdulkarim and Ameh, Eleyi (2022) Serological evaluation of Newcastle disease protection among broilers at a live bird market in Kano, Northwest Nigeria, and its epidemiological significance. Journal of Immunoassay and Immunochemistry, 43 (5).

Ganapathy, G. P. and Gobinath, R and Akinwumi, I. I. and Kovendiran, S. (2016) Bio-Enzymatic Stabilization of a Soil Having Poor Engineering Properties. International Journal of Civil Engineering. ISSN 1735-0522

Ganiyu, S. A. and Badmus, B. S. and Oladunjoye , M.A and Aizebeokhai, A. P. and Ozebo, V. C. and Idowu, O. A and Olurin, O. T. Assessment of groundwater contamination around active dumpsite in Ibadan southwestern Nigeria using integrated electrical resistivity and hydrochemical methods. Environ Earth Sci.

Gbenebor, O. P and Abdulwahab, M and Fayomi, O. S. I and Popoola, A. P. I. (2012) INFLUENCE OF INOCULANT ADDITION AND COOLING MEDIUM ON THE MECHANICAL PROPERTIES OF AA 6063-TYPE Al-Mg-Si ALLOY. Chalcogenide Letters, 9 (5). pp. 201-211.

Gbenebor, O. P and Adeosun, S.O. and Fayomi, O. S. I and Joseph, O. O (2012) The influence of steel die parameter and micro-structural investigation on AA6063 aluminum alloy. International Journal of Scientific & Engineering Research, Volume, 3 (3). pp. 1-9. ISSN 2229-5518

Gbenebor, O. P and Fayomi, O. S. I and Popoola, A. P. I. and Inegbenebor, A.O. and Oyawale, Fetus A (2013) Extrusion die geometry effects on the energy absorbing properties and deformation response of 6063-type Al-Mg-Si alu1ninum alloy*. Results In Physics, 3. pp. 1-6.

Gbenebor, O. P and Fayomi, O. S. I and Popoola, A. P. I. and Inegbenebor, A.O. and Oyawale, Fetus A (2013) Extrusion die geometry effects on the energy absorbing properties and deformation response of 6063-type Al–Mg–Si aluminum alloy. Results in Physics, 3. pp. 1-6.

Gobinath, R and Akinwumi, I. I. and Afolayan, O. D. and Karthikeyan, Saravana and Manojkumar, Murugasamu and Gowtham, Sivaraj and Manikandan, Ayyasamy (2019) Banana Fibre-Reinforcement of a Soil Stabilized with Sodium Silicate. Silicon. pp. 1-7.

Gobinath, R and Ganapathy, G. P. and Akinwumi, I. I. (2015) Evaluating the use of lemon grass roots for the reinforcement of a landslideaffected soil from Nilgris district, Tamil Nadu, India. Journal of Materials and Environmental Science, 6 (10). pp. 2681-2687. ISSN 2028-2508

Gobinath, R and Ganapathy, G. P. and Akinwumi, I. I. and Kovendiran, S. and Hema, S and Thangaraj, M (2016) Plasticity, strength, permeability and compressibility characteristics of black cotton soil stabilized with precipitated silica. Journal of Central South University, 23 (10). pp. 2688-2694. ISSN 2095-2899

Hymore, F. K. and Wara, S.T. (2002) The ·Effect Of An Anti-Oxidant On The Bbreakdown Voltage Of Palm Olein "Samples. GLOBAL JOURNAL OF ENGINEI:RING RESEARCH, 1 (1). pp. 59-64.

Ibem, Eziyi O. and Adeboye, A. B. and Alagbe, O. A. (2015) Similarities And Differences In Residents' Perception OF Housing Adequacy And Residential Satisfaction. Journal of Building Performance, 6 (1). pp. 1-14. ISSN 2180-2106

Ibem, Eziyi O. and Aduwo, B. E. and Ayo-Vaughan, Emmanuel A. and Tunji-Olayeni, P .F (2018) A Survey of Digital Technologies Used in the Procurement of Building Projects: Empirical Evidence from Nigeria. Asian Journal of Scientific Research. ISSN 1992-1454

Ibem, Eziyi O. and Aduwo, B. E. and Uwakonye, O. and Tunji-Olayeni, P .F and Ayo-Vaughan, Emmanuel A. (2018) Survey data on e-Procurement adoption in the Nigerian building industry. Data in Brief, 18. pp. 823-826.

Ibem, Eziyi O. and Aduwo, B. E. and Uwakonye, O. and Tunji-Olayeni, P .F and Ayo-Vaughan, Emmanuel A. (2018) Survey data one-Procurement adoption in the Nigerian building industry. Data in Brief, 18. pp. 823-826.

Ibikunle, F. and Adefihan, B. (2013) Effectiveness of Information and Communication Technology (ICT) in Policing in Nigeria. Scottish Journal of Arts, Social Sciences and Scientific Studies, 11 (2). pp. 90-103. ISSN 2047-1278

Idachaba, F.E. Development of a Solar-ESP Wellhead System For Remote Wellhead Operations in Marginal Oilfields. Society O Petroleum Engineers.

Idachaba, F.E. Nigerian Content Development in The Oil and Gas Sector: The Role of The Nigerian Academia. Society of Petroleum Engineers. pp. 1-9.

Idachaba, F.E. and Ibhaze, Augustus E. (2016) Development of a Real Time Road Accident Location and Emergency Alert System. International Journal of Applied Engineering Research, 11 (23). pp. 11110-11113. ISSN 0973-4562

Idachaba, F.E. and Ibhaze, Augustus E. (2016) GSM/GPS Assisted Road and Traffic Congestion Detection System. International Journal of Applied Engineering Research, 11 (24). pp. 11610-11613. ISSN 0973-4562

Idachaba, F.E. and Rabiei, Minou (2021) Current technologies and the applications of data analytics for crude oil leak detection in surface pipelines. Journal of Pipeline Science and Engineering, 1. pp. 436-451.

Idowu-Bismark, Olabode and Idachaba, F.E. and Atayero, A. A. (2017) Massive MIMO Channel Characterization and Modeling: The Present and the Future. International Journal of Applied Engineering Research, 12 (23). pp. 13742-13754. ISSN 0973-4562

Idowu-Bismark, Olabode and Idachaba, F.E. and Atayero, A. A. (2017) A Survey on Traffic Evacuation Techniques in Internet of Things Network Environment. Indian Journal of Science and Technology,, 10 (33). ISSN (Print) : 0974-6846 (Online) : 0974-5645

Idowu-Bismark, Olabode and Okokpujie, Kennedy O. and Ryan , Husbands and Adedokun, Michael O. (2019) 5G Wireless Communication Network Architecture and Its Key Enabling Technologies. International Review of Aerospace Engineering (I.RE.AS.E), 12 (2). pp. 70-82. ISSN 1973-7459

Idubor, Scott O. and Noma-Osaghae, Etinosa and Ogbeide, Kingsley O. and Okokpujie, Kennedy O. (2018) A Step Towards Enhancing Spectrum Utilization by Implementing a Spectrum Sensing Cognitive Radio Using an RTL-SDR. International Journal on Communications Antenna and Propagation, 8 (5). pp. 439-447. ISSN 2039 – 5086

Ifechukwu, Michaels and Oladepo, Adebowale Overcoming Limitations of Empirical Steady State Models Using Multi Rate Testing, MRT. SPE-178353-MS. pp. 1-18.

Ifijeh, H. A. and Fagbohun, O. Oludare (2018) Modelling And Simulation of Voice Over Internet Protocol (Voip) Over Wireless Local Area Network (WLAN). INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH, 7. pp. 111-118. ISSN 2277-8616

Ige, S. F. and Salawu, E. O. and Olaleye, S. B. and Adeeyo, O.A. and Badmus, J. and Adeleke, A. Onion (Allium cepa) extract prevents cadmium induced renal dysfunction. Indian J Nephrol, 19 (4). 140–144. -144.

Ighravwe, D.E and Babatunde, Damilola Elizabeth (2019) Evaluation of landfill gas plant siting problem: a multi-criteria approach. Environmental Health Engineering and Management Journal, 6 (1). pp. 1-10.

Ighravwe, D.E and Oke, Sunday Ayoola (2017) Optimal Determination for Cost of Electric Power Generation and Plant Capacity of Utilities. Walailak Journal of Science & Technology, 14 (6). pp. 463-484.

Igwilo, K. C. and Anawe, Paul Apeye Lucky and Okolie, T. A. Sociis and Uzorchukwu, Ikeagwu and Onuh, C.Y (2017) Evaluation of the Fluid Loss Property of Annona muricata and Carica papaya. Open Journal of Yangtze Gas and Oil, 2. pp. 144-150. ISSN 2473-1900

Igwilo, K. C. and Anawe, Paul Apeye Lucky and Orodu, O. D. and Okolie, T. A. Sociis and Okechukwu, L. T. (2017) Evaluation of Nigerian Waxy Crude Oil Using Rheological Models. International Journal of Petroleum and Petrochemical Engineering, 3 (1). pp. 35-39. ISSN 2454-7980 (Online)

Ikotun, Jacob Olumuyiwa and Okeniyi, Joshua Olusegun and Akinlabi, Esther T. and Akinlabi, Stephen A. and Okeniyi, Elizabeth Toyin and OLANREWAJU, Deborah Olukemi (2019) Physicochemical and mineralogical characterization datasets from oil drill cuttings in comparison with other cement types for cement partial-replacement in concrete. Chemical Data Collections, 19.

Ikotun, Jacob Olumuyiwa and Okeniyi, Joshua Olusegun and Akinlabi, Esther T. and Akinlabi, Stephen Akinwale and Okeniyi, Elizabeth Toyin and OLANREWAJU, Deborah Olukemi (2019) Physicochemical and mineralogical characterization datasets from oil drill cuttings in comparison with other cement types for cement partial-replacement in concrete. Chemical Data Collections, 19.

Ikumapayi, O. M. and Ojolo, S.J and Afolalu, Sunday A. (2015) EXPERIMENTAL AND THEORETICAL INVESTIGATION OF TENSILE STRESS DISTRIBUTION DURING ALUMINIUM WIRE DRAWING. European Scientific Journal, 11 (18). pp. 86-102. ISSN 1857- 7431

Ilaboya, I.R. and Wara, S.T. and Hymore, F. K. Re- Engineering Our Waste Management Methods: A Road .··Map To Sustainable Waste Management Practice In Nigeria. Journal Of Engineering And Economic Development (JETED). pp. 49-58.

Ilori, T. A and Raji, A. O and Kilanko, O. O (2013) Modelling some ergonomic parameters with machine parameter using hand powered maize sheller. Journal of Engineering and Technology Research, 5 (3). pp. 52-57. ISSN 2006-9790

Ilori, T. A and Raji, A. O and Kilanko, O. O (2018) SOME PHYSICAL PROPERTIES OF SELECTED VEGETABLE. Journal of Agricultural and Veterinary Sciences, 2 . pp. 101-109.

Inegbenebor, A.O. (2002) ON THE EFFECTIVENESS OF THE LOCALLY FORMULATED CUTTING FLUID. Nlg . Jour. Eng. & Tech, 1 (1). pp. 10-18.

Inegbenebor, A.O. (1998) Possibilities of Developing New Steels with High M~lg?Uese Contents in Nigeria. JOURNAL OF ENGINEERING RESEARCH, 6 (2). pp. 37-46. ISSN 0795- 2333

Inegbenebor, A.O. Production Of Solid Fuel Briquettes From Agricultural And Wood Waste (Saw Dust And Rice Husk). African Journal of Science and Technology (AJST), 3 (2). pp. 118-122.

Inegbenebor, A.O. (1993) THE STUDIES OF CHEMICAL ANALYSIS OF RAW MATERIALS FOR GLASS;INDUSTRY IN THE ARID ZONE OF NIGERIA. N. f. Prod. E. TECHNIC4L TRA.NSACTIONS, 1 (2). ISSN /117-5893

Inegbenebor, A.O. (2002) A STUDY OF Engineering CAREER PROSPECT AMONG ' ' ,· . . ' . . SECONDARY SCHOOL PUPILS IN KADUNA STATE. Nigerian Journal of Technical Education.

Inegbenebor, A.O. and Adeniji, F. A (2007) Electrical lnsulative Properties of Some Agro-Waste Material~. West Indian Journal of Engineering, 30 (1). pp. 17-26.

Inegbenebor, A.O. and Balami, A.A (1998) Design And Construction Of Universal Grain Thresher. Nigerian Institution Of Production Engineering.

Inegbenebor, A.O. and Bolu, Christian and Babalola, P.O. and Inegbenebor, A. I. and Fayomi, O. S. I (2016) Aluminum Silicon Carbide Particulate Metal Matrix Composite Development Via Stir Casting Processing. Silicon.

Inegbenebor, A.O. and Bolu, Christian and Babalola, P.O. and Inegbenebor, A. I. and Fayomi, O. S. I (2016) Influence of the Grit size of Silicon Carbide Particles on the Mechanical and Electrical Properties of Stir Casting Aluminum Matrix Composite Material. Springer, 8 (4). pp. 573-578. ISSN 1570-646X

Inegbenebor, A.O. and Galadima, J.D. (2001) Manpower Planning For Process Industries: A Case Study Of Delta Steel Company. Journal of Social and Management Sciences, 8 (1 & 2). 1O -19.

Inegbenebor, A.O. and Inegbenebor, A. I. (2011) MAINTENANCE OF WATER THROUGH THE DEVELOPMENT OF ACTIVATED CARBON FILTER FROM LOCAL RAW MATERIALS. BOTSWANA JOURNAL OF TECHNOLOGY.

Inegbenebor, A.O. and MALACHY, S. (1998) THE PROCESSING OF FIBROUS WASTE MATERIALS (SAW-DUST AND RICE HUSK) TORE USED AS AN ALTERNATIVE TO FUEL WOOD IN DOMESTIC APPLICATIONS. N.I.PROD.E. TECHNICAL TRANSACTIONS. ISSN 1117-5893

Inegbenebor, A.O. and Olalekan, O . A. (2002) A SURVEY OF SAFETY PRACTICES IN SOME MANUFACTURING INDUSTRIES IN NORTHEASTERN STATES OF NIGERIA. NJISS, 3 (2). pp. 42-46.

Inegbenebor, Adedayo I. and Mordi, Raphael C. and Idowu, Abosede O. and Siyanbola, T. O. and Akanle, B. and Evbuoma, I. K. and Inegbenebor, A.O. (2018) CONSEQUENCES OF THE ACTIVITIES OF A NIGERIAN CEMENT INDUSTRY ON THE ENVIRONMENT. International Journal of Applied and Natural Sciences (IJANS), 7 (4). pp. 67-74. ISSN 2319-4022

Iroham, C.O. and Ogunba, O.A. and Oloyede, S. A. (2014) Effect of Principal Heuristics on Accuracy of Property Valuation in Nigeria. Journal of Land and Rural Studies, 2 (1). pp. 89-111.

Iroham, C.O. and Ogunba, O.A. and Oloyede, S. A. (2013) Relative Level of Occurrence of the Principal Heuristics in Nigeria Property Valuation. International Journal of Development and Sustainability, 2 (2). pp. 493-504. ISSN 2168-8662

Iroham, C.O. and Ogunba, O.A. and Oloyede, S. A. (2013) Usage of Major Heuristics in Property Investment Valuation in Nigeria. An International Multidisciplinary Journal, Ethiopia, 7 (4). pp. 93-119. ISSN 2070--0083

Iroham, C.O. and Oloyede, S. A. and Akinjare, O. A. (2011) Reference and Anchor Points in Property Negotiation: What Influence Has the Estate Valuer? International Journal of Marketing Studies, 3 (1). pp. 156-161. ISSN 1918-7203

Iroham, C.O. and Oloyede, S. A. and Oluwunmi, Adedamola O (2011) An Analysis of the Location of Worship Centers on Residential Property Values in Ota,Nigeria. Journal of Sustainable Development in Africa, 13 (1). pp. 13-22. ISSN 1520-5509

Iroham, C.O. and Oluwunmi, Adedamola O and Simon, R.F. and Akerele, B.A. (2014) Assessing the Trend in Rental Values of Commercial Properties Along Oyemekun Road,Akure,Nigeria. Covenant Journal of Research in the Built Environment (CJRBE), 1 (1). pp. 10-29.

Ishola, Felix and Kilanko, O. O and Inegbenebor, A.O. (2019) DESIGN AND PERFORMANCE ANALYSIS OF A MODEL PICO SIZE PELTON WHEEL TURBINE. International Journal of Civil Engineering and Technology, 10 (5). pp. 727-739. ISSN 0976-6316

Ishola, Felix and Oyawale, Fetus A and Inegbenebor, A.O. and Boyo, H.O. and Akinlabi, Stephen A. and Oyetunji, Oluremilekun (2020) Mathematical Analysis and Thermal Modelling ofa Pilot-Scale Pyrolysis Gas Furnace. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (1). pp. 81-93.

Isife, Olisaemeka and Okokpujie, Kennedy O. and Okokpujie, Imhade P. and Subair, Roselyn E. and Akingunsoye, Adenugba Vincent and Awomoyi, Morayo E. (2023) Development of a Malicious Network Traffic Intrusion Detection System Using Deep Learning. International information and Engineering Technology Association, 13 (4). pp. 587-595.

Isleem, Haytham F. and Chukka, Naga Dheeraj Kumar Reddy and Bahrami, Alireza and Oyebisi, S.O and Kumar, Rakesh and Qiong, Tang (2023) Nonlinear finite element and analytical modelling of reinforced concrete filled steel tube columns under axial compression loading. Results in Engineering.

Isleem, Haytham F. and Chukka, Naga Dheeraj Kumar Reddy and Bahrami, Alireza and Oyebisi, S.O and Kumar, Rakesh and Qiong, Tang (2023) Nonlinear finite element and analytical modelling of reinforced concrete-filled steel tube columns under axial compression loading. Results in Engineering, 19.

Jegede, A. E. and Ajayi, M. P. and Allo, T. (2016) Risk and Investment Decision Making in the Technological Age: A Dialysis of Cyber Fraud Complication in Nigeria. International Journal of Cyber Criminology (IJCC), 10 (1). pp. 62-78. ISSN 0973-5089

John, M. F. and Olabode, O.A. and Egeonu, G. I. and Ojo, T. i. (2017) Enhanced Oil Recovery of Medium Crude Oil (310 Api) Using Nanoparticles and Polymer. International Journal of Applied Engineering Research, 12 (19). pp. 8425-8435. ISSN 0973-4562

John, S. N. and Albert, Ola Ajibade and Okokpujie, Kennedy O. and Noma-Osaghae, Etinosa and Osemwegie, Omoruyi and Okereke, Chinonso (2019) Mitigating Threats in a Corporate Network with a Taintcheck-Enabled Honeypot. Information Science and Applications, 621. pp. 73-83.

John, S. N. and Ibikunle , Frank and Akinola , Emmanuel Online Mobile Phone Recharge System in Nigeria. European Journal of Scientific Research. ISSN ISSN 1450-216X

John, S. N. and Okonigene, R. E. and Akinade, B. and Kasali, I. G. and Adewale, Adeyinka A. (2011) Developed Model to Control Congestion on Converge Network. NTERNATIONAL JOURNAL OF INNOVATIVE TECHNOLOGY & CREATIVE ENGINEERING, 1 (8). pp. 1-5. ISSN 2045-8711

John , S. N. (2005) INCREASING THE EFFICIENCY OF DATA EXCHANGE IN A COMPUTER NETWORKS BASED ON THE PROTOCOL OF TCP/IP SUITE. Donestsk National Technocal University. pp. 256-264.

Joseph, O. O (2017) Chloride effects on the electrochemical degradation of micro-alloyed steel in E20 simulated fuel ethanol blend. Results in Physics, 7. pp. 1446-1451.

Joseph, O. O and Ajayi, J.A. and Ajayi, O. O. and Fayomi, O. S. I and Joseph, O. O and Gbenebor, O. P (2012) MATERIAL PERFORMANCE INVESTIGATION ON THE FAILURE OF AN AIRCRAFT (ABT-18) NOSE WHEEL STRUT. International Journal of Industrial Engineering & Technology (IJIET), 2 (3). pp. 1-6.

Joseph, O. O and Aluko, Olalekan Michael (2022) Effect of Synthetic Materials in Reinforcement of Aluminium Matrix Composites. Materials Science Forum, 1076. pp. 3-11.

Joseph, O. O and Babaremu, Kunle (2019) AgriculturalWaste as a Reinforcement Particulate for Aluminum Metal Matrix Composite (AMMCs): A Review. Fibers, 7 (33). pp. 1-9.

Joseph, O. O and Fayomi, O. S. I and Joseph, Olakunle O. and Afolalu, Sunday A. and Mubaiyi, M. P. and Olotu, O. N. and Fashola, O. J. (2022) A comparative study on the corrosion behaviour of welded and un-welded API 5L X70 steel in simulated fuel grade ethanol. Cogent Engineering.

Joseph, O. O and Joseph, O. O and Leramo, R.O. and Ojudun, O.S. (2015) Effect of Heat Treatment on Microstructure and Mechanical Properties of SAE 1025 Steel: Analysis by one-way ANOVA. J. Mater. Environ. Sci., 6 (1). pp. 101-106. ISSN 2028-2508

Joseph, O. O and Loto, C. A. and Ajayi, J.A. and Sivaprasad, S. (2017) Role of Chloride on the Environmental Degradation of Micro-Alloyed Steel in Simulated Fuel Grade Ethanol Environment. Materials Performance and Characterization, 6 (3). pp. 334-345.

Joseph, Williams Ajuwaeze and Loto, R. T. and Babalola, P.O. and Okeniyi, Joshua Olusegun (2023) Analysis of the effect of Zea Mays husk particulate reinforcement on 1170 Aluminium corrosion in a simulated industrial environment. Key Engineering Materials. pp. 97-107.

Joshua, Opeyemi and Olusola, K. O and Busari, A. A. and Omuh, I. O. and Ogunde, Ayodeji and Amusan, L. M. and Ezenduka, Chidiogo J. (2018) Data on the pozzolanic activity in coconut shell ash (CSA)for use in sustainable construction. Data in Brief, 18. pp. 1142-1145. ISSN 2352-3409

Joshua, Opeyemi and Olusola, K. O and Oyeyemi , Kehinde D. and Ogunde, Ayodeji and Amusan, L. M. and Nduka, David and Abuka-Joshua, Joyce (2018) Data of the properties of rebar steel brands in Lagos,Nigerian market used in reinforced concrete applications. Data inBrief, 17. pp. 1428-1431.

Justin, L.D and Olukanni, D. O. and Babaremu, Kunle (2022) Performance assessment of local aquatic macrophytes for domestic wastewater treatment in Nigerian communities: A review. Heliyon, 8 (8). ISSN 2405-8440

Kamalu, Ikenna C. and Anusi, M. and Kamen, F.L and Okwara, C.A. and Nwakaudu, M.S. and Nwakaudu, A.A and Obijiaku, J.C (2016) Modelling the Dynamics of a Hypereutrophication Process in Ruguma Ponds in Rumuosi-Akpor, Nigeria. International Journal of Innovative Science, Engineering & Technology, 3 (5). pp. 210-225. ISSN 2348 – 7968

Kamalu, Ikenna C. and Dozie, N.S. and Oghome, P. and Nwakaudu, M.S. and Uzondu, F.N. and Obijiaku, J.C. (2016) S-I-S COMPARTMENTAL MODELING AND PREDICTIVE ANALYSIS OF EBOLA OUTBREAK IN CENTRAL AND WEST AFRICA. World Journal of Engineering Research and Technology, 2 (3). pp. 13-36. ISSN 2454-695X

Kamalu, Ikenna C. and Nwakaudu, A.A and Onyelucheya, O. E and Uzondu, F.N. and Kamen, F.L and Nwakaudu, M.S. and Obijiaku, J.C. (2016) Curve-Fitting of Bioremediation of Polycyclic Aromatic Hydrocarbons (PAHs) By Co-Composting Using Roost Manure. International Journal of Emerging Technologies in Engineering Research, 4 (7). p. 156. ISSN 2454-6410

Kamalu, Ikenna C. and Nwakaudu, M.S. and Nkuzinna, O.C and Uzondu, F.N. and Effiong, E.E and Obibuenyi, I.J (2015) CHEMICAL COMPOSITION OF THE NEST AND MODELS OF THE METAMOPHIC POLYMORPHISM OF THE MUD DAUBER WASP. International Journal of Applied Chemical Sciences Research, 3 (2). pp. 1-14. ISSN 2328 - 2827

Kamalu, Ikenna C. and OPEBIYI, S.O. and Oghome, P. (2014) Establishment of New Special Deductions from Gauss Divergence Theorem in a Vector Field. International Journal of Engineering Science Invention, 3 (8). pp. 49-53. ISSN 2319 – 6734

Kamalu, Ikenna C. and Oghome, P. (2008) EXTRACTION AND CHARACTERIZATION OF OIL FROM PRE-MATURE PALM KERNEL. Journal of Agricultural Engineering and Technology (JAET), 16 (2). pp. 29-33.

Kamalu, Ikenna C. and Oghome, P. (2016) A study of starch and Cyanide Contents in Etche Manufactured Garri. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS), 3 (4). pp. 589-593. ISSN 2141-7016

Kamalu, Ikenna C. and Okolie, I. J. Chemical Composition and Modeling of the Functions of Termitarium. Journal Of Environmental Science, Toxicology And Food Technology (IOSR-JESTFT), 5 (4). pp. 36-42. ISSN 2319-2402

Kamalu, Ikenna C. and Okolie, I. J. (2015) Kinetic Modeling of Mango Fruit Ripening. Innovative Systems Design and Engineering, 6 (2). pp. 39-51. ISSN 2222-2871

Kamalu, Ikenna C. and Okolie, I. J. (2013) MODELING AND OPTIMIZATION OF WATER-JET TRANSPORT PHENOMENON IN FIRE SERVICE. Research Journal in Engineering and Applied Sciences, 2 (6). pp. 434-438. ISSN 2276-8467

Kamalu, Ikenna C. and Okolie, I. J. Modeling The Mechanism Of Carbon Capture And Sequestration (Ccs) In A System. INTERNATIONAL JOURNAL OF TECHNOLOGY ENHANCEMENTS AND EMERGING ENGINEERING RESEARCH, 1 (2). pp. 64-71. ISSN 2347-4289

Kamalu, Ikenna C. and Okolie, I. J. (2013) The analysis of logistic curves and peaking in petroleum production. Journal of Emerging Trends in Engineering and Applied Sciences, 4 (5). pp. 759-762.

Kamalu, Ikenna C. and Onuoha, O.E and Uzondu, F.N. and Effiong, E.E and Obibuenyi, I.J and Onyelucheya, O. E Prediction and Analysis of Variable Parameters of some established models in Batch Beer Fermentation. International Journal of Innovative Research in Technology & Science(IJIRTS), 3 (6). pp. 11-18. ISSN 2321-1156

Kamalu, Ikenna C. and Osoka, E.C. (2010) Determination of the Rate of Calcination During Cement Production. Agricultural Journal, 5 (3). pp. 186-189. ISSN 1816-9155

Kamalu, Ikenna C. and Osoka, E.C. and Nwakaudu, M.S. (2012) BLEACHING OF CRUDE PALM KERNEL OIL USING ACTIVATED SNAIL SHELL. Research Journal in Engineering and Applied Sciences, 1 (5). pp. 323-326. ISSN 2276-8467

Kamel, H.E.M. and Al-Dobaib, S.N. and Salem, Abdelfattah Z.M. and López, S. and Alaba, Peter Adeniyi (2018) Influence of dietary supplementation with sunflower oil and quebracho tannins on growth performance and meat fatty acid profile of Awassi lambs. Animal Feed Science and Technology. pp. 97-104.

Karakara , Alhassan A. and Osabuohien, E. S. C. (2018) Households' ICT access and bank patronage in West Africa: Empirical insights from Burkina Faso and Ghana. Technology in Society.

Kareem, M. A. and Bamigboye, Gideon and Olawale, S.O.A. and Tijani, M.A. and Ishola, K. and Olawuyi, O. A. (2019) A Response Surface Approach for Determining Optimal Mix Parameters for Normal Strength Concrete. journal of Engineering and Environmental Sciences, 1 (1).

Kayode, O.T and Akinwumi, I. I. (2017) Residual Soils Derived from Charnockite and Migmatite as Road Pavement Layer Materials. Journal of Materials and Environmental Sciences, 8 (2). pp. 657-665. ISSN 2028-2508

Ketebu, Orlando and Gumus, Rhoda and Orodu, O. D. (2015) THE EFFECT OF REVOLUTION PER MINUTE (RPM) ON IRON OXIDE NANOPARTICLES (Fe3O4NPS) SYNTHESIS THROUGH DIRECT OXIDATIVE ALKALINE HYDROLYSIS. International Journal of Academic Research and Reflection, 3 (5). pp. 90-98. ISSN 2309-0405

Kgoete, F. and Popoola, A. P. I. and Fayomi, O. S. I (2018) Data on the influence of TiN on wear and corrosion behavior of Ti–6Al–4V alloy fabricated through spark plasma sintering. Data in Brief, 19. pp. 1989-1996. ISSN 2352-3409

Kgoete, F. and Popoola, A. P. I. and Fayomi, O. S. I (2019) Oxidation resistance of spark plasma sintered Ti6Al4V-TiN composites. Journal of Alloys and Compounds. pp. 943-948.

Kgoete, F. and Popoola, A. P. I. and Fayomi, O. S. I and Adebiyi, D.I (2018) Influence of Si3N4 on Ti-6Al-4V via spark plasma sintering: Microstructure, corrosion and thermal stability. Journal of Alloys and Compounds. pp. 322-328.

Kilanko, O. O and Ojolo, S.J and Inegbenebor, A.O. and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Oyedepo, Sunday Olayinka (2018) Design and performance evaluation of centrifugal cashew nut sheller for improving the whole kernel recovery. AgricEnglnt: CIGR, 20 (1). pp. 162-170.

Kim, Young-Chan and Mortazavi, Seyed Javad and Farzampour, Alireza and Hu, Jong Wan and Mansouri, Iman and Awoyera, P. O. Optimization of the Curved Metal Damper to Improve Structural Energy Dissipation Capacity. Buildings, 12 (1).

Kumar, Selvaraj and Murthi, P and Awoyera, P. O. and Gobinath, Ravindran and kumar, Sathis (2022) Impact Resistance and Strength Development of Fly Ash Based Self-compacting Concrete. Silicon, 14. pp. 481-492.

Laniyan, T. A. and Olatunji, A. S. and Bayewu, O. O. and Mosuro, G. O. and Odukoya, M. O. and Kenjinu, S. and Odunuga, S. T. (2015) Physicochemical assessment and bacteriological studies of hand-dug wells of major markets in south western, Nigeria. Arabian Journal of Geosciences, 9 (4). pp. 1-8. ISSN 1866-7511

Leramo, R.O. and Adekoya, Lawson O. and Kilanko, O. O and Oyedepo, Sunday Olayinka and Eluwa, Stephen E. and Babalola, P.O. and Adeosun, Samson O. and Leramo, Nicholas T. and Aiyedun, Peter O. and Ohunakin, O.S. and Ajayi, O. O. and Fayomi, O. S. I (2022) A comparative analysis of the chemical composition and compliance level to established standards of concrete reinforcement steel rods rolled in Nigeria. Heliyon, 8 (6). ISSN 2405-8440

Liang, Yao and Wang, Zhenli and Rotimi, Oluwatosin J. and Li, Xueliang and Chen, Guiting and Shi, Hu and Cui, Rui (2018) Fracture characterization using diffraction attributes in tight sandstone reservoirs: A case study from Keshen Gas Field, Tarim Basin. Society of Exploration Geophysicists. ISSN 1949-4645

Loto, C. A. and Fayomi, O. S. I (2019) POTENTIODYNAMIC POLARIZATION AND GRAVIMETRIC EVALUATION OF CORROSION OF COPPER IN 2M H2SO4 IN ABSENCE AND PRESENCE OF AMMONIUM DICHROMATE AS AN INHIBITOR. Journal of Chemical Technology and Metallurgy, 54 (1). pp. 209-216.

Loto, C. A. and Fayomi, O. S. I and Loto, R. T. (2015) Corrosion Polarization and K2Cr2O7 Inhibition Behaviour of Martensitic Stainless Steel in H3PO4 and H3PO4 + 3.65% NaCl Environments. Silicon.

Loto, C. A. and Fayomi, O. S. I and Loto, R. T. (2015) Electrochemical corrosion resistance and inhibition behaviour of martensitic stainless steel in hydrochloric acid. Der Pharma Chemica, 7 (10). pp. 102-111. ISSN 0975-413X

Loto, C. A. and Fayomi, O. S. I and Loto, R. T. and Popoola, A. P. I. (2015) Electrochemical corrosion resistance and susceptibility of 12Cr martensitic stainless steel in H2SO4. Journal of Chemical and Pharmaceutical Research, 7 (10). pp. 39-48. ISSN 0975-7384

Loto, C. A. and Fayomi, O. S. I and Loto, R. T. and Popoola, A. P. I. (2019) POTENTIODYNAMIC POLARIZATION AND GRAVIMETRIC EVALUATION OF CORROSION OF COPPER IN 2M H2SO4 IN ABSENCE AND PRESENCE OF AMMONIUM DICHROMATE AS AN INHIBITOR. Journal of Chemical Technology and Metallurgy, 54 (1). 209--216.

Loto, C. A. and Joseph, O. O and Loto, R. T. (2014) Adsorption and Inhibitive Properties of Camellia Sinensis for Aluminium Alloy in HCI. International Journal of ELECTROCHEMICAL SCIENCE, 9. 3637- 3649.

Loto, C. A. and Joseph, O. O and Loto, R. T. (2015) Effect of Vernonia amygdalina extract and zinc oxide inhibitor on the corrosion of mild steel reinforcement in concrete in 0.2M H2SO4 Environment. Journal of Chemical and Pharmaceutical Research, 7 (10). pp. 871-881. ISSN 0975-7384

Loto, C. A. and Joseph, O. O and Loto, R. T. (2016) Inhibition Effect of Zinc Oxide on the Electrochemical Corrosion of Mild Steel Reinforced Concrete in 0.2M H2SO4. J. Mater. Environ. Sci., 7 (3). pp. 915-925. ISSN 2028-2508

Loto, C. A. and Joseph, O. O and Loto, R. T. (2013) Inhibition effect of Vernonia amygdalina extract on the corrosion of mild steel reinforcement in concrete in 0.2 M H2SO4 Environment. European Journal of Environmental and Civil Engineering. pp. 1-13.

Loto, C. A. and Joseph, O. O and Loto, R. T. and Popoola, A. P. I. (2015) Effect of zinc oxide on the corrosion inhibition of mild steel embedded in concrete in 3.5% NaCl solution. Der Pharma Chemica,, 7 (12). pp. 85-96. ISSN 0975-413X

Loto, C. A. and Loto, R. T. (2013) Effect of Dextrin and Thiourea Additives on the Zinc Electroplated Mild Steel in Acid Chloride Solution. Int. J. Electrochem. Sci., 8. 12434 - 12450.

Loto, C. A. and Loto, R. T. (2016) Inhibition effect of garlic extracts on the corrosion of alpha brass in nitric acid. Der Pharma Chemica, 8 (2). pp. 162-171. ISSN 0975-413X

Loto, C. A. and Loto, R. T. and Joseph, O. O (2017) Effect of Benzamide on the Corrosion Inhibition of Mild Steel in Sulphuric Acid. S. Afr. J. Chem., 70. pp. 38-43.

Loto, C. A. and Loto, R. T. and Oshogbunu, Ohwofasa J. (2016) Corrosion inhibition effect of Allium sativum extracts on mild steel in HCl and H2SO4. Journal of Chemical and Pharmaceutical Research, 8 (2). pp. 216-230. ISSN 0975-7384

Loto, C. A. and Loto, R. T. and Popoola, A. P. I. (2011) Corrosion and plants extracts inhibition of mild steel in HCl. International Journal of the Physical Sciences, 6 (15). pp. 3616-3623. ISSN 1992-1950

Loto, C. A. and Loto, R. T. and Popoola, A. P. I. (2011) Corrosion and plants extracts inhibition of mild steel in HCl. International Journal of the Physical Sciences. pp. 3616-3623. ISSN 1992-1950

Loto, C. A. and Loto, R. T. and Popoola, A. P. I. (2011) Effect of neem leaf (Azadirachita indica) extract on the corrosion inhibition of mild steel in dilute acids. International Journal of the Physical Sciences, 6 (9). pp. 2249-2257. ISSN 1992 - 1950

Loto, C. A. and Loto, R. T. and Popoola, A. P. I. (2011) Electrode Potential Monitoring of Effect of Plants Extracts Addition on the Electrochemical Corrosion Behaviour of Mild Steel Reinforcement in Concrete. International Journal of ELECTROCHEMICAL SCIENCE, 6. 3452- 3465.

Loto, C. A. and Loto, R. T. and Popoola, A. P. I. (2019) Evaluation of cathodic protection of mild steel with magnesium anodes in 0.5 M HCL. Chemical Data Collections, 22.

Loto, C. A. and Loto, R. T. and Popoola, A. P. I. (2011) An investigation of carburization resistance performance of ethylene furnace tube alloys. International Journal of the Physical Sciences, 6 (19). pp. 4596-4607. ISSN 1992 - 1950

Loto, C. A. and Olofinjana, A. and Loto, R. T. (2014) Effect of Manihot Esculenta C. Leaf Extract Additive on the Zinc Electroplating on Mild Steel in Acid Chloride Solution. International Journal of ELECTROCHEMICAL SCIENCE, 9. 3746- 3759.

Loto, Cleophas Akintoye and Joseph, O. O and Loto, C. A. and Okeniyi, Joshua Olusegun (2015) Adsorption and inhibitive properties of camellia sinensis for mild steel in 0.5M HCl and 0.8M H2SO4. NACE - International Corrosion Conference Series, 2015 (5655). pp. 1-15. ISSN 3614409

Loto, R. T. (2022) Analysis of the protection performance of admixed citronella and myrrh essential oil extracts on high carbon steel corrosion in CH3COOH and C6H8 O7 solution. Journals of materials research and technology, 21. pp. 4386-4397.

Loto, R. T. (2017) Anti-corrosion performance of the synergistic properties of benzenecarbonitrile and 5-bromovanillin on 1018 carbon steel in HCl environment. Scientific Reports.

Loto, R. T. (2018) COMPARATIVE ANALYSIS OF ELECTROCHEMICAL CORROSION BEHAVIOR AND INHIBITION OF 2101 DUPLEX AND 301 AUSTENITIC STAINLESS STEEL IN 4-CYANOBENZENE/6M H2SO4 SOLUTION. Journal of Chemical Technology and Metallurgy, 53 (2). pp. 311-323.

Loto, R. T. (2017) Comparative Analysis of the Synergistic Effect of Sodium Molybdenum Oxide and Vanillin on the Corrosion Inhibition of 3CR12 Ferritic Stainless Steel and High Carbon Steel in Dilute Hydrochloric Acid. J Bio Tribo Corros.

Loto, R. T. (2022) Comparative evaluation of the oxidation resistance of untreated, annealed and quenched 434 ferritic stainless steels in corrosive electrolytes. Cogent Engineering, 9. ISSN 4: 1376488

Loto, R. T. (2019) Comparative study of the pitting corrosion resistance, passivation behavior and metastable pitting activity of NO7718, NO7208 and 439L super alloys in chloride/sulphate media. journals of materials research and technology, 8 (1). pp. 623-629.

Loto, R. T. (2019) Comparative study of the pitting corrosionresistance, passivation behavior and metastablepitting activity of NO7718, NO7208 and 439L superalloys in chloride/sulphate media. Journal of Materials Research and Technology, 8 (1). pp. 623-629.

Loto, R. T. Correlative investigation of the corrosion susceptibility of C70600 and C26000 copper based alloys for application in seawater environment. materialstoday.

Loto, R. T. (2022) Correlative investigation of the corrosion susceptibility of C70600 and C26000 copper based alloys for application in seawater environment. materialstoday:proceedings, 65 (3). pp. 2151-2155.

Loto, R. T. (2017) Corrosion Inhibition Performance of the Synergistic Effect of Rosmarinus officinalis and 5-Bromovanillin on 1018 Carbon Steel in Dilute Acid Media. J Fail. Anal. and Preven..

Loto, R. T. (2017) Corrosion inhibition studies of the combined admixture of 1,3-diphenyl-2-thiourea and 4-hydroxy-3- methoxybenzaldehyde on mild steel in dilute acid media. Rev. Colomb. Quim., 46 (1). pp. 20-32.

Loto, R. T. (2016) Corrosion inhibition studies of the combined admixture of 1,3-diphenyl-2-thiourea and 4-hydroxy-3- methoxybenzaldehyde on mild steel in dilute acid media. UNIVERSIDADA NACIONAL DE COLOMBIA, 46 (1). pp. 20-32.

Loto, R. T. (2019) Corrosion inhibition effect of non-toxic -amino acid compound on high carbon steel in low molar concentration of hydrochloric acid. Journal of material research and technology, 8 (1). pp. 484-493.

Loto, R. T. (2017) Corrosion inhibition effect of non-toxic �-aminoacid compound on high carbon steel in low molarconcentration of hydrochloric acid. Journal of Materials Research and Technology.

Loto, R. T. (2013) Corrosion inhibition of mild steel in acidic medium by butyl alcohol. Res Chem Intermed. ISSN 0922-6168

Loto, R. T. (2017) Corrosion polarization behaviour and inhibition of S40977 stainless steel in benzosulfonazole/3 M H2SO4 solution. South African Journal of Chemical Engineering, 24. pp. 148-155.

Loto, R. T. (2019) Corrosion resistance and morphological deterioration of 316Ti austenitic, GX4CrNiMo16-5-1 martensitic and 444 ferritic stainless steels in aqueous corrosive environments. Results in Physics, 14.

Loto, R. T. (2022) Coupon data on the corrosion protection result of calcivitol on mild steel in chloride solution. materialstoday.

Loto, R. T. (2019) Effect of SO42−and Cl−anionic attack on the localized corrosion resistanceand morphology of 409 ferritic stainless steel. Results in Physics, 12. pp. 738-742.

Loto, R. T. (2017) Electrochemical Corrosion Characteristics of 439 Ferritic, 301 Austenitic, S32101 Duplex and 420 Martensitic Stainless Steel in Sulfuric Acid/NaCl Solution. J Bio Tribo Corros, 3 (24).

Loto, R. T. (2016) Electrochemical analysis of the corrosion inhibition properties of 4-hydroxy-3-methoxybenzaldehyde on low carbon steel in dilute acid media. Cogent Engineering. pp. 1-18.

Loto, R. T. (2023) Electrochemical data on the corrosion inhibition performance of admixed Citrus paradisi and Zingiber officinale oil extracts in 0.5 M H2SO4 solution. Materials Today: Proceedings. (In Press)

Loto, R. T. (2020) Evaluation of the corrosion inhibition effect of the combined admixture of rosemary and cinnamon cassia oil on mild steel in weak acid electrolyte. Sustainable Chemistry and Pharmacy.

Loto, R. T. (2016) Inhibition Effect of Butan-1-Ol on the Pitting Corrosion of Austenitic Stainless Steel (Type 304). Gazi University Journal of Science, 29 (1). pp. 19-25.

Loto, R. T. (2018) Inhibition Studies of the Synergistic Effect of Rosemary oil and Zinc oxide on S41003 Ferritic Steel Corrosion in Dilute Sulphuric and Hydrochloric Acid Solutions. ORIENTAL JOURNAL OF CHEMISTRY, 34 (1). pp. 240-254. ISSN 0970-020 X

Loto, R. T. (2022) Investigation of the protection effect of ginger, tea tree and grapefruit essential oil extracts on mild steel in 0.5M H2SO4 solution. Materials Research Express, 9.

Loto, R. T. (2015) Pitting corrosion evaluation and inhibition of stainless steels: A review. J. Mater. Environ. Sci., 6 (10). pp. 2750-2762. ISSN 2028-2508

Loto, R. T. (2013) Pitting corrosion evaluation of austenitic stainless steel type 304 in acid chloride media. J. Mater. Environ. Sci., 4 (4). 448--459. ISSN 2028-2508

Loto, R. T. (2017) Study of the synergistic effect of 2-methoxy-4-formylphenol and sodium 4 molybdenum oxide on the corrosion inhibition of 3CR12 ferritic steel 5 in dilute sulphuric acid. Results in Physics.

Loto, R. T. (2017) Study of the synergistic effect of 2-methoxy-4-formylphenol and sodium molybdenum oxide on the corrosion inhibition of 3CR12 ferritic steel in dilute sulphuric acid. Results in Physics, 7. pp. 769-776.

Loto, R. T. (2018) Surface coverage and corrosion inhibition effect of Rosmarinus officinalis and zinc oxide on the electrochemical performance of low carbon steel in dilute acid solutions. Results in Physics, 8. pp. 172-179.

Loto, R. T. and Adeleke, Adeyinka (2016) Corrosion of Aluminum Alloy Metal Matrix Composites in Neutral Chloride Solutions. J Fail. Anal. and Preven..

Loto, R. T. and Aiguwurhuo, Osazaenaye and Evana, Ukene (2016) Corrosion Resistance Study of Heat Treated 420 Martensitic Stainless Steel and 316 Austenitic Stainless Steel in Dilute Acid Concentrations. Rev. Téc. Ing. Univ. Zulia., 39 (7). 35 - 40.

Loto, R. T. and Ajuwaeze, Williams Joseph (2022) Corrosion behaviour of maize husk reinforced aluminium (1070) metal matrix composites in chloride-sulphate solution. Materials Research Express, 9.

Loto, R. T. and Alagbe, Edith Egbimhanlu. and Busari, A. A. (2023) Data analysis of the corrosion protection behavior of ginger, tea tree and grapefruit essential oil extracts on low carbon steel in H2SO4 solution. Materials Today: Proceedings.

Loto, R. T. and Babalola, P.O. (2017) Corrosion polarization behavior and microstructuralanalysis of AA1070 aluminium silicon carbide matrix composites in acid chloride concentrations. Cogent Engineering, 4.

Loto, R. T. and Babalola, P.O. (2018) Effect of alumina nano-particle size and weight content on the corrosion resistance of AA1070 aluminum chloride/sulphate solution. Results in Physics. pp. 731-737.

Loto, R. T. and Babalola, P.O. (2018) Effect of alumina nano-particle size and weight content on the corrosion resistance of AA1070 aluminum in chloride/sulphate solution. Results in Physics, 10. pp. 731-737.

Loto, R. T. and Babalola, P.O. (2019) Electrochemical analysis of SiC compositeadditions at 7.5% weight content on the corrosionresistance of monolithic aluminium alloy insulphate–chloride solution. Journal of Materials Research and Technology.

Loto, R. T. and Ikuerowo, Temitayo and Ifezue, Sophia (2022) Electrochemical action of Citrus reticulata and Pelargonium oil concentrates on 1018 carbon steel corrosion in anionic solution. Journal of Materials Research and Technology, 16. pp. 1305-1323.

Loto, R. T. and Joseph, O. O and Akanji, O. (2015) Electrochemical corrosion behaviour of austenitic stainless steel (type 304) in dilute hydrochloric acid solution. J. Mater. Environ. Sci., 6 (9). pp. 2409-2417. ISSN 2028-2508

Loto, R. T. and Loto, C. A. (2018) Anti-corrosion properties of the symbiotic effect of Rosmarinus officinalis and trypsin complex on medium carbon steel. Results in Physics, 10. pp. 99-106.

Loto, R. T. and Loto, C. A. (2017) Corrosion behaviour of S43035 ferritic stainless steel in hot sulphate/chloride solution. Journal of Materials Research and Technology.

Loto, R. T. and Loto, C. A. (2018) Corrosion behaviour of S43035 ferritic stainless steel in hot sulphate/chloride solution. Journal of Materials Research and Technology, 7 (3). pp. 231-239.

Loto, R. T. and Loto, C. A. (2019) Data on the corrosion inhibition effect of non-toxic organic derivatives on high carbon steel in dilute acid media. chemical Data Collections, 20.

Loto, R. T. and Loto, C. A. (2019) Data on the corrosion inhibition effect of non-toxic organic derivatives on high carbon steel in dilute acid media. Chemical Data Collections, 20. (Submitted)

Loto, R. T. and Loto, C. A. (2022) Inhibition Effect of Aminophen Fluid Derivative on the Corrosion of 1070 Aluminum. Solid State Phenomena, 329.

Loto, R. T. and Loto, C. A. (2015) Pitting Corrosion Inhibition of Type 304 Austenitic Stainless steel by 2�Amino�5�ethyl�1,3,4�thiadiazole in Dilute Sulphuric Acid. Protection of Metals and Physical Chemistry of Surfaces, 51 (4). pp. 693-700. ISSN 2070-2051

Loto, R. T. and Loto, C. A. (2017) Potentiodynamic Polarization Behavior and Pitting Corrosion Analysis of 2101 Duplex and 301 Austenitic Stainless Steel in Sulfuric Acid Concentrations. J Fail. Anal. and Preven..

Loto, R. T. and Loto, C. A. and Akinyele, Marvellous (2020) Effect of ginger, pomegranate and celery extractson zinc electrodeposition, surface morphology andcorrosion inhibition of mild steel. Alexandria Engineering Journal. pp. 933-941.

Loto, R. T. and Loto, C. A. and Joseph, O. O and Olanrewaju, Gabriel (2016) Adsorption and corrosion inhibition properties of thiocarbanilide on the electrochemical behavior of high carbon steel in dilute acid solutions. Elsevier, 6. pp. 305-314. ISSN 0747-5632

Loto, R. T. and Loto, C. A. and Olaitan, Akanji Lukman (2019) Evaluation of the synergistic combination effect of four chemical compounds on the corrosion inhibition of carbon steel in dilute acid solutions. Chemical Data Collections, 20.

Loto, R. T. and Loto, C. A. and Olaniran, Oladimeji (2022) Gravimetric and Statistical Analysis of Combined Protection Performance of Lavandula latifolia and Ricinus communis on Low Carbon Steel. Solid State Phenomena.

Loto, R. T. and Loto, C. A. and Onawunmi, Ayodele Samuel and Kupolati, W.K. (2015) Electrochemical and thermodynamic investigation of benzenamine as corrosion inhibitor of austenitic stainless steel (type 304) in hydrochloric acid solution. Der Pharma Chemica, 7 (10). pp. 155-168. ISSN 0975-413X

Loto, R. T. and Loto, C. A. and Popoola, A. P. I. (2012) Corrosion inhibition of thiourea and thiadiazole derivatives : A Review. Journal of Material Environment, 3 (5). pp. 885-894. ISSN 2028-2508

Loto, R. T. and Loto, C. A. and Popoola, A. P. I. (2015) Electrochemical Studies of the Inhibition Effect of 2-Dimethylaminoethanol on the Corrosion of Austenitic Stainless Steel Type 304 in Dilute Hydrochloric Acid. Silicon. ISSN 1876-990X

Loto, R. T. and Loto, C. A. and Popoola, A. P. I. (2014) Electrochemical Studies of the corrosion inhibition effect of 2-amino-5-ethyl-1,3,4-thiadiazole on low carbon steel in dilute sulphuric acid. J.Chem.Soc.Pak, 36 (6). pp. 1043-1051.

Loto, R. T. and Loto, C. A. and Popoola, A. P. I. (2015) INHIBITION EFFECT OF PHENYLAMINE ON THE CORROSION OF AUSTENITIC STAINLESS STEEL TYPE 304 IN DILUTE SULPHURIC ACID. Canadian Journal of Pure and Applied Sciences, 9 (2). pp. 3409-3422. ISSN 1920-3853

Loto, R. T. and Loto, C. A. and Popoola, A. P. I. (2015) Inhibition Effect of Deanol on Mild Steel Corrosion in Dilute Sulphuric Acid. S. Afr. J. Chem, 68. pp. 105-114.

Loto, R. T. and Loto, C. A. and Popoola, A. P. I. and Fedotova, T. (2014) Inhibition Effect of 2-Amino, 5-Ethyl- 1, 3, 4 Thiadiazole on the Corrosion of Austenitic Stainless Steel Type 304 in Dilute Sulphuric Acid. Portugaliae Electrochimica Acta, 32 (5). pp. 337-354. ISSN 1647-1571

Loto, R. T. and Loto, C. A. and Popoola, A. P. I. and Fedotova, T. (2015) Inhibition Effect of N, N'-Dimethylaminoethanol on the Pitting Corrosion Austenitic Stainless Steel Type 304. MATERIALS SCIENCE (MEDŽIAGOTYRA)., 21 (4). pp. 517-521. ISSN 1392–1320

Loto, R. T. and Loto, C. A. and Popoola, A. P. I. and Fedotova, T. (2016) Inhibition effect of 2-amino-5-ethyl-1, 3, 4-thiadiazole on corrosion behaviour of austenitic stainless steel type 304 in dilute HCl solution. J. Cent. South Univ., 23. pp. 258-268.

Loto, R. T. and Loto, C. A. and Popoola, A. P. I. and Fedotova, T. (2015) Inhibition effect of butan-1-ol on the corrosion behavior of austenitic stainless steel (Type 304) in dilute sulfuric acid. Arabian Journal of Chemistry, xxx. pp. 1-10. (In Press)

Loto, R. T. and Loto, C. A. and Popoola, A. P. I. and Kupolati, William (2016) Corrosion Inhibition Effect of N, N’-diphenylthiourea on the Electrochemical Characteristics of Mild steel in Dilute Acidic Environments. J.Chem.Soc.Pak., 38 (2). pp. 222-233.

Loto, R. T. and Loto, C. A. and Popoola, A. P. I. and Ranyaoa, M. (2012) Corrosion resistance of austenitic stainless steel in sulphuric acid. International Journal of Physical Sciences, 10. 1677 - 1688. ISSN 1992 - 1950

Loto, R. T. and Loto, Roy Olakunle and Joseph, O. O and Akinwumi, I. I. Electrochemical studies of the corrosion inhibition property of Rosmarinus officinalis on mild steel in dilute sulphuric acid. Journal of Chemical and Pharmaceutical Research, 7 (7). pp. 105-116. ISSN 0975-7384

Loto, R. T. and Loto, Roy Olakunle and Loto, C. A. (2016) A potential attenuation equation for cathodicallypolarized pipelines and risers. JMRTEC Journal of Materials Research and Technology. (In Press)

Loto, R. T. and Morenikeji, Temitayo and Charles, Idowu Ayodeji (2020) Data on the corrosion inhibition effect of 2- meracaptobenzothiazole on 316 austenitic stainless steel, low carbon steel and 1060 aluminium in dilute acid media. chemical Data Collections, 26.

Loto, R. T. and OGHENERUKEWE, EBOH (2016) Inhibition Studies of Rosmarinus Officinalis on the Pitting Corrosion Resistance 439LL Ferritic Stainless Steel in Dilute Sulphuric Acid. ORIENTAL JOURNAL OF CHEMISTRY, 32 (5). pp. 2813-2832. ISSN 0970-020 X

Loto, R. T. and Okpaleke, Presious Chukwuma and Udoh, U. (2022) Inhibition Performance of Admixed Grapefruit and Lemongrass Oil Extracts on Low Carbon Steel in Weak Acid Formulation. Advanced Manufacturing in Biological, Petroleum, and Nanotechnology Processing, Green Energy and Technology.

Loto, R. T. and Olowoyo, Oluwatobiloba (2018) Corrosion inhibition properties of the combined admixture of essential oilextracts on mild steel in the presence of SO42−anions. South African Journal of Chemical Engineering, 26. pp. 35-41.

Loto, R. T. and Olukeye, Tiwa and Okorie, Eugene (2019) Synergistic combination effect of clove essential oil extract with basil andatlas cedar oil on the corrosion inhibition of low carbon steel. South African Journal of Chemical Engineering, 30. pp. 28-41.

Loto, R. T. and Osamudiame, Omoregie and Nissi, Anthony Chisom and Oluwakayode, Odukomaiya Oluwademiladeogo and Oghoho, Uriewhu Victory and Okeke, Chukwuemeka Daniel and Smart, Ifon Princewill and Lemuel, Peter-Arome Chosen and Nwabeze, Osondu Raymond (2023) Protection Effect of Admixed Melaleuca alternifolia and Citrus paradisi Macf. Oil Extracts on High Carbon and 3310 Low Grade Alloy Steels in HCl Solution. Journal of Bio- and Tribo-Corrosion, 919.

Loto, R. T. and Ozcan, Emre (2016) Corrosion Resistance Studies of Austenitic Stainless Steel Grades in Molten Zinc-Aluminum Alloy Galvanizing Bath. Journal of Failure Analysis and Prevention, 16 (2). ISSN 1547-7029

Loto, R. T. and Popoola, A. P. I. and Olaitan, Akanji Lukman (2015) Synergistic effect p-phenylenediamine and n,n diphenylthiourea on the electrochemical corrosion behaviour of mild steel in dilute acid media. Int J Ind Chem, 7.

Loto, R. T. and Solomon, Moses M. (2023) Application of ginger and grapefruit essential oil extracts on the corrosion inhibition of mild steel in dilute 0.5 M H2SO4 electrolyte. Scientific African, 19.

Loto, R. T. and Tobilola, Olukeye (2016) Corrosion inhibition properties of the synergistic effect of 4-hydroxy-3-methoxybenzaldehyde and hexadecyltrimethylammoniumbromide on mild steel in dilute acid solutions. Journal of King Saud University – Engineering Sciences. pp. 1-7.

Lukman, Akanji Olaitan and Abiodun, Obadele Babatunde and Sadiku-Agboola, O. and Popoola, A. P. I. and Sadiku, Rotimi Emmanuel (2012) Modeling and Simulation of Hydrogen Storage Device for Fuel Cell Plant. J. Chem. Chem. Eng., 6. pp. 604-612.

MOHAMMED, H. ALSHARIF and Anabi, Hilary Kelechi and SUNGHWAN, KIM and IMRAN, KHAN and JEONG, KIM and JIN, HONG KIM (2019) Enabling Hardware Green Internet of Things: A review of Substantial Issues. IEEE Access, XX.

Majolagbe, S. B. and Abioye, Abiodun A. and Akinluwade, K. J. and Adesina, Olumide S and Adetunji, Adelana Razak (2015) Radiation Effects: Recommendations for Safe Plasma/Flame Cutting Operation. Journal of Scientific Research & Reports, 6 (3). pp. 237-242. ISSN 2320-0227

Malatji, N. and Popoola, A. P. I. and Fayomi, O. S. I (2017) The effect of nanoparticulate loading on the fabrication and characterization of multi-doped Zn-Al2O3-Cr2O3 hybrid coatings on mild steel. Int J Adv Manuf Technol, 90. pp. 2443-2452.

Malatji, N. and Popoola, A. P. I. and Fayomi, O. S. I and Loto, C. A. (2016) Multifaceted incorporation of Zn-Al2O3/Cr2O3/SiO2 nanocomposite coatings: anti-corrosion, tribological, and thermal stability. The International Journal of Advanced Manufacturing Technology, 82 (5-8). pp. 1335-1341.

Mamudu, Angela Onose and Imokhe, Omolegho and Okoro, Emeka Emmanuel and Olabode, O.A. (2017) The Comparative Analysis of Bonny Light& Bonny Medum Crude Oil Using Simple Distillation and Preflash Model For Maximum Distillate Cuts Recovery (Crude Oil Topping Refinery). International Journal of Applied Engineering Research, 12 (18). pp. 7372-7391. ISSN 0973-4562

Mamudu, Angela Onose and Okonkwo, Ebenezer and Okocha, Stephen I. and Okoro, Emeka Emmanuel and Elehinafe, Francis and Igwilo, K. C. (2019) The Design of an Integrated Crude Oil Distillation Column with Submerged Combustion Technology. The Open Chemical Engineering Journal, 13. pp. 7-22.

Mansouri, Iman and Mortazavi, Seyed Javad and Manfredi, Maeve and Awoyera, P. O. (2023) Development of New Material Models for Thermal Behavior of Cold-Formed G-450 and G-550 Steels in OpenSees Software. Journal of Architectural Engineering, 29 (2).

Matsimbe, Jabulani and Dinka, Megersa and Olukanni, D. O. and Musonda, Innocent (2022) A Bibliometric Analysis of Research Trends in Geopolymer. Materials.

Matsimbe, Jabulani and Dinka, Megersa and Olukanni, D. O. and Musonda, Innocent (2022) Geopolymer: A systematic review of methodologies. Materials.

Matthew, Simeon and Wara, S.T. and Adejumobi, I. A. and Amuta, Elizabeth (2018) Minimization of Active Transmission Loss in Power Systems using Static Var Compensator. International Journal of Applied Engineering Research, 13 (7). pp. 4951-4959. ISSN 0973-4562

Matthews, V. O. and Adekitan, Aderibigbe I. and Uzairue, Stanley Idiake and Noma- Osaghae, Etinosa (2018) Wireless Intelligent Electricity Metering and Billing System (WIMBIS). International Journal of Engineering and Techniques, 4 (4). pp. 57-61. ISSN 2395-1303

Matthews, V. O. and Adekitan, Aderibigbe I. and Uzairue, Stanley Idiake and Noma-Osaghae, Etinosa (2018) Wireless Intelligent Electricity Metering and Billing System (WIMBIS). Wireless Intelligent Electricity Metering and Billing System (WIMBIS), 4 (4). pp. 57-61. ISSN 2395-1303

Matthews, V. O. and Noma-Osaghae, Etinosa and Uzairue, Stanley Idiake (2018) An Analytics Enabled Wireless Anti-Intruder Monitoring and Alarm System. IJSRSET, 4 (9). 05-11. ISSN 2394-4099

Matthews, V. O. and Noma-Osaghae, Etinosa and Uzairue, Stanley Idiake (2018) RFID Enabled Arms and Ammunition Depot Management System with Human Tracking Capacity. International Journal of Scientific & Engineering Research, 9 (7). pp. 166-171. ISSN 2229-5518

Matthews, V. O. and Osafehinti, Osafehinti and Adetiba, E. and Ike, D. N. (2013) A Covert Kidnapping Alert and Location Identifier (CKALI). NTERNATIONAL J OURNAL OF I NNOVATIVE T ECHNOLOGY AND C REATIVE E NGINEERING , 3 (12). pp. 1-11. ISSN 2045 - 8711

Matthews, V. O. and Popoola, Segun I. and Adetiba, E. and Badejo, J. A. and Atayero, A. A. (2017) Cost-Effective Medical Robotic Telepresence Solution using Plastic Mannequin. International Journal of Electrical and Computer Engineering (IJECE), 7 (3). pp. 1212-1218. ISSN 2088-8708

Matthews, V. O. and Popoola, Segun I. and Atayero, A. A. and Badejo, J. A. and Adetiba, E. (2017) Sustainable Mannequin Robotic Telepresence for Maternal Mortality Reduction in Sub-Saharan Africa. Asian Journal of Information Technology, 16 (1). pp. 138-147. ISSN 1682-3915

Matthews, V. O. and Uzairue, Stanley Idiake and Etinosa-Okankan, O. J and Uzairue, Stanley Idiake and Enefiok, Morgan Kubiat (2018) Implementation of a Community Emergency Security Alert System. International Journal of Innovative Science and Research Technology, 3 (6). pp. 475-483. ISSN 2456-2165

Matthews, V. O. and Uzairue, Stanley Idiake and Noma-Osaghae, Etinosa (2018) Analysis and Implementation of Fiber to the Home Network Using Peace Estate Lagos as a Case Study. International Journal of Science Technology Management and Research, 3 (8). pp. 1-4. ISSN 2456-0006

Matthews, V. O. and Uzairue, Stanley Idiake and Noma-Osaghae, Etinosa and Nwukor, Frances (2018) Design and Simulation of a Smart Traffic System in a Campus Community. Journal of Emerging Technologies and Innovative Research (JETIR), 5 (7). pp. 492-497. ISSN 2349-5162

Mbada, Ndubuisi I. and Atanda, P. O. and Aponbiede, O. and Abioye, Abiodun A. and Ugbaja, Michael I. and Alabi, Ayomide Samuel (2016) Performance Evaluation of Suitability of Carbonized Palm Kernel Shell (PKS) as a Veritable Alternative to Coal and Charcoal in Solid Fuel Fired Furnaces. International Journal of Metallurgical Engineering, 5 (1). pp. 15-20.

Meko, Bikila and Ighalo, Joshua and Ofuyatan, Olatokunbo M. (2021) Enhancement of self-compactability of fresh self-compacting concrete: A review. Cleaner Materials.

Michael, E. and Liman, A.D. and Adimula, G.M. and Fajobi, M. A. and Abioye, Abiodun A. (2018) Development of Automatic Switch using PIR and SSR for Day and Night Detection. Covenant Journal of Engineering Technology (CJET), 1 (1). pp. 47-57.

Modupe, A.E. and Atoyemi, Olumoyewa Dotun and Oluwatuyi, O. E. and Aladegboye, O.J. and Busari, A. A. and Basorun, A.O. (2018) Dataset ofmechanical,marshallandrheological properties of crumbrubber – Bio-oil modified hot mix asphalt fo rsustainable pavemen tworks. Data inBrief.

Monyai, T. and Fayomi, O. S. I and Popoola, A. P. I. (2016) A Novel Effect of Solanum Tuberosum/Zn-30Al-7Ti Sulphate Modified Coating on UNS G10150 Mild Steel Via Dual-anode Electrodeposition Route. Portugaliae Electrochimica Acta, 34 (5). pp. 355-363. ISSN 1647-1571

Mortazavi, Seyed Javad and Mansouri, Iman and Awoyera, P. O. and Hu, Jong Wan (2022) Comparison of thermal performance of steel moment and eccentrically braced frames. Journal of Building Engineering, 49.

Mosobalaje, O. O. and Orodu, O. D. and Ogbe, D. (2019) Descriptive statistics and probability distributions of volumetric parameters of a Nigerian heavy oil and bitumen deposit. Journal of Petroleum Exploration and Production Technology. pp. 645-661.

Mydin, Md Azree Othuman and Abdullah, Mohd Mustafa Al Bakri and Sor, Nadhim Hamah and Omar, Roshartini and Dulaimi, Anmar and Awoyera, Paul Oluwaseun and Althoey, Fadi and Deifalla, Ahmed Farouk (2023) Thermal conductivity, microstructure and hardened characteristics of foamed concrete composite reinforced with raffia fiber. Journal of materials research and technology, 26. pp. 850-640.

Mydin, Md Azree Othuman and Khalid, Mohamad Sukeri and Omar, Roshartini and Najm, Hadee Mohammed and Qaidi, Shaker Mahmood Abdal and Awoyera, P. O. (2023) Durability Properties of Lightweight Foamed Concrete Reinforced With ‘Musa Acuminate’ Fibre. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 145-158. ISSN 145-158

Mydin, Md Azree Othuman and Khalid, Mohamad Sukeri and Omar, Roshartini and Najm, Hadee Mohammed and Qaidi, Shaker Mahmood Abdal and Awoyera, P. O. (2023) Influence of Crisscross Fiberglass Strip on Axial Compressive Strength of Lightweight Foamed Concrete. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 135-144.

Mydin, Md Azree Othuman and Majeed, Samadar Salim and Omar, Roshartini and Awoyera, P. O. and Najm, Hadee Mohammed (2023) Sustainable lightweight foamed concrete using hemp fibre for mechanical properties improvement. Journal of Advanced Research in Applied Mechanics, 101 (1). pp. 19-35. ISSN 2829-7895

Mydin, Md Azree Othuman and Nawi, Mohd Nasrun Mohd and Omar, Roshartini and Najm, Hadee Mohammed and Awoyera, P. O. (2023) Studies on durability properties of natural fibre-reinforced green lightweight foamed concrete employing industrial hemp fibres. Journal of Advanced Research in Applied Mechanics, 10 (1). pp. 36-52.

Naje, Ahmed Samir and Chelliapan, Shreeshivadasan and Zakaria, Zuriati and Ajeel, Mohammed A. and Alaba, Peter Adeniyi (2016) A review of electrocoagulation technology for the treatment of textile wastewater. Rev Chem Eng. pp. 1-30.

Nchila, Yuven Thelma and Ogunkunle, Fred T. and Rachael, Josephs E. and Olabode, O.A. and Dinga, Christian N. (2022) Gas Condensate Reservoir Developmental Techniques. Bioenergy and Biochemical Processing Technologies. pp. 377-393.

Nduka, David and Ameh, Oko John and Joshua, Opeyemi and Ojelabi, Rapheal A. (2018) Awareness and Benefits of Self-Curing Concrete in Construction Projects: Builders and Civil Engineers Perceptions. buildings, 8. pp. 1-16.

Nduka, David and Ogunbayo , Babatunde F and Ajao, Adekunle M and Ogundipe , Kunle and Babalola, Benjamin (2018) Survey datasets on sick building syndrome: Causes and effects on selected public buildings in Lagos, Nigeria. Data in Brief, 20. pp. 1340-1346.

Nduka, David and Olawuyi, B. J and Fagbenle, Olabosipo I. and Fonteboa, Belén G. (2022) Assessment of the Durability Dynamics of High-Performance Concrete Blended with a Fibrous Rice Husk Ash. Crystals, 12.

Nduka, David and Olawuyi, B. J and Fagbenle, Olabosipo I. and Fonteboa, Belén G. (2021) Effect of KyAl4(Si8-y) O20(OH)4 Calcined Based-Clay on the Microstructure and Mechanical Performances of High-Performance Concrete. Crystals, 11.

Nduka, David and Sotunbo, Adeboyega S. and Ibrahim, Idris Adedapo and Joshua, Opeyemi and Tunji-Olayeni, P .F and Akinbile, Bolatito (2018) Survey dataset on professional's perception on site supervision and project performance. Data in Brief, 18. pp. 1758-1764.

Ngene, Ben U. and Agunwamba, J. C and Nwachukwu, B.A. and Okoro, B. C. (2015) The Challenges to Nigerian Raingauge Network Improvement. Research Journal of Environmental and Earth Sciences, 7 (4). pp. 68-74. ISSN 2041-0492

Ngene, Ben U. and Ede, A. N. and Bamigboye, Gideon and Prashant, Kumar and Boulent, Imam (2017) Environmental Effect of Climate Change Pollutants Loading on Structural Steel Stresses. International Journal of Applied Engineering Research, 12 (14). pp. 4147-4183. ISSN 0973-4562

Ngene, Ben U. and Nwafor, C. O. and Bamigboye, Gideon and Ogbiye, S. A. and Ogundare, J. O. and Akpan, V. E. (2021) Assessment of water resources development and exploitation in Nigeria: A review of integrated water resources management approach. Heliyon, 7.

Nguyen, Binh V. and Afolabi, Richard Oyekunle and Kim, Kiseon (2013) Dependence of Outage Probability of Cooperative Systems with Single Relay Selection on Channel Correlation. IEEE COMMUNICATIONS LETTERS, 17 (11). pp. 2060-2063.

Noguera, J and Ayeni, Folusho and Okuboyejo, Sena and Adusumilli, S (2017) Towards a Web-based Adaptive and Intelligent Tutoring System. International Journal of Computing and Informatics, 1 (1). ISSN 2502-2334

Noma-Osaghae, Etinosa and Okokpujie, Kennedy O. and Famoroti, Daniel and John, S. N. (2022) THE VALIDITY OF A DECENTRALISED SIMULATION-BASED SYSTEM FOR THE RESOLUTION OF ROAD TRAFFIC CONGESTION. Journal of Applied Engineering Science, 20 (3). pp. 821-830. ISSN 1451-4117

Noma-Osaghae, Etinosa and Okokpujie, Kennedy O. and Ndujiuba, Charles Uzoanya and Olatunji, Okesola and Okokpujie, Imhade P. (2018) Epidemic Alert System: A Web-based Grassroots Model. International Journal of Electrical and Computer Engineering (IJECE) , 8 (5). 3809 -3828. ISSN 2088-8708

Nwankwo, C.O and Bamigboye, Gideon and Davies, I.E.E and Michaels, T.A (2020) High volume Portland cement replacement: A review. Construction and Building Materials, 2 (60).

Nwankwo, C.O and Mahachi, Jeffrey and Olukanni, D. O. and Musonda, Innocent (2023) Natural fibres and biopolymers in FRP composites for strengthening concrete structures: A mixed review. Construction and Building Materials, 363.

Nwanya , Stephen and Ajayi, O. O. and Achebe , Celestine (2016) Process Variability Analysis of License Vehicle Number Plate Production in Nigeria. Proceedings - International Conference on Industrial Engineering and Operations Management, Kuala Lumpur, Malaysia, March 8-10, 2016.

Nwanya , Stephen and Udofia, J.I and Ajayi, O. O. (2017) Optimization of machine downtime in the plastic manufacturing. Cogent Engineering, 4 (1).

Nzanzu, Vingi Patrick and Adetiba, E. and Badejo, J. A. and Molo, Mbasa Joaquim and Takenga, Claude and Noma-Osaghae, Etinosa and Oguntosin, V. and Suraju, Sadeeq (2022) Monitoring and resource management taxonomy in interconnected cloud infrastructures: a survey. TELKOMNIKA Telecommunication, Computing, Electronics and Control, 20 (2). pp. 279-295. ISSN 1693-6930

OGUNFUNMI, TOKUNBO and Covenant University, Public Lecture (2015) TECHNOLOGY CONVERGENCE AND THE PROMISE OF INTERNET OF THINGS: PROSPECTS FOR DEVELOPING ECONOMIES. Covenant University 41st Public Lecture, 4 (3). pp. 1-64. ISSN 2006...0327

OLAFADEHAN, O. A. and Adewumi, M. K. and Busari, A. A. (2013) Performance of traditionally-managed Bunaji (White Fulani) cattle under smallholder dairy production systems in Oyo State, South-West, Nigeria. Nigerian Journal of Animal Production, 40 (1).

OLAFADEHAN, O. A. and Akpo, O. Y. and Enemuo, O. and Amoo, Kehinde O. and Abatan, Olubunmi G. (2018) Equilibrium, kinetic and thermodynamic studies of biosorption of zinc ions from industrial wastewater using derived composite biosorbents from walnut shell. African Journal of Environmental Science and Technology, 12 (9). pp. 335-356. ISSN 1996-0786

OLAYIWOLA, JOY OLUWABUKOLA and Badejo, J. A. and Okokpujie, Kennedy O. and Awomoyi, Morayo E. (2023) Lung-Related Diseases Classification Using Deep Convolutional Neural Network. Mathematical Modelling of Engineering Problems, 10 (4). pp. 1097-1104.

Obaju, B.N and Fagbenle, Olabosipo I. and Amusan, L. M. and Musa, Shamsudeen (2022) Building technology training and student work readiness. International Journal of Advanced and Applied Sciences, 9 (12). pp. 145-151.

Obanla, O. R. and Bababtunde, D. E. and Ogunbiyi, Ajibola T and Oladimeji, Temitayo E, and Ifepe, M. I. (2018) Biodiesel Washing Water Treatment Using Zeolite and Activated Carbon as Adsorbents. International Journal of Engineering and Applied Sciences (IJEAS), 5 (3). pp. 124-126. ISSN 2394-3661

Obanla, O. R. and Udonne, Joseph Denis and Ajani, Olayinka O. and Ayeni, .A. O. and Mohammed, Faruk (2019) Preliminary Assessment on the Effect of Bentonite and Ibeshe Clay on Bleaching of Rubber (Hevea Brasiliensis) Seed Oil. International Journal of Recent Technology and Engineering (IJRTE), 8 (3). pp. 12274-12278. ISSN 2277-3878

Odigwe, I. A. and Ologun, O. O. and Olatokun, O.A. and Awelewa, A. A. and Agbetuyi, Ayoade F. and Samuel, I. A. (2013) A microcontroller-based Active Solar Water Heating System for Domestic Applications. INTERNATIONALJOURNAl of RENEWABlE ENERGY RESEARCH, 3 (4). pp. 837-845.

Odunfa, K. M. and Fagbenle, R. O. and Oluwole, O. O. and Ohunakin, O.S. (2014) MODELING OF THINLIQUID FALLINGFILM IN H2O-LiBr AND H2O-LiCl ABSORPTION REFRIGERATION SYSTEMS. Canadian Journal of Pure and Applied Sciences, 8 (2). pp. 2933-2942. ISSN 1920-3853; Print ISSN: 1715-9997

Odunfa, K. M. and Fagbenle, R. O. and Oyewola, Olanrewaju M. and Ohunakin, O.S. (2014) Magnetic Field Enhancement in Ammonia-Water Absorption Refrigeration Systems. Energy and Power Engineering. pp. 54-68.

Odunfa, K. M. and Ojo, T. O. and Odunfa, V.O. and Ohunakin, O.S. (2015) Energy Efficiency in Building: Case of Buildings at the University of Ibadan, Nigeria. Journal of Building Construction and Planning Research, 3. pp. 18-26.

Odunlami, O. A. and Elehinafe , F. Boluwaji and Oladimeji, Temitayo E, and Fajobi, M. A. and Okedere, O.B and Fakinle, B. S. (2018) Implications of Lack of Maintenance of motorcycles on Ambient Air Quality. International Journal of Mechanical Engineering and Technology (IJMET), 9 (9). 647 -654. ISSN 0976-6359

Odunlami, O. A. and Odiakaose, Ebubechukwu Olive and Owoicho, Isaac Alfa and Oladimeji, Temitayo E, and Elehinafe, F. Boluwaji (2022) TREATMENT OF OIL SPILLS WITH NATURAL SORBENTS: A REVIEW. International Journal of Recent Research in Physics and Chemical Sciences, 9 (1). pp. 16-25. ISSN 2350-1030

Ofuyatan, Olatokunbo M. and Adedeji, Adeola A. and Nurain, Sulymon and Ede, A. N. and Oyebisi, S.O and Alayande, T and Ogundipe, John (2018) PSEUDO-DYNAMIC EARTHQUAKE RESPONSE MODEL OF WOOD-FRAME WITH PLASTERED TYPHA (MINIMA) BALE MASONRY-INFILL. International Journal of Civil Engineering and Technology (IJCIET), 9 (2). pp. 27-35. ISSN 0976-6316

Ofuyatan, Olatokunbo M. and Adeniyi, Adewale George and Ijie, David and Ighalo, Joshua O. and Oluwafemi, John (2022) Development of high-performance self compacting concrete using eggshell powder and blast furnace slag as partial cement replacement Gender Implications. Construction and Building Materials.

Ofuyatan, Olatokunbo M. and Agbawhe, Oghaleoghene B. and Omole, D. O. and Igwegbe, Chinenye A. and Ighalo, Joshua (2022) RSM and ANN modelling of the mechanical properties of self-compacting concrete with silica fume and plastic waste as partial constituent replacement. Cleaner Materials, 4. pp. 1-9.

Ofuyatan, Olatokunbo M. and Enoch, Kayode-Thomas and Ogundeji, Oluwafuminiyi and Omole, D. O. (2022) Marble waste and recycled concrete aggregates in self compacting concrete (SSC): an evaluation of fresh and hardened properties. Australian Journal of Civil Engineering.

Ofuyatan, Olatokunbo M. and Olawale, Simon and Ede, A. N. and Oyebisi, S.O and Oluwafemi, John and Alayande, T (2018) PREDICTION OF COLLAPSED LOAD OF STEEL COLUMNS USING FINITE STRIP METHOD. International Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 347-357. ISSN 0976-6316

Ofuyatan, Olatokunbo M. and Olutoge, F. A. and Omole, D. O. and Babafemi, A. J (2021) Influence of palm ash on properties of light weight self-compacting concrete. Technology, 4.

Ogali, Oscar I. and Orodu, O. D. (2022) Fault characterization and flow barrier detection using capacitance-resistance model and diagnostic plots. Journal of Petroleum Science and Engineering, 209.

Ogbiye, S. A. and Emenike, PraiseGod C and Tenebe, I.T. and Kafi, C.Omolola (2018) Human health risk assessment data of trace elements concentration in tap water—Abeokuta South, Nigeria. Data in Brief , 18. pp. 1416-1426.

Ogbonnaya, Mercy and Ajayi, O. O. and Waheed, M. A. and Salawu, Enesi Y. (2022) Thermophysical Properties and Heat Transfer Characteristics of Nanorefrigerants: Some Existing Results and Areas for Further Researches. Scientific.Net, 917. pp. 207-227.

Ogbonnaya, Mercy and Onoroh, Francis and Ajayi, O. O. and Agun, Achem Daniel and Toluwalagbara, Samuel (2022) The Influence of Nanoparticle Additive on the Thermophysical Properties of Bionanolubricant Using Castor Oil. Scientific.Net. pp. 228-238.

Oghome, P. and Amanze, K.O. and Kamalu, Ikenna C. and Nkwocha, A.C and Opebiyi, S.O. (2012) COMPARATIVE ANALYSIS OF OXALIC ACID PRODUCED FROM RICE HUSK AND PADDY. International Journal of Engineering Science and Technology, 4 (9). pp. 4196-4203. ISSN 0975-5462

Oghome, P. and Kamalu, Ikenna C. (2012) Kinetics Of Ethanol Production From Nypa Palm (Mangroves Palm) Through Fermentation Process. International Journal of Engineering Research and Applications, 2 (6). pp. 539-549. ISSN 2248-9622

Oguamah, Ifeanyi and Ogunkunle, Temitope and Oseh, Jeffrey (2015) Effect of Matrix Acidizing on The Performance of Selected Niger Delta Reservoirs. International Journal of Oil, Gas and Coal Engineering, 3 (2). pp. 18-23. ISSN 2376-7677

Ogunbayo, Babatunde F and Aigbavboa, Clinton and Amusan, L. M. and Ogundipe, Kunle Elizah and Akinradewo, O. I. (2021) Appraisal of facility provisions in public-private partnership housing delivery in southwest Nigeria. African Journal of Reproductive Health, 25 (5).

Ogunbayo , Babatunde F and Ajao, Adekunle M and ALAGBE, Oluwole T. and Ogundipe , Kunle Elizah and Tunji-Olayeni, P .F and Ogunde, Ayodeji (2018) RESIDENTS’ FACILITIES SATISFACTION IN HOUSING PROJECT DELIVERED BY PUBLIC PRIVATE PARTNERSHIP (PPP) IN OGUN STATE, NIGERIA. International Journal of Civil Engineering and Technology (IJCIET), 9 (1). pp. 562-577. ISSN 0976-6316

Ogunbayo , Babatunde F and Ajao, Adekunle M and Ogundipe , Kunle Elizah and Joshua, Opeyemi and Durotoye, Taiwo Omowunmi and Bamigboye, Gideon (2018) Study of aggregate dormancy and its effects on the properties of aggregates and concrete. Cogent Engineering, 5. pp. 1-11.

Ogunde, Ayodeji and Ademola, A. and Omuh, I. O. and Owolabi, J. D and Ayedun, C. A. and OGUNDE, Abisola (2018) INTEGRATION OF SOFTWARE TO IMPROVE THE QUALITY OF PROJECT DELIVERY: HOW EFFECTIVE? International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 660-668. ISSN 0976-6359

Ogunde, Ayodeji and Akuete, Eseohe and Joshua, Opeyemi and BAMIDELE, Ebenezer and Amusan, L. M. and OGUNDE, Abisola (2017) PROJECT MANAGEMENT A PANACEA TO IMPROVING THE PERFORMANCE OF CONSTRUCTION PROJECTS IN OGUN STATE, NIGERIA. International Journal of Civil Engineering and Technology (IJCIET), 8 (9). pp. 1234-1242. ISSN 0976-6316

Ogunde, Ayodeji and Ayodele, Rachael and Joshua, Opeyemi and Nduka, David and OGUNDE, Abisola and Ogundipe , Kunle Elizah and Ogunbayo , Babatunde F and Ajao, Adekunle M (2018) Data on factors influencing the cost,time performance of the Industrialized Building System. Data in Brief, 18. pp. 1394-1399. ISSN 2352-3409

Ogunde, Ayodeji and Babalola, Funsho and Akinola, Gbemisola Ajoke and Ogundipe , Kunle Elizah and Ademola, , Sakariyau Adeboye and Akuete, Eseohe and Olaniran, Hezekiah Farayola (2017) The Utilization of Building Information Modeling In Nigerian Construction Industry: Challenges and Prospects. Proceedings of the 29th International Business Information Management Association Conference. pp. 4385-4401.

Ogunde, Ayodeji and Dafe , Odje Emmanuel and Akinola, Gbemisola Ajoke and Ogundipe , Kunle Elizah and Oloke , O. C. and Ademola, , Sakariyau Adeboye and Akuete, Eseohe and Olaniran, Hezekiah Farayola (2017) Factors Militating Against Prompt Delivery of Construction Projects in Lagos Megacity, Nigeria: Contractors’ Perspective. Mediterranean Journal of Social Sciences, 8 (3). pp. 233-242. ISSN ISSN 2039-2117 (online) ISSN 2039-9340 (print)

Ogunde, Ayodeji and Olaolu, O. and Afolabi, A.O. and Owolabi, J. and Ojelabi, Rapheal A. (2017) CHALLENGES CONFRONTING CONSTRUCTION PROJECT MANAGEMENT SYSTEM FOR SUSTAINABLE CONSTRUCTION IN DEVELOPING COUNTRIES: PROFESSIONALS PERSPECTIVES (A CASE STUDY OF NIGERIA). Journal of Building Performance, 8 (1). pp. 1-11. ISSN 2180-2106

Ogunde, Ayodeji and Owolabi, J. D and Olusola, K. O and Tunji-Olayeni, P .F and Amusan, L. M. and Joshua, Opeyemi and Akhigbe, A. O (2016) Factors Affecting the Competencies and Project Delivery of Small-Sized Indigenous Construction Firms in Lagos State. Covenant Journal of Research in the Built Environment (CJRBE), 4 (1).

Ogundipe , Kunle Elizah and Ogunbayo , Babatunde F and Ajao, Adekunle M and Ogundipe, Uyoyoghene Love and Tunji-Olayeni, P .F (2018) Survey data set sonc ategories of factors militating against safety practice son construction sites. Data in Brief, 19. pp. 2071-2078. ISSN 2352-3409

Ogunkunle, T.F. and Isehunwa, Sunday and Orodu, O. D. and Seteyeobot, Ifeanyi (2018) Uncertainty assessment of onset sand prediction model for reservoir applications. Cogent Engineering. pp. 1-14. ISSN 4: 1376488

Ogunsina, B.S and Ojolo, S.J and Ohunakin, O.S. and Oyedeji, O.A. and Matanmi, K.A. (2014) Pyrolytic conversion of spent palm fruit bunches into bio-fuels. JOMAR, 8 (1 & 2). 50- 60. ISSN 1597-3204

Ohunakin, O.S. (2011) Assessment of wind energy resources for electricity generation using WECS in North-Central region, Nigeria. Renewable and Sustainable Energy Reviews, 15. pp. 1968-1976.

Ohunakin, O.S. (2010) Energy Utilization and Renewable Energy Sources in Nigeria. Journal of Engineering and Applied Sciences, 5 (2). pp. 171-177. ISSN 1816-949X

Ohunakin, O.S. (2011) Wind resource evaluation in six selected high altitude locations in Nigeria. Renewable Energy, 36. pp. 3273-3281. ISSN 09601481

Ohunakin, O.S. (2011) Wind resources in North-East geopolitical zone, Nigeria: An assessment of the monthly and seasonal characteristics. Renewable and Sustainable Energy Reviews, 15. pp. 1977-1987.

Ohunakin, O.S. and Adaramola, Muyiwa S and Oyewola, Olanrewaju M. (2011) Wind energy evaluation for electricity generation using WECS in seven selected locations in Nigeria. Applied Energy, 88. pp. 3197-3206.

Ohunakin, O.S. and Adaramola, Muyiwa S and Oyewola, Olanrewaju M. and Fagbenle, R. O. (2013) Generation of a typical meteorological year for north–east, Nigeria. Elsevier, 112. pp. 152-159. ISSN 0747-5632

Ohunakin, O.S. and Adaramola, Muyiwa S and Oyewola, Olanrewaju M. and Fagbenle, R. O. (2014) Solar energy applications and development in Nigeria: Drivers and barriers. RenewableandSustainableEnergyReviews. pp. 294-301.

Ohunakin, O.S. and Adaramola, Muyiwa S and Oyewola, Olanrewaju M. and Matthew, Olaniran J. and Fagbenle, R. O. (2015) The effect of climate change on solar radiation in Nigeria. ScienceDirect, 116. pp. 272-286.

Ohunakin, O.S. and Leramo, R.O. and Abidakun, O.A. and Odunfa, Moradeyo K. and Bafuwa, O. T. (2013) Energy and Cost Analysis of Cement Production Using the Wet and Dry Processes in Nigeria. Energy and Power Engineering. pp. 537-559.

Ohunakin, O.S. and Ojolo, S.J and Ajayi, O. O. (2011) Small hydropower (SHP) development in Nigeria: An assessment. Renewable and Sustainable Energy Reviews, 15. pp. 2006-2013.

Ohunakin, O.S. and Oyewola, Olanrewaju M. and Adaramola, Muyiwa S (2013) Economic analysis of wind energy conversion systems using levelized cost of electricity and present value cost methods in Nigeria. International Journal of Energy and Environmental Engineering, 4 (2). ISSN 2251-6832

Ojelabi, Rapheal A. and Afolabi, A.O. and Omuh, I. O. and Tunji-Olayeni, P .F (2019) ASSESSMENT OF BLENDED LEARNING EDUCATION MODEL: UPTAKE AND REASONS FOR ITS IMPLEMENTATION IN CONSTRUCTION EDUCATION. Interdependence between Structural Engineering and Construction Management. ISSN 978-0-9960437-6-2

Ojelabi, Rapheal A. and Afolabi, A.O. and Omuh, I. O. and Tunji-Olayeni, P .F (2018) EXPLORING SOCIAL-ENTREPRENEURS’CONTRIBUTION IN SOCIAL INFRASTRUCTURAL PROCUREMENT IN DEVELOPING SUSTAINABLE COMMUNITIES. International Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 1424-1433. ISSN 0976-6316

Ojelabi, Rapheal A. and Afolabi, A.O. and Oyeyipo, Opeyemi and Tunji-Olayeni, P .F and AdewalE, Bukola A. (2018) Data exploration of social client relationship management(CRM 2.0)adoption in the Nigerian construction business. Data in Brief, 18. 1471-1476.

Ojelabi, Rapheal A. and Afolabi, A.O. and Oyeyipo, Opeyemi and Tunji-Olayeni, P .F and Adewale , B. A. (2018) Data exploration of social client relationship management (CRM2.0) adoption in the Nigerian construction business. Data in Brief, 18. pp. 1471-1476.

Ojelabi, Rapheal A. and Fagbenle, Olabosipo I. and Amusan, L. M. and Afolabi, A.O. (2019) GOVERNMENT ROLES IN PUBLIC-PRIVATE PARTNERSHIPS PROCUREMENT OF INFRASTRUCTURES: THEORETICAL APPROACH. Interdependence between Structural Engineering and Construction Management. pp. 1-6.

Ojelabi, Rapheal A. and Omuh, I. O. and Afolabi, A.O. and Tunji-Olayeni, P .F (2019) ASSESSMENT OF BUILDING INFORMATION MODELING UPTAKE IN THE MANAGEMENT OF CONSTRUCTION PROJECTS. Interdependence between Structural Engineering and Construction Management. pp. 1-6.

Ojelabi, Rapheal A. and Oyeyipo, Opeyemi and Afolabi, A.O. (2017) Built Environment Professionals' Perceptions of the Effectiveness of Building Control Measures in Lagos State. Journal of Construction in Developing Countries , 22 (1). pp. 41-54. ISSN Print ISSN: 1823-6499 Online ISSN: 2180-4222

Ojelabi, Rapheal A. and Oyeyipo, Opeyemi and Afolabi, A.O. and Amusan, L. M. (2018) Presence of Social Client Relationship Management within the Nigerian Construction Industry. Buildings. pp. 1-15.

Ojelabi, Rapheal A. and Oyeyipo, Opeyemi and Afolabi, A.O. and Omuh, I. O. (2020) Evaluating barriers inhibiting investors participation in Public-Private Partnership project bidding process using structural equation model. INTERNATIONAL JOURNAL OF CONSTRUCTION MANAGEMENT. pp. 1-11.

Ojewande, Olasunkanmi and Ndujiuba, Charles Uzoanya and Adelakun, A. and Popoola, Segun I. and Atayero, A. A. (2020) Negative resistance amplifier circuit using GaAsFET modelled single MESFET. TELKOMNIKA Telecommunication, Computing, Electronics and Control, 18 (1). pp. 179-190. ISSN 1693-6930

Ojewumi, M. E. and Adedokun, Samuel Oluwafunsho and Omodara, O. J. and Oyeniyi, Esther Adenike and Taiwo, O. S. and Ojewumi, E.O. (2017) Phytochemical and Antimicrobial Activities of the Leaf Oil Extract of Mentha Spicata and its Efficacy in Repelling Mosquito. International Journal of Pharmaceutical Research & Allied Sciences, 6 (4). pp. 17-27. ISSN 2277-3657

Ojewumi, M. E. and Akwayo, Iniobong Job and Taiwo, O. S. and Obanla, Oyinlola Mopelola and Ayoola, A. A. and Ojewumi, E.O. and Oyeniyi, Esther Adenike (2018) Bio-Conversion of Sweet Potato Peel Waste to BioEthanol Using Saccharomyces Cerevisiae. Bio-Conversion of Sweet Potato Peel Waste to BioEthanol Using Saccharomyces Cerevisiae , 8 (3). pp. 46-54. ISSN (Online) 2249-6084 (Print) 2250-1029

Ojewumi, M. E. and Emetere, Moses and Babatunde, Damilola Elizabeth and Okeniyi, Joshua Olusegun (2017) In Situ Bioremediation of Crude Petroleum Oil Polluted Soil Using Mathematical Experimentation. International Journal of Chemical Engineering.

Ojewumi, M. E. and Emetere, Moses and Obanla, O. R. and Babatunde, Damilola Elizabeth and Adimekwe, Ebuka G. (2022) Bio-Conversion of Waste Paper Into Fermentable Sugars—A Review. Frontiers in Chemical Engineering. pp. 1-11.

Ojewumi, M. E. and Obanla, O. R. and Fagbiele, Omololu Oluwatobi and Kolawole, O.E.O. (2022) LAND REMEDIATION AND RECLAMATION TECHNIQUES THROUGH THE BIODEGRADATION OF WASTE PAPERS. JOURNAL OF SOUTHWEST JIAOTONG UNIVERSITY, 57 (4). pp. 28-40. ISSN 0258-2724

Ojewumi, M. E. and Omoleye, James and Ajayi, A. A. (2016) The Effect of Different Starter Cultures on the Protein Content in Fermented African Locust Bean (Parkia Biglobosa) Seeds. International Journal of Engineering Research & Technology (IJERT), 5 (4). pp. 249-255. ISSN 2278-0181

Ojewumi, M. E. and Omoleye, James and Ajayi, A. A. (2018) Phenomenological Model of Percentage Protein in fermented Iru (Parkia biglobosa). Phenomenological Model of Percentage Protein in fermented Iru (Parkia biglobosa) .

Ojewumi, M. E. and Omoleye, James and Ajayi, A. A. (2016) The Study of the Effect of Moisture Content on the Biochemical Deterioration of Stored Fermented Parkia Biglobosa Seeds. Open Journal of Engineering Research and Technology, 1 (1). pp. 14-22.

Ojewumi, M. E. and Oyeyemi, Kayode Gbolahan and Emetere, Moses and Okeniyi, Joshua Olusegun (2018) Data on the rheological behavior of cassava starch paste using different models. Data in Brief. ISSN 2352-3409

Ojo, T.P. and Ajayi, O. O. and Balogun, O.B. (2019) Microbiological and Parasitological Assessment of Vegetables Sold At Owena Ijesa Market Osun State, Nigeria. International Journal of Recent Innovations in Academic Research, 3 (2). 266-274 . ISSN 2635-3040

Ojonimi, Theophilus Ile and Asuke, F. and Onimis, Martins Abu and Onuh, C.Y (2019) Acid Mine Drainage (AMD): an environmental concern generated by coal mining. JOURNAL OF DEGRADED AND MINING LANDS MANAGEMENT, 6 (4). pp. 1875-1881. ISSN 2339‐076X (Print) 2502‐2458 (Online)

Ojuri, O. O. and Ajijola, T.O. and Akinwumi, I. I. (2018) Design of an engineered landfill as possible replacement for an existing dump at Akure, Nigeria. African Journal of Science, Technology, Innovation and Development, 10 (7). pp. 835-843.

Okakwu, Ignatius Kema and Olabode, Olakunle Elijah and Alayande, Akintunde Samson and Somefun, Tobilola Emmanuel and Ajewole, Titus Oluwasuji (2021) Techno-economic Assessment of Wind Turbines in Nigeria. International Journal of Energy Economics and Policy, 11 (2). pp. 240-246. ISSN 2146-4553

Oke, Ayodeji Emmanuel and Aliu, John and Tunji-Olayeni, P .F and Abayomi, Timilehin (2023) Application of gamification for sustainable construction: an evaluation of the challenges. Construction Innovation.

Okedere, O. B. and Elehinafe, F. Boluwaji (2022) Occurrence of polycyclic aromatic hydrocarbons in Nigeria’s environment: A review. Scientific African, 16.

Okedere, O. B. and Elehinafe, Francis B. and Oyelami, Seun and Ayeni, .A. O. (2021) Drivers of anthropogenic air emissions in Nigeria - A review. Heliyon, 7. ISSN 2405-8440

Okedere, O. B. and Olawuyi, Oluwole Ayodeji and Elehinafe, F. Boluwaji and Nwizu, Chizitelu Ifunanya (2022) Impacts of heavy duty truck emissions on the vertical distributions of soil polycyclic aromatic hydrocarbons at a big haulage vehicle park. Results in Engineering, 14.

Okeke, Austin Chukwueloka-Udechukwu and Uno, Jonathan and ACADEME, SUNDAY OYAOGBODE and Emenike, PraiseGod C and Abam, Tamunoene K. S. and Omole, D. O. (2022) An integrated assessment of land use impact, riparian vegetation and lithologic variation on streambank stability in a peri-urban watershed (Nigeria). Scientific Reports.

Okeniyi, J. O. and Oladele, I. O. and Ambrose, I. J. and Okpala, S. O. and Omoniyi, O.M. and Loto, C. A. and Popoola, A. P. I. (2013) Analysis of inhibition of concrete steel-rebar corrosion by Na2Cr2O7 concentrations: Implications for conflicting reports on inhibitor effectiveness. Journal of Central South University, 20 (12). pp. 3697-3714. ISSN 2095-2899

Okeniyi, Joshua Olusegun and AMBROSE, IDEMUDIA JOSHUA and OKPALA, STANLEY OKECHUKWU and OMONIYI, OLUWAFEMI MICHAEL and OLADELE, ISAAC OLUWASEUN and Loto, C. A. and IDOWU POPOOLA, PATRICIA ABIMBOLA (2014) Probability density fittings of corrosion test-data: Implications on C6H15NO3 effectiveness on concrete steel-rebar corrosion. Sadhana, 39 (3). pp. 731-764. ISSN 0256-2499

Okeniyi, Joshua Olusegun and Akinlabi, Esther T. (2020) Inhibition of Gram-negative and fungi strains of microbes inducing microbiologically-influenced-corrosion by Tectona grandis capped Fe-nanoparticle. materialstoday:proceedings, 6 (2).

Okeniyi, Joshua Olusegun and Akinlabi, Esther T. (2022) Inhibition of Gram-negative and fungi strains of microbes inducing microbiologically-influenced-corrosion by Tectona grandis cappedn Fe-nanoparticle. Materials Today: Proceedings.

Okeniyi, Joshua Olusegun and Akinlabi, Esther T. (2020) Modeling Dialium guineense mediated Zn-nanoparticle growth inhibition on Gram-positive microbes inducing microbiologically-influenced-corrosion. Materials Today: Proceedings, 26. pp. 2473-2476.

Okeniyi, Joshua Olusegun and Akinlabi, Esther T. and Akinlabi, Stephen Akinwale and Okeniyi, Elizabeth Toyin (2019) Biochemical characterization data from Fourier transform infra-red spectroscopy analyses of Rhizophora mangle L. bark-extract. Chemical Data Collections, 19.

Okeniyi, Joshua Olusegun and Akinlabi, Esther T. and Ikotun, Jacob Olumuyiwa and Okeniyi, Joshua Olusegun (2019) C6H18N4 BEHAVIOUR ON REINFORCING-STEEL CORROSION IN CONCRETE IMMERSED IN 0.5 M H2SO4. Rasayan Journal of Chemistry. ISSN 0974-1496

Okeniyi, Joshua Olusegun and Ambrosee, Idemudia Joshua and Oladele, Isaac Oluwaseun and Loto, C. A. and Popoola, Patricia Abimbola Idowu (2013) Electrochemical performance of sodium dichromate partial replacement models by triethanolamine admixtures on steel-rebar corrosion in concretes. International Journal of Electrochemical Science, 8 (8). pp. 10758-10771. ISSN 14523981

Okeniyi, Joshua Olusegun and Anwan, E.U. and Okeniyi, E.T. (2012) Waste Characterisation and Recoverable Energy Potential Using Waste Generated in a Model Community in Nigeria. Journal of Environmental Science and Technology, 5 (4). pp. 232-240. ISSN 19947887

Okeniyi, Joshua Olusegun and Anwan, Ebietudube Udonwan (2012) Solid wastes generation in Covenant university, Ota, Nigeria: Characterisation and implication for sustainable waste management. Journal of Materials and Environmental Science, 3 (2). pp. 419-425. ISSN 2028-2508

Okeniyi, Joshua Olusegun and Emuchay, Charles Iheanyichi and Okeniyi, Shemaiah Olufemi (2014) Correlation Between Total Lymphocyte Count, Hemoglobin, Hematocrit and CD4 Count in HIV Patients in Nigeria. Pakistan Journal of Biological Sciences, 17 (4). pp. 570-573. ISSN 10288880

Okeniyi, Joshua Olusegun and Ikotun, Jacob Olumuyiwa and Akinlabi, Esther T. and Okeniyi, Elizabeth Toyin (2019) Anticorrosion Behaviour of Rhizophora mangle L. Bark-Extract on Concrete Steel-Rebar in Saline/Marine Simulating Environment. Hindawi.

Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, A P I (2014) Electrochemical Performance of Phyllanthus Muellerianus on the Corrosion of Concrete Steel-reinforcement in Industrial/Microbial Simulating-environment. Portugaliae Electrochimica Acta, 32 (3). pp. 199-211. ISSN 1647-1571

Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, Abimbola (2016) Effects of Phyllanthus muellerianus Leaf-Extract on Steel-Reinforcement Corrosion in 3.5% NaCl-Immersed Concrete. Metals, 6 (12). p. 255. ISSN 2075-4701

Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, Abimbola Patricia Id (2015) Evaluation and Analyses of Rhizophora mangle L. Leaf-Extract Corrosion-Mechanism on Reinforcing Steel in Concrete Immersed in Industrial/Microbial Simulating-Environment. Journal of Applied Sciences, 15 (8). pp. 1083-1092. ISSN 18125654

Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, Abimbola Patricia Id (2015) Investigating the corrosion mechanism of Morinda lucida leaf extract admixtures on concrete steel rebar in saline/marine simulating environment. International Journal of Electrochemical Science, 10 (12). pp. 9893-9906. ISSN 14523981

Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2016) Anticorrosion performance ofAnthocleista djalonensison steel-reinforced concrete in a sulphuric-acid medium. HKIE Transactions. pp. 1-12. ISSN 1023-697X (In Press)

Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2015) Corrosion Inhibition of Concrete Steel-Reinforcement in Saline/Marine Simulating-Environment by <i>Rhizophora mangle </i>L. Solid State Phenomena, 227. pp. 185-189. ISSN 1662-9779

Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2014) Corrosion inhibition performance of Rhizophora mangle L bark-extract on concrete steel-reinforcement in industrial/microbial simulating-environment. International Journal of Electrochemical Science, 9 (8). pp. 4205-4216. ISSN 14523981

Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2014) Electrochemical Performance of Anthocleista djalonensis on Steel-Reinforcement Corrosion in Concrete Immersed in Saline/Marine Simulating-Environment. Transactions of the Indian Institute of Metals, 67 (6). pp. 959-969. ISSN 0972-2815

Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2015) Inhibition of Steel-Rebar Corrosion in Industrial/Microbial Simulating-Environment by <i>Morinda lucida</i>. Solid State Phenomena, 227. pp. 281-285.

Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2014) Morinda Lucida Effects on Steel-reinforced Concrete in 3.5% NaCl: Implications for Corrosion-protection of Wind-energy Structures in Saline/Marine Environments. Energy Procedia, 50. pp. 421-428. ISSN 18766102

Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2014) Rhizophora Mangle L. Effects on Steel-reinforced Concrete in 0.5M H2SO4: Implications for Corrosion-degradation of Wind-energy Structures in Industrial Environments. Energy Procedia, 50. pp. 429-436. ISSN 18766102

Okeniyi, Joshua Olusegun and Moses, Ime Friday and Okeniyi, Elizabeth Toyin (2015) Wind characteristics and energy potential assessment in Akure, South West Nigeria: econometrics and policy implications. International Journal of Ambient Energy, 36 (6). pp. 282-300. ISSN 0143-0750

Okeniyi, Joshua Olusegun and Obiajulu, Uchechuckwu Eric and Ogunsanwo, Adedamola Oluwafisayo and Odiase, Nosadeba Wisdom and Okeniyi, Elizabeth Toyin (2013) CH4 emission model from the waste of Sus Domesticus and Gallus Domesticus in Nigerian local farms: environmental implications and prospects. Mitigation and Adaptation Strategies for Global Change, 18 (3). pp. 325-335. ISSN 1381-2386

Okeniyi, Joshua Olusegun and Ogunsanwo, Adedamola O. and Odiase, Nosadeba W. and Obiajulu, Uchechukwu E. and Okeniyi, Elizabeth T. (2013) CH4 Emission Model from Bos Primigenius Waste in Fish-Water: Implications for Integrated Livestock-Fish Farming Systems. Journal of Engineering and Technological Sciences, 45 (2). pp. 153-165. ISSN 23375779

Okeniyi, Joshua Olusegun and Ohunakin, O.S. and Okeniyi, Elizabeth Toyin (2015) Assessments of Wind-Energy Potential in Selected Sites from Three Geopolitical Zones in Nigeria: Implications for Renewable/Sustainable Rural Electrification. The Scientific World Journal, 2015. pp. 1-13. ISSN 2356-6140

Okeniyi, Joshua Olusegun and Okeniyi, Elizabeth Toyin (2012) Implementation of Kolmogorov–SmirnovP-value computation in Visual Basic®: implication for Microsoft Excel® library function. Journal of Statistical Computation and Simulation, 82 (12). pp. 1727-1741. ISSN 0094-9655

Okeniyi, Joshua Olusegun and Okeniyi, Elizabeth Toyin and Atayero, A. A. (2020) Implementation of Data Normality Testing as a Microsoft Excel® Library Function by Kolmogorov-Smirnov Goodness-of-fit Statistics. Vision 2020: Sustainable Growth, Economic Development, and Global Competitiveness.

Okeniyi, Joshua Olusegun and Okeniyi, Elizabeth Toyin and Atayero, A. A. (2014) Implementation of data normality testing as a Microsoft Excel® library function by Kolmogorov-Smirnov goodness-of-fit statistics. Vision 2020: Sustainable Growth, Economic Development, and Global Competitiveness - Proceedings of the 23rd International Business Information Management Association Conference, IBIMA 2014, 1. pp. 2561-2578. ISSN 978-0-9860419-2-1

Okeniyi, Joshua Olusegun and Okeniyi, Elizabeth Toyin and Owoeye, Taiwo Felicia (2016) Bio-characterisation of Solanum aethiopicum leaf: prospect on steel-rebar total-corrosion in chloride-contaminated-environment. Progress in Industrial Ecology, An International Journal, 10 (4). pp. 414-426. ISSN 1476-8917

Okeniyi, Joshua Olusegun and Okpala, Stanley Okechukwu and Omoniyi, O.M. and Oladele, Isaac Oluwaseun and Ambrose, Idemudia Joshua and Menkiti, Matthew Chukwudi and Loto, C. A. and Popoola, A.P.I. (2013) Methods of ASTM G16 and conflicts in corrosion test data: Case study of NaNO2 effectiveness on steel-rebar corrosion. Canadian Journal of Pure and Applied Sciences, 7 (3). pp. 2589-2597. ISSN 1715-9997

Okeniyi, Joshua Olusegun and Oladele, Isaac Oluwaseun and Omoniyi, O.M. and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2015) Inhibition and compressive-strength performance of Na2Cr2O7 and C10H14N2Na2O8·2H2O in steel-reinforced concrete in corrosive environments. Canadian Journal of Civil Engineering, 42 (6). pp. 408-416. ISSN 0315-1468

Okeniyi, Joshua Olusegun and Omoniyi, O.M. and Okpala, Stanley Okechukwu and Loto, C. A. and Popoola, Abiola Patricia Idowu (2013) Effect of ethylenediaminetetraacetic disodium dihydrate and sodium nitrite admixtures on steel-rebar corrosion in concrete. European Journal of Environmental and Civil Engineering, 17 (5). pp. 398-416. ISSN 1964-8189

Okeniyi, Joshua Olusegun and Omotosho, O. A. and Ajayi, O. O. and Loto, C. A. (2014) Effect of potassium-chromate and sodium-nitrite on concrete steel-rebar degradation in sulphate and saline media. Construction and Building Materials, 50. pp. 448-456.

Okeniyi, Joshua Olusegun and Omotosho, Olugbenga Adeshola and Ajayi, O. O. and James, O.O. and Loto, C. A. (2012) Modelling the Performance of Sodium Nitrite and Aniline as Inhibitors in the Corrosion of Steel-reinforced Concrete. Asian Journal of Applied Sciences, 5 (3). pp. 132-143. ISSN 19963343

Okeniyi, Joshua Olusegun and Omotosho, Olugbenga Adeshola and Ajayi, O. O. and Loto, C. A. (2014) Effect of potassium-chromate and sodium-nitrite on concrete steel-rebar degradation in sulphate and saline media. Construction and Building Materials 50. pp. 448-456.

Okeniyi, Joshua Olusegun and Omotosho, Olugbenga Adeshola and Loto, C. A. and Popoola, Abimbola Patricia Id (2015) Corrosion Rate and Noise Resistance Correlation from NaNO2-Admixed Steel-Reinforced Concrete. Asian Journal of Scientific Research, 8 (4). pp. 454-465. ISSN 19921454

Okeniyi, Joshua Olusegun and Omotosho, Olugbenga Adeshola and Ogunlana, Olubanke Olujoke and Okeniyi, Elizabeth Toyin and Owoeye, Taiwo Felicia and Ogbiye, Adebanji Samuel and Ogunlana, Ebenezer Oluseyi (2015) Investigating Prospects of Phyllanthus Muellerianus as Eco-friendly/Sustainable Material for Reducing Concrete Steel-reinforcement Corrosion in Industrial/Microbial Environment. Energy Procedia, 74. pp. 1274-1281. ISSN 18766102

Okeniyi, Joshua Olusegun and Popoola, Abimbola Patricia Id and Loto, C. A. (2015) Corrosion test-data modelling for C10H18N2Na2O10 performance on steel-rebar in 3.5% NaCl-immersed concrete. NACE - International Corrosion Conference Series, 2015 (5590). pp. 1-14. ISSN 3614409

Okeniyi, Joshua Olusegun and Popoola, Abimbola Patricia Idowu and Loto, C. A. and Omotosho, Olugbenga Adeshola and Okpala, Stanley Okechukwu and Ambrose, Idemudia Joshua (2015) Effect of NaNO2 and C6H15NO3 Synergistic Admixtures on Steel-Rebar Corrosion in Concrete Immersed in Aggressive Environments. Advances in Materials Science and Engineering, 2015. pp. 1-11. ISSN 1687-8434

Okesola, Olatunji J. and Okokpujie, Kennedy O. and Adebiyi, A. A. and Ayo, C. K. (2018) QUALITATIVE ASSESSMENT OF SYSTEMATIC LITERATURES IN SOFTWARE ENGINEERING. Journal of Theoretical and Applied Information Technology, 96 (18). 6018 -6027. ISSN 1992-8645

Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Okokpujie, Imhade P. and Ajayi, O. O. and Afolalu, Sunday A. and Abioye, Abiodun A. and Salawu, Enesi Y. and Udo, Mfon .O and Okonkwo , Ugochukwu C. and Orodu, Kale B. and Ikumapayi, O. M. (2018) MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 587-600. ISSN 0976-6359

Okokpujie, Imhade P. and Essien, V. and Ikumapayi, Omolayo M. and Nnochiri, Emeka S. and Okokpujie, Kennedy O. and Akinlabi, Esther T. (2022) An Overview of Thermal Insulation Material for Sustainable Engineering Building Application. International information and Engineering Technology Association. pp. 831-841.

Okokpujie, Imhade P. and Fayomi, O. S. I and Ogbonaya, S. K. and Fayomi, G.U. (2019) The Wide Margin Between the Academic and Researcher in a New Age University for Sustainable Development. Energy Procedia, 157. pp. 862-870. ISSN 18766102

Okokpujie, Imhade P. and Ikumapayi, O. M. and Okonkwo , Ugochukwu C. and Salawu, Enesi Y. and Afolalu, Sunday A. and Dirisu, Joseph O. and Nwoke , Obinna N. and Ajayi, O. O. (2017) Experimental and Mathematical Modeling for Prediction of Tool Wear on the Machining of Aluminium 6061 Alloy by High Speed Steel Tools. Open Eng, 7. pp. 461-469.

Okokpujie, Imhade P. and Ohunakin, O.S. and Bolu, Christian and Okokpujie, Kennedy O. (2018) Experimental data-set for prediction of tool wear during turning of Al-1061alloy by high speed steel cutting tools. Data in Brief, 18. pp. 1196-1203. ISSN 2352-3409

Okokpujie, Imhade P. and Okokpujie, Kennedy O. and Nwoke , Obinna N. and Azeta, Joseph (2018) DEVELOPMENT OF A 0.5KW HORIZONTAL AXIS WIND TURBINE. Journal of Engineering and Applied Sciences, 13 (8). pp. 2202-2208. ISSN 1816-949X

Okokpujie, Imhade P. and Okokpujie, Kennedy O. and Omidiora, Segun and Oyewole, Hannah O. and Ikumapayi, O. M. and Emuowhochere, ThankGod O. (2022) Benchmarking and Multi-Criteria Decision Analysis Towards Developing a Sustainable Policy of Just in Time Production of Biogas in Nigeria. International Journal of Sustainable Development and Planning, 17 (2). pp. 433-440.

Okokpujie, Imhade P. and Okonkwo , Ugochukwu C. and Fayomi, O. S. I and Dirisu, Gabriel B. (2019) Data on physicochemical properties of borehole water and surface water treated using reverse osmosis [RO] and ultra-violet [UV] radiation water treatment techniques. Chemical Data Collections, 20.

Okokpujie, Imhade P. and Tartibu, Lagouge K. and Okokpujie, Kennedy O. (2023) Implementation of Box–Behnken design to study the factors interaction impacts and modelling of the surface roughness of AL 6063 alloys during turning operations. International Journal on Interactive Design and Manufacturing (IJIDeM).

Okokpujie, Kennedy O. and Chukwu , Emmanuel C. and Noma-Osaghae, Etinosa and Odusanmi, Modupe and Okokpujie, Imhade P. (2018) A UNIQUE MATHEMATICAL QUEUING MODEL FOR WIRED AND WIRELESS NETWORKS. International Journal of Civil Engineering and Technology (IJCIET) , 9 (9). pp. 810-831. ISSN 0976-6316

Okokpujie, Kennedy O. and Chukwu , Emmanuel C. and Noma-Osaghae, Etinosa and Okokpujie, Imhade P. (2018) Novel Active Queue Management Scheme for Routers in Wireless Networks. International Journal on Communications Antenna and Propagation (I.Re.C.A.P.) , 8 (1). pp. 53-61. ISSN 2039 – 5086

Okokpujie, Kennedy O. and Akinola, Damola Gideon and Nwokolo, Innocent Ozulonye and Olisaemeka, Fredrick and OBIAZI, OGHORCHUKWUYEM ORIEKOSE and Owivri, Oghenetega Chinedu (2022) Enhanced Optical Double Phase Image Encryption Using Random Gaussian Noise. Information Technology for Education and Development.

Okokpujie, Kennedy O. and Alex, Sarah and Abayomi-Alli, Olusola (2021) IMPLEMENTATION OF A BIMODAL BIOMETRIC ACCESS CONTROL SYSTEM FOR DATA CENTER. International Journal of Advanced Research in Engineering and Technology, 12 (3). pp. 410-420. ISSN 0976-6480 and ISSN Online: 0976-6499

Okokpujie, Kennedy O. and Alex, Sarah and Abayomi-Alli, Olusola and John, Abubakar and Adoghe, A. U. and Okokpujie, Imhade P. (2021) IMPLEMENTATION OF A BIMODAL BIOMETRIC ACCESS CONTROL SYSTEM FOR DATA CENTER. International Journal of Advanced Research in Engineering and Technology (IJARET), 12 (3). pp. 410-420.

Okokpujie, Kennedy O. and Amuta, Elizabeth and Adekitan , Aderibigbe and Okokpujie, Imhade P. (2018) Efficient and Low Cost Implementation of a Single Axis Solar Tracking System. Journal of Electrical Engineering, 18 (2). pp. 323-327. ISSN 1582-4594

Okokpujie, Kennedy O. and Anicho-Okoro, Chiamaka and Okokpujie, Imhade P. and Okesola, Julius-Olatunji (2018) Implementation of an Embedded Masked Face Recognition System using Huskylens System-On-Chip Module. IEEE NIGERCON, 8 (5). ISSN 2039 – 5086

Okokpujie, Kennedy O. and Emmanuel, Chukwu and Shobayo, Olamilekan and Noma-Osaghae, Etinosa and Okokpujie, Imhade P. (2019) Comparative analysis of the performance of various active queue management techniques to varying wireless network conditions. International Journal of Electrical and Computer Engineering (IJECE), 9 (1). pp. 359-368. ISSN 2088-8708

Okokpujie, Kennedy O. and Jacinth, David and James, Gabriel Ameh and Okokpujie, Imhade P. and Akingunsoye, Adenugba Vincent (2023) An IoT-Based Multimodal Real-Time Home Control System for the Physically Challenged: Design and Implementation. Information Dynamics and Applications. pp. 90-100.

Okokpujie, Kennedy O. and John, S. N. and Ndujiuba, Charles Uzoanya and Badejo, J. A. and Noma-Osaghae, Etinosa (2021) An improved age invariant face recognition using data augmentation. Bulletin of Electrical Engineering and Informatics, 10 (1). pp. 179-191.

Okokpujie, Kennedy O. and John, S. N. and Noma-Osaghae, Etinosa and Ndujiuba , Charles and Okokpujie, Imhade P. (2019) AN ENHANCED VOTERS REGISTRATION AND AUTHENTICATION APPLICATION USING IRIS RECOGNITION TECHNOLOGY. International Journal of Civil Engineering and Technology (IJCIET), 10 (2). pp. 57-68. ISSN Print: 0976-6308 and Online: 0976-6316

Okokpujie, Kennedy O. and John, S. N. and Noma-Osaghae, Etinosa and Okokpujie, Imhade P. and Okonigene, R. E. (2019) A WIRELESS SENSOR NETWORK BASED FIRE PROTECTION SYSTEM WITH SMS ALERTS. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2). pp. 44-52. ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Okokpujie, Kennedy O. and John, S. N. and Ufuah, Donald and Nwagu, Martins and Noma-Osaghae, Etinosa and Ndujiuba, Charles Uzoanya and Okokpujie, I. P. (2020) Development of an Illumination Invariant Face Recognition System. International Journal of Advanced Trends in Computer Science and Engineering, 9 (5). pp. 9215-9220. ISSN 2278-3091

Okokpujie, Kennedy O. and Kennedy, Chinyere Grace and Nnodu, Kamsiyochukwu and Noma-Osaghae, Etinosa (2023) Cybersecurity Awareness: Investigating Students’ Susceptibility to Phishing Attacks for Sustainable Safe Email Usage in Academic Environment (A Case Study of a Nigerian Leading University). International information and Engineering Technology Association, 18 (1). pp. 255-263.

Okokpujie, Kennedy O. and Kennedy, Chinyere Grace and Nzanzu, Vingi Patrick and Molo, Mbasa Joaquim and Adetiba, E. and Badejo, J. A. (2021) ANOMALY-BASED INTRUSION DETECTION FOR A VEHICLE CAN BUS: A CASE FOR HYUNDAI AVANTE CN7. JOURNAL OF SOUTHWEST JIAOTONG UNIVERSITY, 56 (5). pp. 144-156. ISSN 0258-2724

Okokpujie, Kennedy O. and MUGHOLE, KALIMUMBALO DANIELLA and Badejo, J. A. and Adetiba, E. (2022) Congestion Intrusion Detection-Based Method for Controller Area Network Bus: A Case for KIA SOUL Vehicle. International information and Engineering Technology Association, 9 (5). pp. 1298-1304.

Okokpujie, Kennedy O. and Noma-Osaghae, Etinosa and John, S. N. and Ndujiuba, Charles Uzoanya and Okokpujie, Imhade P. (2021) Comparative analysis of augmented datasets performances of age invariant face recognition models. Bulletin of Electrical Engineering and Informatics, 10 (3). pp. 1356-1367. ISSN 2302-9285,

Okokpujie, Kennedy O. and Noma-Osaghae, Etinosa and Odusami, Modupe and John, S. N. and Oluga , Oluwatosin (2018) A SMART AIR POLLUTION MONITORING SYSTEM. International Journal of Civil Engineering and Technology (IJCIET), 9 (9). pp. 799-809. ISSN 0976-6316

Okokpujie, Kennedy O. and Odusami, Modupe and Noma-Osaghae, Etinosa and Abayomi-Alli , Olusola and Oluwawemimo , Esther (2018) A BIMODAL BIOMETRIC BANK VAULT ACCESS CONTROL SYSTEM. International Journal of Mechanical Engineering and Technology (IJMET) , 9 (9). pp. 596-607. ISSN 0976-6359

Okokpujie, Kennedy O. and Okokpujie, Imhade P. and Odumuyiwa, Ayomikun I. and Orimogunje, Abidemi and Ogundipe, Adebayo T. (2023) Development of a Web and Mobile Applications-Based Cassava Disease Classification Interface Using Convolutional Neural Network. International Information and Engineering Technology Association, 10 (1). pp. 119-128.

Okokpujie, Kennedy O. and Okokpujie, Imhade P. and Ogundipe, Adebayo Tunbosun and Anike, Chukwuka Daniel and Asaboro, Obedafe Blessed and Akingunsoye, Akingunsoye Adenugba (2023) Development of a Sustainable Internet of Things-Based System for Monitoring Cattle Health and Location with Web and Mobile Application Feedback. Internatioanl Information and Technology Association, 10 (3). pp. 740-748.

Okokpujie, Kennedy O. and Okokpujie, Imhade P. and Subair, Roselyn E. and SIMONYAN, EMMANUEL OLUWATOBI and Akingunsoye, Adenugba Vincent (2023) Designing an Adaptive Age-Invariant Face Recognition System for Enhanced Security in Smart Urban Environments. International information and Engineering Technology Association, 24 (4). pp. 815-822.

Okokpujie, Kennedy O. and Orimogunje, Abidemi and Noma - Osaghae, Etinosa and Olaitan, Alashiri (2017) An Intelligent Online Diagnostic System With Epidemic Alert. International Journal of Innovative Science and Research Technology, 2 (9). pp. 327-331. ISSN 2456 – 2165

Okokpujie, Kennedy O. and Shobayo, Olamilekan and Noma-Osaghae, Etinosa and Okokpujie, Imhade P. and Okoyeigbo, Obinna (2018) Performance of MPLS-based Virtual Private Networks and Classic Virtual Private Networks Using Advanced Metrics RECOGNITION TECHNOLOGY. TELKOMNIKA, 16 (5). pp. 2073-2081.

Okoro, Emeka Emmanuel and EFAJEMUE, AKPOVI EWAREZI and Sanni, Samuel Eshorame and Olabode, O.A. and Orodu, O. D. and Ojo, Temiloluwa Application of thermotolerant petroleum microbes at reservoir conditions for enhanced oil recovery. Petroleum.

Okoro, Emeka Emmanuel and IWUAJOKU, SANDRA CHIAMAKA and Sanni, Samuel Eshorame (2020) Performance evaluation of biodiesel produced from waste tire pyrolytic oil as a lubricant additive in oil drilling systems. Recycling, 5 (4).

Okoro, Emeka Emmanuel and IWUAJOKU, SANDRA CHIAMAKA and Sanni, Samuel Eshorame and Igwilo, K. C. (2022) Assessment of frictional torque and lubricity of waste-tire bio-oil as lubricant additive for stuck pipe. Journal of King Saud University – Science, 34.

Okoro, Emeka Emmanuel and Igbinedion, Uyiosa and Aimikhe, Victor and Sanni, Samuel Eshorame and Agwu, Okorie Ekwe (2022) Evaluation of influential parameters for supersonic dehydration of natural gas: Machine learning approach. Petroleum Research, 7. pp. 372-383.

Okoro, Emeka Emmanuel and Igwilo, K. C. and Orodu, Kale B. (2018) A review on waste to biogas sources and its potential in Nigeria. International Journal of Engineering & Technology, 7 (4). pp. 5960-5966.

Okoro, Emeka Emmanuel and Ikeora, Ekene and Sanni, Samuel Eshorame and Aimihke, Victor J. (2022) Adoption of machine learning in estimating compressibility factor for natural gas mixtures under high temperature and pressure applications. Flow Measurement and Instrumentation, 88.

Okoro, Emeka Emmanuel and Kurah, Adokiye Mercy and Sanni, Samuel Eshorame and Dosunmu, A. and Ekeinde, Evelyn Bose (2019) Flow line corrosion failure as a function of operating temperature and CO2 partial pressure using real time field data. Engineering Failure Analysis, 102. pp. 160-169.

Okoro, Emeka Emmanuel and Madu, Nnaemeka and Ekeinde, Evelyn Bose and Dosunmu, Adewale (2017) A MODEL TO OPTIMIZE A CRYOGENIC SEPARATION SYSTEM WITH INNOVATIVE HYBRID DISTILLATION MEMBRANE IN SERIES. Petroleum and Coal, 59 (6). pp. 967-974. ISSN 1337-7027

Okoro, Emeka Emmanuel and Obomanu, Tamunotonjo and Sanni, Samuel Eshorame and Olatunji, David I. and Igbinedion, Paul (2022) Application of artificial intelligence in predicting the dynamics of bottom hole pressure for under-balanced drilling: Extra tree compared with feed forward neural network model. Petroleum, 8 (2). pp. 227-236.

Okoro, Emeka Emmanuel and Okoh, Austin and Ekeinde, Evelyn Bose and Dosunmu, A. (2019) Reserve Estimation Using Decline Curve Analysis for Boundary-Dominated Flow Dry Gas Wells. Arabian Journal for Science and Engineering.

Okoro, Emeka Emmanuel and Okolie, Amarachi G and Sanni, Samuel Eshorame and Joel, E. S. and Agboola, Oluranti and Omeje, Maxwell (2020) Assessment of naturally occurring radiation in lithofacies of oil field in Niger Delta region and its possible health implications. Journal of Environmental Management, 264.

Okoro, Emeka Emmanuel and Sanni, Samuel Eshorame and Obomanu, Tamunotonjo and Igbinedion, Paul (2023) Predicting the effects of selected reservoir petrophysical properties on bottomhole pressure via three computational intelligence techniques. Petroleum Research, 8. pp. 118-129.

Okoro, Emeka Emmanuel and Sanni, Samuel Eshorame and Okolie, Amarachi G and Abraham, V. D. and Omeje, Maxwell and Obomanu, Tamunotonjo (2020) Impact of Radioactivity and Heavy Metal Concentrations from subsurface formation cuttings on the Environment. BALTICA, 33 (2). ISSN 0067-3064

Okoro, Emeka Emmanuel and Sanni, Samuel Eshorame and Omeje, Maxwell and Igwilo, K. C. and Olawole, C. Olukunle (2022) Risk assessment of human exposure to radionuclides and heavy metals in oil-based mud samples used for drilling operation. International Journal of Environmental Health Research, 32 (5). pp. 972-983.

Okoro, Wilson and Oyebisi, S.O (2023) Mechanical and durability assessments of steel slag-seashell powder-based geopolymer concrete. Heliyon, 9.

Okoyeigbo, Obinna and Ibhaze, Augustus E. and Olajube, Ayobami and Shobayo, Olamilekan and Somefun, Tobilola Emmanuel and Steve-Essi, Onyinyechi F. (2021) Design and Analysis of a Broadband Microwave Amplifier. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 9 (1). pp. 210-219. ISSN 2089-3272

Okoyeigbo, Obinna and Okokpujie, Kennedy O. and Noma-Osaghae, Etinosa and Ndujiuba, Charles Uzoanya and Shobayo, Olamilekan and Abolade , Jeremiah (2018) Comparative Study of MIMO-OFDM Channel Estimation in Wireless Systems. International Review on Modelling and Simulations (I.RE.MO.S.), 11 (3). pp. 158-165. ISSN 1974-9821

Okuboyejo, Sena (2014) Non-Adherence to Medication in Outpatient Setting in Nigeria: The Effect of Employment Status. Global Journal of Health Science, 6 (3). pp. 37-44. ISSN 1916-9736

Okuboyejo, Sena and Akor, Samuel and Adewumi, A. O. (2012) Development of a Mobile Feedback System for Health Institutions in Nigeria. African Journal of Computing & ICT, 5 (6). pp. 41-44. ISSN 2006-1781

Okuboyejo, Sena and Eyesan, Omatseyin (2014) mHealth: Using Mobile Technology to Support Healthcare. Online Journal of Public Health Informatics, 5 (3). pp. 1-10. ISSN 1947-2579

Okuboyejo, Sena and Omoregbe, N. A. and Mbarika, Victor (2012) A Framework for the Design of a Mobile-Based Alert System for Outpatient Adherence in Nigeria. African Journal of Computing & ICT, 5 (5). pp. 151-158. ISSN 2006-1781

Olabode, Idowu-Bismark and Okokpujie, Kennedy O. and Idachaba, F.E. and Atayero, A. A. (2018) A Primer on MIMO Detection Algorithms for 5G Communication Network. International Journal on Communications Antenna and Propagation (I.Re.C.A.P.), 8 (3). ISSN 2039 – 5086

Olabode, O.A. and Adewunmi, Pelumi and Uzodinma, Odera and Famurewa, Gideon and Ogba, Princess and Amah, Chukwuemeka (2023) Simulation studies on optimizing oil productivity in oil rim reservoirs under gas cap blow down production strategy. Petroleum. pp. 373-389.

Olabode, O.A. and Etim, E. and Okoro, Emeka Emmanuel and Ogunkunle, Temitope and Abraham, V. D. (2019) PREDICTING POST BREAKTHROUGH PERFORMANCE OF WATER AND GAS CONING. International Journal of Mechanical Engineering and Technology, 10 (02). pp. 255-272. ISSN 0976-6340 and ISSN Online: 0976-6359

Olabode, O.A. and Isehunwa, Sunday and Orodu, O. D. and Ake, Daniel (2021) Optimizing productivity in oil rims: simulation studies on horizontal well placement under simultaneous oil and gas production. Journal of Petroleum Exploration and Production Technology, 11. pp. 385-397.

Olabode, O.A. and Nnorom, E. C. and Ajagunna, Samuel and Awelewa, Kehinde and Umunna, Precious and Uzodinma, Odera (2022) Dataset on modelling a synthetic oil rim reservoirs for optimizing oil production during gas cap blow down strategy. Data in Brief. ISSN 2352-3409

Olabode, O.A. and Orodu, O. D. and Isehunwa, Sunday and Mamudu, Angela Onose and Rotimi, Tosin (2018) Effect of foam and WAG (water alternating gas) injection on performance of thin oil rim reservoirs. Journal of Petroleum Science and Engineering, 171. pp. 1443-1454.

Oladimeji, Temitayo E, and Sonibare, Jacob and Omoleye, James and Emetere, Moses and Elehinafe, F. Boluwaji (2018) A REVIEW ON TREATMENT METHODS OF USED LUBRICATING OIL. International Journal of Civil Engineering and Technology, 9 (12). pp. 506-514. ISSN 0976-6308 and ISSN Online: 0976-6316

Oladimeji, Temitayo E, and Sonibare, Jacob and Omoleye, James and Adegbola, Abiola A. and Okagbue, H. I. (2018) Data on the treatment of used lubricating oil from two different sources using solvent extraction and adsorption. Data in Brief. pp. 2240-2252. ISSN 2352-3409

Olaitan, Oluwaseum Micheal and Orodu, O. D. and Ehinmowo, A. B. (2017) Experimental Investigation of Limonene-based Environmental-Friendly Emulsion Drilling Mud. American Journal of Engineering and Applied Sciences, 10 (2). pp. 611-621.

Olalusi, Oladimeji B. and Durgapershad, Avishkar and Awoyera, P. O. and Kolawole, John Temitope (2022) Modelling the edge breakout shear capacity of single anchors using gene expression programming. Neural Computing and Applications.

Olanipekun, Ayorinde Tayo and Abioye, Abiodun A. and Oluwabunmi, Kayode Emmanuel (2018) Time-Dependent Ginzburg–Landau equation modelling of electron beam additive manufactured Titanium alloy. Leonardo Electronic Journal of Practices and Technologies, 32. pp. 93-102. ISSN 1583-1078

Olanipekun, Ayorinde Tayo and Oluwabunmi, Kayode Emmanuel and Abioye, Abiodun A. and Rominiyi, Azeez Lawan and Balogun, Oluwayomi Peter and Sanusi, Kazeem Oladiti and Faola, Aderonke Esther (2017) Inventing a New Africa through Discovery and Innovations in Computational Material Science. European Journal of Applied Engineering and Scientific Research, 5 (2). pp. 14-19. ISSN 2278-0041

Olatomiwa, Lanre and Mekhilef, Saad and Huda, A.S.N. and Ohunakin, O.S. (2015) Economic evaluation of hybrid energy systems for rural electrification in six geo-political zones of Nigeria. Renewable Energy, 83. pp. 435-446.

Olayemi, Olalekan Adebayo and Isiaka, Muhammed and Al-Farhany, Khaled and Alomari, Mohammed Azeez and Ismael, Muneer A. and Oyedepo, Sunday Olayinka (2022) Numerical Analysis of Natural Convection in a Concentric Trapezoidal Enclosure Filled with a Porous Medium. International Journal of Engineering Research in Africa, 61. pp. 129-150. ISSN 1663-4144

Olayemi, Olalekan Adebayo and Olabemiwo, Jekayinoluwa Temitope and Dirisu, J. O. and Ogunwoye, Oloruntobiloba Victor and Jolayem, Temidayo Samsudeen and Anyaegbuna, Benjamin Elochukwu and Olaniyan, Tirimisiyu Abiola (2022) Numerical simulation of heat transfer and fluid flow around a cylinder of varying cross-section. Materials Today: Proceedings. pp. 2128-2137.

Olofinnade, O. M. and Ede, A. N. and Ndambuki, J.M. Experimental Investigation on the Effect of Elevated Temperature on Compressive Strength of Concrete Containing Waste Glass Powder. International Journal of Engineering and Technology Innovation. (In Press)

Olofinnade, O. M. and Ede, A. N. and Ndambuki, J.M. (2017) Sustainable Green Environment through Utilization of Waste Soda-Lime Glass for Production of Concrete. Journal of Materials and Environmental Sciences, 8 (4). pp. 1139-1152. ISSN 2028-2508

Olofinnade, O. M. and Ndambuki, J.M. and Ede, A. N. and Booth, C. A. (2017) Application of Waste Glass Powder as a Partial Cement Substitute towards more Sustainable Concrete Production. International Journal of Engineering Research in Africa, 31. pp. 77-93. ISSN 1663-4144

Olofinnade, O. M. and Ndambuki, J.M. and Ede, A. N. and Olukanni, D. O. Effect of Substitution of Crushed Waste Glass as Partial Replacement for Natural Fine and Coarse Aggregate in Concrete. Scientific.Net. pp. 58-62.

Olofinnade, O. M. and Ndambuki, J.M. and Ede, A. N. and Olukanni, D. O. (2016) Effect of Substitution of Crushed Waste Glass as Partial Replacement for Natural Fine and Coarse Aggregate in Concrete. Scientific.Net, 886. 58 - 62.

Olofinnade, O. M. and Oyawoye, I. T. Influence of Calcined Clay on the Strength Characteristics and Microstructure of Recycled Aggregate Concrete for Sustainable Construction. International Journal of Engineering Research in Africa, 54. pp. 56-70.

Oloke, C. Olayinka and Ajibola, M. O. and Iroham, C.O. (2013) Cost of Urban Rental Housing and its Implications on Home Ownership Drive of Middle and Low-Income Earners in Lagos State, Nigeria. International Journal of Arts and Commerce, 2 (8). pp. 65-75.

Oloke, C. Olayinka and Ijasan, K.C. and Ogunde, Ayodeji and Amusan, L. M. and Tunji-Olayeni, P .F (2013) Improving Urban Residents’ Awareness of the Impact of Household Activities on Climate Change in Lagos State, Nigeria. Journal of Sustainable Development, 6 (4). pp. 56-69. ISSN 1913-9071

Oloke, C. Olayinka and Ijasan, K.C. and Oyedele, B.J. (2013) Performance Assessment of Partnership Estate Surveying and Valuation Firms in Lagos State, Nigeria. Mediterranean Journal of Social Sciences, 4 (13). pp. 489-497. ISSN 2039-2117

Oloke, C. Olayinka and Simon, R.F. and Adesulu, A.F. (2013) An Examination of the Factors Affecting Residential Property Values in Magodo Neighbourhood, Lagos State. International Journal of Economy, Management and Social Sciences, 2 (8). pp. 639-643. ISSN 2306-7276

Ololade, Alebiosu Jadesola and Paul, Salau Odunayo and Atolagbe, Tolulope Morenike, and Esitse, Dada Augustina (2023) Bolstering the role of human resource information system on employees’ behavioural outcomes of selected manufacturing firms in Nigeria. Heliyon, 9 (2785). pp. 1-12.

Olowo, Olalekan and Abdulkareem, Ademola (2017)  Modelling and Analysis of Powerline Temperature Surveillance with Optisystem Simulation. The International Journal of Engineering and Science (IJES), 6 (8). pp. 14-20. ISSN 2319-1813 ISSN (p): 2319 – 1805

Olowofoyeku, O. A. and Ofuyatan, Olatokunbo M. and Bamigboye, Gideon and Busari, A. A. (2016) ASSESSMENT OF THE GEOTECHNICAL PROPERTIES OF TERMITE REWORKED SOILS. ARPN Journal of Engineering and Applied Sciences, 11 (17). pp. 10327-10331. ISSN 1819-6608

Olowoleni, J. O. and Awosope, C. O. A. and Adoghe, A. U. and Agbetuyi, Ayoade F. and Oguntosin, V. and Halin, C. A. (2022) The Design of an Automated Etching System. Technological Innovation in Engineering Research, 8. pp. 104-112.

Olowoleni, J. O. and Awosope, C. O. A. and Adoghe, A. U. and Obinna, Okoyeigbo and Udo, Udochukwu Ebubechukwu (2021) Design and simulation of a novel 3-point star rectifying antenna for RF energy harvesting at 2.4 GHz. Cogent Engineering.

Oloyede, S. A. and Ajibola, M. O. and Durodola, O. D. (2010) Neighborhood Citizen Participation in Environmental Planning and Management in Lagos State:The Estate Surveyors' View. Journal of Sustainable Development in Africa, 12 (7). pp. 186-195. ISSN 1520-5509

Oloyede, S. A. and Ayedun, C. A. and Ajibola, M. O. (2011) Issues Facing the Estate Surveying and Valuation Profession in Nigeria. Business Management Dynamics, 1 (2). pp. 54-60. ISSN 2047-7031

Olugbara, O. O. and Adetiba, E. and Oyewole, Stanley A. (2015) Pixel Intensity Clustering Algorithm for Multilevel Image Segmentation. Mathematical Problems in Engineering. pp. 1-19.

Olugbenga, Adeshola Omotosho and Okeniyi, Joshua Olusegun and Ajayi, O. O. and Ajanaku, K. O. and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2015) Analyses of Corrosion Potential from Inhibitor-Admixed Steel-Reinforced Concrete: Implication on Steel-Rebar Corrosion Risk/Probability. International Journal of Structural Analysis & Design– IJSAD, 2 (1). pp. 10-14. ISSN 2372-4102

Olukanni, D. O. and Adedeji, Adeola A. and Salami, A. W. (2017) Assessment of Selected Dams in Kwara State, Nigeria. Journal of Research Information in Civil Engineering, 14 (2). pp. 1561-1573.

Olukanni, D. O. and Adeleke, O. J. and Aremu, D.D. (2016) A Review of Local Factors Affecting Solid Waste Collection in Nigeria. Pollution,, 2 (3). p. 339. ISSN 2383-4501

Olukanni, D. O. and Agunwamba, J. C and Ugwu, E. I. (2014) Biosorption of heavy metals in industrial wastewater using micro-organisms (Pseudomonas aeruginosa). AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 5 (2). pp. 81-87. ISSN 2153-649X

Olukanni, D. O. and Ajetomobi, Michael O. and Tebowei, Samson O. and Ologun, O. O. and Kayode, Oluwasanmi M. (2014) Water Supply and Sanitation Challenges in an Urban Setting: A Case Study. International Journal of Engineering and Applied Sciences (IJEAS), 1 (3). pp. 34-38. ISSN 2394-3661

Olukanni, D. O. and Aremu, D.O. (2017) Provisional Evaluation of Composting as Priority Option for Sustainable Waste Management in South-West Nigeria. Pollution, 3 (3). pp. 417-428. ISSN 2383-4501

Olukanni, D. O. and Azuh, Dominic E. and Toogun, Tunde O. and Okorie, Uchechukwu Emenas (2014) Medical Waste Management Practices Among Selected Health-care Facilities in Nigeria: A Case Study. Academic Journals, 9 (10). pp. 431-439. ISSN 1992-2248

Olukanni, D. O. and Busari, A. A. and Ogundeji, Jadesola (2015) Water Withdrawal Trends, Cost and Uses in Ota, Ogun State, Nigeria. Journal of Engineering, Science and Technology, 2 (1). pp. 3-7.

Olukanni, D. O. and Ige, Babatunde and Bamigboye, Gideon and Durodola, B. M. (2019) Early deterioration assessment of selected reinforcement in different host environments, case study: Lagos State, Nigeria. Cogent Engineering, 6. pp. 1-10.

Olukanni, D. O. and Iroko, T.S. and Aremu, A. S. (2015) Cost Appraisal of Municipal Solid Waste Transfer to Disposal Site Using Visual Basic Program. Pollution, 1 (4). pp. 427-439.

Olukanni, D. O. and Justin, L.D and FAGBENLE, EMMANUEL OLABAYO (2022) Healthcare Waste Management Practices in Nigeria: A Review Authors David O Olukanni, Justin D Lazarus, Emmanuel Fagbenle. Springer, Singapore. pp. 197-218.

Olukanni, D. O. and Kokumo, Kola O. (2013) Efficiency Assessment of a Constructed Wetland Using Eichhornia Crassipes for Wastewater Treatment. American Journal of Engineering Research (AJER), 2 (12). pp. 450-454. ISSN 2320-0847

Olukanni, D. O. and Mnenga, Myem U. (2015) Municipal Solid Waste Generation and Characterization: A Case Study of Ota, Nigeria. International Journal of Environmental Science and Toxicology Research, 3 (1). pp. 1-8. ISSN ISSN: 2408-7262

Olukanni, D. O. and Ojukwu, Chukwuebuka N. (2021) 7 Biogas Recovery from. Biomethane through Resource Circularity: Research, Technology and Practices.

Olukanni, D. O. and Okorie, Uchechukwu Emenas (2015) Empirical Assessment of Water, Sanitation and Hygiene Practices in a Semi-Urban Setting: A Socio-Economic and Cultural Mirror. Journal of Scientific Research & Reports, 8 (7). pp. 1-11. ISSN 2320-0227

Olukanni, D. O. and Salami, A. W. (2008) Fitting Probability Distribution Functions To Reservoir Inflow At Hydropower Dams In Nigeria. Journal of Environmental Hydrology, 16 (35). pp. 1-7.

Olukanni, D. O. and Ugwu, E. I. and Ogbu, Ifeanyi B. and Ademiluyi, Joel O. (2015) SLUDGE DEWATERING SUBJECTED TO CONSTANT VACUUM PRESSURE: A MODELLING APPROACH. International Journal of Current Research, 7 (1). pp. 11500-11504. ISSN 0975-833X

Olusegun, Okeniyi and Okeniyi, Elizabeth and Atayero, A. A. (2015) Programming Development of Kolmogorov-Smirnov Goodness-of-Fit Testing of Data Normality as a Microsoft Excel® Library Function. Journal of Software & Systems Development, 2015. pp. 1-15. ISSN 21660824

Oluseyi, Peter Olabisi and Somefun, Tobilola Emmanuel and Babatunde, Olubayo Moses and AKINBULIRE, T. 0 and Babayomi, Oluleke O. and Samuel, I. A. and Babatunde, Damilola Elizabeth (2020) Evaluation of Energy-efficiency in Lighting Systems for Public Buildings. International Journal of Energy Economics and Policy, 10 (6). pp. 435-439. ISSN 2146-4553

Olutoge, F. A. and Ofuyatan, Olatokunbo M. and Olowofoyeku, O. A. and Bamigboye, Gideon and Busari, A. A. (2016) STRENGTH PROPERTIES OF SLURRY INFILTRATED FIBROUS CONCRETE (SIFCON) PRODUCED WITH DISCRETE BAMBOO AND STEEL FIBRES. ARPN Journal of Engineering and Applied Sciences, 11 (23). pp. 13448-13453. ISSN 1819-6608

Oluwabunmi, Kayode Emmanuel and Adeleke, Abraham Adewale and Adetunji, Adelana Razak and Jeje, Samson Olaitan and Abioye, Abiodun A. and Adesina, A.A. and Ayeni, Fatai Afolabi and Ibitoye, Folahan Peter (2014) 2k Factorial Experiments on Factors that Influence the Recovery of Gold during the Upgrade of Ilesha-Itagunmodi Gold Ore through Froth Flotation. Journal of Minerals and Materials Characterization and Engineering, 2. pp. 32-39.

Oluwafemi, J and Ofuyatan, Olatokunbo M. and Ede, A. N. and Ngene, Ben U. and Oyebisi, S.O and Oshokoya, O.O (2018) SIMULATED RESPONSE OF BUILDINGS TO EARTHQUAKE IN THE SOUTH-WESTERN REGION OF NIGERIA. International Journal of Civil Engineering and Technology (IJCIET), 9 (7). pp. 467-475. ISSN 0976-6316

Oluwafemi, John and Ofuyatan, Olatokunbo M. and Adedeji, Adeola A. and Bankole, Deborah and Justin, L.D (2023) Reliability assessment of ground granulated blast furnace slag/ cow bone ash- based geopolymer concrete. Journal of Building Engineering, 64 (1).

Oluwafemi, John and Ofuyatan, Olatokunbo M. and Ede, A. N. and Oyebisi, S.O and Akinwumi, I. I. (2018) REVIEW OF EARTHQUAKES IN NIGERIA: AN UNDERSTUDIED AREA. International Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 1023-1033. ISSN 0976-6316

Oluwafemi, John and Ofuyatan, Olatokunbo M. and Oyebisi, S.O and Alayande, T and Tumba, Masi (2018) PROBABILISTIC SEISMIC HAZARD ANALYSIS OF SOUTH-WESTERN NIGERIA. International Journal of GEOMATE, 15 (52). 16 - 22. ISSN 2186-2990

Oluwatayo, A. A. and Amole, D. and Adeboye, A. B. (2014) Architectural Firms in Nigeria: A Study of Organizational Culture and Determinants. Global Journal of Researches in Engineering: e Civil And Structural Engineering, 14 (1). ISSN 2249-4596 & Print: 0975-5861

Oluwatayo, A. A. and Opoko, Pearl Akunnaya and Ezema, I. C. and Alagbe, O. A. and Adeboye, A. B. and Fulani, O. (2015) Design studio project complexity and students’ perceptions of their creativity. Global Journal on Humanites & Social Sciences (1). pp. 63-66.

Oluwatobi, Stephen and Afolabi, A.O. and Tunji-Olayeni, P .F and Oluwatobi, A. O. and Emebo, Onyeka (2023) Repositioning industry R&D units into tertiary education research laboratories. International Journal of Business and Globalisation.

Oluwole , .O and Fajobi, M. A. (2015) Effect of Thermal Stresses on Self Supporting Telecommunication Mast. International Journal of Scientific & Engineering Research, 6 (5). pp. 668-677. ISSN 2229-5518

Oluwunmi, Adedamola O (2009) Real Estate Financing Through Banks: The Nigrian Experience. Global Journal of Engineering and Technology, 2 (2). pp. 293-300.

Oluwunmi, Adedamola O and Ajayi, C.A. and Olaleye, A. and Fagbenle, Olabosipo I. (2011) An Analysis of Clients' Satisfaction with Mortgage Valuation Reports in Nigeria. International Journal of Marketing Studies, 3 (2). pp. 160-168.

Oluwunmi, Adedamola O and Akinjare, O. A. and Ajibola, M. O. and Oloke, C. Olayinka (2018) AN EVALUATION OF THE BASIC FACILITY NEEDS OF PRIVATE UNIVERSITY STUDENTS IN OGUN STATE, NIGERIA. International Journal of Civil Engineering and Technology (IJCIET), 9 (9). pp. 476-484. ISSN 0976-6316

Oluwunmi, Adedamola O and Akinjare, O. A. and Ayedun, C. A. RENTAL VALUE AROUND HVOTL FACILITIES IN RESIDENTIAL NEIGHBORHOODS OF METROPOLITAN LAGOS, NIGERIA. European Scientific Journal, 8 (11). pp. 75-86. ISSN 1857- 7431

Oluwunmi, Adedamola O and Akinjare, O. A. and Ayedun, C. A. Rental Value Around HVOTL Facilities in Residential Neighborhoods of Metropolitan Lagos,Nigeria. European Scientific Journal, 8 (11). pp. 75-86. ISSN 1857- 7431

Oluwunmi, Adedamola O and Emeghe, Ijeoma and Oluwadamilola, A. and Fulani, O. and Peter, Nkolika Joy and Akinjare, O. A. Gender Inequality and Women Discrimination In Real Estate Firms in Lagos State, Nigeria. IBIMA.

Oluwunmi, Adedamola O and Izobo-Martins, O. (2012) User's Satisfaction with Residential Facilities in Nigerian Private Universities:A Study of Covenant University. Transnational Journal of Science and Technology, 2 (11). pp. 89-112.

Oluyori, T. and Olorunniwo, O. E. and Fayomi, O. S. I and Atanda, P. O. and Popoola, A. P. I. (2017) Performance Evaluation Effect of Nb2O5 Particulate on the Microstructural, Wear and Anti-corrosion Resistance of Zn–Nb2O5 Coatings on Mild Steel for Marine Application. J Bio Tribo Corros, 3 (51).

Omeje, Maxwell and Orosun, Muyiwa Michael and Adewoyin, O.O and Joel, E. S. UNSPECIFIED

Omeje, Maxwell and Wagiran, Husin and Ibrahim, Noorddin and Kuan Lee, Siak and Sabri, Soheil (2013) Measurement Of 238U, 232TH And 40K In Boreholes At Gosa And Lugbe, Abuja, North Central NigeriaI. Radiation Protection Dosimetry. pp. 1-7.

Omeje, Maxwell and Wagiran, Husin and Zaidi, Embong and Joel, E. S. and Tenebe, I.T. and Oha, I. A. and Onwuka, O. S. (2016) Radiotoxicity risks of radium-226 (226Ra) on groundwater-based drinking at Dawaki, Kuje, Giri and Sabon-Lugbe area of Abuja, North Central Nigeria. Environ Earth Sci, 75.

Omodara, O. J. and Ayo, Daniel and Emetere, Moses and Ayoola, A. A. (2018) EMPIRICAL MODEL FOR OPTIMIZING SHEA BUTTER EXTRACTION IN AN UNBAFFLED VESSEL EQUIPPED WITH AN IMPELLER. CHEMISTRY & CHEMICAL TECHNOLOGY, 12. pp. 221-228.

Omole, D. O. (2021) The nexus between indoor air pollution, electricity generation, waste management, and water supply in Nigeria. Journal of the Commonwealth Human Ecology Council, 31.

Omoregbe, N. A. (2008) Formal modelling and design of mobile prescription applications. Journal of Health Informatics in Developing Countries, 2 (2). pp. 6-9.

Omoregbe, N. A. and Azeta, A. A. A Voice-based Mobile Prescription Application for Healthcare Services (VBMOPA). International Journal of Electrical and Computer Sciences, 10 (2). pp. 73-78.

Omoruyi, Osemwegie and Okereke, Chinonso and Okokpujie, Kennedy O. and Noma-Osaghae, Etinosa and Okoyeigbo, Obinna and John, S. N. (2019) Evaluation of the quality of an image encrytion scheme. TELKOMNIKA, 17 (6). pp. 2968-2974.

Omoruyi, Osemwegie and Okokpujie, Kennedy O. and Nsikan, Nkordeh and John, S. N. and Adewale, Adeyinka A. (2017) On Issues, Strategies and Solutions for Computer Security and Disaster Recovery in Online Start-ups. International Journal of Applied Engineering , 12 (19). pp. 8009-8015. ISSN 0973-4562

Omosehin, Olarenwaju and Oseni, Joseph and Olutumise, Adewale and Osabuohien, E. S. C. (2022) Palm Oil Price Fluctuations and Welfare in Nigeria. COVID-19 in the African Continent.

Omotosho, O. A. and Ajayi, O. O. and Fayomi, O. S. I and Yussuff, O.O. (2012) Degradation Evaluation of Zinc m 2 M Hydrochloric Acid m the Presence of Bambusa bambos. Singapore Journal of Scientific Research, 2 (1). pp. 14-24. ISSN 2010-006x

Omotosho, O. A. and Okeniyi, J. O. and Ajayi, O. O. (2010) Performance Evaluation of Potassium Dichromate and Potassium Chromate Inhibitors on Concrete Steel Rebar Corrosion. Journal of Failure Analysis and Prevention, 10 (5). pp. 408-415. ISSN 1547-7029

Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2012) Investigating the Acid Failure of Aluminium Alloy in 2 M Hydrochloric Acid Using Vernonia amygdalina. ITB J. Eng. Sci, 44 (1). pp. 77-72.

Omotosho, Olugbenga Adeshola and Loto, C. A. and Ajayi, O. O. and Okeniyi, Joshua Olusegun (2011) Aniline effect on concrete steel rebar degradation in saline and sulfate media. Agricultural Engineering International: CIGR Journal, 13 (2). pp. 1-17. ISSN 16821130

Omotosho, Olugbenga Adeshola and Loto, C. A. and Ajayi, O. O. and Okeniyi, Joshua Olusegun and Popoola, Abimbola Patricia Id (2014) Investigating potassium chromate and aniline effect on Concrete Steel rebar degradation in saline and sulphate media. International Journal of Electrochemical Science, 9 (4). pp. 2171-2185. ISSN 14523981

Omotosho, Olugbenga Adeshola and Loto, C. A. and Ajayi, Oluseyi O. and Okeniyi, Joshua Olusegun (2011) Statistical-based performance evaluation of inhibitors on the corrosion of steel rebar in concrete. Botswana Journal of Technology, 19 (2). pp. 220-226. ISSN 1019-1593

Omotosho, Olugbenga Adeshola and Okeniyi, Joshua Olusegun and Ajayi, O. O. and Loto, C. A. (2012) Effect of synergies of K2Cr2O7, K2CrO4, NaNO2 and aniline inhibitors on the corrosion potential response of steel reinforced concrete in saline medium. INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCES, 2 (4). pp. 2346-2359. ISSN 0976–4402

Omotosho, Olugbenga Adeshola and Okeniyi, Joshua Olusegun and Oni, Adeoluwa Barnabas and Makinwa, Thomas Oluwafemi and Ajibola, Omokolade Bamidele and Fademi, Ekundayo Oluwademilade Jacob and Obi, Chukwunonso Ezekiel and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2016) Inhibition and mechanism of Terminalia catappa on mild-steel corrosion in sulphuric-acid environment. Progress in Industrial Ecology, An International Journal, 10 (4). pp. 398-413. ISSN 1476-8917

Omuh, I. O. and Mosaku, T. O. and Joshua, Opeyemi and Ojelabi, Rapheal A. (2018) Data on mixing and curing methods effects on the compressive strength of concrete. Data in Brief, 18. 877 - 881.

Omuh, I. O. and Mosaku, T. O. and Joshua, Opeyemi and Ojelabi, Rapheal A. and Amusan, L. M. and Afolabi, A.O. and Arowolo, Adeoluwa O. (2018) Data on mixing and curing methods effects on the compressive strength of concrete. Data in Brief, 18. pp. 877-881.

Omuh, I. O. and Mosaku, T. O. and Tunji-Olayeni, P .F and Ojelabi, Rapheal A. and Afolabi, A.O. and Joshua, Opeyemi (2018) APPRAISAL OF RETROFITTING EXISTING STRUCTURES TO PROVIDE ACCESS TO CLEAN AND SUSTAINABLE ENERGY. International Journal of Civil Engineering and Technology (IJCIET), 9 (7). pp. 550-557. ISSN 0976-6316

Onawumi, A.S. (2016) Kinematic Description of Hip and Knee Marker link system of Taxicab Operator. Innovative Systems Design and Engineering, 7 (3). pp. 42-52. ISSN 2222-2871

Onawumi, A.S. (2016) Sitting Habit and Posture Investigation of Office Employees in Nigeria. International Journal of Emerging Trends in Engineering and Development, 6 (3). pp. 1-9. ISSN 2249-6149

Onawumi, A.S. and Adebiyi, K. A. and FajobI, Fajobi and OKE, Emmanuel Olusola (2016) DEVELOPMENT OF PREDICTIVE MODELS FOR SOME ANTHROPOMETRIC DIMENSIONS OF NIGERIAN OCCUPATIONAL BUS OPERATORS. European International Journal of Science and Technology, 5 (5). pp. 12-27. ISSN 2304-9693

Onawumi, A.S. and Dunmade, I.S. and Ajayi, O. O. and Adebiyi, K. A. and Omotosho, A. O. (2016) INVESTIGATION OF WORK RELATED HEALTH HAZARDS PREVALENT AMONG METAL FABRICATION WORKERS IN NIGERIA. European Journal of Engineering and Technology, 4 (4). ISSN 2056-5860

Onawumi, A.S. and Dunmade, I.S. and Ajayi, O. O. and Sangotayo, E. O. and Oderinde, M. O. (2016) Investigation into House-Hold Energy Consumption in Saki, Southwestern Nigeria. International Journal of Scientific & Engineering Research, 7 (3). pp. 720-727. ISSN 2229-5518

Onawumi, A.S. and Dunmade, I.S. and Fajobi, Moses (2016) Anthropometry Survey of Nigerian Occupational Bus Drivers to Facilitate Sustainable Design of Driver’s Workplace. Sustainability in Energy and Buildings: Research Advances, 5 (1). pp. 1-10. ISSN 2054-3743

Onawumi, A.S. and Lucas, Emanuel Babajide (2012) Ergonomic assessment of taxicabs using participatory ergonomic intervention approach among Southwestern Nigerian drivers. Int. J. Manufacturing Technology and Management, 25 (1/2/3). pp. 33-44.

Onawumi, A.S. and Lucas, Emanuel Babajide (2012) THE PREVALENCE OF WORK-RELATED MUSCULOSKELETAL DISORDER AMONG OCCUPATIONAL TAXICABS DRIVERS IN NIGERIA. IJRRAS, 11 (3). pp. 1-8.

Onawumi , A. S (2016) Sitting Habit and Posture Investigation of Office Employees in Nigeria. International Journal of Emerging Trends in Engineering and Development , 3 (6). pp. 1-9. ISSN 2249 - 6149

Onawumi , A. S and Lucas, Emanuel Babajide (2012) Ergonomic Investigation of Occupational Drivers and Seat Design of Taxicabs in Nigeria. ARPN Journal of Science and Technology, 2 (3). pp. 214-220. ISSN 2225-7217

Ongbali, Samson O. and Afolalu, Sunday A. and Oyedepo, Sunday Olayinka and Inegbenebor, A.O. and Salawu, Enesi Y. (2021) The Role of Physical Distributionin Supply Chain Enterprise and the Accompanying Bottleneck Problems: A Review. Turkish Journal of Computer and Mathematics Education, 12 (13). pp. 3312-3318.

Ongbali, Samson O. and Afolalu, Sunday A. and Babalola, P.O. (2019) SUPPLY CHAIN MANAGEMENT AND THE ACCOMPANYING PROBLEMS IN PRODUCTION ENVIRONMENT: A REVIEW. International Journal of Mechanical Engineering and Technology, 10 (5). pp. 613-619. ISSN 0976-6340 and ISSN Online: 0976-6359

Oni, Babalola and Sanni, Samuel Eshorame and Daramola, M. O. and Olawepo, A.V (2021) Effects of oxy-acetylation on performance, combustion and emission characteristics of Botryococcus braunii microalgae biodiesel-fuelled CI engines. Fuel, 296 (15).

Oni, Babalola and Sanni, Samuel Eshorame and Ibegbu, Anayo Jerome and Aduojo, Ameloko Anthony (2021) Experimental optimization of engine performance of a dual-fuel compression-ignition engine operating on hydrogen-compressed natural gas and Moringa biodiesel. Energy Reports, 7. pp. 607-619.

Oni, Babalola Aisosa and Ayeni, .A. O. and Agboola, Oluranti and Oguntade, Tomiwa and Obanla, Oyinlola Mopelola (2020) Comparing microplastics contaminants in (dry and raining) seasons for OxBow Lake in Yenagoa, Nigeria. Ecotoxicology and Environmental Safety.

Oni, Babalola Aisosa and Sanni, Samuel Eshorame (2022) Cationic graphene-based polymer composite modified with chromium-based metal-organic framework [GP/MIL-53(Cr)] for the degradation of 2,4-dichlorophenol in aqueous solution. Materials Today Sustainability.

Oni, Babalola Aisosa and Sanni, Samuel Eshorame (2022) Occurrence of Microplastics in Borehole Drinking Water and Sediments in Lagos, Nigeria. Environmental Toxicology and Chemistry, 31. 1721-1731.. ISSN 1552-8618

Oni, Babalola Aisosa and Sanni, Samuel Eshorame and Alaba, Peter Adeniyi and Hessien, Mahmoud M. Hessien and El-Bahy, Zeinhom M. (2022) Investigating the performance of acetylated diethyl ether–Camelina sativa biodiesel as fuel in compression ignition engine. Energy, Ecology and Environment, 7. pp. 281-295.

Oni, Babalola Aisosa and Sanni, Samuel Eshorame and Dahunsi, S. O. (2022) Decaffeination of wastewater using activated carbon produced from velvet tamarind-pericarp (Dialium Guineense). International Journal of Phytoremediation, 24 (4).

Oni, Babalola Aisosa and Sanni, Samuel Eshorame and Ezurike, Benjamin O. and Okoro, Emeka Emmanuel (2022) Effect of corrosion rates of preheated Schinzochytrium sp. microalgae biodiesel on metallic components of a diesel engine. Alexandria Engineering Journal, 61 (10).

Oni, Babalola Aisosa and Sanni, Samuel Eshorame and Ibegbu, Anayo Jerome and Amoo, Temiloluwa Emmanuel (2022) Investigating the emissions and performance of hydrogen enriched-biogas-Parinari polyandra biodiesel in a direct injection (DI) engine. International Journal of Hydrogen Energy.

Oni, Babalola Aisosa and Sanni, Samuel Eshorame and Ibegbu, Anayo Jerome and Oguntade, Tomiwa (2022) Authentication of Styrax officinalis L. methyl ester nanoparticulate fuel-system’s suitability in powering CI engines. Industrial Crops & Products.

Oni, Babalola Aisosa and Sanni, Samuel Eshorame and Ibegbu, Anayo Jerome and Tomomewo, Olusegun Stanley (2023) Evaluation of engine characteristics of a micro-gas turbine powered with JETA1 fuel mixed with Afzelia biodiesel and dimethyl ether (DME). Renewable Energy, 216.

Oni, Babalola Aisosa and Sanni, Samuel Eshorame and Ibegbu, Anayo Jerome and Tomomewo, Olusegun Stanley and Dike, Humphrey Nwenenda (2023) Pyrolytic-gasification of biomass and plastic accompanied with catalytic sequential tar reformation into hydrogen-rich gas. Journal of the Energy Institute, 109.

Oni, Babalola Aisosa and Sanni, Samuel Eshorame and Okoro, Emeka Emmanuel (2022) Performance evaluation of Nannochloropsis oculate–carbon nanoparticle blend as fuel in compression ignition engine. Innovation for a sustainable economy, 16 (3).

Oni, Babalola Aisosa and Sanni, Samuel Eshorame and Okoro, Emeka Emmanuel (2021) Performance evaluation of Nannochloropsis oculate–carbon nanoparticle blend as fuel in compression ignition engine. Biofpr.

Oni, Babalola Aisosa and Sanni, Samuel Eshorame and Olabode, Oluwasanmi (2021) Production of fuel-blends from waste tyre and plastic by catalytic and integrated pyrolysis for use in compression ignition (CI) engines. Fuel.

Oni, Babalola Aisosa and Sanni, Samuel Eshorame and Orodu, O. D. (2022) Comparing the effects of Juliflora biodiesel doped with nano-additives on the performance of a compression ignition (CI) engine: Part A. Energy.

Oni, Babalola Aisosa and Sanni, Samuel Eshorame and Oyedepo, Sunday Olayinka and Ibegbu, Anayo Jerome (2022) Catalytic reforming of tar and volatiles from walnut shell pyrolysis over a novel Ni/olivine/La2O3 supported on ZrO2. Journal of the Energy Institute, 103. pp. 33-46.

Onokwai, A.O and Ajisegiri, E.S.A and Okokpujie, Imhade P. and Ibikunle, F. and Oki, M. and Dirisu, J. O. (2022) Characterization of lignocellulose biomass based on proximate, ultimate,structural composition, and thermal analysis. Materials Today, 65. pp. 2156-2162.

Onu, C and Kamalu, Ikenna C. and Nwakaudu, M.S. and Onyelucheya, O.E and Anyanwu, E.E (2016) The Influence of Biostimulator in the Remediation of Petroleum Sludge Polluted Clay Soil: The Concept of Moringa Application. International Journal of Advanced Engineering Research and Science (IJAERS), 3 (2). pp. 19-25. ISSN 2456-1908

Onuh, C.Y and Dosunmu, A. and Anawe, Paul Apeye Lucky and Agbator, S. (2019) EVALUATING THE PERFORMANCE OF CALOPHYLLUM INOPHYLLUM AND HURA CREPITANS PLANT OIL ON THE RHEOLOGICAL AND FILTRATION PROPERTIES OF WATER-BASED MUD. Petroleum and Coal, 61 (3). pp. 600-607. ISSN 1337-7027

Onuh, C.Y and Dosunmu, A. and Anawe, Paul Apeye Lucky and Efeovbokhan, Vincent Enon and Adebisi, Abimbola A. (2017) Transesterification of Non-Edible Vegetable Oil for Lubricant Applications in Water-Based Mud: A Review. International Journal of Applied Engineering Research, 12 (18). pp. 7397-7401. ISSN 0973-4562

Onuh, C.Y and Ogunkunle, Temitope and Rotimi, Oluwatosin J. and Enaworu, E. (2019) THE IMPACT OF PERFORATION GEOMETRY ON OIL WELL PRODUCTIVITY. International Journal of Mechanical Engineering and Technology, 10 (03). pp. 1900-1909. ISSN Print: 0976-6340 and ISSN Online: 0976-6359

Onuh, Haruna M. and David, O. Ogbe and Onuh, C.Y (2017) Modified reservoir quality indicator methodology for improved hydraulic flow unit characterization using the normalized pore throat methodology (Niger Delta field as case study). J Petrol Explor Prod Technol, 7. pp. 409-416.

Opeyemi, AK and Alege, P. O. and Ajayi, O. O. and Okodua, Henry (2017) Energy Pricing Policy and Environmental Quality in Nigeria: A Dynamic CGE Approach. International Journal of Energy Economics and Policy, 7 (1).

Orekan, Atinuke Adebimpe and Bello, Kehinde Asanot (2021) A Critical Evaluation of Conventional Methods of Appraisal and its Materiality on the Growth Explicit Models of Valuation. Covenant Journal of Research in the Built Environment, 9 (2). pp. 36-47. ISSN p. 2384-5724 e. 2384-5716

Orimogunje, Abidemi and Ajayi, Olumide O. and Fakolujo, Olaosebikan A. and Abolade, Jeremiah O. (2017) Adaptive Network Based Fuzzy Inference System Model For Minimizing Handover Failure in Mobile Networks. International Journal of Innovative Science and Research Technology, 2 (9). pp. 132-343. ISSN 2456 – 2165

Orisanmi, B.O and Afolalu, Sunday A. and Adetunji, Olajide R. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Akinyemi, I. O. and Abioye, Oluwabunmi P. (2017) Cost of Corrosion of Metallic Products in Federal University of Agriculture, Abeokuta. International Journal of Applied Engineering, 12 (24). pp. 14141-14147. ISSN 0973-4562

Orodu, O. D. and Ako, C. T. and Makinde, F. A. and Owarume, M. O. (2012) WELL DELIVERABILITY PREDICTIONS OF GAS FLOW IN GAS-CONDENSATE RESERVOIRS, MODELLING NEAR-CRITICAL WELLBORE PROBLEM OF TWO PHASE FLOW IN 1 -DIMENSION. BRAZILIAN JOURNAL OF PETROLEUM AND GAS, 6 (4). pp. 159-169. ISSN 1982-0593

Orodu, O. D. and Fadairo, A. S. A. and Enebeli, E. E. (2012) REALISTIC OPTIMIZATION OF WELL LENGTH FOR HORIZONTAL DRILLING. BRAZILIAN JOURNAL OF PETROLEUM AND GAS, 6 (2). 053-065. ISSN 1982-0593

Orodu, O. D. and Makinde, F. A. and Orodu, Kale B. (2012) Experimental Study of Darcy and Non-Darcy Flow in Porous Media. International Journal of Engineering and Technology, 2 (12). pp. 1934-1943. ISSN 2049-3444

Orodu, O. D. and Okoro, Emeka Emmanuel and Ijalaye, Oluwaseye K. and Orodu, O. D. (2019) Gas compressibility factor explicit correlations for range of pseudo reduced temperature and pressure. Flow Measurement and Instrumentation, 67. pp. 176-185.

Orodu, O. D. and Orodu, Kale B. and Afolabi, Richard Oyekunle and Dafe, Eboh A. (2018) Dataset on experimental investigation of gum arabic coated alumina nanoparticles for enhanced recovery of nigerian medium crude oil. Data in Brief. pp. 475-480. ISSN 2352-3409

Orovwode, H. E. and Wara, S.T. (2008) Automatic Voltage Stabilizers (AVSs) Causes Of Failures And Solutions. J.Sci.Engr.Tech, 15 (3). pp. 8502-8511.

Osamudiame, Omoregie and Nissi, Anthony Chisom and Oluwakayode, Odukomaiya Oluwademiladeogo and Oghoho, Uriewhu Victory and Daniel, Okeke Chukwuemeka and Smart, Ifon Princewill and Lemuel, Peter-Arome Chosen and Nwabeze, Osondu Raymond and Loto, R. T. (2023) Comparative Evaluation of the Protection Performance of Admixed Tea Tree and Grapefruit Essential Oil Extracts on Mild Steel and Alloy Steel 3310. Key Engineering Materials. pp. 127-134.

Osawaru, FAITH and Amusan, L. M. and Awotinde, Oladipupo Sunday and Akanya, Cinwosoko Ninma and ASIYANBOLA, OLATOMIDE DAVID and Akinbo, Faith (2018) Planning materials supply for construction works. International Conference on Science and Sustainable Development.

Osekhoghene, Dirisu Joseph and Oyedepo, Sunday Olayinka and Fayomi, O. S. I and Okokpujie, Imhade P. (2019) IGNITION TIME OF SELECTED CEILING MATERIALS AND ESCAPE TEMPERATURE TIME PREDICTION OF FIRE FIGHTER RESCUE MISSION. Journal of Chemical Technology and Metallurgy, 24 (1). pp. 64-71.

Oshin, Oluwadamilola and Luka, M. K. and Atayero, A. A. (2018) From 3GPP LTE to 5G: An Evolution. Transactions on Engineering Technologies. pp. 485-502.

Oshin, Oluwadamilola and Ogbonna, Ikechukwu and Moninuola, Funmilayo S. (2023) Development of a Visuomotor Augmentative Sensory Aid for Visually Impaired Persons. International Journal of Scientific Development and Research, 8 (11). pp. 52-60.

Oshin, Oluwadamilola and Oni, O.O. and Atayero, A. A. and Oshin, B. Leveraging MMW AVE Technology for Mobile Broadband/Internet of Things. Transactions on Engineering Technologies. pp. 507-514.

Osoka, E.C. and Kamalu, Ikenna C. (2010) Effect of Sodium Hydroxide Concentration on Kinetic Parameters during Gelatinisation. Journal of Emerging Trends in Engineering and Applied Sciences, 1 (1). pp. 5-8.

Osoka, E.C. and Kamalu, Ikenna C. (2012) A SMOKER EQUATION BASED ALGORITHM FOR BINARY DISTILLATION DESIGN CALCULATIONS. Research Journal in Engineering and Applied Sciences, 1 (5). pp. 338-341. ISSN 2276-8467

Osoka, E.C. and Njiribeako, I.A. and Olebunne, F.L and Kamalu, Ikenna C. (2012) Rate Modeling of Starch Gelatinization under Strong Alkali Conditions. International Journal of Science and Engineering Investigations, 1 (9). pp. 20-25. ISSN 2251-8843

Osuizugbo, Innocent Chigozie and Ojelabi, Rapheal A. (2020) Building production management practice in the construction industry in Nigeria. Engineering Management in Production and Services, 12 (2). pp. 56-73.

Osuizugbo, Innocent Chigozie and Oyeyipo, Opeyemi Olanrewaju and Ojelabi, Rapheal A. and Oshodi, Olalekan Shamsideen (2021) Factors Inhibiting Corporate Social Responsibility Initiatives Among Construction Companies. Construction Economics and Building, 21 (1). pp. 83-99.

Owamah, H.I. and Akpoedafe, Thomas Obaro and Ikpeseni, Sunday Chukwuyem and Atikpo, Eguakhide and Orugba, Henry Oghenero and Oyebisi, S.O (2023) Spatial distribution of heavy metals in groundwater around automobile workshops in a popular Niger-Delta University town, Nigeria. Journal of Engineering and Applied Science, 70 (79).

Owodolu, A.A. and Bolu, Christian and Abioye, Abiodun A. and Boyo, H.O. and Onyiagha, G. (2018) A Systematic Human Counting at Guest House using Sensing Device Technique. International Journal of Scientific and Research Publications, 8 (3). pp. 377-379. ISSN 2250-3153

Owolabi, J. D and Amusan, L. M. and Ajala, Oluwaseun T and Tunji-Olayeni, P .F and Peter, Nkolika Joy and Omuh, I. O. and Joshua, Opeyemi (2014) PERSPECTIVES ON EFFECTIVENESS OF GYPSUM BOARD OVER SANDCRETE BLOCK AS WALLING MATERIAL. International Journal of General Engineering and Technology (IJGET), 3 (4). pp. 1-10. ISSN 2278-9936

Owolabi, J. D and Amusan, L. M. and Oloke, C. Olayinka and Olusanya, O and Tunji-Olayeni, P .F and Owolabi, Dele and Peter, Nkolika Joy and Omuh, I. O. (2014) CAUSES AND EFFECT OF DELAY ON PROJECT CONSTRUCTION DELIVERY TIME. International Journal of Education and Research, 2 (4). pp. 197-208. ISSN 2201-6333 (Print) ISSN: 2201-6740 (Online)

Owolabi, J. D and Amusan, L. M. and Oluranti, Olupolola.O Comparative Analysis Of Incentives Provision In Foreign And Indigenous Firm And Its Impact On Productivity. South Pacific Journal Of Technology And Science, 2 (1). pp. 229-237. ISSN 2321-4597

Owolabi, J. D and Asiafa, C.O and Amusan, L. M. (2023) THE USE OF DRY CONSTRUCTION AND ITS APPLICATION ON SUSTAINABLE HOUSING IN NIGERIA. CORROSION AND PROTECTION, 51 (1). pp. 1122-1137. ISSN 1005-748X

Owolabi, R. U. and Osiyemi, N A and Amosa, M K and Ojewumi, M. E. Biodiesel from Household/Restaurant Waste Cooking Oil (WCO). Journal of Chemical Engineering & Process Technology, 2 (4). ISSN 2157-7048

Oyebanji, J.A. and Okekunle, P. O. and Fayomi, O. S. I (2020) Synthesis and characterization of zeolite-Y using Ficus exasperata leaf: A preliminary study. Case Studies in Chemical and Environmental Engineering, 2.

Oyebanji, J.A. and Oyedepo, Sunday Olayinka and Oyebanji, Olawumi T and Araoyinbo, Alaba and Kilanko, O. O and Dirisu, J. O. and Saleh, Bahaa (2023) Experimental investigation of heating values and chemical compositions of selected fuel woods as bio-fuel sources in developing countries. Fuel, 340.

Oyebisi, O. and Owamah, H.I. and Ede, A. N. (2021) Flexural optimization of slag-based geopolymer concrete beams modi�ed with corn cob ash. Sharif University of Technology, 28 (5). pp. 2582-2595.

Oyebisi, S.O and Alomayri, Thamer (2023) Artificial intelligence-based prediction of strengths of slag-ash-based geopolymer concrete using deep neural networks. Construction and Building Materials, 400.

Oyebisi, S.O and Alomayri, Thamer (2022) Cement-based concrete modified with Vitellaria Paradoxa ash: A lifecycle assessment. Construction and Building Materials.

Oyebisi, S.O and Alomayri, Thamer (2023) Potential application of artificial intelligence to the alpha and gamma radiation from agricultural byproducts used as building and construction materials. Scientific African, 21.

Oyebisi, S.O and Alomayri, Thamer (2022) Potential application of artificial intelligence to the alpha and gamma radiation from agricultural byproducts used as building and construction materials. Scientific African.

Oyebisi, S.O and Ede, A. N. and Ofuyatan, Olatokunbo M. and Oluwafemi, John and Akinwumi, I. I. (2018) Comparative study of corncob ash-based lateritic interlocking and sandcrete hollow blocks. International Journal of GEOMATE, 15 (51). pp. 209-216.

Oyebisi, S.O and Ede, A. N. and Ofuyatan, Olatokunbo M. and Oluwafemi, John and Olutoge, F. A. (2018) MODELING OF HYDROGEN POTENTIAL AND COMPRESSIVE STRENGTH OF GEOPOLYMER CONCRETE. International Journal of Civil Engineering and Technology (IJCIET), 9 (7). pp. 671-679. ISSN 0976-6316

Oyebisi, S.O and Ede, A. N. and Olutoge, F. A. and Ofuyatan, Olatokunbo M. and Oluwafemi, John (2018) INFLUENCE OF ALKALI CONCENTRATIONS ON THE MECHANICAL PROPERTIES OF GEOPOLYMER CONCRETE. International Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 734-743. ISSN 0976-6316

Oyebisi, S.O and Ede, A. N. and Olutoge, F. A. and Ofuyatan, Olatokunbo M. and Oluwafemi, John (2018) Influence of alkali concentrations on the mechanical properties of geopolymer concrete. International Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 734-743. ISSN 0976-6316

Oyebisi, S.O and Ede, A. N. and Olutoge, F. A. and Ogbiye, S. A. (2020) Evaluation of reactivity indexes and durability properties of slag-based geopolymer concrete incorporating corn cob ash. Construction and Building Materials, 258.

Oyebisi, S.O and Ede, A. N. and Olutoge, F. A. and Omole, D. O. (2020) Geopolymer concrete incorporating agro-industrial wastes: Effects on mechanical properties, microstructural behaviour and mineralogical phases. Construction and Building Materials, 256.

Oyebisi, S.O and Igba, Tobit and Oniyide, David (2019) Performance evaluation of cashew nutshell ash as a binder in concrete production. Case Studies in Construction Materials, 11.

Oyebisi, S.O and Igba, Tobit and Raheem, Akeem Ayinde and Olutoge, F. A. (2020) Predicting the splitting tensile strength of concrete incorporating anacardium occidentale nut shell ash using reactivity index concepts and mix design …. Case Studies in Construction Materials, 13.

Oyebisi, S.O and Okeke, C.A and Alayande, T and Oluwafemi, John (2022) Performance evaluation in a construction project: an empirical study of Canaan city housing estate, Ota, Nigeria. International Journal of Quality Engineering and Technology, 7 (4). pp. 385-405.

Oyebisi, S.O and Olutoge, F. A. and Ede, A. N. and Bankole, Faithfulness and Owamah, H.I. and Dike, Daniel (2023) Sustainability assessments of ternary mixed concrete: A cradle-to-gate analysis. materials today.

Oyebisi, S.O and Olutoge, F. A. and Kathirvel, Parthiban and Oyaotuderekumo, Increase and Lawanson, David and Nwani, Joy and Ede, A. N. and Kaze, Rodrigue (2020) Sustainability assessment of geopolymer concrete synthesized by slag and corncob ash. Case Studies in Construction Materials, 17.

Oyebisi, S.O and Olutoge, F. A. and Ofuyatan, Olatokunbo M. and Abioye, Abiodun A. (2017) Effect of corncob ash blended cement on the properties of lateritic interlocking blocks. Progress in Industrial Ecology, An International Journal, 11 (4). pp. 373-387. ISSN 1476-8917

Oyebisi, S.O and Olutoge, F. A. and Oyaotuderekumo, Increase and Bankole, Faithfulness and Owamah, H.I. and Mazino, Ugoh (2022) Effects of cashew nutshell ash on the thermal and sustainability properties of cement concrete. Heliyon.

Oyebisi, S.O and Olutoge, F. A. and Raheem, Akeem Ayinde and Dike, Daniel and Bankole, Faithfulness (2023) Sustainability assessment of cement concrete modified with bagasse ash and calcite powder. materials today, 86. pp. 1-6.

Oyebisi, S.O and Owamah, H.I. and Omeje, Maxwell (2023) Application of machine learning algorithm in the internal and external hazards from industrial byproducts. Cleaner Engineering and Technology, 13.

Oyebode, Oluwaseun and Babatunde, Damilola Elizabeth and Monyai, Chukwuka G. and Babatunde, Olubayo Moses (2019) Water demand modelling using evolutionary computation techniques: integrating water equity and justice for realization of the sustainable development goals. Heliyon.

Oyedepo, Sunday Olayinka (2013) Development of noise map for Ilorin metropolis, Nigeria. International Journal of Environmental Studies, 70 (4). pp. 503-514.

Oyedepo, Sunday Olayinka (2011) Estimation of global and diffuse solar radiations for se-lected cities in Nigeria. International Journal of Energy and Environmental Engineering, 2 (3). pp. 13-33. ISSN 2008-9163

Oyedepo, Sunday Olayinka (2012) Noise Pollution in Urban Areas: The Neglected Dimensions. Environmental Research Journal, 6 (4). pp. 259-271. ISSN 1994-5396

Oyedepo, Sunday Olayinka (2012) Noise Pollution in Urban Areas: The Neglected Dimensions. Environmental Research Journal, 6 (4). ISSN 1994-5396

Oyedepo, Sunday Olayinka and Adekeye, T. and Leramo, R.O. and Kilanko, O. O and Babalola, P.O. and Balogun, A. O. and Akhibi, M. O. (2016) Assessment of Energy Saving Potentials in Covenant University, Nigeria. Energy Engineering, 113 (3). pp. 7-26.

Oyedepo, Sunday Olayinka and Adeyemi, Gideon Adewale and Fayomi, O. S. I and Fagbemi, O.K. and Solomon, R. and Adekeye, T. and Babalola, P.O. and Akinyemi, M. L. and Olawole, C. Olukunle and Joel, E. S. and Nwanya, S.C. (2019) Dataset on noise level measurement in Ota metropolis, Nigeria. Data in Brief, 22. pp. 762-770.

Oyedepo, Sunday Olayinka and Adeyemi, Gideon Adewale and Olawole, C. Olukunle and Olawole, O.I. and Fagbemi, O.K. and Solomon, R. and Ongbali, Samson O. and Babalola, P.O. and Dirisu, Joy Favour and Efemwenkiekie, K. U. and Adekeye, T. and Nwaokocha, Collins N. (2019) A GIS – based method for assessment and mapping of noise pollution in Ota metropolis, Nigeria. MethodsX, 6. pp. 447-457.

Oyedepo, Sunday Olayinka and Ezeuduji, D. and Araoyinbo, Alaba and Kilanko, O. O and Efemwenkiekie, K. U. and Dirisu, J. O. (2022) Numerical modeling of heat transfer performance and optimization of car radiator using (H2O/Al2O3) nanofluids as coolant. International Journal of Computation and Methodology, 82 (5).

Oyedepo, Sunday Olayinka and Fagbenle, Olabosipo I. and Babarinde, T.O. and Odunfa, K. M. and Leramo, R.O. and Babalola, P.O. and Kilanko, O. O and Oyegbile, A.D and Lawson-Jack, D (2016) Thermodynamic Performance Analysis and Optimization of Domestic Refrigerator with Varying Refrigerant Charge and Capillary Tube Lengths. Energy Procedia. pp. 1-6.

Oyedepo, Sunday Olayinka and Fagbenle, R. O. and Adefila, S. S, (2015) Assessment of performance indices of selected gas turbine power plants in Nigeria. Energy Science & Engineering. pp. 239-256.

Oyedepo, Sunday Olayinka and Fagbenle, R. O. and Adefila, S. S, and Alam, Md. M (2015) Exergoeconomic analysis and performance assessment of selected gas turbine power plants. World Journal of Engineering and Pure and Applied Sci., 12 (3). ISSN 2249-0582

Oyedepo, Sunday Olayinka and Fagbenle, R. O. and Adefila, S. S, and Alam, Md. M (2016) Exergoenvironomic modelling and performance assessment of selected gas turbine power plants. World Journal of Engineering, 13 (2). pp. 149-162. ISSN 1708-5284

Oyedepo, Sunday Olayinka and Fagbenle, R. O. and Babarinde, T.O. and Odunfa, K. M. and Leramo, R.O. and Ohunakin, O.S. and Ajayi, O. O. and Babalola, P.O. and Kilanko, O. O and Oyegbile, A.D and Lawson-Jack, D (2017) A COMPARATIVE STUDY ON THE PERFORMANCE OF THE DOMESTIC REFRIGERATOR USINGR600A AND LPG WITH VARYING REFRIGERANT CHARGE AND CAPILLARY TUBE LENGTH. International Journal of Energy for a Clean Environment, 18 (4). pp. 287-302.

Oyedepo, Sunday Olayinka and Fagbenle, Richard Olayiwola (2011) A Study of Implementation of Preventive Maintenance Programme in Nigeria Power Industry—Egbin Thermal Power Plant, Case Study. Energy and Power Engineering, 3. pp. 207-220.

Oyedepo, Sunday Olayinka and Fakeye, B. A. (2021) WASTE HEAT RECOVERY TECHNOLOGIES: PATHWAY TO SUSTAINABLE ENERGY DEVELOPMENT. Journal of Thermal Engineering, 7 (1). pp. 324-348.

Oyedepo, Sunday Olayinka and Uwoghiren, Theophilus and Babalola, P.O. and Nwanya , Stephen and Kilanko, O. O and Leramo, R.O. and Aworinde, Abraham K. and Adekeye, T. and Oyebanji, J.A. and Abidakun, O.A. (2019) Assessment of Decentralized Electricity Production from Hybrid Renewable Energy Sources for Sustainable Energy Development in Nigeria. Research Article. pp. 72-89. ISSN 1469- 8080

Oyekunle, D. T. and Oguntade, Tomiwa and Ita, Christiana S. and Ojo, Temiloluwa and Orodu, O. D. (2019) Corrosion inhibition of mild steel using binary mixture of sesame and castor oil in brine solution. Materials Today Communications, 21.

Oyeyemi, Kehinde D. and Olofinnade, O. M. and Aizebeokhai, A. P. and Sanuade, O. A. and Oladunjoye, M.A and Ede, A. N. and Adagunodo, T. A. and Ayara, Williams A. (2019) Geoengineering site characterization for foundation integrity assessment. Cogent Engineering.

Oyeyipo, Opeyemi and Adeyemi, Bamidele and Osuizugbo, Innocent Chigozie and Ojelabi, Rapheal A. (2020) Service quality of building services consultants in building project delivery; clients’ perspectives. INTERNATIONAL JOURNAL OF CONSTRUCTION MANAGEMENT.

Oyeyipo, Opeyemi and Odeyinka, Henry A. and Owolabi, J. D and Afolabi, A.O. and Ojelabi, Rapheal A. (2018) Survey dataset on the impact of stakeholder's relationship on the academic performance of engineering students. Data in Brief, 17. pp. 1355-1360.

Oyeyipo, Opeyemi and Odusami, K. T. and Ojelabi, Rapheal A. and Afolabi, A.O. (2016) Factors Affecting Contractors' Bidding Decisions for Construction Projects in Nigeria. Journal of Construction in Developing Countries, 21 (2). pp. 21-35.

Oyinbo, S. T. and Ikumapayi, O. M. and Ajiboye, J.S and Afolalu, Sunday A. (2015) Numerical Simulation of Axisymmetric and Asymmetric Extrusion Process Using Finite Element Method. International Journal of Scientific & Engineering Research, 6 (6). p. 1246. ISSN 2229-5518

Ozuomba, S. and Wara, S.T. and Kalu, C. and Oboma, S. O. (2006) Computer Aided Design Of The Magnetic Circuit Of A 3- Phase Power Transformer. lfe Journal of Technology, 15 (2). pp. 99-108.

Palanisamy, Murthi and Kolandasamy, Poongodi and Awoyera, P. O. and Gobinath, Ravindran and Muthusamy, Sivaraja and Krishnasamy, Thirumalai Raja and Viloria, Amelec (2020) Permeability properties of lightweight self-consolidating concrete made with coconut shell aggregate. j m a t e r r e s t e c h n o l, 3 (9). pp. 3547-3557.

Paul, Samuel Sunday and Oyedepo, Sunday Olayinka and Adaramola, Muyiwa S (2012) Economic assessment of water pumping systems using wind energy conversion systems in the southern part of Nigeria. ENERGY EXPLORATION & EXPLOITATION, 30 (1). pp. 1-18.

Pillay, Deveshan L. and Olalusi, Oladimeji B. and Kiliswa, Moses W. and Awoyera, P. O. and Kolawole, John Temitope and Babafemi, A. J (2022) Engineering performance of metakaolin based concrete. Cleaner Engineering and Technology, 6.

Popoola, A. P. I. and Abdulwahab, M and Fayomi, O. S. I (2012) Corrosion Inhibition of Mild Steel in Sesamum indicum -2M HCl/H2SO4 Interface. International Journal of ELECTROCHEMICAL SCIENCE, 7. 5805- 5816.

Popoola, A. P. I. and Abdulwahab, M and Fayomi, O. S. I (2012) Synergetic performance of palm oil (Elaeis guineensis) and pine oil (Pinus sylvestris) as binders on foundry core strength. International Journal of the Physical Sciences, 7 (24). pp. 3062-3066. ISSN 1992 - 1950

Popoola, A. P. I. and Aigbodion, V.S. and Fayomi, O. S. I (2015) ANTI-CORROSION COATING OF MILD STEEL USING TERNARY Zn-ZnO-Y2O3 ELECTRO-DEPOSITON. Surface & Coatings Technology.

Popoola, A. P. I. and Aigbodion, V.S. and Fayomi, O. S. I (2016) Surface characterization, mechanical properties and corrosion behaviour of ternary based ZneZnOeSiO2composite coating of mild steel. Journal of Alloys and Compounds, 654. pp. 561-566.

Popoola, A. P. I. and Aigbodion, V.S. and Fayomi, O. S. I and Abdulwahab, M (2015) Experimental Study of the Effect of Siliconizing Parameters of Thermochemical Treatment of low Carbon Steel. Silicon. ISSN 1876-990X

Popoola, A. P. I. and Daniyan, A. A. and Umoru, L. E. and Fayomi, O. S. I (2017) Effect of WO3 Nanoparticle Loading on the Microstructural, Mechanical and Corrosion Resistance of Zn Matrix/TiO2-WO3 Nanocomposite Coatings for Marine Application. J. Marine Sci. Appl, 16. pp. 1-8.

Popoola, A. P. I. and Fayomi, O. S. I (2011) Electrochemical Study of Zinc Plate in Acid Medium: Inhibitory Effect of Bitter Leaf (Vernonia Amygdalina). International Journal of ELECTROCHEMICAL SCIENCE, 6. pp. 4581-4592.

Popoola, A. P. I. and Fayomi, O. S. I (2011) Environmental Failure of 2M Acid Strength on Zinc Electroplated Mild Steel in the Presence of Nicotioana Tobacum. International Journal of ELECTROCHEMICAL SCIENCE, 6. 4798 -4810.

Popoola, A. P. I. and Fayomi, O. S. I (2011) Environmental failure of 2 M acid strength on zinc electroplated mild steel in the presence of Nicotiana Tobacum. Scientific Research and Essays, 6 (14). pp. 3079-3088. ISSN 1992-2248

Popoola, A. P. I. and Fayomi, O. S. I (2011) Performance Evaluation of Zinc Deposited Mild Steel in Chloride Medium. International Journal of ELECTROCHEMICAL SCIENCE, 6. 3254 - 3263.

Popoola, A. P. I. and Fayomi, O. S. I (2011) ZnO as corrosion inhibitor for dissolution of zinc electrodeposited mild steel in varying HCl concentration. International Journal of the Physical Sciences, 6 (10). pp. 2447-2454. ISSN 1992 - 1950

Popoola, A. P. I. and Fayomi, O. S. I and Abdulwahab, M (2012) Degradation Behaviour of Aluminium in 2M HCl/HNO3 in the Presence of Arachis hypogeae Natural Oil. International Journal of ELECTROCHEMICAL SCIENCE, 7. 5817 - 5827.

Popoola, A. P. I. and Fayomi, O. S. I and Aigbodion, V.S. and Abdulwahab, M (2015) Surface modification, strengthening effect and electrochemical comparative study of Zn-Al2O3-CeO3 and Zn-TiO2-CeO3 coating on mild steel. Int J Adv Manuf Technol.

Popoola, A. P. I. and Fayomi, O. S. I and Popoola , M.O. (2012) Comparative Studies of Microstructural, Tribological and Corrosion Properties of Plated Zn and Zn-alloy Coatings. International Journal of ELECTROCHEMICAL SCIENCE, 7. 4860 - 4870.

Popoola, A. P. I. and Fayomi, O. S. I and Popoola , M.O. (2012) Electrochemical and Mechanical Properties of Mild Steel Electro-plated with Zn-Al. International Journal of ELECTROCHEMICAL SCIENCE, 7. 4898 - 4917.

Popoola, A. P. I. and Malatji, N. and Fayomi, O. S. I (2016) Fabrication and investigation of thermal and wear properties of zinc novel coati ngs reinforced with nano-Al2O3 and Cr2O3 pa rticles. Arch. Metall. Mater, 61 (3).

Prasath, Palaniappan and Shanmugam, Balaji and Awoyera, P. O. (2023) Behaviour of Stainless-Steel Fibre-Reinforced Exterior Beam�Column Joints under Reverse Cyclic Loading. Advances in Civil Engineering.

Qadwe, AP and Leonard, LS and Selele, M and Olukanni, D. O. and Mkandawire, T (2022) Biogas production potential from co-digestion of composted faecal sludge mixed with rice husks and sawdust. Building Smart, Resilient and Sustainable Infrastructure in Developing Countries: Proceedings of the 8th International Conference on Development and Investment in Infrastructure.

Qadwe, AP and Leonard, LS and Selele, M and Olukanni, DO and Mkandawire, T (2022) Biogas production potential from co-digestion of composted faecal sludge mixed with rice husks and sawdust. Building Smart, Resilient and Sustainable Infrastructure in Developing Countries: Proceedings of the 8th International Conference on Development and Investment in Infrastructure (DII-2022, Johannesburg, South Africa, 6–7 October 2022).

ROSDIADEE, NORDIN and Anabi, Hilary Kelechi and Mohd, Hazree Easa and Syahiran, Ahmad and Sameh, Musleh (2016) Empirical Study on Performance Evaluation Between Long Term Evolution (LTE), Third Generation (3G) and TV White Space Availability for Wireless Campus Network. International Journal of Simulation: Systems, Science and Technology, 17 (32). 25.1-25.9. ISSN 1473-804x online, 1473-8031 print

Raheem, AA and Adenuga, O.A and Afolabi, A.O. (2011) Characteristics of Concrete Produced with Lagoon and Atlantic Ocean Water. Journal of Engineering and Applied Sciences, 6 (4). pp. 262-267. ISSN 1816-949X

Raheem, Akeem Ayinde and Ikotun, Bolanle and Oyebisi, S.O and Ede, A. N. (2023) Machine learning algorithms in wood ash-cement-Nano TiO2-based mortar subjected to elevated temperatures. Results in Engineering, 18.

Raheem, Akeem Ayinde and Ikotun, Bolanle and Oyebisi, S.O and Ede, A. N. (2022) Machine learning algorithms in wood ash-cement-Nano TiO2-based mortar subjected to elevated temperatures. Results in Engineering, 18.

Raheem, Akeem Ayinde and Oyebisi, S.O and AKINTAYO, Stephen Oluyemi and OYENIRAN, Mutiu Iyiola (2010) Effects of Admixtures on the Properties of Corn Cob Ash Cement Concrete. Leonardo Electronic Journal of Practices and Technologies, 16. pp. 13-20. ISSN 1583-1078

Raji, Ameenat Abiodun and Alaba, Peter Adeniyi and Yusuf, Hindatu and Bakar, Noor Hidayati Abu and Taufek, Norhidayah Mohd and Muin, Hasniyati and Alias, Zazali and Milow, Pozi and Razak, Shaharudin Abdul (2018) Fishmeal replacement with Spirulina Platensis and Chlorella vulgaris in African catfish (Clarias gariepinus) diet: Effect on antioxidant enzyme activities and haematological parameters. Research in Veterinary Science, 119. pp. 67-75.

SOWUNMI, AKINLEYE OLAMILEKAN and Efeovbokhan, Vincent Enon and Orodu, O. D. and Olabode, O.A. and Oputa, Alma Jamachi (2022) Comparative Study of Biopolymer Flooding: A Core Flooding and Numerical Reservoir Simulator Validation Analysi. Hindawi.

SOWUNMI, AKINLEYE OLAMILEKAN and Orodu, O. D. and Efeovbokhan, Vincent Enon and Ogundare, Solomon (2020) Comparative dataset on the characterization of natural polymers and nanocomposites for enhanced oil recovery. Data in Brief. ISSN 2352-3409

Sadiku, Oluranti and Kolesnikov, Andrei (2011) Control of Nanoparticle Growth in High Temperature Reactor: Application of Reduced Population Balance Model II. Journal of Computational and Theoretical Nanoscience, 8. pp. 8-16.

Sadiku, Oluranti and Kolesnikov, Andrei (2010) Control of Nanoparticle Growth in High Temperature Reactor: Application of Reduced Population Balance Model. Journal of Computational and Theoretical Nanoscience, 7. pp. 571-576.

Sadiku, Oluranti and Sadiku, Rotimi Emmanuel (2010) Numerical Simulation for Nanoparticle Growth in Flame Reactor and Control of Nanoparticles. Journal of Computational and Theoretical Nanoscience, 7. pp. 1-9.

Sadiku, Oluranti and Sadiku, Rotimi Emmanuel (2011) Numerical Study on Mechanism of Nanoparticle Formation in High Temperature Reactor. Nanoscience and Nanotechnology Letters, 3. pp. 763-768.

Sadiku-Agboola, O. and Sadiku, Rotimi Emmanuel and Adegbola, Adesola Taoreed and Biotidara, O.F. (2011) Rheological Properties of Polymers: Structure and Morphology of Molten Polymer Blends. Materials Sciences and Applications, 2. pp. 30-41.

Salami, A. W. and Mohammed, A. and Olukanni, D. O. (2015) A Review of Models for Evaluation of Climate Change Impact on Water Resources. British Journal of Applied Science & Technology, 8 (3). pp. 226-237. ISSN 2231-0843

Salawu, E. O. and Adeeyo, O.A. and Falokun, Olutunde P and Yusuf, Uthman A and Oyerinde, Abiodun and Adeleke, Anthony (2009) Tomato ( Lycopersicon esculentum ) prevents lead-induced testicular toxicity. Journal of Human Reproductive Sciences, 2 (1). pp. 30-34.

Salawu, Enesi Y. and Adediran, A. A. and Ajayi, O. O. and Inegbenebor, A.O. and Dirisu, J. O. (2022) On the analyses of carbon atom diffused into grey cast iron during carburisation process. scientific reports.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. (2019) TURBULENCE FLOW SIMULATION OF MOLTEN METALS IN RUNNERS FOR DEFECT CONTROL IN CASTING OF A SPUR GEAR BLANK. International Journal of Mechanical Engineering and Technology, 10 (1). pp. 1921-1933. ISSN 0976-6359

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Afolalu, Sunday A. and Ongbali, Samson O. (2018) PARETO ANALYSIS OF PRODUCT QUALITY FAILURES AND COST EFFECTS IN BOTTLING MACHINES-A LEAN THINKING SOLUTION FOR ALCOHOL INDUSTRY. International Journal of Mechanical Engineering and Technology, 9 (11). pp. 2380-2388. ISSN 0976-6340 and ISSN Online: 0976-6359

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. (2019) MICRO-STRUCTURAL AND MECHANICAL CHARACTERIZATION OF PULVERIZED WOOD CHARCOAL AND EGG-SHELL AS ORGANIC CARBON ADDITIVES FOR GREY CAST IRON CARBURIZATION. International Journal of Mechanical and Production Engineering Research and Development, 9 (6). pp. 391-398. ISSN 2249–8001

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Akinlabi, Esther T. and Ishola, Felix (2019) Influence of Von Mises Stress on the Deformation behaviour of a Pinion Spur Gear under Cyclic Loading in a Bottling Machine: An Approach for predicting surface Fatigue failure in Gears. International Journal of Engineering Research and Technology, 12 (12). pp. 2207-2211. ISSN 0974-3154

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Popoola, A. P. I. and Akinlabi, Esther T. and Omotosho, Olugbenga Adeshola and Uyor, U. O. (2020) Electrochemical study and gravimetric behaviour of gray cast iron in varying concentrations of blends as alternative material for gears in ethanol environment. Journal of Materials Research and Technology, 9 (4). pp. 7529-7539.

Salawu, Enesi Y. and Ajayi, O. O. and Okeniyi, Joshua Olusegun and Inegbenebor, A.O. and Afolalu, Sunday A. and Ongbali, Samson O. and Banjo, SolomonO. (2021) On the prediction of power loss in helical gearbox via simulation approach. Cleaner Engineering and Technology, 3. pp. 1-6.

Salawu, Enesi Y. and Ajayi, O. O. and Olatunji, O. O. (2015) Theoretical Modelling Of Thermal-Hoop Stress Around The Tooth Of A Spur Gear In A Filler Machine. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2 (2). pp. 1635-1640. ISSN 3159-0040

Samuel, I. A. and Adetiba, E. and Odigwe, I. A. and Felly-Njoku, Firstlady C. (2017) A Comparative Study of Regression Analysis and Artificial Neural Network Methods for Medium-Term Load Forecasting. Indian Journal of Science and Technology, 10 (10). ISSN 0974-5645

Samuel, I. A. and Airoboman, A.E and Adewale, Adeyinka A. and Ajaka, Chiamaka (2017) Design And Implementation of Android Based Voip System for Noise Pollution Control. International Journal of Current Trends in Engineering & Research (IJCTER, 3 (3). pp. 51-59. ISSN 2455–1392

Samuel, I. A. and Awelewa, A. A. and Adetiba, E. and Agbetuyi, Ayoade F. and Katende, J. (2013) An Electronic Protection Unit for Diesel Engine Standby Generators. Innovative Systems Design and Engineering, 4 (13). pp. 1-7. ISSN 2222-1727 (Paper) ISSN 2222-2871 (Online)

Samuel, I. A. and Chihurumanya, Felly-Njoku and Adewale, Adeyinka A. and Awelewa, A. A. (2014) Medium-Term Load Forecasting Of Covenant University Using The Regression Analysis Methods. Journal of Energy Technologies and Policy, 4 (4). ISSN 2224-3232 (Paper) ISSN 2225-0573 (Online)

Samuel, I. A. and Ekundayo, Segun and Awelewa, A. A. and Somefun, Tobilola Emmanuel and Adewale, Adeyinka A. (2019) Artificial Neural Network Base Short-term Electricity Load Forecasting: A Case Study of a 132/33 kv Transmission Sub-station. International Journal of Energy Economics and Policy, 10 (2). pp. 200-205. ISSN 2146-4553

Samuel, I. A. and Katende, J. and Awosope, C. O. A. and Awelewa, A. A. (2017) Prediction of Voltage Collapse in Electrical Power System Networks using a New Voltage Stability Index. International Journal of Applied Engineering Research, 12 (2). pp. 190-199. ISSN 0973-4562

Samuel, O.D. and Isiaka, I.O. and Omoleye, James (2012) Development and Properties Test of Aluminum Grease for Low Velocity Applications. The Pacific Journal of Science and Technology, 13 (1). pp. 112-120.

Sam‑Marcus, Jethro and Enaworu, E. and Rotimi, Oluwatosin J. and Seteyeobot, Ifeanyi (2018) A proposed solution to the determination of water saturation: using a modelled equation. Journal of Petroleum Exploration and Production Technology. pp. 1-7.

Sani, Yahaya Muhammad and Alaba, Peter Adeniyi and Raji-Yahya, Aisha Olatope and Aziz, A.R.Abdul and Daud, Wan Mohd Wan (2015) Acidity and catalytic performance of Yb-doped SO2−4/Zr in comparison with SO2−4/Zrcatalysts synthesized via different preparatory conditions for biodiesel production. Journal of theTaiwan Institute of Chemical Engineers. pp. 1-10.

Sani, Yahaya Muhammad and Alaba, Peter Adeniyi and Raji-Yahya, Aisha Olatope and Aziz, A.R.Abdul and Daud, Wan Mohd Wan (2015) Facile synthesis of sulfated mesoporous Zr/ZSM-5 with improved Brønsted acidity and superior activity over SZr/Ag,SZr/Ti,and SZr/W in transforming UFO into biodiesel. Journal of the Taiwan Institute of Chemical Engineers, 13 (48). pp. 1-11.

Sanni, O. and Popoola, A. P. I. and Fayomi, O. S. I (2019) Electrochemical Analysis of Austenitic Stainless Steel (Type 904) Corrosion Using Egg Shell Powder in Sulphuric Acid Solution. Energy Procedia, 157. pp. 619-625. ISSN 18766102

Sanni, O. and Popoola, A. P. I. and Fayomi, O. S. I (2018) Enhanced corrosion resistance of stainless steel type 316 in sulphuricacid solution using eco-friendly waste product. Results in Physics (9). pp. 225-230.

Sanni, O. and Popoola, A. P. I. and Fayomi, O. S. I (2018) The inhibitive study of egg shell powder on uns n08904 austenitic stainless steel corrosion in chloride solution. Defence Technology, 14. pp. 463-468.

Sanni, O. and Popoola, A. P. I. and Fayomi, O. S. I and Fatoba, OS (2017) Silicone oil as corrosion inhibitor for aluminium alloy in saline medium. International Journal of Microstructure and Materials Properties, 12 (1-2). pp. 115-125.

Sanni, Samuel Eshorame and Adefila, S. S, and Anozie, Ambrose Nwora (2018) Prediction of sand kinematic pressure and fluid-particle interaction coefficient as means of preventing sand-induced corrosion in crude oil pipelines. Ain Shams Engineering Journal.

Sanni, Samuel Eshorame and Adefila, S. S, and Anozie, Ambrose Nwora and Agboola, Oluranti (2017) Mechanisms for Controlling Sand-Induced Corrosion in Horizontal Pipe Flow of Sand, Crude Oil and Water. The Open Petroleum Engineering Journal, 10. pp. 220-238.

Sanni, Samuel Eshorame and Akinrinola, Olasubomi and Yusuf, Esther Ojima and Fagbiele, Omololu Oluwatobi and Agboola, Oluranti (2018) Chemical Kinetics of Alkaline Pretreatment of Napier Grass (Pennisetum purpureum) Prior Enzymatic Hydrolysis. The Open Chemical Engineering Journal, 12. pp. 36-56.

Sanni, Samuel Eshorame and Emetere, Moses (2016) Mathematical Modelling of insitu-Bioremediation of Crude Oil Polluted Soil. Science and Engineering Applications, 1 (4). pp. 27-32. ISSN 2456-2793

Sanni, Samuel Eshorame and Olawale, Surajudeen Adegboyega and Adefila, S. S, and Emetere, Moses (2015) Theoretical Study of Sand Entrainment and Deposits in Horizontal Oil Transport. Science Research, 3 (6 ). pp. 314-323. ISSN 2329-0935(Print) 2329-0927 (Online)

Sanni, Samuel Eshorame and Olofin, Precious and Okoro, Emeka Emmanuel and Oni, Babalola Aisosa UNSPECIFIED

Sanni, Samuel Eshorame and Philemon, Olowoyeye and Okoro, Emeka Emmanuel and Oni, Babalola Aisosa and Idowu, Tijani A. and Adegbite, Oluwatosin (2022) Heterogeneous catalytic conversion of 4-chlorophenol via atomic hydrogen substitution induced by size-controlled polydisperse nanocobal. Chemical Engineering Science.

Sanni, Samuel Eshorame and Vershima, Ashiekaa D. and Okoro, Emeka Emmanuel and Oni, Babalola Aisosa (2022) Technological advancements in the use of ionic liquid- membrane systems for CO2 capture from biogas/flue gas - A review. Heliyon, 8. ISSN 2405-8440

Seidu, S. O. and Joshua, T.O and Fayomi, O. S. I (2016) In-situ Behaviour of Selected Local Sand Binders on Microstructure and Mechanical Properties of Grey Cast Iron. J. Mater. Environ. Sci., 7 (4). pp. 1135-1144. ISSN 2028-2508

Sekoai, Patrick Thabang and Awosusi, A. A. and Yoro, Kelvin O. and Singo, Muofhe and Oloye, Olawale and Ayeni, .A. O. and Bodunrin, Michael and Daramola, Michael Olawale (2017) Microbial cell immobilization in biohydrogen production: a short overview. CRITICAL REVIEWS IN BIOTECHNOLOGY.

Seteyeobot, Ifeanyi and Enaworu, E. and Afolabi, Richard Oyekunle and Ogunkunle, T.F. Phase Behaviour Prediction and Pressure Decline of High Pressure Condensate Systems Using Peng Robinson’s Equation of State. International Journal of Applied Engineering Research. ISSN 0973-4562 (Submitted)

Seteyeobot, Ifeanyi and Orodu, O. D. and Anawe, Paul Apeye Lucky and Enaworu, E. and Onuh, C.Y (2017) Modelling the Effect of Composition Change during Condensate Dropout in a Horizontal Gas Well. International Journal of Applied Engineering Research, 12 (2). pp. 179-189. ISSN 0973-4562

Shomefun, Tobi and Ademola, A. and Awosope, C. O. A. and Adekitan, Aderibigbe I. (2018) Critical Review of Different Methods for Siting and Sizing Distributed-generators. TELKOMNIKA, 16 (5). pp. 2395-2405. ISSN 1693-6930

Shomefun, Tobi and Awosope, C. O. A. and Ebenezer, O.D. (2018) Microcontroller-based Vertical Farming Automation System. International Journal of Electrical and Computer Engineering (IJECE), 8 (4). pp. 2046-2053.

Shyamala, G and Jeyanthi, J and Gobinath, R and Akinwumi, I. I. and Maheswari, M (2017) Assessment of groundwater quality using spatial variation technique. Journal of Chemical and Pharmaceutical Sciences, 10 (4). pp. 9-15.

Simon, R.F. and Adeboye, A. B. and Fulani, O. (2013) Achieving healthy environmental sustainability in Ota housing core. S Journals, 1 (8). pp. 1-11.

Simon, R.F. and Adeboye, A. B. and Oloke, C. Olayinka (2013) Campus design and symbolic Order in Contemporary Nigeria: A Case Study of Covenant University Campus, Ota. Nigeria. Scottish Journal of Arts, Social Sciences and Scientific Studies. pp. 17-32. ISSN 2047-1278

Siyanbola, T. O. and Adebowale, Adedamola D. and Adeboye, S.A. and Rao, Spandana J.V. and Ndukwe, Nelly A. and Sodiya, F.E and Ajayi, Adesola A. and Akintayo, E. T. and Basak, P. and Narayan, Ramanuj (2023) Development of functional polyurethane-cenosphere hybrid composite coatings from ricinus communis seed oil. Scientific African, 20.

Somefun, Tobilola Emmanuel and Abdulkareem, Ademola and Awosope, C. O. A. and Akanji, O. (2022) Smart home comfort and energy conservation using internet of things. TELKOMNIKA Telecommunication, Computing, Electronics and Control, 20 (2). pp. 357-365. ISSN 1693-6930

Somefun, Tobilola Emmanuel and Abdulkareem, Ademola and Awosope, C. O. A. and Somefun, C.T. and Ipinyemi, O. (2019) Android-Based Attendance System. International Journal of Software Engineering and Technology, 11 (8). pp. 132-139. ISSN 0974-9748

Somefun, Tobilola Emmanuel and Abdulkareem, Ademola and Awosope, C. O. A. and somefun, C.T. and Ipinyemi, O. (2019) Android-Based Attendance System. International Journal of Software Engineering and Technology, 11 (8). pp. 132-139.

Somefun, Tobilola Emmanuel and Awosope, C. O. A. and Abdulkareem, Ademola and Adeleye, Daniel (2019) DEPLOYMENT OF SMART STREET LIGHTING SYSTEM USING SENSORS. IoT Sensors, Microcontroller, Automation, Smart city, Street lighting, 10 (4).

Somefun, Tobilola Emmanuel and Awosope, C. O. A. and Abdulkareem, Ademola and Alayande, A. S. (2020) Deployment of Power Network Structural Topology to Optimally Position distributed Generator within Distribution System. Journal of Engineering Science and Technology Review, 13 (1). pp. 12-17.

Somefun, Tobilola Emmanuel and Awosope, C. O. A. and Abdulkareem, Ademola and Ojo, Joseph and Amuta, Elizabeth and Sanni, T.F. (2020) Cost implications analysis of grid supplied electricity and solar source of electricity in Nigeria. TELKOMNIKA Telecommunication, Computing, Electronics and Control, 18 (6). pp. 3258-3265. ISSN 1693-6930

Somefun, Tobilola Emmanuel and Awosope, C. O. A. and Abdulkareem, Ademola and Okpon, E. and Alayande, A. S. and somefun, C.T. (2020) Design and Implementation of Density-Based Traffic Management System. International Journal of Engineering Research and Technology, 13 (9). pp. 2157-2164. ISSN 0974-3154

Somefun, Tobilola Emmanuel and Awosope, C. O. A. and Sika, C. (2020) Development of a research project repository. TELKOMNIKA, 18 (1). pp. 156-165. ISSN 1693-6930

Somefun, Tobilola Emmanuel and Babayomi, Oluleke O. and Awosope, C. O. A. and Abdulkareem, Ademola and somefun, C.T. (2020) Software For Improved Online Teaching Of Power System Analysis For Undergraduates. PES/IAS PowerAfrica.

Somefun, Tobilola Emmanuel and Popoola, Olawale and Abdulkareem, Ademola and Awelewa, A. A. (2022) Review of Different Methods for Siting and Sizing Distributed Generator. International Journal of Energy Economics and Policy, 12 (3). pp. 16-31. ISSN 2146-4553

Soulouknga, Marcel Hamda and Oyedepo, Sunday Olayinka and Doka, Serge Yamigno and Kofane, Timoleon Crépin (2020) Evaluation of the cost of producing wind‑generated electricity in Chad. International Journal of Energy and Environmental Engineering, 11. pp. 275-287.

Sridhar, Jayaprakash and Balaji, Shanmugam and Jegatheeswaran, Dhanapal and Awoyera, P. O. (2023) Prediction of the Mechanical Properties of Fibre-Reinforced Quarry Dust Concrete Using Response Surface and Artificial Neural Network Techniques. Advances in Civil Engineering, 7.

Sulymon, Nurain and Ofuyatan, Olatokunbo M. and Olowofoyeku, O. A. and Olawale, Simon and Busari, A. A. and Bamigboye, Gideon and Jolayemi, Joshua (2017) ENGINEERING PROPERTIES OF CONCRETE MADE FROM GRAVELS OBTAINED IN SOUTH-WESTERN NIGERIA. Cogent Engineering.

Tenebe, I.T. and Emenike, PraiseGod C and Ogbiye, S. A. and Omole, D. O. and Ngene, Ben U. and Omeje, Maxwell and Olatunji, O. O. (2018) A laboratory assessment of the effect of varying roughness on dissolved oxygen using error correction method. CIVIL & ENVIRONMENTAL ENGINEERING.

Tenebe, I.T. and Ogbiye, Adebanji Samuel and Omole, D. O. and Emenike, PraiseGod C (2017) Modelling and Sensitivity analysis of Varying roughness effect on dispersion coefficient: a laboratory study. Desalination and Water Treatment. pp. 209-215.

Thakur, Surendra and Adetiba, E. and Olugbara, O. O. and Millham, Richard (2015) Experimentation Using Short-Term Spectral Features for Secure Mobile Internet Voting Authentication. Mathematical Problems in Engineering. pp. 1-21.

Tunji-Olayeni, P .F and Afolabi, A.O. and Adewale , B. A. and Fagbenle, Olabosipo I. (2018) Survey data set on work-life conflict of women in the construction industry. Data in Brief, 19. pp. 921-924.

Tunji-Olayeni, P .F and Afolabi, A.O. and Ojelabi, Rapheal A. and Ayim, Beatrice A (2017) IMPACT OF LOGISTICS FACTORS ON MATERIAL PROCUREMENT FOR CONSTRUCTION PROJECTS. International Journal of Civil Engineering and Technology (IJCIET, 8 (12). pp. 1142-1148. ISSN 0976-6316

Tunji-Olayeni, P .F and Afolabi, A.O. and Okpalamoka, Obiora I. (2018) Survey dataset on occupational hazards on construction sites. Data in Brief, 18. pp. 1365-1371.

Tunji-Olayeni, P .F and Afolabi, A.O. and Omuh, I. O. and Ojelabi, Rapheal A. and Alaka, Rotimi (2018) HUMAN AND PHYSICAL CAPITAL OF CRAFTSMEN IN THE CONSTRUCTION INDUSTRY. International Journal of Civil Engineering and Technology, 9 (6). pp. 1274-1279. ISSN 0976-6316

Tunji-Olayeni, P .F and Emetere, Moses and Afolabi, A.O. (2017) MULTILAYER PERCEPTRON NETWORK MODEL FOR CONSTRUCTION MATERIAL PROCUREMENT IN FAST DEVELOPING CITIES. International Journal of Civil Engineering and Technology (IJCIET), 8 (5). pp. 1468-1475. ISSN 0976-6316

Tunji-Olayeni, P .F and KAJIMO-SHAKANTU, K and Ayodele, Timothy Oluwafemi (2023) Factors influencing the intention to adopt green construction: an application of the theory of planned behaviour. Smart and Sustainable Built Environment. ISSN 2046-6099

Tunji-Olayeni, P .F and KAJIMO-SHAKANTU, K and Ayodele, Timothy Oluwafemi and Babalola, Olubola (2023) Promoting construction for sustainability transformation: the perspective of institutional theory. International Journal of Building Pathology and Adaptation. ISSN 2398-4708

Tunji-Olayeni, P .F and Mosaku, T. O. and Fagbenle, Olabosipo I. and Amusan, L. M. (2016) PROJECT MANAGEMENT COMPETENCIES OF INDIGENOUS CONTRACTORS IN NIGERIA. African Journal of Built Environment Research, 1 (1). pp. 49-58.

Tunji-Olayeni, P .F and Mosaku, T. O. and Fagbenle, Olabosipo I. and Omuh, I. O. (2017) COMPETITIVE STRATEGIES OF INDIGENOUS CONSTRUCTION FIRMS. International Journal of Civil Engineering and Technology, 8 (10). pp. 350-362. ISSN 0976-6316

Tunji-Olayeni, P .F and Ogunde, Ayodeji and Joshua, Opeyemi and Oni, Aderonke A (2017) WORK-LIFE BALANCE OF WOMEN IN MALE DOMINATED FIELDS. International Journal of Mechanical Engineering and Technology (IJMET), 8 (12). pp. 1197-1205. ISSN 0976-6359

Tunji-Olayeni, P .F and Ojelabi, Rapheal A. and Omuh, I. O. and Afolabi, A.O. (2018) FACTORS AFFECTING PERSISTENCE OF FRESHMEN: A CASE OF BUILDING TECHNOLOGY PROGRAMME. International Journal of Civil Engineering and Technology (IJCIET), 9 (6). 1267-1273. ISSN 0976-6316

Tunji-Olayeni, P .F and Omuh, I. O. and Ojelabi, Rapheal A. and Afolabi, A.O. (2018) SOCIAL AND FINANCIAL CAPITAL OF CRAFTSMEN IN THE CONSTRUCTION INDUSTRY. International Journal of Civil Engineering and Technology (IJCIET), 9 (6). pp. 1107-11113. ISSN 0976-6316

Tunji-Olayeni, P .F and Owolabi, J. D and Amusan, L. M. and Nduka, David (2018) JOB SATISFACTION OF FEMALE CONSTRUCTION PROFESSIONALS IN MALE DOMINATED FIELDS. International Journal of Mechanical Engineering and Technology (IJMET), 9 (1). pp. 732-738. ISSN 0976-6359

Uchegbulam, O. and Ameloko, A. and Omo-Irabor, O. O. (2021) Effect of Cloud Cover on Land Use Land Cover dynamics using Remotely Sensed Data of Western Niger Delta, Nigeria. J. Appl. Sci. Environ. Manage, 25 (5). pp. 799-804. ISSN 1119-8362, e 1119-8362

Udo, Mfon .O and Esezobor, D. E. and Apeh, F. I. and Afolalu, Sunday A. (2018) Factors Affecting Ballability of Mixture Iron Ore Concentrates and Iron Oxide Bearing Wastes in Metallurgical Processing. Journal of Ecological Engineering, 19 (3). pp. 235-242.

Udonne, Joseph Denis and Efeovbokhan, Vincent Enon and Ayoola, A. A. and Babatunde, Damilola Elizabeth and Ifeoluwa, Ajalo and Ajalo, I. J. (2016) Recycling Used Lubricating Oil Using Untreated, Activated and Calcined Clay Methods. Journal of Engineering and Applied Sciences, 11 (6). pp. 1396-1401. ISSN 1816-949X

Udonne, Joseph Denis and Folami, N.A and Patinvoh, R.J. (2016) TREATMENT OF INDUSTRIAL WASTE EFFLUENT USING TREATED BAGASSE. International Journal of Scientific & Engineering Research,, 7 (3). pp. 389-397. ISSN 2229-5518

Udoye, NE and Inegbenebor, A.O. and Fayomi, O. S. I and Dirisu, J. O. (2022) The influence of aluminum metal matrix composite reinforcement - A mini review. AIP Conference Proceedings.

Udoye, Nduka Ekene and Fayomi, O. S. I and Inegbenebor, A.O. (2020) Fractography and Tensile Properties of AA6061 Aluminium Alloy/ Rice Husk Ash Silicon Nanocomposite. International Journal of Chemical Engineering.

Udoye, Nduka Ekene and Fayomi, O. S. I and Inegbenebor, A.O. (2019) REVIEW ON PERFORMANCE OF EXISTING COOLING TOWER FAN BLADE IN THE PRODUCTION INDUSTRY. International Journal of Mechanical Engineering and Technology, 10 (1). pp. 1833-1839. ISSN 0976-6359

Udoye, Nduka Ekene and Fayomi, O. S. I and Inegbenebor, A.O. and Okolie, T. A. Sociis and Dirisu, J. O. and Jen, TC (2022) Corrosion impact of AA6061/clay composite for industrial application. AIP Conference Proceedings.

Udoye, Nduka Ekene and Inegbenebor, A.O. and Fayomi, O. S. I (2020) Corrosion Performance and Wear Behaviour of AA6061 Reinforced Hybrid: Nano-Rice Husk Ash/Clay Particulate for Cooling Tower Fan Blade in 0.75 M H2SO4. Journal of Bio- and Tribo-Corrosion, 62.

Udoye, Nduka Ekene and Inegbenebor, A.O. and Fayomi, O. S. I (2019) THE STUDY ON IMPROVEMENT OF ALUMINIUM ALLOY FOR ENGINEERING APPLICATION: A REVIEW. International Journal of Mechanical Engineering and Technology, 10 (3). pp. 380-385. ISSN 0976-6359

Udoye, Nduka Ekene and UCHE-Abba, S. O. and Inegbenebor, A.O. and Joseph, O. O (2023) The Behavioral Corrosion Characterization of Aluminium AA6061/Chitosan Composites. Advances in Machinery, Materials Science and Engineering Application IX. pp. 191-124.

Udume, Mercy and Imhonopi,, David and Jegede, A. E. and Ozoya, M. I. and Isibor, Areghan Akhanolu and Olawale, Olonade Y. (2021) REWARD SYSTEM: A STRATEGY FOR ACADEMICS' JOB SATISFACTION AND RETENTION. Academy of Strategic Management Journal, 20 (5). ISSN 1939-6104-17-3-222

Ukpebor, Christopher O. and Osayande, Odaro (2016) COMPUTER AND INFORMATION LITERACY AMONG SECONDARY SCHOOL STUDENTS IN EDO AND DELTA STATES OF NIGERIA. International Journal of Publishing and Reading, 6. pp. 429-441.

Usikalu, M.R. and Shittu, Anuoluwapo H. and Obafemi , Leke N. (2018) CONSTRUCTION OF AN INTELLIGENT AND EFFICIENT LIGHT CONTROL SYSTEM. International Journal of Mechanical and Production Engineering Research and Development, 8 (4). pp. 1025-1034. ISSN 2249-6890; ISSN(E): 2249-8001

Uzairue, Stanley Idiake and Ighalo, Joshua and Matthews, V. O. and Nwukor, Frances and Popoola, A. P. I. (2018) IoT-Enabled Alcohol Detection System for Road Transportation Safety in Smart City. Springer Nature. pp. 695-704.

Uzairue, Stanley Idiake and Matthews, V. O. and Ochonogor, Charles and Amaize, Peter and Anyasi, F. I. (2018) Experimental Analysis of Cable Distance Effect on Signal Attenuation in Single and Multimode Fiber Optics. International Journal of Electrical and Computer Engineering (IJECE), 8 (3). pp. 1577-1582. ISSN 2088-8708

Uzairue, Stanley Idiake and Nkordeh, Nsikan and Ochonogor, Charles and Amaize, Peter and Alashiri, Olaitan and Ighalo, Joshua (2018) A Review: The Past, Present and Future of Radio Frequency Spectrum in Nigeria, Canada, United Kingdom, Ghana. International Research Journal of Engineering and Technology (IRJET), 6 (3). pp. 1034-1039. ISSN 2395-0056

Uzairue, Stanley Idiake and Nwukor, Frances and Alashiri, Olaitan and Amiaze, Peter (2017) A Review: Evolution of 5G, Security and Multiple Access schemes in Mobile Communication. International Research Journal of Engineering and Technology (IRJET), 4 (12). pp. 1277-1279. ISSN 2395-0056

Uzoije, Atulegwu Patrick and Uzoigwe, Luke O. and Kamalu, Ikenna C. (2012) Activated Orange Meso-Carp Carbon (AOMC); an Acceptable Remediation Techniques for Crude Oil Pollution Effect. Research Journal of Applied Sciences, Engineering and Technology , 4 (1). pp. 51-58.

WAGBARA, OBINDAH (2007) How would the gas exporting countries forum influence gas trade? Energy Policy, 35. pp. 1224-1237.

WAGBARA, OBINDAH (2008) To What Extent is a Liquid LNG Hub in the Middle East Feasible? I.E.L.R, 3.

WAGBARA, OBINDAH (2008) Why Does Trinidad and Tobago Need a Different Fiscal Regime for Gas? I.E.L.R., 3.

Wang, Fawu and Dai, Zili and Okeke, Austin Chukwueloka Udechukwu and Mitani, Yasuhiro and Yang, Hufeng (2018) Experimental study to identify premonitory factors of landslide dam failures. Engineering Geology. pp. 123-134.

Wang, Fawu and Okeke, Austin Chukwueloka-Udechukwu and Kogure, Tetsuya and Sakai, Tetsuya and Hayashi, Hisao (2018) Assessing the internal structure of landslide dams subject to possible piping erosion by means of microtremor chain array and self-potential surveys. Engineering Geology. pp. 11-26.

Wara, S.T. (1997) Adaptive Technology And Power Systems Management "The Evolution Of Local Technology". Journal of Electrical and Electronic Engineering,, 2 (2). pp. 41-56. ISSN 1118-5058

Wara, S.T. (2011) Demand Side Management(DSM) An Energy Management/Energy Efficiency/Energy Conservation/Energy Security Technique. The Guardian News Paper.

Wara, S.T. (2011) Demand Side Management(DSM) An Energy Management/Energy Efficiency/Energy Conservation/Energy Security Technique. The Guardian Newspaper. pp. 88-89.

Wara, S.T. (2012) Promoting Nigeria's Energy Efficiency Dsm Programme Through Energy Conservation. The Guardian news Paper. p. 43.

Wara, S.T. and Abayomi-AIIi, A. and Umo, N.D., and Oghogho, I. and Odikayor, C.D. (2009) An Impact Assessment of the Nigerian Power Sector Reforms. Advanced Materials Research Vols., 62 (64). pp. 147-152.

Wara, S.T. and Abe, S. E. (2013) Mitigating Climate Change by the Development and Deployment of Solar Water Heating Systems. Journal of Energy.

Wara, S.T. and Ilaboya, I.R. and Hymore, F. K. (2008) Poverty Alleviation And National Development: Prospects And Challenges. Journal ofEI!I!ineering Ter.hnology and Economic Development (Multidisciplinary Journal/. pp. 59-71.

Wara, S.T. and KUALE, P.A (2000) Investigation Of The Properties Of Local Woods With A View To Using Them For Electrical Insulation Especially In Power Distribution Transformer. Journal of Electrical and Electronic Engineering,, 5 (1). pp. 1-10. ISSN 1118-5058

Wara, S.T. and Okoro, Ogbonnaya I (2012) Promoting Nigeria's Energy Efficiency Dsm Programme Through Renewables/Cogeneration- Wind Energy Prospects. Guardian News Papers. p. 56.

Zhu, Chen and Guan, Shengnan and Li, Wenzhi and Ogunbiyi, Ajibola T and Chen, Kun and Zhang, Qi (2021) Degradation of Formaldehyde over MnO2/CeO2 Hollow Spheres: Elucidating the Influence of Carbon Sphere Self-Sacrificing Templates. ACS Omega, 6. pp. 35404-35415. ISSN ACS Publication

lbikunle, F and Agbetuyi, Ayoade F. and Ukpere, G (2013) Face Recognition Using Line Edge Mapping Approach. American Journal of Electrical and Electronic Engineering,, 1 (3). pp. 52-59.

lnegbenebor, A. O. EFFECTS OF QUENCHING AND NORMALIZING ON THE TENSILE TEST PARAMETERS OF MECHANICAL PROPERTIES OF NIGERIAN STEEL NST 60MN. NSE TECHNICAL TRANSACTION, 34 (4). pp. 76-87.

Book Section

Abioye, Abiodun A. and Fayomi, O. S. I and Popoola, A. P. I. and Abioye, Abiodun A. (2017) Equal Channel Angular Extrusion Characteristics on Mechanical Behavior of Aluminum Alloy. In: Aluminium Alloys - Recent Trends in Processing, Characterization, Mechanical Behavior and Applications. INTECH, pp. 263-277.

Abioye, Abiodun A. and Fayomi, O. S. I and Popoola, A. P. I. and Abioye, Oluwabunmi P. (2017) Equal Channel Angular Extrusion Characteristics on Mechanical Behavior of Aluminum Alloy. In: Aluminium Alloys – Recent Trends in Processing, CharaAluminium Alloys – Recent Trends in Processing, Characterization, Mechanical behavior and Applicationscterization, Mechanical behavior and Applications. INTECH.

Adeniyi, Amos and Agboola, Oluranti and Sadiku, Rotimi Emmanuel and Durowoju, M.O. and Olubambi, P.A. and Reddy, A. Babul and Ibrahim, Idowu David and Kupolati, W.K. (2016) NANOSTRUCTURED POLYMER BLENDS. In: THERMOPLASTICTHERMOSET NANOSTRUCTURED POLYMER BLENDS. Elsevier Ltd.

Adetiba, E. and Badejo, J. A. and Thakur, Surendra and Matthews, V. O. and Adebiyi, Marion O. and Adebiyi, E. F. (2018) Experimental Investigation of Frequency Chaos Game Representation for in Silico and Accurate Classification of Viral Pathogens from Genomic Sequences. In: Bioinformatics and Biomedical Engineering. Springer, Cham. ISBN 978-3-319-56147-9

Afolabi, A.O. and Fagbenle, Olabosipo I. and Mosaku, T. O. (2017) Characteristics of a Web-Based Integrated Material Planning and Control System for Construction Project Delivery. In: Recent Advances in Information Systems and Technologies Volume 2. Springer International Publishing, pp. 20-30. ISBN 978-3-319-56537-8

Afolabi, A.O. and Fagbenle, Olabosipo I. and Mosaku, T. O. (2017) IT Management of Building Materials’ Planning and Control Processes Using Web-Based Technologies. In: Recent Advances in Information Systems and Technologies. Springer International Publishing, pp. 12-19.

Agboola, Oluranti and Ayeni, .A. O. and Fayomi, O. S. I and Oladokun, Olagoke and Ayoola, A. A. and Babatunde, Damilola Elizabeth and Efeovbokhan, Vincent Enon and Odunlami, O. A. and Adeniyi, A. and Sadiku, Rotimi Emmanuel (2022) A Short Overview on the Role of Nanotechnology in Different Sectors of Energy System. In: Advanced Manufacturing in Biological, Petroleum, and Nanotechnology Processing. Springer, pp. 99-115. ISBN 978-3-030-95819-0

Agboola, Oluranti and Sadiku, Rotimi Emmanuel and Mokrani, Touhami (2016) CARBON CONTAINING NANOSTRUCTURED POLYMER BLENDS. In: Design and Applications of Nanostructured Polymer Blends and Nanocomposite Systems. Elsevier Inc.

Agboola, Oluranti and Sadiku, Rotimi Emmanuel and Mokrani, Touhami (2016) NANOMEMBRANE MATERIALS BASED ON POLYMER BLENDS. In: Design and Applications of Nanostructured Polymer Blends and Nanocomposite Systems. Elsevier Ltd.

Ajayi, O. O. and Omowa, Olasubomi F. and Abioye, Oluwabunmi P. and Omotosho, Olugbenga Adeshola and Akinlabi, Esther T. and Akinlabi, Stephen A. and Abioye, Abiodun A. and Owoeye, T. F. and Afolalu, Sunday A. (2018) Finite Element Modelling of Electrokinetic Deposition of Zinc on Mild Steel with ZnO-Citrus sinensis as Nano-Additive. In: CFD Modeling and Simulation in Materials Processing 2018. The Minerals, Metals & Materials Society Spinger, pp. 199-211. ISBN 978-3-319-72059-3

Akinwumi, I. I. and Booth, C. A. and Ojuri , O. O. and Ogbiye, S. A. and COKER, A.O (2018) Containment of Pollution from Urban Waste Disposal Sites. In: Urban Pollution: Science and Management. Wiley-Blackwell , United Kingdom, pp. 223-234. ISBN 9781119260486

Alagbe, Edith Egbimhanlu. and Amoo, Temitope Emmanuel and Oboh, I. O. and Ayeni, .A. O. and Ayoola, A. A. and Agboola, Oluranti (2022) Atherosclerosis and Scientific Interventions: A Review. In: Bioenergy and Biochemical Processing Technologies. Online Green Energy and Technology, pp. 191-200.

Anyaeji, C.A and Ibrahim, S. B and Wara, S.T. The Transdesign, Winding And Testing Of A Disused 4-Pole Squirrel Cage Single-Phase Induction Motor For 4-Pole, Three-Phase Operation. In: Trends in Manufacturing Technology And Manaement in Nigeria. AMA Resources Nigeria Limited, pp. 62-68. ISBN 978-316224-5-4

Atayero, A. A. and Oshin, Oluwadamilola and Alatishe, A. S. (2014) Self Organizing Networks for 3GPP LTE. In: Computational Science and Its Applications. SpringerLink, pp. 242-254. ISBN 978-3-319-09156-3

Awodele, Oludele and Okesola, Olatunji J. and Okokpujie, Kennedy O. and Damilola , Fowora and Kuyoro , Afolashade and Adebiyi , Ariyo (2018) Cryptography and the Improvement of Security in Wireless Sensor Networks. In: " Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2018,. 4-6 July, 2018, London, U.K., pp. 337-340.

Awoyera, P. O. and Kirgiz, Mehmet S. (2022) 10 - Mineralogy and interfacial transition zone features of recycled aggregate concrete. In: The Structural Integrity of Recycled Aggregate Concrete Produced with Fillers and Pozzolans. Woodhead Publishing, pp. 469-477.

Awoyera, P. O. and Kirgiz, Mehmet S. and Adesina, Adeyemi (2022) Engineered uses of nanomaterials for sustainable cementitious composites. In: Sustainable Nanotechnology for Environmental Remediation. Elsevier Inc.

Babatunde, Damilola Elizabeth and Denwigwe, Iheanacho H. and Babatunde, Olubayo Moses and Agboola, Oluranti and Akinsipe, Gbemisola Deborah (2019) Relevance of Chemically Functionalized Nano-Fillers and Modified Nanocomposite in Energy Systems. In: Polymer Nanocomposites for Advanced Engineering and Military Applications. IGI Global.

Bheel, panelNaraindas and Awoyera, P. O. and Shar, Irfan Ali and Kirgiz, Mehmet S. (2024) Self-compacting concrete blended with fly ash and ground granulated blast furnace slag. In: Advance Upcycling of By-Products in Binder and Binder-Based Materials. Woodhead Publishing Series.

Fayomi, O. S. I and Anawe, Paul Apeye Lucky and Daniyan, A. A. (2018) The Impact of Drugs as Corrosion Inhibitors on Aluminum Alloy in Coastal-Acidified Medium. In: Corrosion Inhibitors, Principles and Recent Applications. INTECH.

Fayomi, O. S. I and Popoola, A. P. I. and Loto, C. A. (2014) Morphological and Electrochemical Interactions of Admixed Zn-SnO2 Composites Electro-Deposited on Mild Stee. In: Processing and Properties of Advanced Ceramics and Composites VI: Ceramic Transactions. 1999-2017 John Wiley & Sons.

Fayomi, O. S. I and Popoola, A. P. I. and Loto, C. A. (2016) The Study of the Microstructure and Interfacial Reaction of Binary Composite Coating. In: Crystallizing Ideas – The Role of Chemistry. Springer International Publishing Switzerland. ISBN 978-3-319-31758-8

Fayomi, O. S. I and Popoola, A. P. I. and Udoye, Nduka Ekene (2017) Effect of Alloying Element on the Integrity and Functionality of Aluminium-Based Alloy. In: Aluminium Alloys – Recent Trends in Processing, Characterization, Mechanical behavior and Applications. INTECH.

Gobinath, R and Ganapathy, G. P. and Akinwumi, I. I. and Prasath, E. and Raja, G. and Prakash, T. and Shyamala, G (2020) Soil Erosion Protection on Hilly Regions Using Plant Roots: An Experimental Insight. In: Gully Erosion Studies from India and Surrounding Regions. Springer.

Joseph, Ejemen Rachael and Onuh, C.Y and Orodu, O. D. and Olabode, O.A. and Nchila, Yuven Thelma and Dinga, Christian N. (2022) Nigerian Marginal Oilfield Development Program: PIA and Current Issues. In: Bioenergy and Biochemical Processing Technologies. Green Energy and Technology, pp. 83-95. ISBN 978-3-030-96721-5

KUALE, P.A and Wara, S.T. Career Guidance. In: Electrical Engineering Practice Vol. 1. Mufti International Services, pp. 147-158. ISBN 978-2692-2-7

Loto, R. T. Pitting Corrosion Resistance and Inhibition of Lean Austenitic Stainless Steel Alloys. In: Austenitic Stainless Steels - New Aspects. INTECH, pp. 147-170.

Loto, R. T. Pitting Corrosion Resistance and Inhibition of Lean Austenitic Stainless Steel Alloys. In: Austenitic Stainless Steels. InTechOpen.

Mamudu, Angela Onose and Elehinafe, F. Boluwaji and Ishola, Felix and Okoro, Emeka Emmanuel and Ogunduyile, Gideon (2022) Maximizing Olefins Production from Fluid Catalytic Cracking (FCC) Unit Using Zsm- 05 Catalyst for the Nigerian Petrochemical Industry. In: The United Nations and Sustainable Development Goals. NamePalgrave Macmillan, Cham. ISBN ISBN978-3-030-95970-8  Online ISBN978-3-030-95971-5

Mansouri, Iman and Tezcan, Jale and Awoyera, P. O. (2022) A Novel Formulation for Estimating Compressive Strength of High Performance Concrete Using Gene Expression Programming. In: Leveraging Artificial Intelligence in Enginering <anagement and safty of Infrastructure. CRC Press.

Ngene, Ben U. and Agunwamba, J. C and Tenebe, I.T. and Bamigboye, Gideon (2018) Geography of Udi Cuesta Contribution to Hydro-Meteorological Pattern of the South Eastern Nigeria. In: Engineering and Mathematical Topics in Rainfall. InTech, pp. 93-114.

Noma-Osaghae, Etinosa and John, S. N. and Aragha, A. I. and Okokpujie, Kennedy O. (2022) Optimizing Stochastic Small Base Station Deployment with Particle Swarm Technique. In: Advances in Information and Communication. Springer Nature Switzerland.

Odikayor, C.D. and Oghogho, I. and Wara, S.T. and Adebayo, Abayomi-Alli (2012) Dual-Sim Phones· A Disruptive Technology? In: Disruptive Technologies, lnnovation and Global Redesign:Emerging Implications. IGI Global. ISBN 798-1-4666-0134-5

Ofuyatan, Olatokunbo M. and Ighalo, Joshua and Olukanni, D. O. and Adeniyi, Adewale and Oluwafemi, John (2022) Implications of COVID-19 Pandemic on Energy and Environment Research in Nigeria. In: The United Nations and Sustainable Development Goals. Palgrave Macmillan, Cham.

Ofuyatan, Olatokunbo M. and Ighalo, Joshua and Olukanni, D. O. and Adeniyi, Adewale George and Oluwafemi, John (2022) Implications of COVID-19 pandemic on energy and environment research in Nigeria. In: The United Nations and Sustainable Development Goals. Springer Nature.

Oghogho, I. and Odikayor, C.D. and Adebayo, Abayomi-Alli and Wara, S.T. (2012) VOIP vs GSM Technology: The Way of the Future for Communication. In: Disruptive Technologies, l·nnovation and Global Redesign: Emerging Implications. IGI Global, pp. 281-298. ISBN 978-1-466603134-5

Ohunakin, O.S. and Adaramola, Muyiwa S and Oyewola, Olanrewaju M. and Fagbenle, R. O. and Abam, Fidelis I. (2016) A Typical Meteorological Year Generation Based on NASA Satellite Imagery (GEOS-I) for Sokoto, Nigeria. In: Meteorology and Energy Security. Meteorology and Energy Security, A Typical Meteorological Year Gmerotiou Based 011 N!S~ Satellite Imagery (GEOS·/) for Sokoto, Nigerla., pp. 25-40. ISBN 978-1-77188-386-3 eBook ISBN: 978-1-77188-387-0

Ojewumi, M. E. and Olanipekun, O. O. and Obanla, O. R. and Abinusawa, A. P. and Kolawole, Oluwatobi (2022) Biodegradation of Waste Papers: A Sustainable Technology for a Clean Environment. In: The United Nations and Sustainable Development Goals. Springer Nature, pp. 249-259. ISBN ISBN978-3-030-95970-8  Online ISBN978-3-030-95971-5

Okeniyi, Joshua Olusegun and Abioye, Abiodun Oyekola and Adikpewun, Zechariah Chiwonsoko and Otesanya, Adeola Abigail and Eleshin, Michael Damilola and Gabriel, Olanrewaju Oyewale and Adeoye, Oluyori (2017) Effect of C5H11NO2S on Reinforcing-Steel Corrosion in Concrete Immersed in Industrial/Microbial Simulating-Environment. In: Proceedings of the 3rd Pan American Materials Congress. The Minerals, Metals & Materials Series (1). Springer International Publishing, Springer, Cham, pp. 191-203. ISBN 978-3-319-52131-2

Okeniyi, Joshua Olusegun and John, Gbadebo Samuel and Owoeye, Taiwo Felicia and Okeniyi, Elizabeth Toyin and Akinlabu, Deborah Kehinde and Taiwo, Olugbenga Samson and Awotoye, Olufisayo Adebola and Ige, Ojo Joseph and Obafemi, Yemisi Dorcas (2017) Effects of Dialium guineense Based Zinc Nanoparticle Material on the Inhibition of Microbes Inducing Microbiologically Influenced Corrosion. In: Proceedings of the 3rd Pan American Materials Congress. The Minerals, Metals & Materials Series (1). Springer International Publishing, Springer, Cham, pp. 21-31. ISBN 978-3-319-52131-2

Okeniyi, Joshua Olusegun and Loto, C. A. and Idowu Popoola, Abimbola Patricia (2016) Total-Corrosion Effects of Anthocleista Djalonensis and Na2Cr2O7 on Steel-Rebar in H2So4: Sustainable Corrosion-Protection Prospects in Microbial/Industrial Environment. In: Rewas 2016: Towards Materials Resource Sustainability. John Wiley & Sons, Inc., Hoboken, New Jersey, USA. , pp. 187-192. ISBN 9781119275039

Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2015) Modelling Rhizophora Mangle L Bark-Extract Effects on Concrete Steel-Rebar in 0.5 M H2SO4: Implications on Concentration for Effective Corrosion-Inhibition. In: TMS2015 Supplemental Proceedings. John Wiley & Sons, Inc., Hoboken, NJ, USA, pp. 751-758. ISBN 9781119093466

Okeniyi, Joshua Olusegun and Ogbiye, Adebanji Samuel and Ogunlana, Olubanke Olujoke and Okeniyi, Elizabeth Toyin and Ogunlana, Oluseyi Ebenezer (2015) Investigating Solanum Aethiopicum Leaf-Extract and Sodium-Dichromate Effects on Steel-Rebar Corrosion In saline/Marine Simulating-Environment: Implications on Sustainable Alternative for Environmentally-Hazardous Inhibitor. In: Engineering Solutions for Sustainability. Materials and Resources (2). John Wiley & Sons, Inc., Hoboken, New Jersey, USA, pp. 167-175. ISBN 9781119179856

Okeniyi, Joshua Olusegun and Ogunlana, Olubanke Olujoke and Ogunlana, Oluseyi Ebenezer and Owoeye, Taiwo Felicia and Okeniyi, Elizabeth Toyin (2015) Biochemical Characterisation of the Leaf of Morinda Lucida: Prospects for Environmentally-Friendly Steel-Rebar Corrosion-Protection in Aggressive Medium. In: TMS2015 Supplemental Proceedings. John Wiley & Sons, Inc.,, Hoboken, New Jersey, USA, pp. 635-644. ISBN 9781119082415

Okeniyi, Joshua Olusegun and Okeniyi, Elizabeth Toyin and Ogunlana, Olubanke Olujoke and Owoeye, Taiwo Felicia and Ogunlana, Oluseyi Ebenezer (2017) Investigating Biochemical Constituents of Cymbopogon citratus Leaf: Prospects on Total Corrosion of Concrete Steel-Reinforcement in Acidic-Sulphate Medium. In: TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series (1). Springer International Publishing, Springer, Cham, pp. 341-351. ISBN 978-3-319-51492-5

Okeniyi, Joshua Olusegun and Omotosho, Olugbenga Adeshola and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2017) Anticorrosion and Adsorption Mechanism of Rhizophora mangle L. Leaf-Extract on Steel-Reinforcement in 3.5% NaCl-Immersed Concrete. In: Proceedings of the 3rd Pan American Materials Congress. The Minerals, Metals & Materials Series (1). Springer International Publishing, Springer, Cham, pp. 167-178. ISBN 978-3-319-52131-2

Okeniyi, Joshua Olusegun and Omotosho, Olugbenga Adeshola and Okeniyi, Elizabeth Toyin and Ogbiye, Adebanji Samuel (2016) Anticorrosion Performance of Solanum Aethiopicum on Steel-Reinforcement in Concrete Immersed in Industrial/Microbial Simulating-Environment. In: TMS 2016: 145thAnnual Meeting & Exhibition: Supplemental Proceedings. John Wiley & Sons, Inc., Hoboken, NJ, USA, pp. 409-416.

Okesola, Olatunji J. and Okokpujie, Kennedy O. and Oyom, Paul R. and Olamide , Kalesanwo and Oludele , Awodele and Afolashade , Kuyoro (2018) Structuring Challenges in Requirement Engineering Techniques. In: "Structuring Challenges in Requirement Engineering Techniques," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2018,. 4-6 July, 2018, London, U.K., pp. 197-200.

Okokpujie, Imhade P. and Akinlabi, Esther T. and Udoye, Nduka Ekene and Okokpujie, Kennedy O. (2021) ANOMALY-BASED INTRUSION DETECTION FOR A VEHICLE CAN BUS: A CASE FOR HYUNDAI AVANTE CN7. In: Trends in Mechanical and Biomedical Design, Lecture Notes in Mechanical Engineering,. Springer Nature Singapore.

Okokpujie, Kennedy O. and John, S. N. and Ndujiuba, Charles Uzoanya and Noma-Osaghae, Etinosa (2020) Development of an adaptive Trait-Aging Invariant recognition System using Convolutional Neural Network. In: Information Science and Application. Springer.

Okoro, Emeka Emmanuel and Sanni, Samuel Eshorame (2022) Intelligent and knowledge-based waste management: smart decision-support system. In: Current Trends and Advances in Computer-Aided Intelligent Environmental Data Engineering Intelligent Data-Centric Systems. Academic Press, pp. 353-380.

Oloyede, S. A. and Ayedun, C. A. (2017) Assessing Some Associated Risk Factors in Corporate Real Estate Development. In: Emerging Issues in Urban Land use and Development in Nigeria. University ofAbuja Press.

Olukanni, D. O. and Ijeh, Chukwume G. (2021) Application of Treated Mixed Fruit Wastes in Soil Stabilization. In: Circular Economy in the Construction Industry. CRC Press. ISBN 9781003217619

Olukanni, D. O. and Justin, L.D and FAGBENLE, EMMANUEL OLABAYO (2022) Environmental Impact Assessment (EIA) in Actualizing SDGs: Lessons from Community Development in Ogun State, Nigeria. In: The United Nations and Sustainable Development Goals Cham. Palgrave Macmillan.

Olukanni, D. O. and Megbope, Gbemisola I and Ogundare, J. O. (2022) Assessment of Biogas Generation Potential of Mixed Fruits Solid Waste. In: Biomethane through Resource Circularity. CRC Press. ISBN 9781003204435

Olukanni, D. O. and Ojukwu, Chukwuebuka N. (2021) Biogas Recovery from Poultry and Piggery Waste. In: Biomethane through Resource Circularity. CRC Press.

Omotosho, Olugbenga Adeshola and Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, Abimbola Patricia Idowu and Ajibola, Omokolade Babatunde and Ogbiye, Adebanji Samuel (2017) Cassia fistula Leaf-Extract Effect on Corrosion-Inhibition of Stainless-Steel in 0.5 M HCl. In: Proceedings of the 3rd Pan American Materials Congress. The Minerals, Metals & Materials Series (1). Springer International Publishing, Springer, Cham, pp. 179-189. ISBN 978-3-319-52131-2

Omotosho, Olugbenga Adeshola and Okeniyi, Joshua Olusegun and Obi, Emmanuel Izuchukwu and Sonoiki, Oluwatobi Oluwasegun and Oladipupo, Segun Isaac and Oshin, Timi Moses (2016) Inhibition of Stainless Steel Corrosion IN 0.5 M H2SO4 IN The Presence OF C6H5NH2. In: TMS 2016: 145th Annual Meeting & Exhibition: Supplemental Proceedings. John Wiley & Sons, Hoboken, NJ, USA, pp. 465-472. ISBN 9781119274896

Oni, O.O. and Idachaba, F.E. and Oshin, Oluwadamilola and Nkordeh, Nsikan (2015) A Comparative Review of Improvements in LTE. In: IAENG TRANSACTIONS ON ENGINEERING SCIENCES. World Scientific, pp. 336-347. ISBN 9789813142718

Oyebanji, J.A. and Oyedepo, Sunday Olayinka and Kilanko, O. O and Sunday, Dunmade Israel (2022) Waste-to-Energy Potential of Biofuels Production from Sawdust as a Pathway to Sustainable Energy Development. In: Bioresource Technology: Concept, Tools and Experiences. Wiley Online Library.

Oyedepo, Sunday Olayinka and Anifowose, Emmanuel G. and Obembe, Elizabeth O. and Dirisu, J. O. and Khanmohamadi, Shoaib and Kilanko, O. O and Babalola, P.O. and Ohunakin, O.S. and Leramo, R.O. and Olawole, C. Olukunle (2021) Assessment of Economic and Environmental Impacts of Energy Conservation Strategies in a University Campus. In: Green Energy: Solar Energy, Photovoltaics, and Smart Cities. Scrivener Publishing LLC.

Popoola, A. P. I. and Malatji, N. and Fayomi, O. S. I Fabrication and Properties of Zinc Composite Coatings for Mitigation of Corrosion in Coastal and Marine Zone. In: Applied Studies of Coastal and Marine Environments. InTechOpen.

Popoola, S.I. and Popoola, O.A. and Oluwaranti, A.I. and Atayero, A. A. and Badejo, J. A. and Misra, S. (2018) A cloud-based intelligent toll collection system for smart cities. In: Smart and Innovative Trends in Next Generation Computing Technologies. Springer Verlag, pp. 653-663.

Sadiku, Rotimi Emmanuel and Fasiku, V. O. and Owonubi, S. J. and Mukwevho, E.E. and Aderibigbe, B. A. and Lemmer, Y. and Abbavaram, B. R and Manjula, B. and Nkuna, C. and Dludlu, M. K and Adeyeye, O. A and Selatile, K and Makgatho, G and Ndamase, A. S and Mabalane, P. N and Agboola, O.O. and Sanni, Samuel Eshorame and Varaprasad, K. and Tippabattini, J. and Kupolati, W.K. and Adeboje, A. O. and Jamiru, Tamba (2018) Polyhydroxyalkanoates (PHAs) as Scaffolds for Tissue Engineering. In: Polyhydroxyalkanoates: Biosynthesis, Chemical Structures and Applications. Materials Science and Technologies.

Sanni, Samuel Eshorame and Agboola, O.O. and Sadiku, Rotimi Emmanuel and Emetere, Moses (2019) Nature of Graphene, Its Chemical Structure, Composites, Synthesis, Properties, and Applications. In: Handbook of Graphene. WILEY.

Sanni, Samuel Eshorame and Favour, Ifi and Adeyanju, Adebayo (2022) Nanovesicles for the delivery of siRNA. In: Applications of Nanovesicular Drug Delivery. Academic Press, pp. 457-466.

Sanni, Samuel Eshorame and Mshelia, Haruna and Okoro, Emeka Emmanuel and Alaba, Peter Adeniyi and Oni, Babalola Aisosa and Ayoola, Ayodeji (2022) Estimation of critical fluxes, thermal stabilities and failure criteria of cellulose‐based membranes and modelling of salt diffusivity during pervaporative desalination. In: Nanotechnology for Environmental EngineeringAims and scopeSubmit manuscript. Nanotechnology for Environmental Engineering, pp. 857-881.

Sanni, Samuel Eshorame and Okoro, Emeka Emmanuel and Sadiku, Rotimi Emmanuel and Oni, Babalola Aisosa (2022) Advances in data-centric intelligent systems for air quality monitoring, assessment, and control. In: Current Trends and Advances in Computer-Aided Intelligent Environmental Data Engineering Intelligent Data-Centric Systems. Elsevier, pp. 25-58.

Sanni, Samuel Eshorame and Okoro, Emeka Emmanuel and Sadiku, Rotimi Emmanuel and Oni, Babalola Aisosa (2022) Data‐centric intelligent systems for water quality monitoring, assessment, and control. In: Current Trends and Advances in Computer‐Aided Intelligent Environmental Data Engineering. Elsevier, pp. 129-160.

Sanni, Samuel Eshorame and Oni, Babalola Aisosa (2022) Advances in the Use of Ethers and Alcohols as Additives for Improving Biofuel Properties for SI Engines. In: Potential and Challenges of Low Carbon Fuels for Sustainable Transport. Energy, Environment, and Sustainability, pp. 153-182.

Sanni, Samuel Eshorame and Sadiku, Rotimi Emmanuel and Okoro, Emeka Emmanuel (2022) Thermal Stabilities of Bionanocomposites at Elevated Temperatures. In: Polymer Based Bio-nanocomposites. Composites Science and Technology, pp. 51-68. ISBN ISBN978-981-16-8577-4  Online ISBN978-981-16-8578-1

Udoye, Nduka Ekene and Fayomi, O. S. I and Inegbenebor, A.O. (2022) The Essence of Intermetallic Phases in AA6061/Clay Composites. In: Advanced Manufacturing in Biological, Petroleum, and Nanotechnology Processing. Springer Nature Switzerland, pp. 85-97. ISBN ISBN978-3-030-95819-0  Online ISBN978-3-030-95820-6

Wara, S.T. (2009) Installation, Testing And Maintenance' Of Power . Distribution Transformer. In: Electrical Engineering Practice Vol. 1. Multi International Services, pp. 57-77. ISBN 978-2692-24-7

Wara, S.T. and Anyaeji, C.A and KUALE, P.A (1995) Design Construction And Preliminary Testing Of A Distribution Transformer. In: Trends in Manufacturing Technology and Management In Nigeri. AMA Resources Nigeria Limited, pp. 1-10. ISBN 987-316224-5-4

Wara, S.T. and Gura, J.H (2008) Building Services And The Engineering Consultant. In: Electrical Engineering Practice Vol. 1 •. Mufti International Services, pp. 1-18. ISBN 978-2692-24-7

Monograph

Makinde, F. A. (2008) Effective Project Report Writing and Presentation. Manual. Nil, Nil. (Unpublished)

Omoleye, James and Covenant University, Inaugural Lecture (2012) “MONO-METALLIC REFORMING CATALYST LIFE AND MORTALITY: A REPLICA OF HUMAN LIFE AND A PANACEA TO BETTER HEALTH”. Documentation. Covenant University Ota.

Conference or Workshop Item

AJAYI , Samuel Akintomide and Owolabi, Adebayo Oladipo and OSADEBE , C.C. and Busari, A. A. and QUADRI, H.A. (2017) The Design, Fabrication and Testing of Infrared Traffic Counter on Selected Major Dual-Carriageways in Akure - Nigeria. In: 4th International Conference on Transportation in Africa, 11-13 October 2017, Sheraton Hotel, Abuja, Nigeria, West Africa.

ASITE, Ovakporoye and Ukaoha, I. and Okon, E. J. and Adebiyi, A. A. and Ayo, C. K. (2017) SOLVING TERRORISM SECURITY CHALLENGES USING SENSOR NETWORK TECHNOLOGY. In: CUCEN 2017, Covenant University, Ota.

AYOADE, OLUSOLA BAMIDELE (2017) Impact of Information and Communication Technology (ICT) on the Public Service Delivery in Local Government. In: CUCEN 2017, Covenant University, Ota.

Abasilim , U. D. and Gberevbie, D.E. and IFALOYE, O. R (2017) ATTAINING A BETTER PUBLIC SERVICE DELIVERY THROUGH E-GOVERNANCE ADOPTION IN NIGERIA. In: CUCEN 2017, Covenant University, Ota.

Abdulkareem, Ademola and Somefun, Tobilola Emmanuel and Oguntosin, V. and Adeyemi, B. O. (2021) Design and Construction of a Weather-Based Automat6ic sliding Window. In: International Conference on Engineering for Sustainable World, 2021, Online.

Abdulkareem, Ademola and Somefun, Tobilola Emmanuel and Oguntosin, V. and Adeyemi, O.B. and somefun, C.T. (2020) Design and Construction of a Weather-Based Automatic Sliding Window. In: International Journal of Engineering Research and Technology..

Abdulkareem, Ademola and Somefun, Tobilola Emmanuel and Oguntosin, V. and Ogunade, F (2020) Development and construction of automatic three-phase power changeover control circuit with alarm. In: ICSID.

Abdulkareem, Ademola and Somefun, Tobilola Emmanuel and Oguntosin, V. and Ogunade, F (2021) Development and construction of automatic three-phase power changeover control circuit with alarm. In: ICSID 2020, 2021, Online.

Abioye, Abiodun A. and Atanda, P. O. and Abioye, Oluwabunmi P. and Akinlabi, Stephen A. and Akinlabi, Esther T. and Bolu, Christian and Afolalu, Sunday A. and Ajayi, O. O. and Ohijeagbon, I. O. (2018) A Review on Automotive Industries and Foundries in Nigeria. In: IOP Conf. Series: Materials Science and Engineering.

Abraham, V. D. and Orodu, O. D. and Efeovbokhan, Vincent Enon and Okoro, Emeka Emmanuel and Ojo, Temiloluwa and Bolujo, E. O. (2021) Evaluation of Permeability Impairment Due to Surfactant Flooding. In: 4th International Conference on Science and Sustainable Development, 2021, Online.

Abraham, V. D. and Orodu, O. D. and Efeovbokhan, Vincent Enon and Okoro, Emeka Emmanuel and Ojo, Temiloluwa and Keshinro, Lekan (2020) Experimental Studies on the Performance of Bio Based and Industrial Surfactants in Enhanced Oil Recovery. In: Nigeria Annual International Conference and Exhibition, August 11, 2020, Online.

Adeaga, O. A. and Dare, A. A. and Odunfa, K. M. and Adegbenjo, A.O. and Ohunakin, O.S. (2014) Economic Appraisal Of Industrial Solar Drying (Part I). In: International Conference of Mechanical Engineering, Energy Technology and Management IMEETMCon 2014.

Adekitan, Aderibigbe I. and Adetokun, Bukola and Okokpujie, Kennedy O. (2018) A data-based investigation of vehicle maintenance cost components using ANN. In: IOP Conf. Series: Materials Science and Engineering.

Adekitan, Aderibigbe I. and Matthews, V. O. and Olasunkanmi, Olayinka (2018) A microcontroller based gas leakage detection and evacuation system. In: IOP Conf. Series: Materials Science and Engineering.

Adekunle, O. V. (2012) An Overview of Broadband communication over Power Lines. In: EIE’s 2nd International Conference on Computing, Energy, Networking, Robotics and Telecommunications (eieCon2012).

Adekunle, Timothy O. and Bjarnadottir, Sigridur and Oloyede, Samuel (2017) Occupants’ adaptation and design parameters influencing behavioural actions of occupants in naturally ventilated sustainable timber buildings. In: he 12th Conference of Advanced Building Skins, 2-3 October 2017, Bern, Switzerland.

Adelekan, D.S and Ohunakin, O.S. and Odunfa, K. M. and Babarinde, T.O. (2014) Exergy, Performance And Environmental Impact Analysis Of Compression Refrigeration Systems. In: International Conference of Mechanical Engineering, Energy Technology and Management IMEETMCon 2014.

Adeniyi, Olalekan D. and Adeniyi, Mary I. and Olutoye, Moses A. and Ewan, Bruce C. R. and Okafor, Joseph O. and Afolabi, Eyitayo A. and Ayoola, A. A. and Ojewumi, M. E. and Omoleye, James (2018) COMPARISON OF THE ELECTROCHEMICAL PERFORMANCES OF MCDCFC USING HAND AND BALL MILLED BIOMASS CARBON FUELS. In: Theories, Methodologies, Tools and Applications of Computational Systems for Development, 2017.

Adenle, B.J. and Onaifo, F. and Alashiri, Olaitan and Adekusibe, K.G. and Adelakun, A. (2018) EVALUATION OF ELECTRICAL POWER OUTAGES: A RESTRUCTURING APPROACH IN NIGERIA. In: Power Outages, Electrical Energy, Evaluation, Restructuring, Reliability, Nigeria, 2018.

Aderibigbe, M.A and Adoghe, A. U. and Agbetuyi, Ayoade F. and Airoboman, A.E (2022) Impact of Distributed Generations on Power Systems Stability: A Review. In: Nigeria 4th International Conference on Disruptive Technologies for Sustainable Development (NIGERCON), 05‐07 April 2022, Lagos, Nigeria.

Aderibigbe, M.A and Adoghe, A. U. and Agbetuyi, Ayoade F. and Airoboman, A.E (2021) A Review on Optimal Placement of Distributed Generators for Reliability Improvement on Distribution Network. In: 2021 IEEE PES/IAS PowerAfrica, 23-27 Aug. 2021, Nairobi, Kenya.

Aderibigbe, M.A and Wara, S.T. and Airoboman, A.E (2017) Diesel Engine Generators Consumption/Emission Controls by Retrofitting for Sustainable Environment. In: IEEE PES/IAS PowerAfrica.

Adetiba, E. and Ifijeh, H. A. and Oguntosin, V. and Odunuga, Toluwani and Iweala, David and Akindele, Ayoola and Abayomi, Abdultaofeek and Obiyemi,, O.O. and Thakur, Surendra (2022) Development of an IoT Based Data Acquisition and Automatic Irrigation System for Precision Agriculture. In: 4th International Conference on Disruptive Technologies for Sustainable Development, 2022, Lagos, Nigeria.

Adetiba, E. and Ike, Dike U. and Owolabi, Folashade O. (2017) An Intelligent Foreign Exchange Robot (i-FOREXBOT) Development with Scale Conjugate Gradient Neural Network. In: The 22nd International Business Information Management Association (IBIMA) Conference, Rome, Italy, November 13-14, 2013.

Adetiba, E. and Oluleye, Olumide O. and Ifijeh, H. A. and Oguntosin, V. and Olaniyan, Olatayo M. and Akinola, Olubunmi Adewale and Afolabi, Gbenga and Odetola, Jacob O. and Abayomi, Abdultaofeek (2023) A Neural Network-based System Identification Model to Predict Output Current and Voltage of Solar Photovoltaic Panels. In: International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB‐SDG), 05‐07 April 2023, Omu‐Aran, Nigeria.

Adetiba, E. and Oluleye, Olumide O. and Ifijeh, H. A. and Oguntosin, V. and Olaniyan, Olatayo M. and Akinola, Olubunmi Adewale and Afolabi, Gbenga and Odetola, Jacob O. and Abayomi, Abdultaofeek (2023) System Identification Model to Predict Output Current and Voltage of Solar Photovoltaic Panels. In: International Conference on Science, Engineering and Business for Sustainable Development Goals, 05-07 April 2023, Omu-Aran, Nigeria.

Adetokun, Bukola and Adekitan, Aderibigbe I. and Shomefun, Tobi and Aligbe, Alex and Ogunjuyigbe, Ayodeji (2018) Artificial Neural Network-Based Capacitance Prediction Model for Optimal Voltage Control of Stand-alone Wind-Driven Self-Excited Reluctance Generator. In: IEEE PES/IAS PowerAfrica, 28-29 June 2018, Cape Town, South Africa, South Africa.

Adetokun, Bukola and Shomefun, Tobi and Adekitan, Aderibigbe I. and Aligbe, Alex and Orimogunje, Abidemi (2018) Development of an ANN-based Estimated Electricity Billing System. In: IEEE PES/IAS PowerAfrica, 28-29 June 2018, Cape Town, South Africa, South Africa.

Adewale, Adeyinka A. and John, S. N. and Adagunodo, Emmanuel R. (2016) Improving Prioritized Handover Performance for Mobile WiMAX by Dynamic Guard Channel Allocation and RSS Quality Factor. In: SAI Computing Conference, July 13-15, 2016, London, UK.

Adewale, Adeyinka A. and John, S. N. and Adagunodo, Emmanuel R. (2016) Performance Comparison of Dynamic Guard Channel Assignment with Buffered Prioritized Scheme for Mobile WiMAX Network. In: Proceedings of the World Congress on Engineering, June 29 - July 1, 2016, London, U.K..

Adewale, Adeyinka A. and John, S. N. and Adagunodo, Emmanuel R. and Ndujiuba, Charles Uzoanya (2016) Effect of Increasing Buffer Size on Prioritized Guard Channels with Queue during Call Traffic Congestion. In: International Conference on Computational Science and Computational Intelligence, 2016.

Adewale, Adeyinka A. and Matthews, V. O. and Adagunodo, Emmanuel R. and Adelakun, A. and John, S. N. (2016) Performance Evaluation of Dynamic Guard Channels Assignment with Queue and Prioritized Schemes. In: International Conference on Computational Science and Computational Intelligence, 2016.

Adewale, Adeyinka A. and Onaolapo, J. O. (2012) Development of Web-based Interactive Map Using Object-Oriented Programming Concept. In: EIE’s 2nd Intl’ Conf.Comp., Energy, Net., Robotics and Telecom, 2012.

Adewale, B and Adisa, O and Ndububa, C and Olawoyin, O and Adedokun, A (2017) ATTITUDE OF STUDENTS AND TEACHERS TOWARDS VOCATIONAL EDUCATION IN SECONDARY SCHOOLS IN OTA,OGUN STATE, NIGERIA. In: INTED2017 Conference, 6th-8th March 2017, Valencia, Spain.

Adewale, B and Adisa, O and Olawoyin, O and Adedokun, A (2017) ATTITUDE OF STUDENTS AND TEACHERS TOWARDS VOCATIONAL EDUCATION IN SECONDARY SCHOOLS IN OTA, OGUN STATE, NIGERIA. In: INTED 2017 Conference, 6th-8th March 2017, Valencia, Spain.

Adewale, B and Amgbari, E and Erebor, Emokpae and Tipili, Z and Ejiga, J (2017) ATTITUDE OF STUDENTS AND TEACHERS TOWARDS VOCATIONAL EDUCATION IN SECONDARY SCHOOLS IN OTA,OGUN STATE, NIGERIA. In: INTED2017, 6th-8th March 2017, Valencia, Spain. .

Adewale, B and Amgbari, E and Erebor, Emokpae and Tipili, Z and Ejiga, J (2017) PARENTAL ATTITUDE TOWARDS VOCATIONAL EDUCATION IN ADO-ODO OGUN STATE NIGERIA. In: INTED 2017 Conference, 6th-8th March 2017, Valencia, Spain.

Adewoyin, O.O and Joshua, Emmanuel O. and Akinyemi, M. L. and Omeje, Maxwell and Adagunodo, T. A. and Joel, E. S. (2020) Engineering Site Investigations using Surface Seismic Refraction Technique. In: 4th International Conference on Science and Sustainable Development (ICSSD 2020), 2020, Online.

Adeyemi-Kayode, Temitope M. and Orovwode, H. E. and Adoghe, A. U. and Misra, Sanjay and Agrawal, Akshat (2023) Short-Term Load Demand Forecasting Using Artificial Neural Network. In: International Conference on Recent Innovations in Computing, 03 May 2023, Online.

Adeyemi-Kayode, Temitope M. and Orovwode, H. E. and Williams, Chibuzor T. and Adoghe, A. U. and Chouhan, Virendra Singh and Misra, Sanjay (2022) Development of a Short Term Solar Power Forecaster Using Artificial Neural Network and Particle Swarm Optimization Techniques (ANN-PSO). In: International Conference on Machine Intelligence and Signal Processing, 2023, Online.

Adeyemo, Joke O. and Olugbara, O. O. and Adetiba, E. (2016) Smart city technology based architecture for refuse disposal management. In: IST-Africa Week Conference, .

Afolabi, A.O. and Amusan, L. M. and Owolabi, J. D and Ojelabi, Rapheal A. and Joshua, Opeyemi and Tunji-Olayeni, P .F (2018) Assessment of the Linkages and Leakages in a Cloud-Based Computing Collaboration among Construction Stakeholders. In: Construction Research Congress.

Afolabi, A.O. and Dada, Martin (2014) Evaluation Of Factors Affecting Housing And Urban Development Projects In Lagos State. In: Proceedings of the CIB W107 2014 International Conference,, 28th-30th January, 2014, Lagos, Nigeria.

Afolabi, A.O. and Eshofonie, E. E. and Akinbo, Faith (2019) Development of an Alumni Feedback System for Curriculum Improvement in Building Technology Courses. In: International Conference on Computational Science and Its Applications.

Afolabi, A.O. and Fagbenle, Olabosipo I. and Ojelabi, Rapheal A. and Amusan, L. M. and Tunji-Olayeni, P .F and Daniyan, Victor (2018) Development of a Web-Based Human Resource Sourcing System for Labour Only Contracts. In: Construction Research Congress.

Afolabi, A.O. and Fagbenle, Olabosipo I. and Tunji-Olayeni, P .F and Abimbola, Olumayowa (2017) Development of an on-site Builder's estimating app for construction waste reduction. In: Computing Networking and Informatics (ICCNI), 2017 International Conference on, 29-31 Oct. 2017, Lagos, Nigeria.

Afolabi, A.O. and Ojelabi, Rapheal A. and Amusan, L. M. and Adefarati, Fred (2017) Development of a web-based building profession career portal as a guidance information system for secondary school students. In: Computing Networking and Informatics (ICCNI), 2017 International Conference on, 29-31 Oct. 2017, Lagos, Nigeria.

Afolabi, A.O. and Ojelabi, Rapheal A. and Amusan, L. M. and Tunji-Olayeni, P .F and Omuh, I. O. and Emeghe, Ijeoma (2016) THE IMPACT OF EMBEDDED MULTIMEDIA VIDEO LEARNING OF BUILDING CONSTRUCTION PRACTICE ON CONSTRUCTION STUDENTS. In: INTED2016 Conference, 7th-9th March 2016,, Valencia, Spain.

Afolabi, A.O. and Oluwatobi, Stephen and Emebo, Onyeka and Misra, Sanjay and Garg, Lalit (2022) Evaluation of the Merits and Demerits Associated with a DIY Web-Based Platform for e-commerce Entrepreneurs. In: International Conference on Information Systems and Management Science.

Afolabi, A.O. and Tunji-Olayeni, P .F and Amusan, L. M. and Omuh, I. O. and Ojelabi, Rapheal A. and Oyeyipo, Opeyemi (2016) Safety Cultured Industry Through The Integration Of Occupational Health And Safety (OHS) Courses In The Built Environment Curriculum. In: INTED2016 Conference, 7th-9th March 2016, INTED2016 Conference.

Afolabi, A.O. and Tunji-Olayeni, P .F and Ojelabi, Rapheal A. and Omuh, I. O. (2018) Construction Waste Prevention as a Sustainable tool in Building Mega Cities: A Theoretical Framework. In: IOP Conf. Series: Earth and Environmental Science.

Afolalu, Sunday A. and Abioye, Abiodun A. and Dirisu, J. O. and Okokpujie, Imhade P. and Ajayi, O. O. and Adetunji, Olajide R. (2018) Investigation of Wear Land and Rate of Locally Made HSS Cutting Tool. In: International Conference on Nano and Materials Science AIP Conf..

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel (ASTM A36). In: 6th International Conference on Nano and Materials Science, 2018.

Afolalu, Sunday A. and Abioye, Oluwabunmi P. and Salawu, Enesi Y. and Okokpujie, Imhade P. and Abioye, Abiodun A. and Omotosho, Olugbenga Adeshola and Ajayi, O. O. (2018) Impact of Heat Treatment on HSS Cutting Tool (ASTM A600) and Its Behaviour during Machining Of Mild Steel(ASTM A36). In: International Conference on Nano and Materials Science.

Afolalu, Sunday A. and Okokpujie, Imhade P. and Salawu, Enesi Y. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ikumapayi, O. M. (2018) Study of the Performances of Nano-Case Treatment Cutting Tools on Carbon Steel Work Material during Turning Operation. In: International Conference on Nano and Materials Science.

Afolalu, Sunday A. and Okokpujie, Imhade P. and Salawu, Enesi Y. and Abioye, Abiodun A. and Abioye, Oluwabunmi P. and Ikumapayi, O. M. (2018) Study of the Performances of Nano-Case Treatment Cutting Tools on Carbon Steel Work Material during Turning Operation. In: 6th International Conference on Nano and Materials Science AIP Conf. Proc.

Afolalu, Sunday A. and Oluwaseyifunmi, Orenuga and Ongbali, Samson O. and Abioye, Abiodun A. and Okokpujie, Imhade P. and Olamilekan, Oloyede R (2018) The Study of the Impact of Nano Carbon Additives on Astm A53 Mild Steel During Machining. In: IOP Conf. Series: Materials Science and Engineering.

Afolayan, O. D. and Olofinade, O. M. and Akinwumi, I. I. (2019) Use of some agricultural wastes to modify the engineering properties of subgrade soils: A review. In: International Conference on Engineering for Sustainable World.

Agarana, M. C. and Gbadeyan, J.A. and Ajayi, O. O. (2016) Dynamic Response of Inclined Isotropic Elastic Damped Rectangular Mindlin Plate resting on Pasternak Foundation under a Moving Load. In: Proceedings of the International MultiConference of Engineers and Computer Scientists, March 16 - 18, 2016., Hong Kong.

Agashua, Lucia O. and Ogbiye, S. A. (2018) Influence of Cement, Bitumen and Lime on Some Lateritic Soil Samples as Pavement Material. In: IOP Conf. Series: Materials Science and Engineering 298, 2018.

Agboola, Oluranti and Fayomi, O. S. I and Ayoola, A. A. and Ayeni, .A. O. and Alagbe, Edith Egbimhanlu. and Sadiku, Rotimi Emmanuel and Popoola, A. P. I. (2022) Short review on the prospect of laser cladding for aluminum based alloys composite for automotive industries. In: APL Materials, 28–30 May 2021, Athens, Greece.

Agunbiade, A. T. and Agbalajobi, D. T. and Oyekunle, A. B. (2017) Assessment of Students' Use of Information and Communication Technology Facilities: A Case Study of Obafemi Awolowo University Library. In: CUCEN 2017, Covenant University, Ota.

Ajayi, O. O. and Okeowo, Opeyemi and Asaa, Samson Abiodun and Aboyade, Akinwale and Willoughby, A.A. (2015) NOVEL AIRFOIL DESIGN FOR SMALL HORIZONTAL AXIS WIND TURBINE: A PRELIMINARY RESULT. In: Third Southern African Solar Energy Conference (SASEC2015).

Ajayi, O. O. and Omowa, Olasubomi F. and Omotosho, Olugbenga Adeshola and Abioye, Oluwabunmi P. and Akinlabi, Esther T. and Akinlabi, Stephen A. and Abioye, Abiodun A. and Owoeye, Taiwo Felicia and Afolalu, Sunday A. (2018) Experimental Investigation of the Effect of ZnO-Citrus sinensis Nano-additive on the Electrokinetic Deposition of Zinc on Mild Steel in Acid Chloride. In: 147th Annual Meeting & Exhibition Supplemental Proceedings.

Ajayi-Majebi, J and Abioye, Oluwabunmi P. and Fayomi, O. S. I and Inegbenebor, A.O. (2020) Review of electrodeposition perspectives towards anticorrosion mitigation of mild steel. In: International Conference on Engineering for Sustainable World.

Ajibola, Abosede and Omoleye, James and Efeovbokhan, Vincent Enon (2018) Comparative Study of the Chemical Compositions of Liquid Fuel from Thermal Cracking of Low and High-Density Polyethylene Plastic Waste. In: IOP Conf. Series: Materials Science and Engineering.

Ajibola, Olawale O. E. and Ajala, Olamide S. and Akanmu, James O and Balogun, Oluwaseyi J. (2017) Optimizing Hydroelectric Power Generation: The Case of Shiroro Dam. In: World Congress on Engineering 2017 , July 5-7, 2017, London, U.K..

Akinola, S. R and Adewale , B. A. (2012) Climate Change,Urban Degreening and Flooding in Nigerian Cities:Reducing Vulnerability Through Polycentric Planning and Urban Greeenery Strategy(PPUGS). In: International Research Conference on Sustainable Development, Nov,7th-9th,2012, University of Ibadan,Ibadan.

Akinrinmade, A. and Adetiba, E. and Badejo, J. A. and Oshin, Oluwadamilola (2023) An Active Speaker Detection Method in Videos using Standard Deviations of Color Histogram. In: 2023 International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB-SDG), 05-04-April 2023, Omu-Aran, Nigeria.

Akinwumi, I. I. and Afolayan, O. D. and Okeke, C. U. and Badiru, O. O. and Jolayemi, Kayode J. (2021) Suitability of using borrow pit soils collected from Southwestern Nigeria as landfill liners. In: IOP Conf. Series: Materials Science and Engineering.

Akinwumi, I. I. and Ojuri , O. O. and Edem, D. and Ogbiye, S. A. (2016) Sawdust Stabilization of Lateritic Clay as a Landfill Liner to Retain Heavy Metals. In: Geo-Chicago 2016: Sustainable Geoenvironmental Systems, August 14–18, 2016, Chicago, Illinois, United States of America.

Akinwumi, I. I. and Ojuri , O. O. and Ogbiye, S. A. and Booth, C. A. (2016) Engineering of clay lining system for landfills using bio-material to improve its adsorption of Pb2+. In: Engineering and Life Conference, October 19-21, 2016, Hannover, Germany.

Akpoborie, J. and Fayomi, O. S. I and Inegbenebor, A.O. and Ayoola, A. A. and Dunlami, O. and Samuel, O.D. and Agboola, Oluranti (2021) Electrochemical reaction of corrosion and its negative economic impact. In: IOP Conference Series: Materials Science and Engineering.

Alagbe, O. A. and Aderonmu, P. A and Alagbe, T. A. and Sonola, O. and Olagunju , O. and Erebor, M. (2017) STUDENTS’ PERCEPTION OF DESIGN STUDIO JURY IN SCHOOLS OF ARCHITECTURE IN NIGERIA. In: 11th International Technology, Education and Development Conference, 6-8 March, 2017, Valencia, Spain.

Alatishe, A. S. and Adu, O. I. and Atayero, A. A. and Idachaba, F.E. (2014) A Performance Review of the Different Path Loss Models for LTE Network Planning. In: Proceedings of the World Congress on Engineering, July 2 - 4, 2014, London, U.K..

Ali, D. O. and Agboje, O. E. (2012) Design and Simulation of Wave Shaping Schemes for a Virtual Data Communication and Impaired Link Environment System for Advanced ICT Education. In: EIE’s 2nd International Conference on Computing, Energy, Networking, Robotics and Telecommunications (eieCon2012).

Aligbe, Alex and Ikechukwu, N. G. and Okoyeigbo, Obinna and Uyi, Aiyudubie and Olajube, Ayobami and Adoghe, A. U. (2021) Development and Implementation of Location-Based Mobile Job Portal for Blue-Collar Jobs in Nigeria. In: International Conference on Engineering for Sustainable World, 2021, Online.

Amusan, L. M. and Akanya, Cinwosoko Ninma and Adeyemo, Kingsley A and Ayo, C. K. and Owolabi, J. D and Dabo, Baba Mohammed (2019) Renewal and Upgrading System For A Sustainable Urban- Rural Housing System Development: Panacea To Accommodation, Employment And Healthcare Issues. In: International Conference on Energy and Sustainable Environment.

Amusan, L. M. and Opeyemi, Joshua and Ebunoluwa, Adeyemi and Omuh, I. O. (2019) Neural network and probabilty based cost expectation limit model for residential building cost. In: International Structural Engineering and Construction Conference.

Amusan, L. M. and Tunji-Olayeni, P .F and Afolabi, A.O. and Ojelabi, Rapheal A. and Owolabi, J. D and Adeboye, A. B. (2016) Gender-Based Competitive Performance In Built Environment Technical Related Courses In A Tertiary Institutionː Covenant University Case Study. In: INTED2016 Conference.

Amusan, L. M. and Tunji-Olayeni, P .F and Afolabi, A.O. and Omuh, I. O. and Ojelabi, Rapheal A. and Oluwatobi, A. O. (2016) Remodularising Technical Institutions TowardsOWARDS Quality Manpower Delivery In Construction SectorR In Nigeria. In: INTED2016 Conference, 7th-9th March 2016, Valencia, Spain.

Amuta, Elizabeth and Awelewa, A. A. and Olajube, Ayobami and Somefun, Tobilola Emmanuel and Afolabi, G. T. and Uyi, Aiyudubie (2020) Power line carrier technologies: a review. In: IOP Conf. Series: Materials Science and Engineering.

Anakhu, Peter I. and Abioye, Abiodun A. and Bolu, Christian and Azeta, A. A. (2017) Modeling of the kinematic geometry of spur gears using matlab. In: MATEC Web of Conferences.

Anakhu, Peter I. and Abioye, Abiodun A. and Bolu, Christian and Azeta, Joseph (2018) Modeling of the kinematic geometry of spur gears using matlab. In: MATEC Web of Conferences.

Anakhu, Peter I. and Bolu, Christian and Abioye, Abiodun A. and Onyiagha, G. (2018) Cost-effectiveness Management of a Compressed-air System Using an Energy Analysis Application. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Anawe, Paul Apeye Lucky and Raji, A. O and Fayomi, O. S. I and Efeovbokhan, Vincent Enon (2017) Influence of Composite Nano Coating on Ternary Sulphate Co-deposition: Corrossion and Surface Characterization. In: International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2017, 23-25 January 2017, Kruger National Park.

Atayero, A. A. and Ajijola, Oluwaseun and Popoola, Segun I. and Matthews, V. O. (2016) Development of a Wireless Power Transfer System using Resonant Inductive Coupling. In: World Congress on Engineering and Computer Science, October 19-21, 2016, San Francisco, USA.

Atayero, A. A. and Ogundeji, Ayodeji V. and Adedokun, Michael O. (2015) DEVELOPMENT OF VIRCEL: A VIRTUAL COMMUNICATION ENGINEERING LABORATORY. In: 7th International Conference on Education and New Learning Technologies, 6-8 July, 2015, Barcelona, Spain.

Atayero, A. A. and Ozara, Richard and Popoola, Segun I. and Matthews, V. O. (2016) Development of Smart Assistive DTMF Home Automation System for Ageing Population. In: World Congress on Engineering and Computer Science, October 19-21, 2016, San Francisco, USA.

Atuegwu , Charity and Okokpujie, Kennedy O. and Noma-Osaghae , Etinosa (2017) A Bimodal Biometric Student Attendance System. In: 2017 IEEE 3rd International Conference on Electro-Technology for National Development (NIGERCON) , 7-10 Nov - 2017, Federal University of Technology, Owerri, Nigeria. . (In Press)

Awoyera, P. O. and Enemchukwu, Nonso G. and Karri, R. R. (2023) Performance validation of low-cost building insulation materials via the thermal characteristics and costs of insulation materials. In: AIP Conference.

Ayeni, .A. O. and Ogu, R. and Awosusi, A. A. and Daramola, M. O. (2016) ALKAINE PEROXIDE OXIDATION PRETREATMENT OF CORN COB AND RICE HUSKS FOR BOICONVERSION INTO BIOCOMMODITIES: PART A- ENZYMATIC CONVERTIBILITY OF PRETREATED RICE HUSKS TO REDUCING SUGAR. In: EUROPEAN BIOMASS CONFERENCE AND EXIBITION, 6-9 JUNE 2016.

Azeta, Joseph and Bolu, Christian and Abioye, Abiodun A. and Oyawale, Fetus A (2018) A review on humanoid robotics in healthcare. In: MATEC Web of Conferences, 2017.

Azeta, Joseph and Bolu, Christian and Abioye, Abiodun A. and Oyawale, Fetus A (2017) A review on humanoid robotics in healthcare. In: MATEC Web of Conferences.

Azeta, Joseph and Bolu, Christian and Hinvi, D. and Abioye, Abiodun A. (2019) Obstacle detection using ultrasonic sensor for a mobile robot. In: International Conference on Mechatronics and Control Engineering.

Azeta, Joseph and Ishola, Felix and Akinpelu, T. and Bolu, Christian and Dirisu, Joy Favour and Fajobi, M. A. and Salawu, Enesi Y. (2019) An Experimental Evaluation of LTA on the performance of a drone. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Azubuike, Ijeoma Irene and Ikiensikimama, Sunday and Orodu, O. D. (2016) Forecasting Gas Compressibility Factor Using Artificial Neural Network Tool for Niger-Delta Gas Reservoir. In: SPE Nigeria Annual International Conference and Exhibition, 2-4 August 2016, August, Lagos,.

Babalola, P.O. and Atiba, Opemipo E. (2020) Solar powered cars - a review. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Babalola, P.O. and Bolu, Christian and Inegbenebor, A.O. and Kilanko, O. O (2018) Graphical Representations of Experimental and ANN Predicted Data for Mechanical and Electrical Properties of AlSiC Composite Prepared by Stir Casting Method. In: IOP Conf. Series: Materials Science and Engineering.

Babalola, P.O. and Kilanko, O. O and Banjo, SolomonO. and Ogulu, J.O. and Makinde, Adebisi and Jolayemi, Kayode J. and Ayara, Williams A. (2020) Reinforcement of AA1237 with Al2 O3 to form Metal Matrix Composite. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Babalola, P.O. and Kilanko, O. O and Bolu, Christian and Inegbenebor, A.O. and Oyawale, Fetus A and Adeosun, Oluropo (2018) Empirical Models for Mechanical and Electrical Characteristics of Wrought Aluminium Alloy Reinforced with Silicon Carbide Particles. In: IOP Conf. Series: Materials Science and Engineering.

Babalola, P.O. and Omada, J. E. and Kilanko, O. O and Banjo, SolomonO. and Ozuor, O. (2019) Performance Evaluation of a Centrifugal Pump with different Impeller Materials. In: International Conference on Engineering for Sustainable World, 2019, Online.

Babalola, P.O. and Oriyomi, Moses Oluwayimika (2018) The Development of Fume Extractor for a Welding Booth. In: IOP Conf. Series: Materials Science and Engineering.

Babatunde, Olubayo Moses and Ayegbusi, Clement Olaniyi and Babatunde, Damilola Elizabeth and Oluseyi, Peter Olabisi and Somefun, Tobilola Emmanuel (2020) Electricity Supply in Nigeria: Cost Comparison between Grid Power Tariff and Fossil-Powered Generator. In: International Journal of Energy Economics and Policy.

Badejo, J. A. and Eke, Chinonso C and Popoola, Segun I and Odu, Tiwalade and Atayero, A. A. (2017) Integrating Automated Fingerprint-based Attendance into a University Portal System. In: 2017 International Conference on Computational Science and Computational Intelligence CSCI 2017, 14 - 16 December 2017, Las Vegas, NV, USA. (In Press)

Bamigboye, Gideon and Adeyemi, Gideon Adewale (2016) ECONOMIC CRISIS IMPACT ON EDUCATION AND TEACHERS: CASE STUDY OF SOUTH WEST NIGERIA. In: INTED2016 Conference, 7th-9th March 2016, Valencia, Spain. (In Press)

Bamigboye, Gideon and Oderinde, FO and Olukanni, D. O. and Ngene, Ben U. and Adeyemi, Gideon Adewale and Adegoke, D.D. (2021) Utilization of Poly (ethylene terephthalate) Waste and Seashell (Senilia senilis) in the Production of Roof Tiles. In: International Conference on Engineering for Sustainable.

Banjo, SolomonO. and Babalola, P.O. and osagie, I. and Joseph, O. O and Williams, Akan B. and Fayomi, O. S. I and Bolu, Christian and Afolalu, Sunday A. (2020) Design and development of a table-mounted manual drilling machine for the rural purpose. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Banjo, SolomonO. and Bolaji, Bukola O. and Ajayi, O. O. and Babalola, P.O. and Ibhadode, Osagie and Onokwai, Anthony O. (2019) Performance enhancement using appropriate mass charge of R600a in a developed domestic refrigerator. In: International Conference on Energy and Sustainable Environment, 2019, Online.

Bello, Oyewole Mustapha and Olukolajo, Michael Ayodele (2016) Adequate Compensation as a Tool for Conflict Resolution in Oil Polluted Wetlands of Niger Delta Region of Nigeria. In: 3rd International Conference On African Development Issues (CU-ICADI), May 9- May 11 2016, Covenant University, Ota, Nigeria.

Busari, A. A. and Adeyanju, EMMANUEL and Loto, R. T. and Ademola, D. (2019) Recycled Aggregate in Pavement Construction: Review of Literatures. In: International Conference on Engineering for Sustainable World.

Busari, A. A. and Akinmusuru, J. O. and Dahunsi, Bamidele and Ogbiye, S. A. and Okeniyi, Joshua Olusegun (2017) Self-compacting concrete in pavement construction: Strength grouping of some selected brands of cements. In: International Conference on Technologies and Materials for Renewable Energy, Environment and Sustainability, TMREES17, 21-24 April 2017, Beirut Lebanon.

Busari, A. A. and Loto, R. T. and Eronmosele, Esekhaigbe (2022) Assessment of the Rheological properties of Aluminum dross in self-compacting concrete. In: Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Published under licen.

Busari, A. A. and Okeniyi, Joshua Olusegun and Bamigboye, Gideon and Tenebe, I.T. and Oniemayin, Babatunde I. and Durotoye, Taiwo Omowunmi (2016) TUTORING AND PARENTING INFLUENCE ENGINEERING: IMPACT ON FEMALE TEENAGERS. In: 10th Annual International Tecnology, Education and Development Conference, 7th-9th March 2016, Valencia, Spain.

Daramola, P. and Obindah, G. and Matthew, Oluwatoyin and Ihayere, O. (2021) Carbon Emission And Population Growth: Evidence From The Magna Cum Laude Oil Producing African Countries. In: International Conference on Energy and Sustainable Environment I, 2021, Online.

Daramola, S. A. and Adefuminiyi, Morakinyo A. and John, Temitope M. (2016) Online Signature for Attendance Verification System using Levenberg-Marquardt Neural Network. In: World Congress on Engineering, June 29 - July 1, 2016, London, U.K..

Daramola, S. A. and Adefuminiyi, Morakinyo A. and John, Temitope M. (2016) Review and Proposed Methodology for a Lecture Attendance System using Neural Network. In: World Congress on Engineering, June 29 - July 1, 2016, London, U.K..

Dare-Abel, O.A. and Solanke, Olajide (2014) Incorporating Aspects of the Glass-Box Design Method in Building Information Modelling (BIM). In: 1st International Conference on Smart, Sustainable and Healthy Cities: CIB-MENA 2014, 14th-16th Dec. 2014, Abu-Dhabi, UAE.

Dare-Abel, Oladipo Ayodeji (2010) Solar Powered Buildings in Nigeria: challenges and opportunities for the future. In: International Conference on Sustainable Development and Environmental Protection – Procedures and Strategies for Developing Nations, Bells University of Technology, Ota.

Dirisu, J. O. and Oyedepo, Sunday Olayinka and Fayomi, O. S. I (2019) Thermal energy assessment of oil bean stalk as a novel additive to building ceilings. In: AIP Conference Proceedings.

Dirisu, J. O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Mmuokebe, J.I (2018) Performance assessment of the firefighting personal protective tunic. In: Technologies and Materials for Renewable Energy, Environment and Sustainability, 19–21 September 2018, Athens, Greece.

Dirisu, Joy Favour and Fayomi, O. S. I and Oyedepo, Sunday Olayinka (2018) Thermal Emission and heat transfer characteristics of ceiling materials: a necessity. In: Technologies and Materials for Renewable Energy, Environment and Sustainability, 19–21 September 2018, Athens, Greece.

Dong, Shao-gang and Tang, Zhonghua and Liu, Bai-wei and Orodu, O. D. (2009) Numerical modeling of the environment impact of landfill leachate leakage on groundwater quality-A field application. In: International Conference on Environmental Science and Information Application Technology, 2009, IEEE computer Society.

Duruji, M. M. and Dibia, O. (2017) METHODOLOGIES FOR USING ICTS TO PROMOTE GOOD GOVERNANCE: A STUDY OF THE VEHICLES INSPECTION OFFICE (VIO), ABUJA. In: CUCEN 2017, Covenant University, Ota.

Ede, A. N. and Nwankwo, C and Oyebisi, S.O and Olofinnade, O. M. and Okeke, A and Busari, A. A. (2019) Failure Trend of Transport Infrastructure in Developing Nations: Cases of Bridge Collapse in Nigeria. In: 1st International Conference on Sustainable Infrastructural Development, 2019, Online.

Ede, A. N. and Oshokoya, O.O and Oluwafemi, J.O and Oyebisi, S.O and Olofinnade, O. M. and Akpabot, Akpabot Ifiok (2018) Weight Optimization of Square Hollow Steel Trusses Using Genetic Algorithm. In: International Conference on Engineering for a Sustainable World (ICESW), 2018.

Edun, B.M and Ajayi, O. O. and Babalola, P.O. and Salawu, Enesi Y. (2020) Effect of Heat Treatment Methods on the Fatigue Behaviour of Hammermill: A Review. In: ICISW�.

Ehinmowo, A. B. and Cao, Yi (2015) Stabilizing slug flow at large valve opening using active feedback control. In: International Conference on Automation & Computing, 11-12 September 2015, University of Strathclyde, Glasgow, UK,.

Ejemeyovwi, Jeremiah Ogaga and Akhigbemidu, Sarah Adesuwa and Egharevba, W. and Arome, V. and Akaraiwe, O. and Ogunlusi, T. and Owuama, I. (2017) Innovation: ICT Adoption and Crop Production in Nigeria. In: CUCEN 2017, Covenant University, Ota.

Ejemeyovwi, Jeremiah Ogaga and Osabuohien, E. S. C. (2017) MOBILE TECHNOLOGY ADOPTION AND INCLUSIVE GROWTH: DYNAMIC PANEL EVIDENCE FROM WEST AFRICA. In: CUCEN 2017, Covenant University, Ota.

Ekeh, J.C. and Wara, S.T. and lkwu, E.O and Torru, H. R. (2007) Optimal Operation Of Power Transformers In Power Systems In A Depressed Economy. In: 7TH lN'FERNA TI6NAL CONFERENCE ON POWER SYSTEM OPERATION AND PLANNING.

Ekwueme, M. and Folarin, S. F. (2017) ROLE OF SOCIAL MEDIA IN ELECTIONEERING: THE CASE OF THE NIGERIAN 2015 PRESIDENTIAL ELECTION. In: CUCEN 2017, Covenant University, Ota.

Emenike, PraiseGod C and ARAOYE, OYINDAMOLA VICTORIA and ACADEME, SUNDAY OYAOGBODE and Unokiwedi, P. and Omole, D. O. (2022) The effects of microplastics in oceans and marine environment on public health – a mini-review. In: IOP Conference Series: Earth and Environmental Science.

Emetere, Moses and Akinyemi, M. L. and Sanni, Samuel Eshorame (2016) Verification of Aerosols Loading Over Kano: A Theoretical Estimation via Mathematical Rudiments. In: Proceedings of the World Congress on Engineering 2016 Vol II WCE 2016, June 29 - July 1, London, U.K..

Emetere, Moses and Olawole, O. F. and Sanni, Samuel Eshorame (2016) Theoretical Design of Lightning Panel. In: AIP Conference .

Emetere, Moses and Omotosho, T. V. and Sanni, Samuel Eshorame (2018) Confirmation of carbon monoxide transport over West Africa. In: International Conference on Science & Engineering in Mathematics, Chemistry and Physics.

Emetere, Moses and Sanni, Samuel Eshorame and Agarana, M. C. (2016) Virtual Observation of Femtosecond Spin Dynamics Mechanism in Graphene. In: Proceedings of the World Congress on Engineering 2016 Vol I WCE 2016, June 29 - July 1, London, U.K..

Enesi, Salawu Y and Emuowhochere, Oghenevwegba and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Esther T. and Akinlabi, S.T (2019) Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach. In: 148th Annual Meeting & Exhibition .

Erebor, Emokpae and Aderonmu, P. A and Adewale , B. A. and Sholanke, Anthony Babatunde and Jegede, Foluke (2017) SKILLS SET DETERMINANTS OF IND-CADETS WORKFORCE IN HIGHTECH CONSTRUCTION COMPANIES IN LAGOS NIGERIA. In: 11th International Technology, Education and Development Conference, 6-8 March, 2017, Valencia, Spain.

Eyitayo, Jesuloluwa S and Badejo, J. A. and Atayero, A. A. (2018) FirstSteps: A mHealth tool for Children Registration and Monitoring. In: International Conference on Computational Science and Computational Intelligence (CSCI), IEEE.

FAGBENLE, EMMANUEL OLABAYO and Olukanni, D. O. (2022) Production and purification of biogas from cassava peel using cow dung as inoculum. In: Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Published under licen.

Fadairo, A. S. A. and Adekomaya, O. and Falode, O. (2009) Effect of Drilling Cuttings Transport on Pressure Drop in a Flowing Well. In: Middle East Drilling Technology Conference & Exhibition, 26-28 October 2009, Manama, Bahrain.

Fadairo, A. S. A. and Orodu, O. D. and Falode, O. (2013) Investigating the Carrying Capacity and the Effect of Drilling Cutting on Rheological Properties of Jatropha Oil Based Mud. In: SPE Nigeria Annual International Conference and Exhibition, 5-7 August 2016, Lagos, Nigeria.

Fagbenle, Olabosipo I. and Joshua, Opeyemi and Afolabi, A.O. and Ojelabi, Rapheal A. and Fagbenle, Oluseyi and Fagbenle , Ayoola O. and Akomolafe, Maryam (2018) Cost Management Practice of Construction Firms and Its Influencing Factors: Lessons from Southwestern Nigeria. In: Construction Research Congress.

Fagbenle, Olabosipo I. and Joshua, Opeyemi and Afolabi, A.O. and Ojelabi, Rapheal A. and Fagbenle, Oluseyi and Fagbenle , Ayoola O. and Akomolafe, Maryam (2018) A Framework for Enhancing Contractor-Subcontractor Relationships in Construction Projects in Nigeria. In: Construction Research Congress.

Falope, F. D and Orodu, O. D. and Osayande, I and Uhunoma, U. (2016) Improved Drilling Efficiency via Enhanced Water Based Mud in the Niger Delta. In: SPE Nigeria Annual International Conference and Exhibition, 4-6 August 2016, Lagos, Nigeria.

Fayomi, O. S. I and Anawe, Paul Apeye Lucky and Inegbenebor, A.O. and Udoye, Nduka Ekene (2018) Comparative Assessment Of The Microhardness And Plastic Degradation Mechanism Of deposited Modulated Coatings On Mild Steel. In: AIP Conference Proceedings, 2018.

Fayomi, O. S. I and Joseph, O. O and Popoola, A. P. I. (2017) Structural properties and microhardness performance of induced composite coatings filled with Cocos nucifera-tin functionalized oxide. In: International Conference on Technologies and Materials for Rene wable Energy, Environment and Sustainability, TMREES1, 21-24 April, Beirut Lebanon.

Fayomi, O. S. I and Okokpujie, Imhade P. and Kilanko, O. O (2018) Challenges of Research in Contemporary Africa World. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Fayomi, O. S. I and Okokpujie, Imhade P. and Udo, Mfon .O (2018) The Role of Research in Attaining Sustainable Development Goals. In: IOP Conf. Series: Materials Science and Engineering.

Fayomi, O. S. I and Olusanyan, D. and Loto, C. A. and Udoye, Nduka Ekene (2021) Insight on the Electrodeposition Technology and Parameter for Corrosion Control of Structural Steel. In: ICSID 2020, 2021, Online.

Fayomi, O. S. I and Popoola, A. P. I. and Joseph, O. O (2017) Assessment of Potassium Chromate Inhibition and Adsorption on Type A513 Mild Steel in Simulated Contaminated Media. In: International Conference on Technologies and Materials for Renewable Energy, Environment and Sustainability, TMREES17, 21-24 April, Beirut Lebanon.

Folorunso, Clement Oluwole and Izobo-Martins, O. and Adeboye, A. B. and Aduwo, B. E. (2014) Maintenance Challenges Of Multi-Owner Multi-Storey Residential Buildings In Lagos, Nigeria. In: International Conference on Science, Technology, Education, Arts, Management and Social Sciences, May, 2014, Afe Babalola University, Ado-Ekiti, Nigeria,.

Fulani, O. and Alagbe, O. A. and Aderonmu, P. A and Jegede, Foluke and Adewale , B. A. (2016) GENDER, LEARNING STYLES AND PERFORMANCE OF 1ST YEAR ARCHITECTURE STUDENTS: FIRST STAGE OF A LONGITUDINAL STUDY. In: EDULEARN16 Conference, 4th-6th July 2016, Barcelona, Spain.

Fulani, O. and Pase, Olubukunola and Omeize, Abel and Daniels, Joyce and Alagbe, Oluwole and Aderonmu, P. A and Udiminue, Joshua (2017) GENDER AND CAREER ASPIRATIONS OF ARCHITECTURE STUDENTS. In: INTED2017 Conference, 6th-8th March 2017, Valencia, Spain.

Gershon, Obindah and Gershon, E. (2020) Adopting Hybrid Energy Technology for Carbon Emissions Reduction in Nigeria’s Telecommunications Industry. In: 4th International Conference on Science and Sustainable Development (ICSSD 2020), 2020, Online.

Ibhaze, Augustus E. and Ajose, Simeon O. and Atayero, A. A. and Idachaba, F.E. (2016) Propagation Model Optimization Based on Measurement from Macrocell Sites in Ikorodu-Epe, South-Western Nigeria. In: 3rd International Conference On African Development Issues (CU-ICADI), May 9- May 11 2016, Covenant University, Ota, Nigeria.

Ibikunle, F. and John, S. N. (2008) WiMAX - appropriate technology to provide affordable access to ICTs infrastructure and services in developing countries. In: IET Conference on Wireless, Mobile and Multimedia Networks, 2008, Mumbai, India..

Ibisola, A.S. and Oni, A.S and Peter, Nkolika Joy (2015) The Relevance and Application of ICT in Estate Surveying and Valuation in Ogun State. In: International Conference on African Development Issues (CU-ICADI) 2015: Information and Communication Teclmology Track, African Leadership Development Centre, Covenant University Canaanland, Ota Ogun State, Nigeria.

Idachaba, F.E. (2017) 3G-5G Spectrum Bundling: Strategies for Rapid Technology Adoption for the 5G Communication Standard. In: World Congress on Engineering and Computer Science, October 25-27, 2017, San Francisco, USA.

Idachaba, F.E. (2016) 5G networks: Open network architecture and densification strategies for beyond 1000x network capacity increase. In: 2016 Future Technologies Conference (FTC), 6-7 Dec. 2016, San Francisco, CA, USA.

Idachaba, F.E. (2018) DEVELOPMENT OF A RAPID MENTORING SCHEME FOR MANAGING LARGE CLASSES IN ENGINEERING DEPARTMENTS. In: INTED2018 Conference, 5th-7th March 2018, Valencia, Spain.

Idachaba, F.E. (2018) OUTCOME BASED ENGINEERING CURRICULUM DESIGN: A SYSTEM FOR CURRICULUM STREAMLINING AND GRADUATE QUALITY IMPROVEMENT IN ENGINEERING. In: INTED2018 Conference, 5th-7th March 2018, Valencia, Spain.

Idachaba, F.E. (2017) RFID Applications for Asset Monitoring and Multi-Level Asset Tracking. In: World Congress on Engineering and Computer Science, October 25-27, 2017, San Francisco, USA.

Idachaba, F.E. (2017) Spectrum Bundling Architectures for Increased Traffic Capacity in Mobile Telecommunication Networks. In: the International MultiConference of Engineers and Computer Scientists, March 15 - 17, 2017, Hong Kong.

Idachaba, F.E. and Ike, Dike U. and Orovwode, H. (2014) Future Trends in Fiber Optics Communication. In: the World Congress on Engineering 2014, July 2 - 4, 2014, London, U.K..

Idachaba, F.E. and Mbeh, K.E and Oshin, Oluwadamilola and Oni, O.O. (2015) Webportal Applications: Automated Student Clearance Portal. In: World Congress on Engineering, July 1 - 3, 2015, London, U.K..

Idachaba, F.E. and Olowoleni, J. O. and Ibhaze, Augustus E. (2017) Design of an Automatic Renewable Energy Supply and Switching System. In: World Congress on Engineering and Computer Science, October 25-27, 2017, San Francisco, USA.

Idachaba, F.E. and Olowoleni, J. O. and Ibhaze, Augustus E. and Oni, O.O. (2017) IoT Enabled Real-Time Fishpond Management System. In: World Congress on Engineering and Computer Science, October 25-27, 2017, San Francisco, USA.

Idachaba, F.E. and Oni, O.O. (2015) Low Power VTOL UAV Deployments for Urban Area Monitoring. In: World Congress on Engineering.

Idama, Enyomeji Ademu and Efeovbokhan, Vincent Enon and Alagbe, Edith Egbimhanlu. (2018) Investigating the Viability of Hydrogen Production from Sodium Borohydride Using Acetic Acid and Extracts from Spoilt Lemon, Lime and Orange. In: IOP Conf. Series: Materials Science and Engineering.

Ifijeh, H. A. and Idachaba, F.E. and Oluwafemi, I. B. (2015) Performance Evaluation of The Quality of VoIP Over WLAN Codecs. In: The World Congress on Engineering, July 1 - 3, 2015, London, U.K..

Igba, U. T. and Akinyele, J. O. and Ehikhuenmen, S. O. and Oyebisi, S.O and Omotainse, P. O. and Anyanwu, B. U. (2019) A comparative study on the strength characteristics of Grade 25 and Grade 30 rice husk ash blended cement concrete. In: 1st International Conference on Sustainable Infrastructural Development, 2019, Online.

Ihayere, O. and Alege, P. O. and Ejemeyovwi, J. O. and Daramola, P. (2021) INFORMATION COMMUNICATION TECHNOLOGY ACCESS AND USE TOWARDS ENERGY CONSUMPTION IN SELECTED SUB SAHARAN AFRICA. In: International Conference on Energy and Sustainable Environment, 2021, Online.

Ikumapayi, O. M. and Okokpujie, Imhade P. and Afolalu, Sunday A. and Ajayi, O. O. and Akilabi, E. T. and Bodunde, O. P (2018) Effects of Quenchants on Impact Strength of Single-Vee Butt Welded Joint of Mild Steel. In: The 1st International Conference on Engineering for Sustainable World, 2018.

Ilaboya, I.R. and Wara, S.T. (2009) Mitigating Climatic Changes Through Emission Reduction Technology. In: Industrial and Commercial Use of Energy Conference.

Ilaboya, I.R. and Wara, S.T. (2008) Towards An Effective Capacity Building Programme For Sustainable Development. In: 6th International Conference on The Role Of Engineers In Meeting Mllennium Develpment Goals In Lesser Economies, 10 - 12 December 2008, Arusha, Tanzania.

Ilaboya, I.R. and Wara, S.T. and Hymore, F. K. (2007) The Role Of Professionals In Effective Facilities Management And Maintanance. In: Proceedings of the conference on Facilities Management/Maintenance , Enugu, Nigeria.

Inegbenebor, A. O. and Abdulkareem, Ademola (1993) Design and Construction of Sheabutter Extraction Machine for Rural Areas In The Developing Countries. In: FIRST AFRICA-USA INTERNATIONAL CONFERENCE ON MANUFACTURING TECHNOLOGY, Ikeja Lagos, Nigeria.

Inegbenebor, A.O. (1994) The Beneficial Effect Of Higher Molybdenum Content In Reducing Brittleness In Some Higher Strength Manganese Steels. In: Second International Conference on Manufacturing Technology, November 7-9, 2012, Texas.

Inegbenebor, A.O. (2001) Design And Fabrication Of Briquette Compressing Machine For Useful Product From Agro and Food Waste. In: CONFERENCE ON NEW PRODUCTS AND ; TECHNOLOGIES FOR SMALL AND MEDIUM ENTERPRISES.

Inegbenebor, A.O. (1994) Heat Treatment Of Some Nigerian Constructional . Steels And Its Technological Application. In: Second Africa-USA International Conference On Manufacturing Technology, 8-11August 1988, Ikeja Lagos, Nigeria.

Inegbenebor, A.O. (1995) The Need for Metal And Materials Science Laboratory In Nations Research And Development. In: Sympoisum On Chemstry & Biotechnology For Natioal development.

Inegbenebor, A.O. (1993) The Process of a New Wear-Resistance Steel. In: FffiST AFRICA-USA D\TERNATJONA.L CONFERENCE ON MANUFACTURING TECHNOLOGY, JANUARY11-14, 1993, LAGOS NIGERIA.

Inegbenebor, A.O. (1984) Quality, Strength And Standard For Nigerian Steel And Petrochemical Products. In: NSE CONFERENCE.

Inegbenebor, A.O. and Jones, R. D. and Ralph, Brian (1987) Models Of Tensile Behavior OF Meta-Stable Fe-Mn-Mo Alloys. In: 8th Risflllntemational Symposium on Metallurgy and Materials Science.

Iroham, C.O. and Oluwatobi, A. O. and Oloke, C. Olayinka (2015) Interval Estimate in Plant and Machinery Valuation: A Guide against Variance for Capacity Development amongst Estate Valuers. In: International Conference on African Development Issues (CU-ICADI) 2015: Social and Economic Models for Development Track, African Leadership Development Centre, Covenant University Canaanland, Ota Ogun State, Nigeria.

Isiorho, S. A. and Akinwumi, I. I. and Omole, D. O. and Ede, A. N. (2022) Decades of water resources research works in Nigeria: What has changed? In: Groundwater Week.

Jegede, Foluke and Adewale , B. A. and Aderonmu, P. A and Ibem, Eziyi O. and Oluwatayo, Dapo and Fulani, O. (2017) DESIGNING TO MEET INDIGENOUS NEEDS: PLACE OF TRADITIONAL STUDIES IN ARCHITECTURAL EDUCATION. In: INTED2017 Conference, 6th-8th March 2017, Valencia, Spain.

John, S. N. and Aderemi, Adewale Victor and Atayero, A. A. (2008) A Simulation Model for Determining Data Exchange Mode Analysis Network Influence. In: 16th Telecommunications Forum TELFOR 2008, 25th - 27th November 2008 , Serbia, Belgrade..

John, S. N. and Itaketo, I. N. and Adewale, Adeyinka A. (2009) Automation and Easy Accessibility of Medical Services in Nigeria (ICT and Medicine). In: International Conference on Managing Current Global Challenges: IT Strategies and Tools, July 21st – 24th, 2009, MaCGlobe ’09 Nigeria Computer Society, Abuja.

John, Temitope M. and Orovwode, H. E. and Wara, S.T. (2017) PARADIGMS FOR SUSTAINABLE AND CLEAN ENERGY ACCESSIBILITY FOR SUB-SAHARAN AFRICA. In: 11th International Renewable Energy Storage Conference, March 2017, Dusseldorf, Germany.

John, Temitope M. and Orovwode, H. E. and Wara, S.T. (2017) Pilot Solar-PV Rural Electrification Scheme for Isalu Community in Ota Nigeria. In: 11th International Renewable Energy Storage Conference, March 2017, Dusseldorf, Germany.

John, Temitope M. and Ucheaga, E. G. and Badejo, J. A. and Atayero, A. A. (2018) A Framework for a Smart Campus: A Case of Covenant University. In: International Conference on Computational Science and Computational Intelligence (CSCI), IEEE.

John, Temitope M. and Ucheaga, E. G. and Olowo, Olalekan and Badejo, J. A. and Atayero, A. A. (2016) Towards building smart energy systems in sub-Saharan Africa: A conceptual analytics of electric power consumption. In: 2016 Future Technologies Conference (FTC), 6-7 Dec. 2016, San Francisco, CA, USA.

John, Temitope M. and Ucheaga, E. G. and Orovwode, H. E. and Wara, S.T. (2017) Finance Models for Rural Electrification from Renewable Energy Schemes. In: 11th International Renewable Energy Storage Conference, March 2017, Dusseldorf, Germany.

Joseph, O. O and Banjo, SolomonO. and Afolalu, Sunday A. and Babaremu, Kunle (2022) Global and economic effects of corrosion -An overview. In: AIP Conference Proceedings.

Joseph, O. O and Fayomi, O. S. I and Adenigba, O.A (2017) Effect of lecaniodiscus cupaniodes extract in corrosion inhibition of normalized and annealed mild steels in 0.5 M HCl. In: International Conference on Technologies and Materials for Rene wable Energy, Environment and Sustainability, TMREES1, 21-24 April, Beirut Lebanon.

Joseph, O. O and Ishola, Felix and Afolalu, Sunday A. and Banjo, SolomonO. and Busari, A. A. and Asagba, C.O. and Inegbenebor, A.O. (2020) Effect of Chloride in The Electrochemical Degradation of Carbon Steel in E40 Fuel Ethanol Applications. In: IOP Conference Series: Materials Science and Engineering.

Joseph, O. O and Loto, C. A. and Joseph, O. O and Dirisu, J. O. (2018) Comparative Assessment of the Degradation Behaviour of API 5l X65 And Micro-Alloyed Steels in E20 Simulated Fuel Ethanol Environment. In: Technologies and Materials for Renewable Energy, Environment and Sustainability,.

Joseph, O. O and Loto, C. A. and Sivaprasad, S. and Ajayi, J.A. and Fayomi, O. S. I Comparative Assessment of the Degradation Mechanism of Micro-alloyed steel in E20 and E80 Simulated Fuel Grade Ethanol Environments. In: AIP Conference Proceedings.

Joseph, O. O and Sivaprasad, S. and Fayomi, O. S. I (2017) Comparative study on the effect of NaNO2 in corrosion inhibition of micro-alloyed and API-5L X65 steels in E20 simulated FGE. In: International Conference on Technologies and Materials for Rene wable Energy, Environment and Sustainability, TMREES1, 21-24 April, Beirut Lebanon.

Joseph-Igbor, Bridget and Orodu, O. D. and Afolabi, Richard Oyekunle (2016) Evaluating the Oil Mobilization Properties of Nanoparticles Treated with Arabic Gum and Xanthan Gum for Trapped Oil in Porous Media. In: SPE Nigeria Annual International Conference and Exhibition, 2-4 August 2016, Lagos, Nigeria.

Joshua, Opeyemi and Olusola, K. O and Fagbenle, Olabosipo I. and Olawuyi, B. J and Adebayo, Lameed and Ogunde, Ayodeji and Afolabi, A.O. and Olorunsola, Segun M. (2018) Pulverized Calcined Clay and Carbide Waste as Alternative Binder in Concrete and Mortar Applications for Sustainable Construction. In: Construction Research Congress.

Joshua, T.O and Fayomi, O. S. I and Olatuja, F.H and Inegbenebor, A.O. (2019) hardness and microstructural behavior of normalized steel welded joint under varying temperature. In: International Conference on Sustainable Materials Processing and Manufacturing,.

Kanyane, L.R and Fayomi, O. S. I and Popoola, A. P. I. and Monyai, T. (2017) Experimental Study of the interaction of solanum Tuberosum Fluid as Additive in Eletrodeposition Bath in the presence of Zn-Ti02 on mild steel. In: International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2017, 23-25 January 2017, Kruger National Park.

Katende, James (2009) ICT APPLICATIONS IN ENERGY MANAGEMENT. In: International Conference/Workshop on Renewable Energy and Climate change mitigation, 13th - 17th July, 2009, Covenant University. (Submitted)

Kilanko, O. O and Leramo, R.O. and Fayomi, O. S. I and Oyedepo, Sunday Olayinka and Babalola, P.O. and Ilori, T. A and Mozea, K.P. and Patrick, P.N. (2020) Design and construction of a manual food grinder. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Kilanko, O. O and Ojolo, S.J and Inegbenebor, A.O. and Ilori, T. A and Leramo, R.O. and Babalola, P.O. and Onwordi, Patrick Nwanne (2018) Effect of Pre-Shelling Treatment on Physical and Mechanical Properties of Cashew Nut. In: IOP Conf. Series: Materials Science and Engineering.

Laryea, Samuel and Ibem, Eziyi O. (2014) Barriers and prospects of e-Procurement in the South African construction industry. In: 7th Annual Quantity S urveying Research Conference, 22-23 September, 2014, Pretoria, South Africa.

Loto, C. A. and Joseph, O. O and Loto, R. T. and Okeniyi, Joshua Olusegun Adsorption and Inhibitive Properties of Camellia Sinensis for Mild Steel in 0.5M HCl and 0.8M H2SO4. In: NACE International, Conference.

Loto, C. A. and Loto, R. T. (2019) Effects of Lavandula and Ricinus Ϲommunis Oil as Inhibitors of Mild Steel Ϲorrosion in HCL and H2SO4. In: International Conference on Sustainable Materials Processing and Manufacturing.

Loto, R. T. (2022) Data and statistical analysis on the corrosion inhibition effect of four organic chemical compounds on carbon steel in dilute H2SO4 and HCl solutions. In: AIP Conference.

Loto, R. T. and Busari, A. A. (2023) Inhibition effect of cow bone soot on low carbon steel corrosion in artificial concrete pore environment. In: Journal of Physics: Conference Series.

Loto, R. T. and Loto, C. A. (2022) Data and statistical interpretation of the corrosion inhibition of n,n dimethylaminoethanol, aminobenzene and 2-amino-5-ethyl-1,3,4-thiadiazole compound. In: AIP Conference Proceedings.

Loto, R. T. and Loto, C. A. and Ayozie, Bryan and Sanni, T.F. (2018) Anti-corrosion Properties of Rosemary Oil and Vanillin on Low Carbon Steel in Dilute Acid Solutions. In: 147th Annual Meeting & Exhibition.

Loto, R. T. and Loto, C. A. and McPepple, Alexander and Olanrewaju, Gabriel and Olaitan, Akanji Lukman (2018) Synergistic Effect of Benzonitrile and Benzothiazole on the Corrosion Inhibition of 316 Stainless Steel in 6M HCl Solution. In: 147th Annual Meeting & Exhibition.

Loto, R. T. and Loto, C. A. and Okeniyi, Joshua Olusegun and Olanrewaju, Gabriel (2022) Statistical analysis of the corrosion inhibition performance of three inorganic compounds on mild steel acid media. In: International Conference on Materials Science and Engineering.

Loto, R. T. and Loto, C. A. and Popoola, A. P. I. (2014) Inhibition effect of Phenylamine on the Corrosion of Austenitic Stainless Steel (Type 304) in dilute sulphuric acid. In: Materials Science and Technology (MS&T) 2014, October 12-16, 2014, Pittsburgh, Pennsylvania, USA.

Loto, R. T. and Nnaji, S. (2022) Data and statistical evaluation of the protection effect of essential oil extracts on plain carbon steel in dilute acid media. In: The 7th International Conference on Chemical Materials and Process.

Luka, M. K. and Atayero, A. A. and Oshin, Oluwadamilola (2016) Call Admission Control Techniques for 3GPP LTE: A Survey. In: SAI Computing Conference (SAI).

Machethe, K.E and Popoola, A. P. I. and Adebiyi, D.I and Fayomi, O. S. I (2017) Influence of Sic-Ti/Al on the microstructural and Mechanical Properties of Deposited Ti-6V-4Al Alloy with cold Spray Technique. In: International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2017, 23-25 January 2017, Kruger National Park.

Matthews, V. O. and Ajala, A.O. and Popoola, Segun I. and Atayero, A. A. (2017) Smart Vehicular Traffic Management System using RFID Technology. In: World Congress on Engineering, July 5-7, 2017, London, U.K..

Matthews, V. O. and Atayero, A. A. and Popoola, Segun I. (2016) Development of a Solar Photovoltaic Vulcanizing Machine towards Extreme Poverty Eradication in Africa. In: World Congress on Engineering and Computer Science, October 19-21, 2016, San Francisco, USA.

Monyai, T. and Fayomi, O. S. I and Popoola, A. P. I. (2017) Influence on Transitional Rare Earth Metal Composite on The Tenary Based Sulphate Rich Coatings. In: International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2017, 23-25 January 2017, Kruger National Park.

Mosobalaje, O. O. and Ajia, M V and Orodu, O. D. and Ogbe, D O (2019) Ergodic and non-ergodic variogram uncertainty in Agbabu bitumen field porosity data. In: International Conference on Sustainable Infrastructural Development.

Mosobalaje, O. O. and Orodu, O. D. and Ogbe, D O (2019) Reservoir Characterization, variogram estimate, machine learning, Upstream Oil & Gas, agbabu field porosity data, variogram cloud plot, porosity data, estimation, variogram model, variogram. In: SPE Nigeria Annual International Conference and Exhibition, Lagos, Nigeria.

Mosobalaje, O. O. and Orodu, O. D. and Ogbe, David O. (2019) Reservoir Characterization, variogram estimate, machine learning, Upstream Oil & Gas, agbabu field porosity data, variogram cloud plot, porosity data, estimation, variogram model, variogram. In: SPE Nigeria Annual International Conference and Exhibition, August 2019., Lagos, Nigeria,. (In Press)

Nchuchuwe, F. F. and Ojo, D. A. (2017) E-GOVERNANCE, REVENUE GENERATION AND PUBLIC SERVICE DELIVERY IN NIGERIA: AN OVERVIEW OF THE E- TAXATION SYSTEM IN LAGOS STATE. In: CUCEN 2017, Covenant University, Ota.

Nduma, R.C. and Fayomi, O. S. I and David, O. D. and Joseph, O. O and Udoye, Nduka Ekene and Oyebanji, J.A. and Sojobi, J. W. and Daramola, D.O. and Ogunsanya, A O (2022) The simplicity of electrochemical degradation of materials and its susceptibility. In: AIP Conference Proceedings. (Submitted)

Nduma, R.C. and Fayomi, O. S. I and Nkiko, Mojisola O. and Inegbenebor, A.O. and Udoye, Nduka Ekene and Onyisi, Ozuor and Sanni, O. and Fayomi, J. (2020) Review of metal protection techniques and application of drugs as corrosion inhibitors on metals. In: International Conference on Engineering for Sustainable World.

Ngene, Ben U. and Nwafor, C. O. and Bamigboye, Gideon and Ogbiye, S. A. and Ogundare, J. O. and Akpan, V. E. (2019) Integrated water resources management in Nigeria: Implications for sustainable national development. In: International Conference on Sustainable Infrastructural Development.

Ngene, Ben U. and Obianigwe, N. (2018) Nigerian Rain Gauge Station Optimization and National Development: The importance of Head Count. In: IOP Conference Series: Materials Science and Engineering.

Ngene, Ben U. and Quadri, A. and Bamigboye, Gideon (2018) NIGERIAN EDUCATIONAL SYSTEM: IN THE PURSUIT OF RIGHT PHYSICAL ENVIRONMENT FOR LEARNING. In: EDULEARN18 Conference, 2nd-4th July 2018, Palma, Mallorca, Spain.

Ngene, Ben U. and Quadri, A. and Tenebe, I.T. and Bamigboye, Gideon (2018) ASSESSMENT OF STUDENTS’ CLASSROOM LEARNING OUTCOME: INFLUENCE OF ENVIRONMENTAL FACTORS. In: EDULEARN18 Conference, 2nd-4th July 2018,, Palma, Mallorca, Spain.

Nkordeh, Nsikan and Idachaba, F.E. and Oni, O.O. (2015) Microstrip Patch Antenna: Comparing Performance of a Rectangular and a Circular Patch at LTE Bluetooth and GSM Frequencies. In: World Congress on Engineering, July 1 - 3, 2015, London, U.K..

Nnaeto, J. O. (2017) Application of Emerging Technologies to Enhance Public Service Delivery: The Place of Nigerian Public Service. In: CUCEN 2017, Covenant University, Ota.

Noma-Osaghae, Etinosa and Okokpujie, Kennedy O. and Okereke , Chinonso and Okonigene, Robert E. and Okesola, J. O. (2017) Design and Implementation of an Iris Biometric Door Access Control System. In: 2017 International Conference on Computational Science and Computational Intelligence, 14-16 December 2017, Las Vegas, USA.

Notcker, Joachim and Adetiba, E. and Abayomi, Abdultaofeek and Oshin, Oluwadamilola and Greyson, Kenedy Aliila and Ifijeh, H. A. and Babatunde, Alao (2022) Interference Detection Among Secondary Users Deployed in Television Whitespace. In: International Conference on Intelligent Systems Design and Applications, 2023, Online.

Notcker, Joachim and Adetiba, E. and Abayomi, Abdultaofeek and Ronoh, Kennedy K. and Oshin, Oluwadamilola and Greyson, Kenedy Aliila (2023) Interference Mitigation Using Particle Swarm Optimization Algorithm in Television White Space. In: 2023 International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB-SDG), 05-07 April 2023, Omu-Aran, Nigeria.

Nwanji, E. C and Babalola, P.O. (2018) Synthesizing a Metal Matrix Composite (Al- Al2O3) from Aluminium (AA1237) Reinforced with Alumina (Al2O3) Particulates. In: IOP Conf. Series: Materials Science and Engineering.

ODUSOTE, BABAFEMI and Akinola, T. (2017) DESIGN AND IMPLEMENTATION OF AN E-DELIBERATION SYSTEM A CASE STUDY OF NIGERIA’S FEDERAL MINISTRY OF POWER, WORKS AND HOUSING. In: CUCEN 2017, Covenant University, Ota.

OLAOLUWAYINKA, O. and Inegbenebor, A.O. and Fayomi, O. S. I and Udoye, Nduka Ekene and Babalola, P.O. (2020) Development of Heat sink from Aluminium Silicon Carbide for Electrical and Electronic Applications. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Obaju, B.N and Fagbenle, Olabosipo I. and Amusan, L. M. (2021) Building production management competencies for building students: academia and construction industry perspectives. In: International Conference on Science and Sustainable Development.

Obaju, B.N and Fagbenle, Olabosipo I. and Amusan, L. M. (2022) Building production management competencies for building students: academia and construction industry perspectives. In: International Conference on Science and Sustainable Development.

Obianigwe, N. and Ngene, Ben U. (2018) Soil Stabilization for Road Construction: Comparative Analysis of a Three-Prong Approach. In: IOP Conference Series: Materials Science and Engineering.

Odun-Ayo, Isaac and Ajayi, Olasupo and Misra, Sanjay (2018) Cloud Computing Security: Issues and Developments. In: World Congress on Engineering, July 4-6, 2018, London, U.K..

Odun-Ayo, Isaac and Okereke, Chinonso and Orovwode, H. E. (2018) Cloud Computing and Internet of Things: Issues and Developments. In: World Congress on Engineering, London, U.K., World Congress on Engineering.

Odun-Ayo, Isaac and Okereke, Chinonso and Orovwode, H. E. (2018) Cloud and Application Programming Interface – Issues and Developments. In: World Congress on Engineering, London, U.K., July 4-6, 2018.

Ogali, Oscar I. and Orodu, O. D. (2020) Flow Barrier Detection and Characterisation using Capacitance- Resistance Model: Case Study of a Far East Oil Field. In: Nigeria Annual International Conference and Exhibition, August 11–13, 2020, Online.

Ogbiye, S. A. and Fagbenle, E. and Busari, A. A. and Onakunle, M and Omole, D. O. (2021) Rain water harvesting: a sustainable alternative for domestic water supply in South –Western Nigeria: in the case study of Ado-Odo/Ota LGA Ogun State. In: ICSID 2020, 2021, Online.

Ogunde, Ayodeji and Fagbenle, Olabosipo I. (2013) Assessment of Effectiveness of Planning Techniques and Tools on Construction Projects in Lagos State, Nigeria. In: Architectural Engineering Conference.

Ogunkunle, T.F. and Adeboje;, Isreal and Oni, Babalola Aisosa and Fadairo, Adesina Samson and Adeyemi, Gbadegesin Abiodun and Abraham, V. D. (2022) Preliminary Assessment of an Environmentally-Friendly Surfactant Synthesized from Elaeis Guineensis Palm Kernel oil for its Use in Enhanced Oil Recovery. In: SPE Nigeria Annual International Conference and Exhibition, August 1–3, 2022, Lagos, Nigeria.

Oguntosin, V. and ORUMA, SAMSON OGHENEOVO and Akindele, Ayoola and Abdulkareem, Ademola (2021) Control Design of an Inverted Pendulum on a Moving Base Using State Feedback. In: International Conference on Engineering for Sustainable World, 2021, Online.

Ohijeagbon, O. D. and Ajayi, O. O. and Waheed, O. and Adekojo, M. and Salawu, Enesi Y. and Oyawale, Fetus A (2019) Design of Optimal Hybrid Renewable Energy System for Sustainable Power Supply to Isolated-grid Communities in North Central, Nigeria. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019.

Ojelabi, Rapheal A. and Fagbenle, Olabosipo I. and Afolabi, A.O. and Tunji-Olayeni, P .F and Amusan, L. M. (2018) Appraising the Barriers to Public-Private Partnership as a Tool for Sustainable Development of Infrastructures in a Developing Economy. In: IOP Conf. Series: Earth and Environmental Science.

Okedere, O. B. and Fakinle, B. S. and Elehinafe, F. Boluwaji and Jimoda, L. A. and Sonibare, Jacob (2013) EFFECTS 1 OF CONE INCLINATION AND HEIGHT ON CYCLONE PRESSURE DROP AND POWER REQUIREMENT. In: 2nd Intrenational Conference on Engineering and Technology Research, 26-28th March, 2013, Ladoke Akintola University of Technology, Ogbomoso, Oyo State, Nigeria.

Okeke, Austin Chukwueloka-Udechukwu and Wang, Fawu and Kuwada, Yohei and Mitani, Yasuhiro (2017) Experimental Study of the Premonitory Factors for Internal Erosion and Piping Failure of Landslide Dams. In: 4th world landslide forum, Solvenia.

Okeniyi, Elizabeth Toyin and Adagunodo, T. A. and Okeniyi, Joshua Olusegun (2021) Electrical resistivity application for road failure assessment at an industrial hub in Ogun State, Nigeria. In: International Conference on Science and Sustainable Development.

Okeniyi, J. O. (2015) Effect of Immersion Medium on the Compressive Strength of Steel-Reinforced Concretes. In: International Conference on African Development Issues (CU-ICADI) 2015: Materials Technology Track, African Leadership Development Centre, Covenant University Canaanland, Ota Ogun State, Nigeria.

Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, A. P. I. and Omotosho, Olugbenga Adeshola (2015) Performance of Rhizophora mangle L. leaf-extract and sodium dichromate synergies on steel reinforcement corrosion in 0.5 M H2SO4-immersed concrete. In: CORROSION 2015 CONFERENCE & EXPO.

Okeniyi, Joshua Olusegun and Nwadialo, Christopher Chukwuweike and Olu-Steven, Folusho Emmanuel and Ebinne, Samaru Smart and Coker, Taiwo Ebenezer and Okeniyi, Elizabeth Toyin and Ogbiye, Adebanji Samuel and Durotoye, Taiwo Omowunmi and Badmus, Emmanuel Omotunde Oluwasogo (2017) C3H7NO2S effect on concrete steel-rebar corrosion in 0.5 M H2SO4 simulating industrial/microbial environment. In: Technologies and Materials for Renewable Energy, Environment and Sustainability, 15–18 Nov 2016, Paris, France.

Okeniyi, Joshua Olusegun and Omotosho, Olugbenga Adeshola and Inyang, Michael Anietie and Okeniyi, Elizabeth Toyin and Nwaokorie, Ikechi Thaddeus and Adidi, Emmanuel Amanogho and Owoeye, Taiwo Felicia and Nwakudu, Kelechukwu Chinedu and Akinlabu, Deborah Kehinde and Gabriel, Olanrewaju Oyewale and Taiwo, Olugbenga Samson and Awotoye, Olufisayo Adebola (2017) Investigating inhibition of microbes inducing microbiologically-influenced-corrosion by Tectona grandis based Fe-nanoparticle material. In: The International Conference on Technologies and Materials for Renewable Energy, Environment and Sustainability, TMREES16-Paris, 15–18 Nov 2016, Paris, France.

Okeniyi, Joshua Olusegun and Omotosho, Olugbenga Adeshola and Okeniyi, Elizabeth Toyin and Ogbiye, S. A. (2016) Anticorrosion Performance of Solanum Aethiopicum on Steel-Reinforcement in Concrete Immersed in Industrial/Microbial Simulating-Environment. In: TMS 2016 145th Annual Meeting & Exhibition, 2016.

Okewu, Emmanuel (2015) Enhancing Small and Medium Enterprises (SMEs) in Africa through Service Oriented Software Engineering (SOSE). In: 2nd Covenant University Conference on African Development Issues (CU-ICADI), 11th - 13th May, 2015, Africa Leadership Development Center, Covenant University, Ota, Nigeria..

Okokpujie, Imhade P. and Fayomi, O. S. I and Leramo, R.O. The Role of Research in Economic Development. In: IOP Conf. Series: Materials Science and Engineering.

Okokpujie, Kennedy O. and Noma-Osaghae, Etinosa and John, S. N. and Oputa , Rhema (2017) Development of a Facial Recognition System with Email Identification Message Relay Mechanism. In: International Conference of Computing Networking and Informatics (ICCNI), 2017, 29 - 31 Oct - 2017 , Covenant University,Ota, Nigeria.

Okokpujie, Kennedy O. and Noma-Osaghae, Etinosa and Kalu-Anyah , Grace and Okokpujie, Imhade P. (2017) A Face Recognition Attendance System with GSM Notification. In: 2017 IEEE 3rd International Conference on Electro-Technology for National Development (NIGERCON) , 7-10 Nov - 2017, Federal University of Technology, Owerri, Nigeria..

Okokpujie, Kennedy O. and Noma‐Osaghae, Etinosa and Okesola, Olatunji J. and Omoruyi, Osemwegie and Okereke, Chinonso and John, S. N. and Okokpujie, Imhade P. (2018) Integration of Iris Biometrics in Automated Teller Machines for Enhanced User Authentication. In: International Conference on Information Science and Applications, 24 July 2018, Online.

Okokpujie, Kennedy O. and Noma‐Osaghae, Etinosa and Okesola, Olatunji J. and Omoruyi, Osemwegie and Okereke, Chinonso and Okokpujie, Imhade P. (2018) Fingerprint Biometric Authentication Based Point of Sale Terminal. In: International Conference on Information Science and Applications, 24 July 2018, Online:.

Okoro, Emeka Emmanuel and Gareca, N. P. and Uranga, L. L. and Sanni, Samuel Eshorame and Emetere, Moses and Orodu, O. D. (2021) Synthesis of Nanosilica and its application as Water Based Mud Rheology Enhancer. In: International Conference on Engineering for Sustainable World, 2021, Online.

Okoro, Emeka Emmanuel and Okafor, Ikechukwu and Sanni, Samuel Eshorame and Obomanu, Tamunotonjo and Oguntade, Tomiwa and Orodu, O. D. (2020) Investigation of Reservoir Permeability Impairment When Drilling with Nano Treated Drill‐in Mud System. In: SPE Nigeria Annual International Conference and Exhibition, August 11–13, 2020, Online.

Okoro, Emeka Emmanuel and Sanni, Samuel Eshorame and Emetere, Moses and Orodu, O. D. (2019) Process Scheme for the Production of Liquid Fuel from used tires via Fast Pyrolysis. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing, 2019, Online.

Oladimeji, Temitayo E, and Sonibare, Jacob and Omoleye, James (2018) INVESTIGATION OF CO AND SO2 FROM ACID CLAY TREATMENT OF USED LUBRICATING OIL. In: International Conference on Engineering for Sustainable World, organized, 9th July to 13th July 2018, Covenant University Ota, Nigeria.

Oladimeji, Temitayo E, and Sonibare, Jacob and Omoleye, James (2018) Investigation of Co and So2 from Acid Clay Treatment of used Lubricating Oil. In: IOP Conf. Series: Materials Science and Engineering.

Oligbinde, O.S. and Odunfa, K. M. and Ohunakin, O.S. and Odunfa, V.O. (2014) Energy Efficiency In Residential Buildings: A Case Study Of 1004 Federal Housing Authority Estate, Victoria Island, Lagos. In: International Conference of Mechanical Engineering, Energy Technology and Management IMEETMCon 2014.

Olowoleni, J. O. and Awosope, C. O. A. and Adoghe, A. U. and Oguntosin, V. and Okupevi, E. S. (2021) Design and implementation of a single phase to three phase rotary converter. In: International Conference on Recent Trends in Applied Research, 2021, Online.

Olugbenga, Adeshola Omotosho and Okeniyi, Joshua Olusegun and Ajayi, O. O. and Ajanaku, K. O. and Loto, C. A. and Popoola, Abimbola Patricia Idowu (2014) Analyses of corrosion potential from inhibitor-admixed steel-reinforced concrete: Implication on steel-rebar corrosion risk/probability. In: Second International. Conference on Advances In Civil, Structural and Mechanical Engineering- CSM 2014, 16–17 November 2014, Birmingham, United Kingdom.

Olujube, A. A. and Simeon, M. and Amuta, Elizabeth and Aligbe, Alex and Uyi, Aiyudubie and Adoghe, A. U. (2021) BIPV Potentials in Overcoming Energy Challenges in Sub-Saharan Africa. In: International Conference on Engineering for Sustainable World, 2021, Online.

Olukanni, D. O. (2022) Anti-plagiarism and research ethics: Nigeria experience. In: AIP Conference.

Olukanni, D. O. and Adebiyi, A. S. (2012) Vehicular Pollution of Soil in Ota, Ogun State, Nigeria. In: Poster presentation at the 7th Covenant University Convocation and Exhibition, 2012, Covenant University, Canaan land Ota, Nigeria..

Olukanni, D. O. and Kokumo, Kola O. PERFORMANCE EVALUATION OF A CONSTRUCTED WETLAND SYSTEM IN NIGERIA. In: IWA Specialist Group on Wetland Systems for Water Pollution Control.

Olukanni, D. O. and Nwafor, C. O. and Ogundare, J. O. (2022) COVID-19: Impacts and implications on waste management, the Nigeria economy and the way forward. In: AIP Conference.

Oluwafemi, John and Ofuyatan, Olatokunbo M. and Oyebisi, S.O and Alayande, T and Abolarin, John (2018) Probabilistic Seismic Hazard Analysis of Nigeria: The Extent of Future Devastating Earthquake. In: OP Conf. Series: Materials Science and Engineering.

Oluwafemi, John and Olukanni, D. O. and Justin, L.D (2021) Improper waste disposal in Ota, Ogun State- a proposed waste segregation approach. In: International Conference on Recent Trends in Applied Research.

Oluwatayo, A. A. and Olademehin, Samuel O. and Adewakun, Adebambo and Pirisola, Heritage O. and Alagbe, O. A. and Aderonmu, P. A and Fulani, O. (2017) IMPACT OF THE ARCHITECTURAL DESIGN PROCESS ON STUDENTS PERFORMANCE IN DESIGN STUDIO PROJECTS. In: INTED2017 Conference, 6th-8th March 2017, Valencia, Spain.

Oluwatayo, A. A. and Opoko, Pearl Akunnaya and Ezema, I. C. and Iroham, C.O. (2016) How do Students Perceive their Employability Readiness: The Case of Architecture Students. In: 3rd International Conference On African Development Issues (CU-ICADI), May 9- May 11 2016, Covenant University, Ota, Nigeria.

Omole, D. O. and Chichezie, T.E. and Akpan, V. E. (2021) Determination of volume of wastewater generated in a university campus. In: 4th International Conference on Science and Sustainable Development (ICSSD 2020), 2020, Online.

Omole, D. O. and Chichezie, T.E. and Akpan, V. E. (2021) Determination of volume of wastewater generated in a university campus. In: International Conference on Science and Sustainable Developmen.

Omosanya, Abolaji Joseph and Akinlabi, Esther T. and Okeniyi, Joshua Olusegun (2019) Overview for improving steam turbine power generation efficiency. In: International Conference on Engineering for Sustainable World.

Omosanya, Abolaji Joseph and Akinlabi, Esther T. and Okeniyi, Joshua Olusegun (2021) Static Analysis of the Last Stage Low Pressure Steam Turbine Blade to Improve Blade twist Angle. In: Materials Science and Engineering.

Omotosho, Olugbenga Adeshola and Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, A. P. I. and Ajibola, Omokolade Bamidele and Ogbiye, S. A. (2017) Cassia fistula Leaf-Extract Effect on Corrosion-Inhibition of Stainless-Steel in 0.5 M HCl. In: 3rd Pan American Materials Congress, 2017.

Omotosho, Olugbenga Adeshola and Okeniyi, Joshua Olusegun and Loto, C. A. and Popoola, Abimbola Patricia Idowu and Fademi, Ekundayo Oluwademilade Jacob and Oladipupo, Segun Isaac and Alabi, Ayomide Samuel and Ajibola, Omokolade Bamidele and Emelieze, Alex Nwabunor (2017) C6H5NH2 effect on the corrosion inhibition of aluminium in 0.5 M HCl. In: iii. The International Conference on Technologies and Materials for Renewable Energy, Environment and Sustainability, TMREES16-Paris, 15–18 Nov 2016, Paris, France.

Onawumi, A.S. and Fayomi, O. S. I and Okolie, T. A. Sociis and Adio, Timilehin and Udoye, Nduka Ekene and Samuel, A.U. (2018) Determination of a spark ignition engine's performance parameters using response surface methodology. In: Technologies and Materials for Renewable Energy, Environment and Sustainability., 19–21 September 2018, Athens, Greece.

Ongbali, Samson O. and Akinyemi, A. A. and Afolalu, Sunday A. and Leramo, R.O. and Ombugadu, M. G. (2021) Sustainability of Infrastructural Projects in Nigeria: A Critical Review. In: International Conference on Engineering for Sustainable World, 2021, Online.

Ongbali, Samson O. and Igboanugo, A. C. and Afolalu, Sunday A. and Udo, Mfon .O and Okokpujie, Imhade P. (2018) Model Selection Process in Time Series Analysis of Production System with Random Output. In: IOP Conf. Series: Materials Science and Engineering.

Oni, A. O. and Oloyede, S. A. and Durodola, O. D. and Oluwunmi, Adedamola O (2017) INCORPORATING OUTDOOR ADVERTISING BILLBOARD VALUATION INTO ESTATE MANAGEMENT CURRICULUM IN NIGERIAN UNIVERSITIES. In: EDULEARN17 Conference, 3rd-5th July 2017, Barcelona, Spain.

Oni, O.O. and Idachaba, F.E. (2017) Review of Selected Wireless System Path loss Prediction Models and its Adaptation to Indoor Propagation Environments. In: International MultiConference of Engineers and Computer Scientists, March 15 - 17, 2017, Hong Kong.

Oni, O.O. and Idachaba, F.E. and Oshin, Oluwadamilola and Nkordeh, Nsikan (2015) A Comparative Review of Improvements in Long Term Evolution. In: the World Congress on Engineering, July 1 - 3, 2015, London, U.K..

Oni, O.O. and Oshin, Oluwadamilola and Oni, Oluyinka and Idachaba, F.E. (2015) Web-based Portal for Vehicle Licensing Management. In: World Congress on Engineering, July 1 - 3, 2015, London, U.K..

Onuh, C.Y and Adewale, Dosunmu and Anawe, Paul Apeye Lucky and Rotimi, Oluwatosin J. (2020) The Chemical Modification of Calophyllum Inophyllum Plant Oil for Potential Base Oil in Drilling Mud Operation. In: SPE Nigeria Annual International Conference and Exhibition, August 11–13, 2020, Online.

Orhevba, Amanda O. and Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Leramo, R.O. and Dirisu, J. O. and Afolalu, Sunday A. (2022) Rinser Machine and the Dynamics-based Failure Analysis for Spur Gear Fault Detection: A Forensic Review. In: International Conference on Energy and Sustainable Environment.

Oriyomi, Moses Oluwayimika and Babalola, P.O. (2020) Development of Adult Mosquito Fanless Trap. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Orovwode, H. E. and Afolabi, Gbenga and Agbetuyi, Felix and Adoghe, A. U. and Adeyemi-Kayode, Temitope M. and Amuta, Elizabeth (2022) Development and Performance Evaluation of a Solar Powered Tomatoes Storage Chamber. In: 3rd International Conference on Energy and Sustainable Environment, 2022, Online.

Osawaru, FAITH and Amusan, L. M. and Awotinde, Oladipupo Sunday and Akanya, Cinwosoko Ninma and ASIYANBOLA, OLATOMIDE DAVID and Akinbo, Faith (2018) Planning materials supply for construction works. In: International Conference on Science and Sustainable Development.

Oshin, Oluwadamilola and Atayero, A. A. (2015) 3GPP LTE: An Overview. In: World Congress on Engineering, July I - 3, 2015, London, U.K..

Oshin, Oluwadamilola and Okhanigbe, Sebastian and Oni, O.O. and Idachaba, F.E. (2017) Development Of a Wearable for Remote Health Monitoring in Infants. In: World Congress on Engineering and Computer Science, October 25-27, 2017, San Francisco, USA.

Oshin, Oluwadamilola and Owoniyi, Adedoyin and Oni, O.O. and Idachaba, F.E. (2017) Programming Of NFC Chips: A university System Case Study. In: World Congress on Engineering and Computer Science, October 25-27, 2017, San Francisco, USA.

Oshionebo, E. E. and Fatoke, A. S. (2017) TERTIARY LEVEL E-GOVERNANCE AND STUDENTS’ EMPOWERMENT FOR FUTURE LEADERSHIP ROLE PERFORMANCE: A CASE STUDY OF UNIVERSITY OF LAGOS. In: CUCEN 2017, Covenant University, Ota.

Owodolu, A.A. and Bolu, Christian and Abioye, Abiodun A. and Efemwenkiekie, K. U. (2018) Development of a System for Counting of People Using MultiCamera and Sensors. In: IOP Conf. Series: Materials Science and Engineering, 2018.

Oyebisi, S.O and Akinmusuru, J. O. and Ede, A. N. and Ofuyatan, Olatokunbo M. and Mark, Grace and Oluwafemi, John (2018) 14 Molar Concentrations of Alkali-Activated Geopolymer Concrete. In: IOP Conf. Series: Materials Science and Engineerin.

Oyebisi, S.O and Ede, A. N. and Ofuyatan, Olatokunbo M. and Alayande, T and Mark, Grace and Jolayemi, Joshua and Ayegbo, Stephen (2018) Effects of 12 Molar Concentration of Sodium Hydroxide on the Compressive Strength of Geopolymer Concrete. In: IOP Conf. Series: Materials Science and Engineering.

Oyebisi, S.O and Ede, A. N. and Olutoge, F. A. and Igba, T. and Ramonu, J. (2019) Rheology of slag-based geopolymer concrete using corncob ash as a pozzolanic material. In: 1st International Conference on Sustainable Infrastructural Development, 2019, Online.

Oyedepo, Sunday Olayinka and Oyebanji, J.A. and Ukponu, S. N. and Kilanko, O. O and Babalola, P.O. and Fayomi, O. S. I and Dirisu, Joy Favour and Olawole, C. Olukunle and Leramo, R.O. and Dunmade, I.S. and Efemwenkiekie, K. U. and Shopeju, O. O. (2020) Generation of Typical Meteorological Year Data for a City in South-Western Nigeria. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Oyewole, S.A. and Olugbara, O. O. and Adetiba, E. and Nepal, T. (2015) Classification of Product Images in Different Color Models with Customized Kernel for Support Vector Machine. In: Third International Conference on Artificial Intelligence, Modelling and Simulation.

Phala, M.F and Popoola, A. P. I. and Fayomi, O. S. I (2017) Corrosion and Properties of Developed Ni-CeO2 Co-deposited on Mild Steel at Varying Current Desities. In: International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2017, 23-25 January 2017, Kruger National Park.

Popoola, Segun I. and Badejo, J. A. and iyekekpolo, Ujioghosa B. and Ojewande, Samuel O. and Atayero, A. A. (2017) Statistical Evaluation of Quality of Service Offered by GSM Network Operators in Nigeria. In: WCECS 2017.

Popoola, Segun I. and Popoola, Oluwafunso A. and Oluwaranti, A.I. and Badejo, J. A. and Atayero, A. A. (2017) A Framework for Electronic Toll Collection in Smart and Connected Communities. In: Proceedings of the World Congress on Engineering and Computer Science 2017 Vol II , October 25 - 27, 2017, San Francisco USA.

Popoola, Segun I. and iyekekpolo, Ujioghosa B. and Ojewande, Samuel O. and Sweetwilliams, Faith O. and John, S. N. and Atayero, A. A. (2017) Ransomware: Current Trend, Challenges, and Research Directions. In: Proceedings of the World Congress on Engineering and Computer Science 2017 Vol II , October 25 - 27, 2017, San Francisco USA.

Rahim, A. G. and Akintunde, O. and Omotoyinbo, Charles A. and Obanla, O. R. and Aremu, N. S. (2017) Transformative Potentials of E-governance: The intrinsic role of Information and Communication Technology in Reinvigorating Public Service Delivery in Nigeria. In: CUCEN 2017, Covenant University, Ota.

Rotimi, Oluwatosin and Chukwuka, Somto and Oyeyemi, Kehinde D. and Ogunkunle, Temitope and Akande, Ayodeji and Ihekona, Betty and Iyamah, Oseremen and Alege, Tope (2022) Reconstructing Deposition Environment Using Energy Regime Assessment of Stacked Sequences from Gamma Ray Log and 3D Seismic Data. In: SPE Nigeria Annual International Conference and Exhibition, Lagos, Nigeria,.

Rotimi, Oluwatosin J. and Zhenli, Wang and Liang, Yao and Onuh, C.Y and Ogunkunle, Temitope and Oyeyemi, Kehinde D. (2020) Rock Compaction Fault Displacement Evidence from Analysis of Sub-Parallel Subsurface Strata. In: SPE Nigeria Annual International Conference and Exhibition, August 11–13, 2020, Online.

SALISU, KAKA (2015) E-Government Adoption And Framework For Big Data Analytics In. In: Second Covenant University Conferenced on e-Governance in Nigeria (CUCEN 2015), June 10-12, 2015, Covenant University Canaanland, Ota Ogun State, Nigeria.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Afolalu, Sunday A. (2019) Constitutive Model to Analyse the effect of Variation in Temperature Distribution on the Rate of Heat Transfer around a Spur Gear Tooth. In: International Conference on Sustainable Materials Processing and Manufacturing. (In Press)

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, S. (2020) Material Selection and Processing Techniques: Crucial Factors for Gear Engineering. In: International Conference on Engineering for Sustainable World.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Stephen A. and Afolalu, Sunday A. and Edun, B.M (2021) Dynamic Simulation of Gear System Based on 2D Space Multibody Physics: A Sustainable Gear Design Approach. In: International Conference on Engineering for Sustainable World.

Salawu, Enesi Y. and Ajayi, O. O. and Inegbenebor, A.O. and Popoola, A. P. I. and Uyor, U. O. (2019) Effects of Heat Treatment Techniques on the Fatigue Behaviour of Steel Gears: A Review. In: International Conference on Engineering for Sustainable World, 2019, Online.

Salawu, Enesi Y. and Oghenevwegba, Emuowhochere and Ajayi, O. O. and Inegbenebor, A.O. and Akinlabi, Esther T. and Akinlabi, S.T (2019) Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach. In: 148th Annual Meeting & Exhibition Supplemental .

Samuel, I. A. and Katende, J. and Ibikunle, F. Voltage Collapse and the Nigerian National Grid. In: EIE’s 2nd International Conference on Computing, Energy, Networking, Robotics and Telecommunications (eieCon2012), Covenant University, Ota, Nigeria.

Sani, Yahaya Muhammad and Alaba, Peter Adeniyi and Aziz, A.R.Abdul and Daud, Wan Mohd Wan (2014) Effect of Preparation Method in Activating Active Sites and Catalytic Activity of SO42-/Zro2 in Biodiesel Production. In: Proceeding the Regional Conference on Chemical Engineering, December 2-3, 2014, Yogyakarta.

Sanni, Samuel Eshorame and Odigure, Joseph. O. and Agboola, Oluranti and Emetere, Moses and Okoro, Emeka Emmanuel and Aderinsola, O (2020) Influx potential and sequestration of CO2 in Cement based material towards establishing a proactive measure for combatting structural deformations. In: IOP Conf. Series: Materials Science and Engineering.

Seteyeobot, Ifeanyi and Uma, Joshua A. and Enaworu, E. (2017) Experimental Study of the Possible use of Locally Derived Plantain Peelings and Rice Husk as Additives for Oil Based Mud at High Temperature - High Pressure Conditions. In: Nigeria Annual International Conference and Exhibition, 31 July - 2 2017, Lagos, Nigeria .

Sholanke, Anthony Babatunde and Adeboye, A. B. and Oluwatayo, A. A. and Alagbe, O. A. (2016) Evaluation of Universal Design Compliance at the Main Entrance of Selected Public Buildings in Covenant University, Ota, Ogun State, Nigeria. In: 3rd International Conference On African Development Issues (CU-ICADI), May 9- May 11 2016, Covenant University, Ota, Nigeria.

Somefun, Tobilola Emmanuel and Awosope, C. O. A. and Abdulkareem, Ademola and Ogelenya, J. and Orimogunje, Abidemi and somefun, C.T. (2020) Design of a digital fuel gauge with distance-to-zero indicator. In: ICSID.

Sowunmi, A. and Efeovbokhan, Vincent Enon and Orodu, O. D. and Azeta, O. (2021) Rheological characteristics of metal oxide nanocomposite and its application in enhanced oil recovery. In: IOP Conf. Series: Materials Science and Engineering, 2020, Online.

Sowunmi, A. and Efeovbokhan, Vincent Enon and Orodu, O. D. and Ojo, T. (2021) Comparative study on the effects of guar gum nanocomposite and guar gum polymer solutions on enhanced oil recovery. In: IOP Conf. Series: Materials Science and Engineering, 2021, Online.

Takpor, Temitope and Atayero, A. A. (2015) Integrating Internet of Things and EHealth Solutions for Students’ Healthcare. In: World Congress on Engineering.

Takpor, Temitope and Atayero, A. A. (2015) Integrating Internet of Things and EHealth Solutions for Students’ Healthcare. In: World Congress on Engineering and Computer Science, July 1 - 3, 2015, London, U.K..

Tenebe, I.T. and Emenike, PraiseGod C and Omole, D. O. and Busari, A. A. and Oniemayin, Babatunde I. (2016) TUTORING: THE PLACE OF PERSONALITY AND GENDER. In: 10th Annual International Tecnology, Education and Development Conference, 7th-9th March 2016, Valencia, Spain.

Tumba, Masi and Ofuyatan, Olatokunbo M. and Uwadiale, Osefunaimhen and Oluwafemi, John (2018) Effect of Sulphate and Acid on Self-Compacting Concrete Containing Corn Cob Ash. In: ICESW IOP Publishing IOP Conf. Series: Materials Science and Engineering.

Tumba, Masi and Ofuyatan, Olatokunbo M. and Uwadiale, Osefunaimhen and Oluwafemi, John and Oyebisi, S.O (2018) Effect of sulphate and acid on self-compacting concrete containing corn cob ash. In: IOP Conf. Series: Materials Science and Engineering.

Tunji-Olayeni, P .F and Amusan, L. M. and Omuh, I. O. and Afolabi, A.O. and Ojelabi, Rapheal A. Learning Difficulties In Building Measurement. In: INTED2016 Conference, 7th-9th March 2016, Valencia, Spain.

Tunji-Olayeni, P .F and KAJIMO – SHAKANTU, K. and Ayodele, Olaniyi Trust and EMMANUELA, K.Z (2021) Factors Affecting Students’ Learning in Civil Engineering Measurement. In: Built Environment Conference.

Tunji-Olayeni, P .F and KAJIMO-SHAKANTU, K and ONI, A.A (2021) Work-Life Experiences of Women in the Construction Industry: A Case of Women in Lagos Mainland, Nigeria. In: Built Environment Conference.

Tunji-Olayeni, P .F and Mosaku, T. O. and Fagbenle, Olabosipo I. and Amusan, L. M. and Omuh, I. O. and Joshua, Opeyemi (2014) Evaluating Construction Project Performance: A Case of Construction SMEs in Lagos,Nigeria. In: International Business Information Management Association, USA, Hempstead, New York 11549 USA.

Tunji-Olayeni, P .F and Mosaku, T. O. and Oyeyipo, Opeyemi and Afolabi, A.O. (2018) Sustainability strategies in the construction industry: implications on Green Growth in Nigeria. In: IOP Conf. Series: Earth and Environmental Science.

Tunji-Olayeni, P .F and Oyeyipo, Opeyemi and Nnadi, E.E (2019) Prospects of Quantity Surveyors in a dynamic world of climate change, digitalization and economic recession. In: International Conference on Sustainable Infrastructural Development.

UJARA, Ese and IFALOYE, O. R and Ekong, I. D. (2017) ELECTRONIC SURVEILLANCE AND COUNTER-TERRORISM: PROSPECTS FOR THE NIGERIAN STATE. In: CUCEN 2017, Covenant University, Ota.

Udo, Mfon .O and Esezobor, D. E. and Afolalu, Sunday A. and Onovo, Harrison and Ongbali, Samson O. and Okokpujie, Imhade P. (2018) Investigation of Balling Characteristics of Mixture of Iron Oxide Bearing Wastes and Iron Ore Concentrates. In: IOP Conf. Series: Materials Science and Engineering.

Udoye, Nduka Ekene and Fayomi, O. S. I and Inegbenebor, A.O. (2019) Assessment of Wear Resistance of Aluminium Alloy in Manufacturing Industry-A Review. In: International Conference on Sustainable Materials Processing and Manufacturing,.

Udoye, Nduka Ekene and Fayomi, O. S. I and Inegbenebor, A.O. (2021) A review on the mechanical strength of aluminium - clay composites. In: ICSID 2020, 2021, Online.

Udoye, Nduka Ekene and Nnamba, O. J. and Fayomi, O. S. I and Inegbenebor, A.O. (2021) Corrosion Performance of AA6061/Rice Husk Ash Composite for Engineering Application. In: International Conference on Engineering for Sustainable World, 2019, Online.

Ugwu, S. C. and Inegbenebor, A.O. and Fayomi, O. S. I and Udoye, Nduka Ekene (2021) Preparation of Carbon Brushes from Agro-Waste Materials Palm Kernels Shells for Automobile Industry. In: International Conference on Engineering for Sustainable World, Ota, Nigeria.

Wara, S.T. (2008) Building A Customer Driven Organization. In: NATIONAL WORKSHOP ON 'TOTAL QUALITY MANAGEMENT AND ORGANIZATONAL PERFORMANCE", 22ND. 24TH OCTOBER 2008., BENIN CITY, EDOSTATE.

Wara, S.T. (1996) The Electrical Engineer and The Community A Clarion Call For Sensitivity And LONG Term Investment. In: Seminar Nigerian Society of Engineers, 1 Engineering clos, VI Lagos.

Wara, S.T. (2012) Electricity Provision And Manageme1 In Nigeria: Challenges And Prospects. In: The International Colloquium On Thirty Years Of Social Services Provision And Management In Nigeria, 26 -28th March 2012.

Wara, S.T. (2004) Energy Theft and Illegal Connection - A Recipe To Solving Problems [theft & illegal Connections]. In: Seminar Nigerian Society of Engineers Benin Branch, Technical Paper Series, NSE Benin Secretariat Benin City, Edo State.

Wara, S.T. (2008) Engineering Inputs For The Attainment Of The Millennium Development Goals (MDGs) In Lesser Economies. In: 6th International Conference on The Role Of Engineers In Meeting Mllennium Develpment Goals In Lesser Economies, 10 - 12 December 2008, Arusha, Tanzania.

Wara, S.T. (2009) Global Energy Crisis, Vision 20--2020: Prospects And Challenges For Nigeria. In: 2009ANNUAL LUNCHEON/INDUCTION CEREMONY.

Wara, S.T. (2009) Installation, Testing And Maintenance Of Power Distribution Transformer. In: Seminar Nigerian Society of Engineers Benin Branch, Technical Paper Series, NSE Benin Secretariat Benin City, Edo State.

Wara, S.T. (2009) Maintenance Of Electrical Installations. In: Seminar Nigerian Society of Engineers Benin Branch, Technical Paper Series, NSE Benin Secretariat Benin City, Edo State.

Wara, S.T. (1992) The Operational Functions Of Radio Equipment Components. In: Workshop Lecture On wireless Communication.

Wara, S.T. (1999) Productivity Measurement In The Construction Industry. In: national productivity day symposium, April 7,1999, Benin City.

Wara, S.T. (1999) Stetegies For Effective Maintenance Management (Including Fundamentals Of AvailabilityV, Reliability & Maintainability). In: NATIONAL WORKSHOP ON "EFFECTIVE MAINTENANCE MANAGEMENT FOR IMPROVING PRODUCTIVITY, 5TH- 17TH JUNE 1999, .

Wara, S.T. and Abayomi-AIIi, A. (2008) Facility Maintenance And Management Information System (MIS). In: Proceedings Of The ConferenceOf Asset Management And Production Reliability, April 8-10, Brussels, Belgium.

Wara, S.T. and Abayomi-AIIi, A. (2008) Facility Maintenance And Management Information System (MIS). In: .Conference Facility Maintenance And Management Information System (MIS).

Wara, S.T. and Abayomi-AIIi, A. and Egbune, D.O. and Mirhewe, J. (2011) Combating C02 Emission And Global Warming Through Energy Effeicent Retrofitted Home Models. In: Proceedings Of The 19th International Conference On The Domestic Use Of Energy., Cape town south Africa.

Wara, S.T. and Abayomi-AIIi, A. and Mohamed, Afua K and Kahn, MTE (2008) Investigating Electricity Cost Savings in lgbinedion University Campuses. In: Industrial and Commercial Use of Energy Conference, 28-30 May 2008, Cape town south Africa.

Wara, S.T. and Egbune, D.O. and Mirhewe, J. (2009) Energy Efficient Retrofitted Home Models As Tools Of Demand Side Management. In: International Conference Towards Sustainable Energy Solutions For developng World, 15 -16 April 2009, Cape town south Africa.

Wara, S.T. and Hymore, F. K. (2004) Raw Material Development For Industrial Applications. In: Seminar Nigerian Society of Engineers Benin Branch, Technical Paper Series, NSE Benin Secretariat Benin City, Edo State.

Wara, S.T. and Ilaboya, I.R. and Hymore, F. K. (2007) Appropriate Technical Education, Entrepreneurship And Skill Training/Acquisition For Tanzania. In: 24th National Conference On The Role Of Engineering In Achieving The Natonal Strategy For Growth And Reducction Of Poverty, 6th - 7th December 2007, Dar es salaam, Tanzania.

Wara, S.T. and Ilaboya, I.R. and Hymore, F. K. and Njugbwen, E. (2007) Environmental Conservation And Disaster Management In Tanzania. In: 24th National Conference On The Role Of Engineering In Achieving The Natonal Strategy For Growth And Reducction Of Poverty, 6th - 7th December 2007, Dar es salaam, Tanzania.

Wara, S.T. and Ilaboya, I.R. and Hymore, F. K. and Njugbwen, E. (2007) Provision Of Affordable And Reliable Energy Data Bank. In: 24th National Conference On The Role Of Engineering In Achieving The Natonal Strategy For Growth And Reducction Of Poverty, 6th - 7th December 2007, Dar es salaam, Tanzania.

Wara, S.T. and Ilaboya, I.R. and Hymore, F. K. and Njugbwen, E. and Abayomi-AIIi, A. (2007) Exploiting ICT For Accelerated Development In Tanzania. In: 24th National Conference On The Role Of Engineering In Achieving The Natonal Strategy For Growth And Reducction Of Poverty, 6th - 7th December 2007, Dar es salaam, Tanzania.

Wara, S.T. and Ilaboya, I.R. and Mirhewe, J. (2009) Overview To Render Renewable Energy Sustainable In Africa. In: Domestic Use of Energy Conference.

Wara, S.T. and Nuga, O.O and Akinola, I.A. (2012) Economic Impact of the Use of Generators As A Main Power Source in the Domestic Sector: Challenges and Prospects for the Energy Road Map. In: Invited Technical paper, NSE Abeokuta, 12, April 2012, Abeokuta Ogun State.

Wei, Zhou and Tang, Zhonghua and Orodu, O. D. (2010) Case Study of the Impact of Cold and Hot Waterflooding Performance by Simulation and Experiment of High Pour Point Oil Reservoir,, Liaohe Oilfield, North-East China. In: SPE Oil and Gas India Conference and Exhibition, 20-22 January 2010, Mumbai, India.

Wogu, Ikedinachi Ayodele Power (2012) GOOGLE+: A BOOST TO E-LEARNING EDUCATION & TRAINING @ COVENANT UNIVERSITY. In: EIE’s 2nd International Conference on Computing, Energy, Networking, Robotics and Telecommunications (eieCon2012), Covenant University, Ota, Nigeria.

Wogu, Ikedinachi Ayodele Power and Misra, Sanjay and Assibong, Patrick Agbor and Apeh, H. A. and Olu-Owolabi, F. E and Awogu-Maduagwu, Edith Abisola (2018) Artificial Intelligence, Smart Class Rooms and Online Education in the 21st Century: Implications for Human Development. In: International Conference on Information Systems and Management Science, 22 – 23 February 2018, Misida, Malta.

Yinusa-Afolabi, Ayoola R. (2015) The Role ofiCT in National Development: A Study of the Educational Sector in Lagos State. In: International Conference on African Development Issues (CU-ICADI) 2015: Information and Communication Teclmology Track, African Leadership Development Centre, Covenant University Canaanland, Ota Ogun State, Nigeria.

Yussuf, N. M. and Embong, Z. and Abdullah, S. and Masirin, M. I. M. and Tajudin, S. A. A. and Ahmad, S. and Sahari, S K and Anuar, A. A. and Omeje, Maxwell (2018) The enhancement of heavy metal removal from polluted river water treatment by integrated carbon-aluminium electrodes using electrochemical method. In: IOP Conf. Series: Materials Science and Engineering 298, 2018.

Zhou, F. and Yao, G. and Wang, Guochang and Orodu, O. D. and Yang, QingJun (2016) Integrated Modeling of Fractured Low Permeability Reservoir, Shangonghe Formation, Baolang Oilfield, Northwest China. In: International Petroleum Technology Conference,, 3-5 December, 2008, Kuala Lumpur, Malaysia.

lnegbenebor, A. O. and Jones, R. D. and Ralph, Brian (1988) Deformation Characteristics and Work-hardening Behaviour of some High Strength Manganese Steels. In: Proceedings of the 8th International Conference on the Strength of Metals and Alloys, 22-26 August 1988, Tampere, Finland.

Book

Atayero, A. A. and Matthews, V. O. and Ayo, C. K., eds. (2007) International Conference and Workshop on Third Generation (3G) GSM & Mobile Computing: An Emerging Growth Engine for National Development. Department of Electrical and Information Engineering, Covenant University. ISBN 978-37963-2-1

John, S. N. and Ndujiuba, C. and Ibikunle, F. and Onaolapo, J. O., eds. (2012) Proceedings of EIE's 2nd International Conference on Computing, Energy, Networking, Robotics and Telecommunications. Covenant University, Nigeria. ISBN 978-37963-8-0

Adetiba, E. and Olugbara, O. O. and Taiwo, Tunmike B. (2016) Identification of Pathogenic Viruses Using Genomic Cepstral Coefficients with Radial Basis Function Neural Network. Springer International Publishing. ISBN 978-3-319-27399-0

Atayero, A. A. and Oleg, I. Sheluhin (2013) Integrated Models for Information Communication Systems and Networks: Design and Development. Information Science Reference.

Joseph, Rachael E. and Onuh, C.Y and Orodu, O. D. and Olabode, Oluwasanmi and Nchila, Yuven Thelma and Dinga, Christian N. (2022) Nigerian Marginal Oilfield Development Program: PIA and Current Issues. Green Energy and Technology . Springer Nature, Online, pp. 85-95.

Ngene, Ben U. Structures in a Changing Climate. LAMBERT Academic Publishing. ISBN 978-659-81049-7

Omeje, Maxwell and Wagiran, Husin (2016) Radiotoxicity Risk of Rocks and Groundwater of Abuja, Northcentral Nigeria. LAP LAMBERT Academic Publishing, Deutschland / Germany. ISBN 978-3-659-95532-7

Uzairue, Stanley Idiake (2016) Determination and Analysis of Signal/Path-Loss Exponent. LAMBERT ACADEMIC PUBLISHING.

Thesis

UNSPECIFIED UNSPECIFIED UNSPECIFIED thesis, UNSPECIFIED.

ABRAHAM, DAMILOLA VICTORIA and Covenant University, Theses (2021) SYNTHESIS AND EVALUATION OF SURFACTANTS FROM SELECTED VEGETABLE OILS FOR ENHANCED HEAVY- OIL RECOVERY. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, COVENANT UNIVERSITY.

ACADEME, SUNDAY OYAOGBODE and Covenant University, Theses (2021) HYDROGEOCHEMICAL ANALYSIS OF FLUORIDE IN DOMESTIC WELLS: AN EVALUATION OF WATER QUALITY AND PROBABILISTIC HUMAN HEALTH PROBLEM. Masters thesis, covenant university.

ADAMOLEKUN, AYODAMOPE MOFEBISARA and Covenant University, Theses Masters (2024) EXPLORING BIOMIMETIC ARCHITECTURAL PRINCIPLES IN THE DESIGN OF A PUBLIC LIBRARY IN MPAPE, ABUJA. Masters thesis, Covenant University.

ADEBESIN, Akeem Adekunle and Covenant University, Theses (2016) DEVELOPMENT AND PERFORMANCE EVALUATION OF A STREET SWEEPING MACHINE. Masters thesis, COVENANT UNIVERSITY.

ADEDOYIN, OLAYINKA ENITAN and Covenant University, Theses (2017) CHALLENGES OF BUILDING CONSTRUCTION AND MAINTENANCE ON RECLAIMED LAND (A case study of Lekki, Lagos State.). Masters thesis, COVENANT UNIVERSITY.

AFOLABI, ROTIMI and Covenant University, Theses (2022) ENHANCEMENT OF DATA CENTRE POWER CONSUMPTION THROUGH A PREDICTIVE ALGORITHM. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Covenant University.

AJAYI, CHRISTOPHER OLA and Covenant University, Theses (2017) DEVELOPMENT OF BLENDER-HAMMER MILL FOR MULTIPURPOSE USE. Other thesis, COVENANT UNIVERSITY.

AKINOLA, AKINYEMI ADEDEJI and Covenant University, Theses (2021) DEVELOPMENT OF A PLANTAIN DOUGH MACHINE FOR THE PREPARATION OF FRESH PLANTAIN PULPS. Masters thesis, COVENANT UNIVERSITY.

AKINOLA, GBEMISOLA AJOKE and Covenant University, Theses (2017) IMPACT OF PLANNING PROCESSES AND IMPLEMENTATION ON CONSTRUCTION PROJECT PERFORMANCE IN LAGOS STATE, NIGERIA. Masters thesis, COVENANT UNIVERSITY.

AKPANYUNG, KINGSLEY VICTOR and Covenant University, Theses (2019) MITIGATION OF AMMONIUM CHLORIDE CORROSION ON CARBON STEEL IN REFINING UNIT. Masters thesis, COVENANT UNIVERSITY.

ASIYANBOLA, OLATOMIDE DAVID and Covenant University, Theses (2018) CONSTRUCTION CRAFTSMEN’S AVAILABILITY AND PROJECT PERFORMANCE IN SELECTED SOUTHWESTERN STATES, NIGERIA. Masters thesis, COVENANT UNIVERSITY.

ATTAH, AMARACHI RITA and Covenant University, Theses (2021) VOLTAGE PROFILE AND POWER LOSSES ANALYSIS ON COVENANT UNIVERSITY MICROGRID WITH PHOTOVOLTAIC PENETRATION. Masters thesis, COVENANT UNIVERSITY.

AWODEYI, AFOLABI IFEDAYO and Covenant University, Theses (2018) DESIGN AND CONSTRUCTION OF AN AUTOMATED STREET LIGHTING SYSTEM. Other thesis, COVENANT UNIVERSITY.

AZETA, OSARHIEMHEN and Covenant University, Theses (2021) FUELS AND CHEMICALS FROM THE PYROLYSIS OF SCRAP TYRE: OPTIMISATION USING RESPONSE SURFACE METHODOLOGY AND ARTIFICIAL NEURAL NETWORK. Masters thesis, Covenant University.

Abioye, Oluwabunmi P. and Covenant University, Theses (2021) DEVELOPMENT OF NANOCRYSTALLINE COMPOSITE COATINGS FOR MARINE APPLICATION. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, COVENANT UNIVERSITY.

Adebayo, T. A. (2013) Implication of Future Carbon Dioxide Injection on Selected Niger-Delta Reservoir Rocks and Fluids. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Covenant University.

Aderonmu, P. A (2013) THE DESIGN STUDIO IN SELECTED SCHOOLS OF ARCHITECTURE IN SOUTH-WEST NIGERIA: A Study of Pedagogy, Culture and Environment. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Covenant University.

Akin-Adeniyi, Ayomide John and Covenant University, Theses (2023) STRUCTURAL BEHAVIOUR OF FIRE-DAMAGED REINFORCED CONCRETE BEAMS RETROFITTED WITH BAMBOO FIBRE LAMINATE. Masters thesis, Covenant University Ota.

Akinsiku, A.A. (2017) GREEN SYNTHESIS OF CAPPED SILVER NANOPARTICLES AND THEIR HYBRIDS: ANTIMICROBIAL AND OPTICAL PROPERTIES. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Covenant University, Ota, Nigeria..

Akinwumi, I. I. and Covenant University, Theses (2017) REMOVAL OF LEAD, CADMIUM AND NICKEL BY SAWDUST-MODIFIED TROPICAL CLAY FOR USE AS LANDFILL LINER MATERIAL. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Covenant University Ota.

Alalade, G. M and Covenant University, Theses (2017) THE PEDAGOGY OF ARCHITECTURAL STRUCTURES IN SELECTED UNIVERSITIES IN SOUTHWEST, NIGERIA. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, COVENANT UNIVERSITY.

Aluko, Olalekan Michael and Covenant University, Theses (2022) EFFECT OF SIC-GRAPHITE REINFORCEMENT AND TEMPERATURE ON THE MECHANICAL PROPERTIES OF AA7075 ALUMINIUM ALLOY. Masters thesis, Covenant University Ota.

Anyim, Justus Tochukwu and Covenant University, Theses (2023) PREDICTION OF INDUCTION MOTOR FAULTS USING MACHINE LEARNING. Masters thesis, Covenant University Ota.

Awoyera, P. O. and Covenant University, Theses (2018) Mechanical and microstructural characterization of ceramic-laterized concrete composite. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Covenant University, Ota, Nigeria.

Ayinde, Oluseyi kazeem and Covenant University, Theses (2016) DESIGN AND DEVELOPMENT OF THE STATIC BODY OF A SOLAR POWERED ELECTRIC SHUTTLE. Other thesis, COVENANT UNIVERSITY.

Busari, A. A. and Covenant University, Theses (2018) DEVELOPMENT OF METAKAOLIN SELF-COMPACTING CONCRETE FOR PAVEMENT. ["eprint_fieldopt_thesis_type_engd" not defined] thesis, COVENANT UNIVERSITY.

DANTONG, DANG GYANG and Covenant, University (2020) EMPLOYERS’ PERCEPTION ON THE EMPLOYABILITY SKILLS OF BUILDING TECHNOLOGY GRADUATES IN THE CONSTRUCTION INDUSTRY. Masters thesis, COVENANT UNIVERSITY.

DAUDU, AFAH TOYIN and Covenant University, Theses (2020) EVALUATION AND IMPROVEMENT OF POWER QUALITY ON DISTRIBUTION NETWORK: A CASE STUDY OF COVENANT UNIVERSITY, OTA. Masters thesis, Covenant University.

Dirisu, J. O. and Covenant University, Theses (2020) COMPOSITE MATERIALS FOR ECO-FRIENDLY FIRE RETARDANT BUILDING CEILINGS FOR TROPICAL REGION. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, COVENANT UNIVERSITY.

EFAJEMUE, AKPOVI EWAREZI and Covenant University, Theses (2021) THERMOPHILES BIOSURFACTANT PRODUCTION AND POTENTIAL APPLICATION IN MICROBIAL ENHANCED OIL RECOVERY FOR HIGH- TEMPERATURE RESERVOIRS. Masters thesis, COVENANT UNIVERSITY.

ENYOMEJI, ADEMU IDAMA and Covenant University, Theses (2018) INVESTIGATING THE VIABILITY OF HYDROGEN PRODUCTION FROM SODIUM BOROHYDRIDE USING ORGANIC ACIDS AND EXTRACTS FROM SPOILT CITRUS FRUIT. Masters thesis, Covenant University.

EPELLE, PROMISE SOKARI and Covenant University, Theses (2022) HYDRAULIC PROPERTIES AND WATER-REPELLENCY OF ORGANOSILANE-TREATED SOIL AS AN ALTERNATIVE MATERIAL UTILISED IN A LANDFILL LINER SYSTEM. Masters thesis, COVENANT UNIVERSITY.

Emuowhochere, Oghenevwegba and Covenant University, Theses (2022) DEVELOPMENT OF AN ANN-BASED DEFECT DETECTION SYSTEM FOR PROCESS QUALITY OPTIMISATION IN BOTTLING INDUSTRY. Masters thesis, Covenant University Ota.

FAGBENLE, EMMANUEL OLABAYO and Covenant University, Theses (2021) BIODIGESTION OF CASSAVA PEEL WASTE, COW DUNG AND OIL PALM FUEL ASH FOR BIOGAS PRODUCTION. Masters thesis, covenant university.

IDAM, EGELEONUWA and Covenant University, Theses (2017) ASSESSMENT OF PHYSICAL AND CHEMICAL PROPERTIES OF FOUR CEMENT BRANDS USED IN NIGERIA. Masters thesis, COVENANT UNIVERSITY.

IWUAJOKU, SANDRA CHIAMAKA and Covenant University, Theses (2020) PERFORMANCE EVALUATION OF BIODIESEL PRODUCED FROM WASTE TYRE PYROLYTIC OIL AS LUBRICANT ADDITIVE FOR REDUCING LUBRICITY COEFFICIENT IN WATER-BASED MUD. Masters thesis, Covenant University.

Iroham, C.O. (2012) HEURISTICS IN PROPERTY INVESTMENT VALUATION IN NIGERIA. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Covenant University, Ota..

JOHN, MAZI FELIX and Covenant University, Theses (2017) EXPERIMENTAL STUDY OF ENHANCED OIL RECOVERY USING SILICA NANOPARTICLES AND GUM ARABIC ON MEDIUM CRUDE OIL AND CORES OF THE NIGER DELTA. Masters thesis, COVENANT UNIVERSITY.

JOHN, TEMITOPE MERCY and Covenant University, Theses (2017) DEVELOPMENT OF A SOLAR SYSTEM DESIGN CALCULATOR. Masters thesis, COVENANT UNIVERSITY.

Joseph, O. O and Covenant University, Theses (2016) CORROSION AND FRACTURE BEHAVIOUR OF API-5L X65 AND MICRO-ALLOYED STEELS IN FUEL ETHANOL ENVIRONMENTS. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, COVENANT UNIVERSITY.

MUGHOLE, KALIMUMBALO DANIELLA and Covenant University, Theses (2023) DEVELOPMENT OF A FEDERATED LEARNING-BASED MALWARE DETECTION MODEL FOR INTERCONNECTED CLOUD INFRASTRUCTURES. Masters thesis, COVENANT UNIVERSITY.

Mosobalaje, O. O. (2020) THEORETICAL JUSTIFICATIONS FOR RATE DECLINE TRENDS IN SOLUTION-GAS DRIVE RESERVOIRS, AND RESERVOIR PROPERTY ESTIMATION USING PRODUCTION DATA. Masters thesis, AFRICAN UNIVERSITY OF SCIENCE AND TECHNOLOGY, ABUJA.

Mosobalaje, O. O. (2011) THEORETICAL JUSTIFICATIONS FOR RATEDECLINE TRENDS IN SOLUTION-GAS DRIVE RESERVOIRS, AND RESERVOIR PROPERTY ESTIMATION USING PRODUCTION DATA. Masters thesis, AFRICAN UNIVERSITY OF SCIENCE AND TECHNOLOGY, ABUJA.

NWORGU, TOBECHUKWU AUSTIN and Covenant University, Theses (2021) STRUCTURAL RETROFITTING OF CORRODED REINFORCED CONCRETE BEAMS USING BAMBOO FIBER LAMINATE. Masters thesis, COVENANT UNIVERSITY.

Nnamba, Ogechi Joy and Covenant University, Theses (2022) EFFECT OF CASSIA FISTULA AND CITRUS SINESIS ON THE ELECTRO-KINETIC DEPOSITION OF ZINC ON MILD STEEL. Masters thesis, Covenant University Ota.

OBIAZI, OGHORCHUKWUYEM ORIEKOSE and Covenant University, Theses (2023) HYBRID DYNAMIC LOAD BALANCING ALGORITHM FOR CLOUD PERFORMANCE IMPROVEMENT. Masters thesis, COVENANT UNIVERSITY.

OBOMIGHIE, EKHAYEMHE MOSES and Covenant University, Theses (2018) CONSTRUCTION AND IMPLEMENTATION OF A PANIC BUTTON ALARM SYSTEM. Masters thesis, COVENANT UNIVERSITY.

OGUNDARE, OLUWATOSIN JACOBS and Covenant University, Theses (2020) POTENTIAL RECOVERY OF BIOGAS FROM CITRUS AURANTTFOLIA WASTE (LIME WASTE). Masters thesis, COVENANT UNIVERSITY.

OGUNLEYE, OLUWASIKEMI GLORIA and Covenant University, Theses (2018) THE ENERGY CONSUMPTION PATTERNS OF AC AND DC SOURCES OF ENERGY VIEWED FROM THE PERSPECTIVES OF COST AND EFFICIENCY. Masters thesis, COVENANT UNIVERSITY.

OGUNWOLE, ADEWALE DANIEL and Covenant University, Theses (2020) GEOTECHNICAL CHARACTERISATION OF SELECTED SHALLOW-MARINE SOILS IN SOUTHERN NIGERIA FOR QUAY WALL CONSTRUCTION. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Covenant University.

OLAYINKA, CLEMENT OLOKE (2016) PERFORMANCE EVALUATION OF CO-OPERATIVE SOCIETIES’ HOUSING PROVISION IN LAGOS STATE, NIGERIA. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Covenant University, Nigeria..

OLAYIWOLA, JOY OLUWABUKOLA and Covenant University, Theses (2022) CLASSIFICATION OF CHEST X-RAY IMAGES OF LUNG DISEASES USING DEEP CONVOLUTIONAL NEURAL NETWORK. Masters thesis, Covenant University.

OLETUBỌ, ADEBAYỌ ADEBOYE and Covenant University, Theses (2022) INFLUENCE OF STRATEGIC MANAGEMENT AND PERSONALITY TRAITS ON PERFORMANCE OF ESTATE SURVEYING AND VALUATION FIRMS IN SOUTHWEST, NIGERIA. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, COVENANT UNIVERSITY.

OLOMUKORO, OBOROGHENE TOPE and Covenant University, Theses (2020) CORROSION INHIBITION PERFORMANCE OF ROSEMARY OIL ON CARBON STEEL IN ACID AND SALINE ENVIRONMENTS. Masters thesis, COVENANT UNIVERSITY.

OLUWAFEMI, JOHN OLUWATOBI and Covenant University, Theses (2018) PROBABILISTIC SEISMIC HAZARD ANALYSIS AND THE SIMULATED RESPONSE OF BUILDINGS TO EARTHQUAKE IN NIGERIA. Masters thesis, COVENANT UNIVERSITY.

OMILOLI, KOTO ANDREW and Covenant University, Theses (2022) ROBUST ESTIMATION OF THE STATE OF CHARGE IN A LITHIUM-ION BATTERY FOR A BATTERY MANAGEMENT SYSTEM. Masters thesis, COVENANT UNIVERSITY.

OMUH, Ignatius Owoicho and Covenant University, Theses (2016) COMPRESSIVE STRENGTH CHARACTERISTICS OF CONCRETE BASED ON SITE PRODUCTION PRACTICES. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, COVENANT UNIVERSITY.

ONI, ANTHONIA AYEGHUAO and Covenant University, Theses (2017) WORK-LIFE BALANCE OF OPERATIVES IN THE BUILDING INDUSTRY. Other thesis, COVENANT UNIVERSITY.

ONI , OLATOYESE ZACCHEUS and Covenant University, Theses (2015) QUALITY MANAGEMENT PRACTICES OF BUILDING CONSTRUCTION FIRM IN OYO STATE NIGERIA. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, COVENANT UNIVERSITY.

ORUMA, SAMSON OGHENEOVO and Covenant University, Theses (2021) DEVELOPMENT OF A LIGHTWEIGHT MODEL FOR COVID-19 FACE MASK WEARING-POSITION DETECTION. Masters thesis, Covenant University.

Ogunde, Ayodeji (2013) PERFORMANCE EVALUATION OF STATE SUBSIDIZED HOUSING SCHEME: A CASE STUDY OF OGUN STATE HOUSING PROJECTS. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Covenant University, Ota..

Ojelabi, Rapheal A. and Covenant University, Theses (2019) EVALUATION OF GOVERNMENT PARTICIPATION IN PUBLIC PRIVATE PARTNERSHIP PROCUREMENT SYSTEM FOR CONSTRUCTION PROJECT DELIVERY IN NIGERIA. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, COVENANT UNIVERSITY.

Ojukwu, Chukwuebuka N. and Covenant University, Theses (2024) ANAEROBIC DIGESTER APPLICATION TO PRODUCE ORGANIC MANURE FROM CASSAVA PEELS AND PALM OIL SLUDGE FOR SUSTAINABLE CROP GROWTH. Masters thesis, Covenant University.

Orovwode, H. E. (2015) The Optimization of Generating Plants in a Microgrid: The Covenant University Electric Power Network Experience. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Covenant University, Nigeria..

Oyeyipo, Opeyemi and Covenant University, Theses (2019) INFLUENCE OF STAKEHOLDERS’ RELATIONSHIP MANAGEMENT ON-TIME AND COST PERFORMANCE OF TERTIARY EDUCATIONAL BUILDING PROJECTS IN SOUTH-WEST, NIGERIA. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, COVENANT UNIVERSITY.

PAUL, JOAN EZRA and Covenant University, Theses (2022) SHORT-TERM MOBILE DATA TRAFFIC FORECASTING: A CASE STUDY OF KADUNA STATE, NIGERIA. Masters thesis, COVENANT UNIVERSITY.

POPOOLA, SEGUN ISAIAH and Covenant University, Theses (2018) MACHINE LEARNING-BASED PATH LOSS MODELS FOR HETEROGENEOUS RADIO NETWORK PLANNING IN A SMART CAMPUS. Masters thesis, COVENANT UNIVERSITY.

SALAMI, FAITH IFEDOLA and Covenant University, Theses (2023) CLASSIFICATION OF CASSAVA LEAF DISEASES USING DEEP LEARNING MODELS. Masters thesis, COVENANT UNIVERSITY.

SALAWU, ENESI YEKINI and Covenant University, Theses (2020) DEVELOPMENT OF A SPUR GEAR FROM CARBURISED CAST IRON FOR APPLICATION IN BOTTLING MACHINES. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, COVENANT UNIVERSITY.

SIMONYAN, EMMANUEL OLUWATOBI and Covenant University, Theses (2022) CLASSIFICATION OF BREAST CANCER HISTOPATHOLOGY IMAGES USING A CONVOLUTIONAL NEURAL NETWORK MODEL. Masters thesis, Covenant University.

SOWUNMI, AKINLEYE OLAMILEKAN and Covenant University, Theses (2021) PERFORMANCE AND IMPACT OF POLYMER NANOCOMPOSITES ON ENHANCED OIL RECOVERY. Masters thesis, COVENANT UNIVERSITY.

SOYEMI, ADEBOLA OLUYEMISI and Covenant University, Theses (2020) ARTIFICIAL NEURAL NETWORK BASED VOLTAGE COLLAPSE PREDICTION FOR POWER SYSTEM NETWORKS. Masters thesis, COVENANT UNIVERSITY.

Samuel, I. A. and Covenant University, Theses (2017) A NEW VOLTAGE STABILITY INDEX FOR PREDICTING VOLTAGE COLLAPSE IN ELECTRICAL POWER SYSTEM NETWORKS. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, COVENANT UNIVERSITY,.

TOGI, BARIDO and Covenant University, Theses Masters (2024) SUSTAINABLE LANDSCAPE DESIGN AND USER SATISFACTION IN THE DESIGN OF A SHOPPING MALL IN PORT-HARCOURT, RIVERS STATE, NIGERIA. Masters thesis, Covenant University.

TUMBA, MASI LASSA and Covenant University, Theses (2018) MECHANICAL PROPERTIES OF LIGHT-WEIGHT SELF COMPACTING CONCRETE USING POFA AS PARTIAL REPLACEMENT FOR CEMENT. Masters thesis, COVENANT UNIVERSITY.

Tunji-Olayeni, P .F and Covenant University, Theses (2015) DEVELOPMENT OF COMPETITIVENESS INDICES FOR INDIGENOUS CONSTRUCTION FIRMS IN NIGERIA. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, COVENANT UNIVERSITY.

UZOR, CHUKWUNEDUM and Covenant University, Theses (2018) MODELS TO PREDICT AND OPTIMIZE MACHINE GUARD OPERATOR’S COMPLIANCE ACTIVITIES IN A BOTTLING PROCESS PLANT. Masters thesis, COVENANT UNIVERSITY.

WAGBARA, OBINDAH (2000) PRICING AND GEOPOLITICS IN INTERNATIONAL GAS TRADE …could the Gas Exporting Countries Forum unify price regimes? ["eprint_fieldopt_thesis_type_phd" not defined] thesis, University of Dundee.

Williams, Joseph Ajuwaeze and Covenant University, Theses (2022) EFFECT OF MAIZE HUSK REINFORCEMENT ON THE MECHANICAL PROPERTIES OF 1170 ALUMINIUM. Masters thesis, Covenant University Ota.

Other

Atayero, A. A. (2020) STATE OF THE UNIVERSITY. Covenant University. (Submitted)

Covenant University, Scival (2018) Carbon steel; Corrosion; mild steel T.84743. Covenant University. (Unpublished)

Covenant University, Scival (2018) Compressive strength; Concretes; Cements T.52456. Covenant University. (Unpublished)

Covenant University, Scival (2018) Electricity; Energy policy; sustainable energy T.37474. Covenant University. (Unpublished)

Covenant University, Scival (2018) Reinforced concrete; Concretes; simulated concrete T.1205. Covenant University. (Unpublished)

Idachaba, F.E. (1998) Instability of National Agricultural Research Systems in Sub-Saharan Africa:Research Report Lessons from Nigeria. International Service for National Agricultural Research.

This list was generated on Wed Nov 20 18:45:41 2024 WAT.